! Started logfile: /scr/pima/rv119_uvs/J0513-2159_S_dfm.log on Sun Dec 17 11:34:15 2017 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23275 obs /scr/pima/rv119_uvs/J0513-2159_S_uva.fits ! Reading UV FITS file: /scr/pima/rv119_uvs/J0513-2159_S_uva.fits ! AN table 1: 44 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.977778 visibilities/baseline/integration-bin. ! Found source: J0513-2159 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23275e+09 8e+06 1 8e+06 ! 02 2 2.26275e+09 8e+06 1 8e+06 ! 03 3 2.35275e+09 8e+06 1 8e+06 ! 04 4 2.37275e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 7744 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0513-2159_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.076244Jy sigma=16.050728 ! Fit after self-cal, rms=0.676950Jy sigma=10.363455 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.265 mas, bmaj=6.18 mas, bpa=-2.832 degrees ! Estimated noise=0.921535 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.216053 Jy ! Component: 100 - total flux cleaned = 0.306031 Jy ! Total flux subtracted in 100 components = 0.306031 Jy ! Clean residual min=-0.020238 max=0.044467 Jy/beam ! Clean residual mean=-0.000062 rms=0.005854 Jy/beam ! Combined flux in latest and established models = 0.306031 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.306031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.231881Jy sigma=3.157909 ! Fit after self-cal, rms=0.231689Jy sigma=3.155312 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0531098 Jy ! Component: 100 - total flux cleaned = 0.087005 Jy ! Total flux subtracted in 100 components = 0.087005 Jy ! Clean residual min=-0.014847 max=0.021086 Jy/beam ! Clean residual mean=-0.000039 rms=0.004615 Jy/beam ! Combined flux in latest and established models = 0.393036 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 22 components and 0.393036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200634Jy sigma=2.683531 ! Fit after self-cal, rms=0.200536Jy sigma=2.682704 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.88 mas, bmaj=7.323 mas, bpa=-1.859 degrees ! Estimated noise=0.562834 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0569493 Jy ! Component: 100 - total flux cleaned = 0.0866576 Jy ! Component: 150 - total flux cleaned = 0.104475 Jy ! Component: 200 - total flux cleaned = 0.115273 Jy ! Total flux subtracted in 200 components = 0.115273 Jy ! Clean residual min=-0.020191 max=0.033059 Jy/beam ! Clean residual mean=-0.000032 rms=0.006187 Jy/beam ! Combined flux in latest and established models = 0.50831 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 52 components and 0.50831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182163Jy sigma=2.429359 ! Fit after self-cal, rms=0.182124Jy sigma=2.428934 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.88 x 7.323 at -1.859 degrees (North through East) ! Clean map min=-0.019711 max=0.33197 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.16 HN 1.23 KP 0.99 ! LA 1.00 MK 1.11 NL 1.12 OV 1.01 ! PT 0.99 SC 1.28 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.18 HN 1.20 KP 0.97 ! LA 0.99 MK 1.05 NL 1.09 OV 1.01 ! PT 0.99 SC 1.25 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.12 HN 1.13 KP 0.39 ! LA 0.94 MK 1.07 NL 1.00* OV 1.02 ! PT 0.96 SC 0.61 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.16 HN 1.15 KP 0.99 ! LA 0.98 MK 0.95 NL 1.06 OV 0.99 ! PT 0.99 SC 1.22 ! ! ! Fit before self-cal, rms=0.182124Jy sigma=2.428934 ! Fit after self-cal, rms=0.083627Jy sigma=1.315489 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.876 mas, bmaj=7.333 mas, bpa=-0.6953 degrees ! Estimated noise=0.561674 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6.5, -4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0178272 Jy ! Component: 100 - total flux cleaned = 0.0241987 Jy ! Component: 150 - total flux cleaned = 0.0249406 Jy ! Component: 200 - total flux cleaned = 0.0255816 Jy ! Total flux subtracted in 200 components = 0.0255816 Jy ! Clean residual min=-0.008769 max=0.010382 Jy/beam ! Clean residual mean=-0.000023 rms=0.001887 Jy/beam ! Combined flux in latest and established models = 0.533891 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 69 components and 0.533891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079478Jy sigma=1.248056 ! Fit after self-cal, rms=0.079468Jy sigma=1.238268 ! Inverting map ! Added new window around map position (12.5, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100875 Jy ! Component: 100 - total flux cleaned = 0.0134218 Jy ! Component: 150 - total flux cleaned = 0.0144 Jy ! Component: 200 - total flux cleaned = 0.0145732 Jy ! Total flux subtracted in 200 components = 0.0145732 Jy ! Clean residual min=-0.008044 max=0.007092 Jy/beam ! Clean residual mean=-0.000010 rms=0.001572 Jy/beam ! Combined flux in latest and established models = 0.548464 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 87 components and 0.548464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077720Jy sigma=1.216034 ! Fit after self-cal, rms=0.077557Jy sigma=1.214200 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077557Jy sigma=1.214200 ! Fit after self-cal, rms=0.073362Jy sigma=1.165280 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.842 mas, bmaj=7.329 mas, bpa=-0.5144 degrees ! Estimated noise=0.554354 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00590736 Jy ! Component: 100 - total flux cleaned = 0.00774257 Jy ! Component: 150 - total flux cleaned = 0.00844994 Jy ! Component: 200 - total flux cleaned = 0.00886559 Jy ! Total flux subtracted in 200 components = 0.00886559 Jy ! Clean residual min=-0.003406 max=0.004317 Jy/beam ! Clean residual mean=-0.000006 rms=0.000878 Jy/beam ! Combined flux in latest and established models = 0.55733 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 107 components and 0.55733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072662Jy sigma=1.157221 ! Fit after self-cal, rms=0.072621Jy sigma=1.156335 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (67.5, 115.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00244805 Jy ! Component: 100 - total flux cleaned = 0.00310662 Jy ! Component: 150 - total flux cleaned = 0.00329406 Jy ! Component: 200 - total flux cleaned = 0.00354149 Jy ! Total flux subtracted in 200 components = 0.00354149 Jy ! Clean residual min=-0.003211 max=0.003679 Jy/beam ! Clean residual mean=-0.000005 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 0.560871 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 123 components and 0.560871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072298Jy sigma=1.150681 ! Fit after self-cal, rms=0.072277Jy sigma=1.150297 ! Inverting map ! Added new window around map position (123, 76). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0024556 Jy ! Component: 100 - total flux cleaned = 0.00289046 Jy ! Component: 150 - total flux cleaned = 0.00296604 Jy ! Component: 200 - total flux cleaned = 0.00296337 Jy ! Total flux subtracted in 200 components = 0.00296337 Jy ! Clean residual min=-0.003037 max=0.002809 Jy/beam ! Clean residual mean=-0.000004 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.563835 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 143 components and 0.563835 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072059Jy sigma=1.146707 ! Fit after self-cal, rms=0.072042Jy sigma=1.146574 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072042Jy sigma=1.146574 ! Fit after self-cal, rms=0.071433Jy sigma=1.142966 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.832 mas, bmaj=7.324 mas, bpa=-0.3701 degrees ! Estimated noise=0.551609 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00172642 Jy ! Component: 100 - total flux cleaned = 0.00186593 Jy ! Component: 150 - total flux cleaned = 0.00193195 Jy ! Component: 200 - total flux cleaned = 0.0019325 Jy ! Total flux subtracted in 200 components = 0.0019325 Jy ! Clean residual min=-0.002748 max=0.002581 Jy/beam ! Clean residual mean=-0.000004 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 0.565767 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 154 components and 0.565767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071290Jy sigma=1.141017 ! Fit after self-cal, rms=0.071283Jy sigma=1.140938 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000285019 Jy ! Component: 100 - total flux cleaned = 0.00017551 Jy ! Component: 150 - total flux cleaned = 0.000123422 Jy ! Component: 200 - total flux cleaned = 7.35211e-05 Jy ! Total flux subtracted in 200 components = 7.35211e-05 Jy ! Clean residual min=-0.002495 max=0.002425 Jy/beam ! Clean residual mean=-0.000004 rms=0.000609 Jy/beam ! Combined flux in latest and established models = 0.565841 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 163 components and 0.565841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071203Jy sigma=1.139747 ! Fit after self-cal, rms=0.071194Jy sigma=1.139720 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071194Jy sigma=1.139720 ! Fit after self-cal, rms=0.071045Jy sigma=1.139422 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.74 mas, bmaj=16.43 mas, bpa=3.198 degrees ! Estimated noise=0.756323 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000479179 Jy ! Component: 100 - total flux cleaned = 0.000578799 Jy ! Component: 150 - total flux cleaned = 0.000500989 Jy ! Component: 200 - total flux cleaned = 0.000432325 Jy ! Total flux subtracted in 200 components = 0.000432325 Jy ! Clean residual min=-0.002457 max=0.001990 Jy/beam ! Clean residual mean=-0.000008 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 0.566273 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 186 components and 0.566273 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071017Jy sigma=1.139278 ! Fit after self-cal, rms=0.071016Jy sigma=1.139220 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000149431 Jy ! Component: 100 - total flux cleaned = 5.54021e-05 Jy ! Component: 150 - total flux cleaned = -3.90814e-06 Jy ! Component: 200 - total flux cleaned = -8.83808e-05 Jy ! Total flux subtracted in 200 components = -8.83808e-05 Jy ! Clean residual min=-0.002378 max=0.001924 Jy/beam ! Clean residual mean=-0.000008 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 0.566185 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 197 components and 0.566185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070997Jy sigma=1.139205 ! Fit after self-cal, rms=0.070995Jy sigma=1.139189 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.828 mas, bmaj=7.318 mas, bpa=-0.2801 degrees ! Estimated noise=0.550737 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.828 x 7.318 at -0.2801 degrees (North through East) ! Clean map min=-0.0022661 max=0.32704 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.235 mas, bmaj=6.165 mas, bpa=-1.852 degrees ! Estimated noise=0.935429 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.220069 Jy ! Component: 100 - total flux cleaned = 0.315083 Jy ! Component: 150 - total flux cleaned = 0.370733 Jy ! Component: 200 - total flux cleaned = 0.407087 Jy ! Total flux subtracted in 200 components = 0.407087 Jy ! Clean residual min=-0.010620 max=0.020186 Jy/beam ! Clean residual mean=-0.000039 rms=0.002797 Jy/beam ! Combined flux in latest and established models = 0.407087 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.407087 Jy ! Inverting map and beam ! Estimated beam: bmin=2.828 mas, bmaj=7.318 mas, bpa=-0.2801 degrees ! Estimated noise=0.550737 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0492461 Jy ! Component: 100 - total flux cleaned = 0.0779698 Jy ! Component: 150 - total flux cleaned = 0.0968088 Jy ! Component: 200 - total flux cleaned = 0.109975 Jy ! Total flux subtracted in 200 components = 0.109975 Jy ! Clean residual min=-0.004426 max=0.007611 Jy/beam ! Clean residual mean=-0.000038 rms=0.001594 Jy/beam ! Combined flux in latest and established models = 0.517062 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 72 components and 0.517062 Jy ! Inverting map ! Added new window around map position (-3, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00982197 Jy ! Component: 100 - total flux cleaned = 0.0173265 Jy ! Component: 150 - total flux cleaned = 0.023148 Jy ! Component: 200 - total flux cleaned = 0.0278126 Jy ! Total flux subtracted in 200 components = 0.0278126 Jy ! Clean residual min=-0.003076 max=0.003966 Jy/beam ! Clean residual mean=-0.000016 rms=0.000841 Jy/beam ! Combined flux in latest and established models = 0.544875 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 117 components and 0.544875 Jy ! Inverting map ! Added new window around map position (33.5, -54.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00415905 Jy ! Component: 100 - total flux cleaned = 0.00743577 Jy ! Component: 150 - total flux cleaned = 0.0102156 Jy ! Component: 200 - total flux cleaned = 0.0125913 Jy ! Total flux subtracted in 200 components = 0.0125913 Jy ! Clean residual min=-0.002560 max=0.002723 Jy/beam ! Clean residual mean=-0.000008 rms=0.000638 Jy/beam ! Combined flux in latest and established models = 0.557466 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 153 components and 0.557466 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.74 mas, bmaj=16.43 mas, bpa=3.198 degrees ! Estimated noise=0.756323 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00344379 Jy ! Component: 100 - total flux cleaned = 0.00560872 Jy ! Component: 150 - total flux cleaned = 0.0064577 Jy ! Component: 200 - total flux cleaned = 0.00701689 Jy ! Total flux subtracted in 200 components = 0.00701689 Jy ! Clean residual min=-0.001989 max=0.002051 Jy/beam ! Clean residual mean=-0.000010 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.564483 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000440396 Jy ! Component: 100 - total flux cleaned = 0.000746663 Jy ! Component: 150 - total flux cleaned = 0.000983083 Jy ! Component: 200 - total flux cleaned = 0.00112943 Jy ! Total flux subtracted in 200 components = 0.00112943 Jy ! Clean residual min=-0.001942 max=0.001882 Jy/beam ! Clean residual mean=-0.000009 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.565612 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 197 components and 0.565612 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.828 mas, bmaj=7.318 mas, bpa=-0.2801 degrees ! Estimated noise=0.550737 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000778414 Jy ! Component: 100 - total flux cleaned = -0.000718219 Jy ! Component: 150 - total flux cleaned = -0.000664869 Jy ! Component: 200 - total flux cleaned = -0.000570976 Jy ! Total flux subtracted in 200 components = -0.000570976 Jy ! Clean residual min=-0.002149 max=0.002383 Jy/beam ! Clean residual mean=-0.000003 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.565041 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 219 components and 0.565041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070711Jy sigma=1.138584 ! Fit after self-cal, rms=0.070654Jy sigma=1.137866 wmodel J0513-2159_S_map.mod ! Writing 219 model components to file: J0513-2159_S_map.mod wobs J0513-2159_S_uvs.fits ! Writing UV FITS file: J0513-2159_S_uvs.fits wwins J0513-2159_S_map.win ! wwins: Wrote 7 windows to J0513-2159_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 8.88028e-05 Jy ! Component: 100 - total flux cleaned = 0.000270999 Jy ! Component: 150 - total flux cleaned = 0.000306009 Jy ! Component: 200 - total flux cleaned = 0.000272274 Jy ! Component: 250 - total flux cleaned = 0.000338817 Jy ! Component: 300 - total flux cleaned = 0.000403341 Jy ! Component: 350 - total flux cleaned = 0.000372401 Jy ! Component: 400 - total flux cleaned = 0.000403703 Jy ! Component: 450 - total flux cleaned = 0.000313128 Jy ! Component: 500 - total flux cleaned = 0.000313286 Jy ! Component: 550 - total flux cleaned = 0.000312935 Jy ! Component: 600 - total flux cleaned = 0.000255682 Jy ! Component: 650 - total flux cleaned = 0.000198826 Jy ! Component: 700 - total flux cleaned = 0.000115127 Jy ! Component: 750 - total flux cleaned = 6.03979e-05 Jy ! Component: 800 - total flux cleaned = 6.31488e-06 Jy ! Component: 850 - total flux cleaned = -7.31526e-05 Jy ! Component: 900 - total flux cleaned = -2.03106e-05 Jy ! Component: 950 - total flux cleaned = -2.07324e-05 Jy ! Component: 1000 - total flux cleaned = -9.74202e-05 Jy ! Component: 1050 - total flux cleaned = -0.000122258 Jy ! Component: 1100 - total flux cleaned = -0.000196598 Jy ! Component: 1150 - total flux cleaned = -0.000245323 Jy ! Component: 1200 - total flux cleaned = -0.000245509 Jy ! Component: 1250 - total flux cleaned = -0.000245335 Jy ! Component: 1300 - total flux cleaned = -0.000245765 Jy ! Component: 1350 - total flux cleaned = -0.000292899 Jy ! Component: 1400 - total flux cleaned = -0.00033935 Jy ! Component: 1450 - total flux cleaned = -0.000339555 Jy ! Component: 1500 - total flux cleaned = -0.000407544 Jy ! Component: 1550 - total flux cleaned = -0.000429697 Jy ! Component: 1600 - total flux cleaned = -0.000363075 Jy ! Component: 1650 - total flux cleaned = -0.000384987 Jy ! Component: 1700 - total flux cleaned = -0.000450339 Jy ! Component: 1750 - total flux cleaned = -0.00047159 Jy ! Component: 1800 - total flux cleaned = -0.000492696 Jy ! Component: 1850 - total flux cleaned = -0.000513649 Jy ! Component: 1900 - total flux cleaned = -0.000555719 Jy ! Component: 1950 - total flux cleaned = -0.000680634 Jy ! Component: 2000 - total flux cleaned = -0.000660185 Jy ! Component: 2050 - total flux cleaned = -0.000721357 Jy ! Component: 2100 - total flux cleaned = -0.000802467 Jy ! Component: 2150 - total flux cleaned = -0.000902484 Jy ! Component: 2200 - total flux cleaned = -0.000862937 Jy ! Component: 2250 - total flux cleaned = -0.00104089 Jy ! Component: 2300 - total flux cleaned = -0.00110006 Jy ! Component: 2350 - total flux cleaned = -0.00121707 Jy ! Component: 2400 - total flux cleaned = -0.0012554 Jy ! Component: 2450 - total flux cleaned = -0.00138931 Jy ! Component: 2500 - total flux cleaned = -0.00142704 Jy ! Component: 2550 - total flux cleaned = -0.00154024 Jy ! Component: 2600 - total flux cleaned = -0.00154053 Jy ! Component: 2650 - total flux cleaned = -0.00170772 Jy ! Component: 2700 - total flux cleaned = -0.00176299 Jy ! Component: 2750 - total flux cleaned = -0.00172628 Jy ! Component: 2800 - total flux cleaned = -0.00176266 Jy ! Component: 2850 - total flux cleaned = -0.00179872 Jy ! Component: 2900 - total flux cleaned = -0.00179867 Jy ! Component: 2950 - total flux cleaned = -0.00179867 Jy ! Component: 3000 - total flux cleaned = -0.00183379 Jy ! Component: 3050 - total flux cleaned = -0.00185142 Jy ! Component: 3100 - total flux cleaned = -0.00188619 Jy ! Component: 3150 - total flux cleaned = -0.00185135 Jy ! Component: 3200 - total flux cleaned = -0.00183408 Jy ! Component: 3250 - total flux cleaned = -0.00186827 Jy ! Component: 3300 - total flux cleaned = -0.00186845 Jy ! Component: 3350 - total flux cleaned = -0.00186857 Jy ! Component: 3400 - total flux cleaned = -0.0017846 Jy ! Component: 3450 - total flux cleaned = -0.00183475 Jy ! Component: 3500 - total flux cleaned = -0.00178483 Jy ! Component: 3550 - total flux cleaned = -0.00176831 Jy ! Component: 3600 - total flux cleaned = -0.00175194 Jy ! Component: 3650 - total flux cleaned = -0.00176831 Jy ! Component: 3700 - total flux cleaned = -0.00173587 Jy ! Component: 3750 - total flux cleaned = -0.0017036 Jy ! Component: 3800 - total flux cleaned = -0.00178404 Jy ! Component: 3850 - total flux cleaned = -0.00175201 Jy ! Component: 3900 - total flux cleaned = -0.0017044 Jy ! Component: 3950 - total flux cleaned = -0.00164118 Jy ! Component: 4000 - total flux cleaned = -0.00175119 Jy ! Component: 4050 - total flux cleaned = -0.0016571 Jy ! Total flux subtracted in 4096 components = -0.00168834 Jy ! Clean residual min=-0.001010 max=0.000874 Jy/beam ! Clean residual mean=-0.000000 rms=0.000282 Jy/beam ! Combined flux in latest and established models = 0.563353 Jy keep ! Adding 305 model components to the UV plane model. ! The established model now contains 524 components and 0.563353 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv119_uvs/J0513-2159_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.828 x 7.318 at -0.2801 degrees (North through East) ! Clean map min=-0.0018903 max=0.33337 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv119_uvs/J0513-2159_S_map.fits wmodel /scr/pima/rv119_uvs/J0513-2159_S_map.mod ! Writing 524 model components to file: /scr/pima/rv119_uvs/J0513-2159_S_map.mod wobs /scr/pima/rv119_uvs/J0513-2159_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv119_uvs/J0513-2159_S_uvs.fits wwins /scr/pima/rv119_uvs/J0513-2159_S_map.win ! wwins: Wrote 8 windows to /scr/pima/rv119_uvs/J0513-2159_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.333373 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000282309 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.254048 0.254048 0.508096 1.01619 2.03238 4.06477 8.12954 16.2591 32.5182 65.0363 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.333 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1180.88 quit ! Quitting program ! Log file /scr/pima/rv119_uvs/J0513-2159_S_dfm.log closed on Sun Dec 17 11:34:19 2017