! Started logfile: /scr/pima/rv119_uvs/J0328+3940_X_dfm.log on Sun Dec 17 11:32:37 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv119_uvs/J0328+3940_X_uva.fits ! Reading UV FITS file: /scr/pima/rv119_uvs/J0328+3940_X_uva.fits ! AN table 1: 44 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.976263 visibilities/baseline/integration-bin. ! Found source: J0328+3940 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 7732 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0328+3940_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.036244Jy sigma=19.423566 ! Fit after self-cal, rms=0.720097Jy sigma=13.417576 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.85 mas, bmaj=1.097 mas, bpa=-11.16 degrees ! Estimated noise=0.781738 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.210972 Jy ! Component: 100 - total flux cleaned = 0.263066 Jy ! Total flux subtracted in 100 components = 0.263066 Jy ! Clean residual min=-0.008136 max=0.021646 Jy/beam ! Clean residual mean=-0.000008 rms=0.001627 Jy/beam ! Combined flux in latest and established models = 0.263066 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.263066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064786Jy sigma=1.147781 ! Fit after self-cal, rms=0.064775Jy sigma=1.147593 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0231205 Jy ! Component: 100 - total flux cleaned = 0.0345696 Jy ! Total flux subtracted in 100 components = 0.0345696 Jy ! Clean residual min=-0.004103 max=0.005510 Jy/beam ! Clean residual mean=-0.000004 rms=0.000862 Jy/beam ! Combined flux in latest and established models = 0.297636 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 14 components and 0.297636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055761Jy sigma=0.942243 ! Fit after self-cal, rms=0.055764Jy sigma=0.942128 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00635522 Jy ! Component: 100 - total flux cleaned = 0.0099603 Jy ! Total flux subtracted in 100 components = 0.0099603 Jy ! Clean residual min=-0.003588 max=0.003472 Jy/beam ! Clean residual mean=-0.000003 rms=0.000776 Jy/beam ! Combined flux in latest and established models = 0.307596 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 15 components and 0.307596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055091Jy sigma=0.924315 ! Fit after self-cal, rms=0.055088Jy sigma=0.924255 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.106 mas, bmaj=1.4 mas, bpa=-5.895 degrees ! Estimated noise=0.44387 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00208483 Jy ! Component: 100 - total flux cleaned = 0.00295439 Jy ! Component: 150 - total flux cleaned = 0.00301937 Jy ! Component: 200 - total flux cleaned = 0.0030196 Jy ! Total flux subtracted in 200 components = 0.0030196 Jy ! Clean residual min=-0.002302 max=0.002422 Jy/beam ! Clean residual mean=-0.000004 rms=0.000541 Jy/beam ! Combined flux in latest and established models = 0.310616 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 25 components and 0.310616 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055046Jy sigma=0.922254 ! Fit after self-cal, rms=0.055043Jy sigma=0.922230 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.106 x 1.4 at -5.895 degrees (North through East) ! Clean map min=-0.0022194 max=0.28154 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.01 HN 0.99 KP 1.01 ! LA 0.98 MK 1.00 NL 0.98 OV 0.99 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.03 HN 1.01 KP 1.00 ! LA 0.98 MK 0.99 NL 0.99 OV 1.00 ! PT 1.00 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.03 HN 1.03 KP 1.01 ! LA 0.99 MK 1.00 NL 0.99 OV 1.00 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 HN 1.03 KP 1.00 ! LA 0.97 MK 1.00 NL 1.00 OV 1.00 ! PT 1.01 SC 0.98 ! ! ! Fit before self-cal, rms=0.055043Jy sigma=0.922230 ! Fit after self-cal, rms=0.054957Jy sigma=0.916802 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.106 mas, bmaj=1.401 mas, bpa=-5.852 degrees ! Estimated noise=0.443612 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000729067 Jy ! Component: 100 - total flux cleaned = -0.000803381 Jy ! Component: 150 - total flux cleaned = -0.000871672 Jy ! Component: 200 - total flux cleaned = -0.00091384 Jy ! Total flux subtracted in 200 components = -0.00091384 Jy ! Clean residual min=-0.002224 max=0.002152 Jy/beam ! Clean residual mean=-0.000000 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.309702 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 29 components and 0.309702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054933Jy sigma=0.916408 ! Fit after self-cal, rms=0.054937Jy sigma=0.916373 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054937Jy sigma=0.916373 ! Fit after self-cal, rms=0.054768Jy sigma=0.912745 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.105 mas, bmaj=1.396 mas, bpa=-5.372 degrees ! Estimated noise=0.443032 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.68147e-05 Jy ! Component: 100 - total flux cleaned = -0.000117375 Jy ! Component: 150 - total flux cleaned = -0.000180123 Jy ! Component: 200 - total flux cleaned = -0.000235437 Jy ! Total flux subtracted in 200 components = -0.000235437 Jy ! Clean residual min=-0.001950 max=0.001886 Jy/beam ! Clean residual mean=-0.000000 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.309467 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 33 components and 0.309467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054750Jy sigma=0.912449 ! Fit after self-cal, rms=0.054751Jy sigma=0.912424 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.75275e-05 Jy ! Component: 100 - total flux cleaned = -0.000130746 Jy ! Component: 150 - total flux cleaned = -0.000145804 Jy ! Component: 200 - total flux cleaned = -0.000159694 Jy ! Total flux subtracted in 200 components = -0.000159694 Jy ! Clean residual min=-0.001945 max=0.001881 Jy/beam ! Clean residual mean=-0.000001 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.309307 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 34 components and 0.309307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054741Jy sigma=0.912273 ! Fit after self-cal, rms=0.054739Jy sigma=0.912263 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054739Jy sigma=0.912263 ! Fit after self-cal, rms=0.054759Jy sigma=0.912176 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.105 mas, bmaj=1.395 mas, bpa=-5.221 degrees ! Estimated noise=0.443173 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000133772 Jy ! Component: 100 - total flux cleaned = 9.9512e-05 Jy ! Component: 150 - total flux cleaned = 6.79532e-05 Jy ! Component: 200 - total flux cleaned = 5.33594e-05 Jy ! Total flux subtracted in 200 components = 5.33594e-05 Jy ! Clean residual min=-0.001926 max=0.001880 Jy/beam ! Clean residual mean=-0.000000 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.30936 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 34 components and 0.30936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054749Jy sigma=0.912017 ! Fit after self-cal, rms=0.054748Jy sigma=0.912011 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.38464e-05 Jy ! Component: 100 - total flux cleaned = -6.69158e-05 Jy ! Component: 150 - total flux cleaned = -9.0944e-05 Jy ! Component: 200 - total flux cleaned = -0.000102389 Jy ! Total flux subtracted in 200 components = -0.000102389 Jy ! Clean residual min=-0.001924 max=0.001876 Jy/beam ! Clean residual mean=-0.000000 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.309258 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 34 components and 0.309258 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054741Jy sigma=0.911919 ! Fit after self-cal, rms=0.054741Jy sigma=0.911917 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054741Jy sigma=0.911917 ! Fit after self-cal, rms=0.054748Jy sigma=0.911849 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.235 mas, bmaj=2.491 mas, bpa=0.7417 degrees ! Estimated noise=0.534552 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.77751e-05 Jy ! Component: 100 - total flux cleaned = -4.27038e-06 Jy ! Component: 150 - total flux cleaned = -2.23744e-05 Jy ! Component: 200 - total flux cleaned = -3.27138e-05 Jy ! Total flux subtracted in 200 components = -3.27138e-05 Jy ! Clean residual min=-0.002297 max=0.002609 Jy/beam ! Clean residual mean=-0.000001 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.309225 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 35 components and 0.309225 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054749Jy sigma=0.911844 ! Fit after self-cal, rms=0.054747Jy sigma=0.911837 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9.8, -16.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00259008 Jy ! Component: 100 - total flux cleaned = 0.00395872 Jy ! Component: 150 - total flux cleaned = 0.00463378 Jy ! Component: 200 - total flux cleaned = 0.00516063 Jy ! Total flux subtracted in 200 components = 0.00516063 Jy ! Clean residual min=-0.001836 max=0.002034 Jy/beam ! Clean residual mean=-0.000004 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.314386 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 84 components and 0.314386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054673Jy sigma=0.910440 ! Fit after self-cal, rms=0.054671Jy sigma=0.910393 ! Inverting map ! Added new window around map position (4, -3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00177961 Jy ! Component: 100 - total flux cleaned = 0.0025478 Jy ! Component: 150 - total flux cleaned = 0.00292338 Jy ! Component: 200 - total flux cleaned = 0.00316704 Jy ! Total flux subtracted in 200 components = 0.00316704 Jy ! Clean residual min=-0.001645 max=0.001308 Jy/beam ! Clean residual mean=-0.000001 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.317553 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 130 components and 0.317553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054627Jy sigma=0.909599 ! Fit after self-cal, rms=0.054625Jy sigma=0.909560 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.105 mas, bmaj=1.394 mas, bpa=-5.087 degrees ! Estimated noise=0.44327 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.105 x 1.394 at -5.087 degrees (North through East) ! Clean map min=-0.0014988 max=0.28217 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8489 mas, bmaj=1.089 mas, bpa=-10.2 degrees ! Estimated noise=0.780431 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.210585 Jy ! Component: 100 - total flux cleaned = 0.26371 Jy ! Component: 150 - total flux cleaned = 0.287649 Jy ! Component: 200 - total flux cleaned = 0.299378 Jy ! Total flux subtracted in 200 components = 0.299378 Jy ! Clean residual min=-0.003765 max=0.005577 Jy/beam ! Clean residual mean=-0.000002 rms=0.000792 Jy/beam ! Combined flux in latest and established models = 0.299378 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.299378 Jy ! Inverting map and beam ! Estimated beam: bmin=1.105 mas, bmaj=1.394 mas, bpa=-5.087 degrees ! Estimated noise=0.44327 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00672924 Jy ! Component: 100 - total flux cleaned = 0.0096698 Jy ! Component: 150 - total flux cleaned = 0.0117812 Jy ! Component: 200 - total flux cleaned = 0.0134461 Jy ! Total flux subtracted in 200 components = 0.0134461 Jy ! Clean residual min=-0.001831 max=0.001626 Jy/beam ! Clean residual mean=0.000000 rms=0.000395 Jy/beam ! Combined flux in latest and established models = 0.312824 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 34 components and 0.312824 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.235 mas, bmaj=2.491 mas, bpa=0.7417 degrees ! Estimated noise=0.534552 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00178061 Jy ! Component: 100 - total flux cleaned = 0.00306925 Jy ! Component: 150 - total flux cleaned = 0.00398454 Jy ! Component: 200 - total flux cleaned = 0.00451842 Jy ! Total flux subtracted in 200 components = 0.00451842 Jy ! Clean residual min=-0.001733 max=0.001407 Jy/beam ! Clean residual mean=0.000000 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.317342 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000350198 Jy ! Component: 100 - total flux cleaned = 0.000580213 Jy ! Component: 150 - total flux cleaned = 0.00081724 Jy ! Component: 200 - total flux cleaned = 0.00101113 Jy ! Total flux subtracted in 200 components = 0.00101113 Jy ! Clean residual min=-0.001634 max=0.001377 Jy/beam ! Clean residual mean=0.000000 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.318354 Jy ! Adding 83 model components to the UV plane model. ! The established model now contains 114 components and 0.318353 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.105 mas, bmaj=1.394 mas, bpa=-5.087 degrees ! Estimated noise=0.44327 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000130215 Jy ! Component: 100 - total flux cleaned = 0.000219004 Jy ! Component: 150 - total flux cleaned = 0.000294807 Jy ! Component: 200 - total flux cleaned = 0.000330207 Jy ! Total flux subtracted in 200 components = 0.000330207 Jy ! Clean residual min=-0.001525 max=0.001589 Jy/beam ! Clean residual mean=0.000000 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.318684 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 138 components and 0.318684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054592Jy sigma=0.908620 ! Fit after self-cal, rms=0.054586Jy sigma=0.908528 wmodel J0328+3940_X_map.mod ! Writing 138 model components to file: J0328+3940_X_map.mod wobs J0328+3940_X_uvs.fits ! Writing UV FITS file: J0328+3940_X_uvs.fits wwins J0328+3940_X_map.win ! wwins: Wrote 3 windows to J0328+3940_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00012007 Jy ! Component: 100 - total flux cleaned = 6.88693e-05 Jy ! Component: 150 - total flux cleaned = -0.00010505 Jy ! Component: 200 - total flux cleaned = -0.00027455 Jy ! Component: 250 - total flux cleaned = -0.000439646 Jy ! Component: 300 - total flux cleaned = -0.000486146 Jy ! Component: 350 - total flux cleaned = -0.000600212 Jy ! Component: 400 - total flux cleaned = -0.000666976 Jy ! Component: 450 - total flux cleaned = -0.000710468 Jy ! Component: 500 - total flux cleaned = -0.000796362 Jy ! Component: 550 - total flux cleaned = -0.000881434 Jy ! Component: 600 - total flux cleaned = -0.000965699 Jy ! Component: 650 - total flux cleaned = -0.00111171 Jy ! Component: 700 - total flux cleaned = -0.00123533 Jy ! Component: 750 - total flux cleaned = -0.00131673 Jy ! Component: 800 - total flux cleaned = -0.00135738 Jy ! Component: 850 - total flux cleaned = -0.00145709 Jy ! Component: 900 - total flux cleaned = -0.00155584 Jy ! Component: 950 - total flux cleaned = -0.00163395 Jy ! Component: 1000 - total flux cleaned = -0.00173072 Jy ! Component: 1050 - total flux cleaned = -0.0017306 Jy ! Component: 1100 - total flux cleaned = -0.00182585 Jy ! Component: 1150 - total flux cleaned = -0.00180683 Jy ! Component: 1200 - total flux cleaned = -0.00195645 Jy ! Component: 1250 - total flux cleaned = -0.00201221 Jy ! Component: 1300 - total flux cleaned = -0.00208594 Jy ! Component: 1350 - total flux cleaned = -0.00215912 Jy ! Component: 1400 - total flux cleaned = -0.00223149 Jy ! Component: 1450 - total flux cleaned = -0.00226753 Jy ! Component: 1500 - total flux cleaned = -0.0023392 Jy ! Component: 1550 - total flux cleaned = -0.00249847 Jy ! Component: 1600 - total flux cleaned = -0.00251595 Jy ! Component: 1650 - total flux cleaned = -0.00256849 Jy ! Component: 1700 - total flux cleaned = -0.00263801 Jy ! Component: 1750 - total flux cleaned = -0.00269002 Jy ! Component: 1800 - total flux cleaned = -0.00279297 Jy ! Component: 1850 - total flux cleaned = -0.00286133 Jy ! Component: 1900 - total flux cleaned = -0.00298008 Jy ! Component: 1950 - total flux cleaned = -0.00303053 Jy ! Component: 2000 - total flux cleaned = -0.00306397 Jy ! Component: 2050 - total flux cleaned = -0.00319722 Jy ! Component: 2100 - total flux cleaned = -0.00328004 Jy ! Component: 2150 - total flux cleaned = -0.00326372 Jy ! Component: 2200 - total flux cleaned = -0.00341122 Jy ! Component: 2250 - total flux cleaned = -0.00349259 Jy ! Component: 2300 - total flux cleaned = -0.00354113 Jy ! Component: 2350 - total flux cleaned = -0.00362163 Jy ! Component: 2400 - total flux cleaned = -0.00363752 Jy ! Component: 2450 - total flux cleaned = -0.00370122 Jy ! Component: 2500 - total flux cleaned = -0.00374878 Jy ! Component: 2550 - total flux cleaned = -0.00379623 Jy ! Component: 2600 - total flux cleaned = -0.00384332 Jy ! Component: 2650 - total flux cleaned = -0.00389018 Jy ! Component: 2700 - total flux cleaned = -0.00392135 Jy ! Component: 2750 - total flux cleaned = -0.00401416 Jy ! Component: 2800 - total flux cleaned = -0.00401423 Jy ! Component: 2850 - total flux cleaned = -0.00406023 Jy ! Component: 2900 - total flux cleaned = -0.00415173 Jy ! Component: 2950 - total flux cleaned = -0.00419723 Jy ! Component: 3000 - total flux cleaned = -0.00421239 Jy ! Component: 3050 - total flux cleaned = -0.00425755 Jy ! Component: 3100 - total flux cleaned = -0.00428745 Jy ! Component: 3150 - total flux cleaned = -0.00428759 Jy ! Component: 3200 - total flux cleaned = -0.00431731 Jy ! Component: 3250 - total flux cleaned = -0.00434679 Jy ! Component: 3300 - total flux cleaned = -0.00440552 Jy ! Component: 3350 - total flux cleaned = -0.00440556 Jy ! Component: 3400 - total flux cleaned = -0.00442014 Jy ! Component: 3450 - total flux cleaned = -0.00446375 Jy ! Component: 3500 - total flux cleaned = -0.00450724 Jy ! Component: 3550 - total flux cleaned = -0.00463673 Jy ! Component: 3600 - total flux cleaned = -0.00460799 Jy ! Component: 3650 - total flux cleaned = -0.00463643 Jy ! Component: 3700 - total flux cleaned = -0.00462222 Jy ! Component: 3750 - total flux cleaned = -0.00465053 Jy ! Component: 3800 - total flux cleaned = -0.00470687 Jy ! Component: 3850 - total flux cleaned = -0.00466464 Jy ! Component: 3900 - total flux cleaned = -0.0046226 Jy ! Component: 3950 - total flux cleaned = -0.00470621 Jy ! Component: 4000 - total flux cleaned = -0.00472013 Jy ! Component: 4050 - total flux cleaned = -0.00477537 Jy ! Total flux subtracted in 4096 components = -0.00487177 Jy ! Clean residual min=-0.000738 max=0.000793 Jy/beam ! Clean residual mean=0.000000 rms=0.000229 Jy/beam ! Combined flux in latest and established models = 0.313812 Jy keep ! Adding 302 model components to the UV plane model. ! The established model now contains 440 components and 0.313812 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv119_uvs/J0328+3940_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.105 x 1.394 at -5.087 degrees (North through East) ! Clean map min=-0.0011428 max=0.28127 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv119_uvs/J0328+3940_X_map.fits wmodel /scr/pima/rv119_uvs/J0328+3940_X_map.mod ! Writing 440 model components to file: /scr/pima/rv119_uvs/J0328+3940_X_map.mod wobs /scr/pima/rv119_uvs/J0328+3940_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv119_uvs/J0328+3940_X_uvs.fits wwins /scr/pima/rv119_uvs/J0328+3940_X_map.win ! wwins: Wrote 4 windows to /scr/pima/rv119_uvs/J0328+3940_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.281267 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000228402 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.243613 0.243613 0.487227 0.974454 1.94891 3.89782 7.79563 15.5913 31.1825 62.365 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.281 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1231.46 quit ! Quitting program ! Log file /scr/pima/rv119_uvs/J0328+3940_X_dfm.log closed on Sun Dec 17 11:32:42 2017