! Started logfile: /scr/pima/rv119_uvs/J0349+4609_S_dfm.log on Sun Dec 17 11:33:44 2017 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23275 obs /scr/pima/rv119_uvs/J0349+4609_S_uva.fits ! Reading UV FITS file: /scr/pima/rv119_uvs/J0349+4609_S_uva.fits ! AN table 1: 8 integrations on 21 of 21 possible baselines. ! AN table 2: 6 integrations on 3 of 3 possible baselines. ! AN table 3: 7 integrations on 28 of 28 possible baselines. ! AN table 4: 40 integrations on 55 of 55 possible baselines. ! AN table 5: 21 integrations on 3 of 3 possible baselines. ! Apparent sampling: 0.455198 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0349+4609 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23275e+09 8e+06 1 8e+06 ! 02 2 2.26275e+09 8e+06 1 8e+06 ! 03 3 2.35275e+09 8e+06 1 8e+06 ! 04 4 2.37275e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 4816 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0349+4609_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 31 telescope corrections were flagged in sub-array 1. ! A total of 14 telescope corrections were flagged in sub-array 3. ! A total of 238 telescope corrections were flagged in sub-array 4. ! A total of 45 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 2. ! A total of 31 telescope corrections were flagged in sub-array 1. ! A total of 14 telescope corrections were flagged in sub-array 3. ! A total of 238 telescope corrections were flagged in sub-array 4. ! A total of 45 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 3. ! A total of 35 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 3. ! A total of 260 telescope corrections were flagged in sub-array 4. ! A total of 45 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 4. ! A total of 31 telescope corrections were flagged in sub-array 1. ! A total of 14 telescope corrections were flagged in sub-array 3. ! A total of 238 telescope corrections were flagged in sub-array 4. ! A total of 45 telescope corrections were flagged in sub-array 5. ! ! Fit before self-cal, rms=1.106026Jy sigma=18.804257 ! Fit after self-cal, rms=0.594544Jy sigma=10.330932 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.97 mas, bmaj=3.271 mas, bpa=-38.19 degrees ! Estimated noise=0.882244 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.306657 Jy ! Component: 100 - total flux cleaned = 0.391818 Jy ! Total flux subtracted in 100 components = 0.391818 Jy ! Clean residual min=-0.011110 max=0.038120 Jy/beam ! Clean residual mean=0.000016 rms=0.002587 Jy/beam ! Combined flux in latest and established models = 0.391818 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.391818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.199986Jy sigma=2.259204 ! Fit after self-cal, rms=0.199781Jy sigma=2.254039 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0457914 Jy ! Component: 100 - total flux cleaned = 0.073169 Jy ! Total flux subtracted in 100 components = 0.073169 Jy ! Clean residual min=-0.007466 max=0.017787 Jy/beam ! Clean residual mean=0.000015 rms=0.001863 Jy/beam ! Combined flux in latest and established models = 0.464987 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 31 components and 0.464987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178193Jy sigma=1.785605 ! Fit after self-cal, rms=0.177981Jy sigma=1.778087 ! Inverting map ! Added new window around map position (3.5, -1.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0208156 Jy ! Component: 100 - total flux cleaned = 0.0338739 Jy ! Total flux subtracted in 100 components = 0.0338739 Jy ! Clean residual min=-0.006883 max=0.010089 Jy/beam ! Clean residual mean=0.000013 rms=0.001632 Jy/beam ! Combined flux in latest and established models = 0.498861 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 47 components and 0.498861 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171651Jy sigma=1.650950 ! Fit after self-cal, rms=0.171500Jy sigma=1.645431 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111425 Jy ! Component: 100 - total flux cleaned = 0.0185312 Jy ! Total flux subtracted in 100 components = 0.0185312 Jy ! Clean residual min=-0.006588 max=0.008315 Jy/beam ! Clean residual mean=0.000012 rms=0.001553 Jy/beam ! Combined flux in latest and established models = 0.517392 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 53 components and 0.517392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168920Jy sigma=1.602723 ! Fit after self-cal, rms=0.168861Jy sigma=1.600619 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.426 mas, bmaj=3.762 mas, bpa=-23.13 degrees ! Estimated noise=0.737776 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0155659 Jy ! Component: 100 - total flux cleaned = 0.0245415 Jy ! Component: 150 - total flux cleaned = 0.0300988 Jy ! Component: 200 - total flux cleaned = 0.0336559 Jy ! Total flux subtracted in 200 components = 0.0336559 Jy ! Clean residual min=-0.007744 max=0.013402 Jy/beam ! Clean residual mean=0.000290 rms=0.002343 Jy/beam ! Combined flux in latest and established models = 0.551048 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 63 components and 0.551048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165960Jy sigma=1.572170 ! Fit after self-cal, rms=0.165858Jy sigma=1.568725 ! Inverting map ! Added new window around map position (20.5, -16). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0145475 Jy ! Component: 100 - total flux cleaned = 0.0234548 Jy ! Component: 150 - total flux cleaned = 0.0295735 Jy ! Component: 200 - total flux cleaned = 0.034016 Jy ! Total flux subtracted in 200 components = 0.034016 Jy ! Clean residual min=-0.007657 max=0.010802 Jy/beam ! Clean residual mean=0.000206 rms=0.002071 Jy/beam ! Combined flux in latest and established models = 0.585064 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 85 components and 0.585064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164154Jy sigma=1.529139 ! Fit after self-cal, rms=0.163850Jy sigma=1.523487 ! Inverting map ! Added new window around map position (-0.5, -13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0121144 Jy ! Component: 100 - total flux cleaned = 0.0194095 Jy ! Component: 150 - total flux cleaned = 0.0246355 Jy ! Component: 200 - total flux cleaned = 0.0287205 Jy ! Total flux subtracted in 200 components = 0.0287205 Jy ! Clean residual min=-0.007283 max=0.009506 Jy/beam ! Clean residual mean=0.000139 rms=0.001835 Jy/beam ! Combined flux in latest and established models = 0.613785 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 108 components and 0.613785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162396Jy sigma=1.497963 ! Fit after self-cal, rms=0.162198Jy sigma=1.494121 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.426 x 3.762 at -23.13 degrees (North through East) ! Clean map min=-0.0070536 max=0.39883 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.87 KP 1.10 LA 0.97 ! NL 1.08 ON 0.85 PT 0.97 ! ! A total of 18 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! KP 0.00* ON 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 HN 1.05 LA 0.98 NL 1.00 ! NY 0.89 ON 0.93 OV 1.03 SC 1.02 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.03 FD 1.03 HN 0.99 KP 0.99 ! LA 1.00 MK 0.97 NL 1.03 NY 1.07 ! OV 1.02 PT 0.98 SC 1.03 ! ! A total of 18 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! NY 0.00* ON 0.00* WZ 0.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.20 KP 1.05 LA 0.97 ! NL 1.16 ON 1.02 PT 0.97 ! ! A total of 18 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! KP 0.00* ON 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 HN 1.04 LA 1.02 NL 1.04 ! NY 0.89 ON 0.89 OV 1.01 SC 0.98 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.02 FD 1.03 HN 1.00 KP 1.01 ! LA 0.99 MK 0.99 NL 1.05 NY 1.16 ! OV 1.03 PT 0.99 SC 1.01 ! ! A total of 18 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! NY 0.00* ON 0.00* WZ 0.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.62 KP 0.88 LA 1.01 ! NL 1.00* ON 0.96 PT 0.95 ! ! A total of 18 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! KP 0.00* ON 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 HN 1.02 LA 0.97 NL 1.00* ! NY 1.03 ON 0.95 OV 1.01 SC 0.96 ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.03 FD 1.02 HN 1.07 KP 0.68 ! LA 0.98 MK 1.01 NL 1.00* NY 1.10 ! OV 1.00 PT 0.98 SC 0.99 ! ! A total of 18 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! NY 0.00* ON 0.00* WZ 0.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.04 KP 1.06 LA 0.94 ! NL 1.07 ON 1.09 PT 1.01 ! ! A total of 18 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! KP 0.00* ON 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 HN 0.99 LA 1.03 NL 1.00 ! NY 0.96 ON 0.96 OV 1.00 SC 1.03 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.05 FD 1.02 HN 1.00 KP 1.01 ! LA 1.00 MK 1.01 NL 1.02 NY 1.05 ! OV 1.03 PT 0.99 SC 1.03 ! ! A total of 18 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! NY 0.00* ON 0.00* WZ 0.00* ! ! ! Fit before self-cal, rms=0.162198Jy sigma=1.494121 ! Fit after self-cal, rms=0.111167Jy sigma=1.387148 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.448 mas, bmaj=3.796 mas, bpa=-26.87 degrees ! Estimated noise=0.746417 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (8, -27.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00894349 Jy ! Component: 100 - total flux cleaned = 0.0144348 Jy ! Component: 150 - total flux cleaned = 0.0167933 Jy ! Component: 200 - total flux cleaned = 0.0182645 Jy ! Total flux subtracted in 200 components = 0.0182645 Jy ! Clean residual min=-0.005563 max=0.006949 Jy/beam ! Clean residual mean=0.000003 rms=0.001496 Jy/beam ! Combined flux in latest and established models = 0.632049 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 131 components and 0.632049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110212Jy sigma=1.368405 ! Fit after self-cal, rms=0.109954Jy sigma=1.366708 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109954Jy sigma=1.366708 ! Fit after self-cal, rms=0.096041Jy sigma=1.208763 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.451 mas, bmaj=3.789 mas, bpa=-24.71 degrees ! Estimated noise=0.746698 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00238453 Jy ! Component: 100 - total flux cleaned = 0.00300908 Jy ! Component: 150 - total flux cleaned = 0.00367535 Jy ! Component: 200 - total flux cleaned = 0.00417795 Jy ! Total flux subtracted in 200 components = 0.00417795 Jy ! Clean residual min=-0.004531 max=0.005756 Jy/beam ! Clean residual mean=0.000041 rms=0.001140 Jy/beam ! Combined flux in latest and established models = 0.636227 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 144 components and 0.636227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095687Jy sigma=1.203614 ! Fit after self-cal, rms=0.095683Jy sigma=1.202762 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (10.5, -15). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00548846 Jy ! Component: 100 - total flux cleaned = 0.00684378 Jy ! Component: 150 - total flux cleaned = 0.00705777 Jy ! Component: 200 - total flux cleaned = 0.00705406 Jy ! Total flux subtracted in 200 components = 0.00705406 Jy ! Clean residual min=-0.004191 max=0.005073 Jy/beam ! Clean residual mean=0.000022 rms=0.001093 Jy/beam ! Combined flux in latest and established models = 0.643281 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 163 components and 0.643281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095260Jy sigma=1.194515 ! Fit after self-cal, rms=0.095214Jy sigma=1.193537 ! Inverting map ! Added new window around map position (16, -85). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00516742 Jy ! Component: 100 - total flux cleaned = 0.007637 Jy ! Component: 150 - total flux cleaned = 0.00900294 Jy ! Component: 200 - total flux cleaned = 0.00960886 Jy ! Total flux subtracted in 200 components = 0.00960886 Jy ! Clean residual min=-0.004174 max=0.004537 Jy/beam ! Clean residual mean=0.000006 rms=0.001037 Jy/beam ! Combined flux in latest and established models = 0.65289 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 182 components and 0.65289 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094761Jy sigma=1.187157 ! Fit after self-cal, rms=0.094707Jy sigma=1.186569 ! Inverting map ! Added new window around map position (30, -22). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00383606 Jy ! Component: 100 - total flux cleaned = 0.00550295 Jy ! Component: 150 - total flux cleaned = 0.00608445 Jy ! Component: 200 - total flux cleaned = 0.00632059 Jy ! Total flux subtracted in 200 components = 0.00632059 Jy ! Clean residual min=-0.004230 max=0.004340 Jy/beam ! Clean residual mean=-0.000012 rms=0.001016 Jy/beam ! Combined flux in latest and established models = 0.659211 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 203 components and 0.659211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094491Jy sigma=1.182130 ! Fit after self-cal, rms=0.094470Jy sigma=1.181956 ! Inverting map ! Added new window around map position (-0.5, -24). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0038189 Jy ! Component: 100 - total flux cleaned = 0.00419455 Jy ! Component: 150 - total flux cleaned = 0.00443505 Jy ! Component: 200 - total flux cleaned = 0.00458498 Jy ! Total flux subtracted in 200 components = 0.00458498 Jy ! Clean residual min=-0.004269 max=0.003953 Jy/beam ! Clean residual mean=-0.000023 rms=0.000996 Jy/beam ! Combined flux in latest and established models = 0.663796 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 214 components and 0.663796 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094292Jy sigma=1.176707 ! Fit after self-cal, rms=0.094277Jy sigma=1.176561 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094277Jy sigma=1.176561 ! Fit after self-cal, rms=0.086518Jy sigma=1.061370 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.456 mas, bmaj=3.782 mas, bpa=-22.97 degrees ! Estimated noise=0.744992 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.66251e-05 Jy ! Component: 100 - total flux cleaned = -0.000188552 Jy ! Component: 150 - total flux cleaned = -0.000113579 Jy ! Component: 200 - total flux cleaned = -0.00011508 Jy ! Total flux subtracted in 200 components = -0.00011508 Jy ! Clean residual min=-0.003459 max=0.003780 Jy/beam ! Clean residual mean=0.000046 rms=0.000828 Jy/beam ! Combined flux in latest and established models = 0.663681 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 237 components and 0.66368 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086354Jy sigma=1.058352 ! Fit after self-cal, rms=0.086339Jy sigma=1.058007 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (21.5, -56). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00393697 Jy ! Component: 100 - total flux cleaned = 0.00546094 Jy ! Component: 150 - total flux cleaned = 0.005382 Jy ! Component: 200 - total flux cleaned = 0.0055258 Jy ! Total flux subtracted in 200 components = 0.0055258 Jy ! Clean residual min=-0.003302 max=0.003451 Jy/beam ! Clean residual mean=0.000036 rms=0.000789 Jy/beam ! Combined flux in latest and established models = 0.669206 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 259 components and 0.669206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086058Jy sigma=1.053157 ! Fit after self-cal, rms=0.086017Jy sigma=1.052744 ! Inverting map ! Added new window around map position (35.5, -79.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00344795 Jy ! Component: 100 - total flux cleaned = 0.00522122 Jy ! Component: 150 - total flux cleaned = 0.00559269 Jy ! Component: 200 - total flux cleaned = 0.00573215 Jy ! Total flux subtracted in 200 components = 0.00573215 Jy ! Clean residual min=-0.003125 max=0.003068 Jy/beam ! Clean residual mean=0.000029 rms=0.000757 Jy/beam ! Combined flux in latest and established models = 0.674938 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 279 components and 0.674938 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085763Jy sigma=1.049092 ! Fit after self-cal, rms=0.085722Jy sigma=1.048791 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085722Jy sigma=1.048791 ! Fit after self-cal, rms=0.085294Jy sigma=1.047610 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.704 mas, bmaj=9.535 mas, bpa=50.72 degrees ! Estimated noise=1.00337 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00377602 Jy ! Component: 100 - total flux cleaned = 0.00625208 Jy ! Component: 150 - total flux cleaned = 0.00767037 Jy ! Component: 200 - total flux cleaned = 0.00845289 Jy ! Total flux subtracted in 200 components = 0.00845289 Jy ! Clean residual min=-0.003263 max=0.003458 Jy/beam ! Clean residual mean=0.000046 rms=0.000985 Jy/beam ! Combined flux in latest and established models = 0.683391 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 303 components and 0.683391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085253Jy sigma=1.046568 ! Fit after self-cal, rms=0.085208Jy sigma=1.046193 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165237 Jy ! Component: 100 - total flux cleaned = 0.00232506 Jy ! Component: 150 - total flux cleaned = 0.00286809 Jy ! Component: 200 - total flux cleaned = 0.00331205 Jy ! Total flux subtracted in 200 components = 0.00331205 Jy ! Clean residual min=-0.003263 max=0.003266 Jy/beam ! Clean residual mean=0.000031 rms=0.000947 Jy/beam ! Combined flux in latest and established models = 0.686703 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 320 components and 0.686703 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085193Jy sigma=1.045952 ! Fit after self-cal, rms=0.085176Jy sigma=1.045880 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.458 mas, bmaj=3.782 mas, bpa=-22.79 degrees ! Estimated noise=0.744816 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.458 x 3.782 at -22.79 degrees (North through East) ! Clean map min=-0.0029723 max=0.40267 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.014 mas, bmaj=3.271 mas, bpa=-36.16 degrees ! Estimated noise=0.904117 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.311743 Jy ! Component: 100 - total flux cleaned = 0.404562 Jy ! Component: 150 - total flux cleaned = 0.451521 Jy ! Component: 200 - total flux cleaned = 0.479939 Jy ! Total flux subtracted in 200 components = 0.479939 Jy ! Clean residual min=-0.005605 max=0.014917 Jy/beam ! Clean residual mean=0.000012 rms=0.001401 Jy/beam ! Combined flux in latest and established models = 0.479939 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.479939 Jy ! Inverting map and beam ! Estimated beam: bmin=3.458 mas, bmaj=3.782 mas, bpa=-22.79 degrees ! Estimated noise=0.744816 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0316877 Jy ! Component: 100 - total flux cleaned = 0.0528926 Jy ! Component: 150 - total flux cleaned = 0.0696894 Jy ! Component: 200 - total flux cleaned = 0.0835558 Jy ! Total flux subtracted in 200 components = 0.0835558 Jy ! Clean residual min=-0.004977 max=0.008964 Jy/beam ! Clean residual mean=0.000281 rms=0.001676 Jy/beam ! Combined flux in latest and established models = 0.563495 Jy ! Adding 81 model components to the UV plane model. ! The established model now contains 103 components and 0.563495 Jy ! Inverting map ! Added new window around map position (0.5, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117953 Jy ! Component: 100 - total flux cleaned = 0.021882 Jy ! Component: 150 - total flux cleaned = 0.0306697 Jy ! Component: 200 - total flux cleaned = 0.0384287 Jy ! Total flux subtracted in 200 components = 0.0384287 Jy ! Clean residual min=-0.004063 max=0.005488 Jy/beam ! Clean residual mean=0.000193 rms=0.001245 Jy/beam ! Combined flux in latest and established models = 0.601924 Jy ! Adding 78 model components to the UV plane model. ! The established model now contains 159 components and 0.601924 Jy ! Inverting map ! Added new window around map position (15.5, -23). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00710756 Jy ! Component: 100 - total flux cleaned = 0.0134694 Jy ! Component: 150 - total flux cleaned = 0.019269 Jy ! Component: 200 - total flux cleaned = 0.0245752 Jy ! Total flux subtracted in 200 components = 0.0245752 Jy ! Clean residual min=-0.003750 max=0.004529 Jy/beam ! Clean residual mean=0.000141 rms=0.001023 Jy/beam ! Combined flux in latest and established models = 0.626499 Jy ! Adding 89 model components to the UV plane model. ! The established model now contains 207 components and 0.626499 Jy ! Inverting map ! Added new window around map position (12, -4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.005233 Jy ! Component: 100 - total flux cleaned = 0.00979064 Jy ! Component: 150 - total flux cleaned = 0.0139796 Jy ! Component: 200 - total flux cleaned = 0.0178404 Jy ! Total flux subtracted in 200 components = 0.0178404 Jy ! Clean residual min=-0.003559 max=0.003665 Jy/beam ! Clean residual mean=0.000102 rms=0.000886 Jy/beam ! Combined flux in latest and established models = 0.644339 Jy ! Adding 85 model components to the UV plane model. ! The established model now contains 248 components and 0.644339 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.704 mas, bmaj=9.535 mas, bpa=50.72 degrees ! Estimated noise=1.00337 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00674779 Jy ! Component: 100 - total flux cleaned = 0.0122866 Jy ! Component: 150 - total flux cleaned = 0.0169902 Jy ! Component: 200 - total flux cleaned = 0.0210314 Jy ! Total flux subtracted in 200 components = 0.0210314 Jy ! Clean residual min=-0.002949 max=0.003765 Jy/beam ! Clean residual mean=0.000143 rms=0.001150 Jy/beam ! Combined flux in latest and established models = 0.66537 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00349092 Jy ! Component: 100 - total flux cleaned = 0.00653361 Jy ! Component: 150 - total flux cleaned = 0.00919925 Jy ! Component: 200 - total flux cleaned = 0.0115387 Jy ! Total flux subtracted in 200 components = 0.0115387 Jy ! Clean residual min=-0.002969 max=0.003259 Jy/beam ! Clean residual mean=0.000086 rms=0.000991 Jy/beam ! Combined flux in latest and established models = 0.676909 Jy ! Adding 167 model components to the UV plane model. ! The established model now contains 399 components and 0.676909 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.458 mas, bmaj=3.782 mas, bpa=-22.79 degrees ! Estimated noise=0.744816 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00150697 Jy ! Component: 100 - total flux cleaned = 0.00279362 Jy ! Component: 150 - total flux cleaned = 0.00376004 Jy ! Component: 200 - total flux cleaned = 0.0043448 Jy ! Total flux subtracted in 200 components = 0.0043448 Jy ! Clean residual min=-0.003033 max=0.003194 Jy/beam ! Clean residual mean=0.000026 rms=0.000718 Jy/beam ! Combined flux in latest and established models = 0.681254 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 425 components and 0.681254 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084765Jy sigma=1.041539 ! Fit after self-cal, rms=0.084703Jy sigma=1.039753 wmodel J0349+4609_S_map.mod ! Writing 425 model components to file: J0349+4609_S_map.mod wobs J0349+4609_S_uvs.fits ! Writing UV FITS file: J0349+4609_S_uvs.fits wwins J0349+4609_S_map.win ! wwins: Wrote 14 windows to J0349+4609_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000653636 Jy ! Component: 100 - total flux cleaned = 0.00103615 Jy ! Component: 150 - total flux cleaned = 0.001038 Jy ! Component: 200 - total flux cleaned = 0.00114089 Jy ! Component: 250 - total flux cleaned = 0.00123966 Jy ! Component: 300 - total flux cleaned = 0.00128649 Jy ! Component: 350 - total flux cleaned = 0.00118989 Jy ! Component: 400 - total flux cleaned = 0.00123671 Jy ! Component: 450 - total flux cleaned = 0.00119022 Jy ! Component: 500 - total flux cleaned = 0.00105282 Jy ! Component: 550 - total flux cleaned = 0.00109806 Jy ! Component: 600 - total flux cleaned = 0.00105257 Jy ! Component: 650 - total flux cleaned = 0.000786229 Jy ! Component: 700 - total flux cleaned = 0.000742118 Jy ! Component: 750 - total flux cleaned = 0.000567894 Jy ! Component: 800 - total flux cleaned = 0.000523977 Jy ! Component: 850 - total flux cleaned = 0.000310431 Jy ! Component: 900 - total flux cleaned = 0.000225661 Jy ! Component: 950 - total flux cleaned = 5.86483e-05 Jy ! Component: 1000 - total flux cleaned = 1.69998e-05 Jy ! Component: 1050 - total flux cleaned = -0.000106738 Jy ! Component: 1100 - total flux cleaned = -0.000147166 Jy ! Component: 1150 - total flux cleaned = -0.0001879 Jy ! Component: 1200 - total flux cleaned = -0.000268479 Jy ! Component: 1250 - total flux cleaned = -0.000268329 Jy ! Component: 1300 - total flux cleaned = -0.000307356 Jy ! Component: 1350 - total flux cleaned = -0.000228438 Jy ! Component: 1400 - total flux cleaned = -0.000228073 Jy ! Component: 1450 - total flux cleaned = -0.000150223 Jy ! Component: 1500 - total flux cleaned = -0.000188683 Jy ! Component: 1550 - total flux cleaned = 3.47782e-06 Jy ! Component: 1600 - total flux cleaned = 4.12977e-05 Jy ! Component: 1650 - total flux cleaned = -3.44867e-05 Jy ! Component: 1700 - total flux cleaned = 0.000116462 Jy ! Component: 1750 - total flux cleaned = 0.000116328 Jy ! Component: 1800 - total flux cleaned = 0.000190919 Jy ! Component: 1850 - total flux cleaned = 0.000153556 Jy ! Component: 1900 - total flux cleaned = 7.98763e-05 Jy ! Component: 1950 - total flux cleaned = 6.46911e-06 Jy ! Component: 2000 - total flux cleaned = 0.000261812 Jy ! Component: 2050 - total flux cleaned = 0.000152943 Jy ! Component: 2100 - total flux cleaned = 0.000369411 Jy ! Component: 2150 - total flux cleaned = 0.000225658 Jy ! Component: 2200 - total flux cleaned = 0.000297109 Jy ! Component: 2250 - total flux cleaned = 0.000546105 Jy ! Component: 2300 - total flux cleaned = 0.000581553 Jy ! Component: 2350 - total flux cleaned = 0.000581466 Jy ! Component: 2400 - total flux cleaned = 0.000721815 Jy ! Component: 2450 - total flux cleaned = 0.00082641 Jy ! Component: 2500 - total flux cleaned = 0.000965157 Jy ! Component: 2550 - total flux cleaned = 0.000999639 Jy ! Component: 2600 - total flux cleaned = 0.0010341 Jy ! Component: 2650 - total flux cleaned = 0.00123953 Jy ! Component: 2700 - total flux cleaned = 0.00117141 Jy ! Component: 2750 - total flux cleaned = 0.00134122 Jy ! Component: 2800 - total flux cleaned = 0.00134119 Jy ! Component: 2850 - total flux cleaned = 0.00144196 Jy ! Component: 2900 - total flux cleaned = 0.00150918 Jy ! Component: 2950 - total flux cleaned = 0.00154266 Jy ! Component: 3000 - total flux cleaned = 0.00160897 Jy ! Component: 3050 - total flux cleaned = 0.00157594 Jy ! Component: 3100 - total flux cleaned = 0.001708 Jy ! Component: 3150 - total flux cleaned = 0.00174066 Jy ! Component: 3200 - total flux cleaned = 0.00170799 Jy ! Component: 3250 - total flux cleaned = 0.00187064 Jy ! Component: 3300 - total flux cleaned = 0.00180572 Jy ! Component: 3350 - total flux cleaned = 0.00187011 Jy ! Component: 3400 - total flux cleaned = 0.0018701 Jy ! Component: 3450 - total flux cleaned = 0.00199831 Jy ! Component: 3500 - total flux cleaned = 0.00193445 Jy ! Component: 3550 - total flux cleaned = 0.00190275 Jy ! Component: 3600 - total flux cleaned = 0.00190275 Jy ! Component: 3650 - total flux cleaned = 0.00199749 Jy ! Component: 3700 - total flux cleaned = 0.00196614 Jy ! Component: 3750 - total flux cleaned = 0.00202876 Jy ! Component: 3800 - total flux cleaned = 0.00202897 Jy ! Component: 3850 - total flux cleaned = 0.00202897 Jy ! Component: 3900 - total flux cleaned = 0.00202886 Jy ! Component: 3950 - total flux cleaned = 0.00199806 Jy ! Component: 4000 - total flux cleaned = 0.00202893 Jy ! Component: 4050 - total flux cleaned = 0.00205964 Jy ! Total flux subtracted in 4096 components = 0.00212084 Jy ! Clean residual min=-0.001728 max=0.002070 Jy/beam ! Clean residual mean=0.000020 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 0.683375 Jy keep ! Adding 294 model components to the UV plane model. ! The established model now contains 719 components and 0.683374 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv119_uvs/J0349+4609_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.458 x 3.782 at -22.79 degrees (North through East) ! Clean map min=-0.0026235 max=0.40433 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv119_uvs/J0349+4609_S_map.fits wmodel /scr/pima/rv119_uvs/J0349+4609_S_map.mod ! Writing 719 model components to file: /scr/pima/rv119_uvs/J0349+4609_S_map.mod wobs /scr/pima/rv119_uvs/J0349+4609_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv119_uvs/J0349+4609_S_uvs.fits wwins /scr/pima/rv119_uvs/J0349+4609_S_map.win ! wwins: Wrote 15 windows to /scr/pima/rv119_uvs/J0349+4609_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.404335 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000535383 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.397232 0.397232 0.794465 1.58893 3.17786 6.35572 12.7114 25.4229 50.8457 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.404 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 755.225 quit ! Quitting program ! Log file /scr/pima/rv119_uvs/J0349+4609_S_dfm.log closed on Sun Dec 17 11:33:50 2017