! Started logfile: /scr/pima/rv119_uvs/J0229-3643_X_dfm.log on Sun Dec 17 11:32:27 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv119_uvs/J0229-3643_X_uva.fits ! Reading UV FITS file: /scr/pima/rv119_uvs/J0229-3643_X_uva.fits ! AN table 1: 10 integrations on 15 of 15 possible baselines. ! AN table 2: 4 integrations on 15 of 15 possible baselines. ! AN table 3: 27 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.661519 visibilities/baseline/integration-bin. ! Found source: J0229-3643 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 2056 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0229-3643_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! A total of 62 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! A total of 62 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! A total of 62 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! A total of 62 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.028775Jy sigma=13.851951 ! Fit after self-cal, rms=0.743330Jy sigma=9.875120 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8169 mas, bmaj=3.486 mas, bpa=-5.11 degrees ! Estimated noise=1.72135 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.211471 Jy ! Component: 100 - total flux cleaned = 0.257713 Jy ! Total flux subtracted in 100 components = 0.257713 Jy ! Clean residual min=-0.012379 max=0.024092 Jy/beam ! Clean residual mean=0.000004 rms=0.002795 Jy/beam ! Combined flux in latest and established models = 0.257713 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.257713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100173Jy sigma=1.098010 ! Fit after self-cal, rms=0.100152Jy sigma=1.097944 ! Inverting map ! Added new window around map position (1.8, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0208647 Jy ! Component: 100 - total flux cleaned = 0.0241253 Jy ! Total flux subtracted in 100 components = 0.0241253 Jy ! Clean residual min=-0.011465 max=0.019279 Jy/beam ! Clean residual mean=0.000005 rms=0.002379 Jy/beam ! Combined flux in latest and established models = 0.281838 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 11 components and 0.281838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095907Jy sigma=1.042599 ! Fit after self-cal, rms=0.095471Jy sigma=1.032817 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.044 mas, bmaj=4.262 mas, bpa=-5.024 degrees ! Estimated noise=1.28695 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.8, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00907557 Jy ! Component: 100 - total flux cleaned = 0.00940696 Jy ! Component: 150 - total flux cleaned = 0.00966281 Jy ! Component: 200 - total flux cleaned = 0.00988521 Jy ! Total flux subtracted in 200 components = 0.00988521 Jy ! Clean residual min=-0.008031 max=0.007706 Jy/beam ! Clean residual mean=0.000008 rms=0.001654 Jy/beam ! Combined flux in latest and established models = 0.291724 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 28 components and 0.291724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092881Jy sigma=1.006084 ! Fit after self-cal, rms=0.092904Jy sigma=1.005691 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.044 x 4.262 at -5.024 degrees (North through East) ! Clean map min=-0.0089504 max=0.25522 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.07 HN 1.43 KP 1.02 LA 0.94 ! NL 1.42 SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.08 KP 0.97 LA 0.91 NL 0.89 ! PT 1.01 SC 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.03 KP 1.01 LA 0.99 MK 0.97 ! NL 1.35 OV 0.93 PT 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 HN 1.57 KP 1.00 LA 1.00 ! NL 1.44 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00 KP 0.90 LA 1.04 NL 0.97 ! PT 0.95 SC 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.02 KP 1.02 LA 1.01 MK 0.96 ! NL 1.25 OV 0.94 PT 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 HN 1.52 KP 1.01 LA 1.03 ! NL 1.27 SC 0.86 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.06 KP 0.98 LA 1.02 NL 0.93 ! PT 0.98 SC 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.02 KP 1.00 LA 0.95 MK 1.03 ! NL 1.23 OV 0.94 PT 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 HN 1.25 KP 1.04 LA 0.98 ! NL 1.23 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.12 KP 1.07 LA 0.92 NL 1.06 ! PT 0.98 SC 0.83 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.92 KP 1.00 LA 1.00 MK 0.98 ! NL 1.20 OV 0.97 PT 1.02 ! ! ! Fit before self-cal, rms=0.092904Jy sigma=1.005691 ! Fit after self-cal, rms=0.101215Jy sigma=0.949014 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.04 mas, bmaj=4.278 mas, bpa=-4.486 degrees ! Estimated noise=1.30202 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000389326 Jy ! Component: 100 - total flux cleaned = -5.79886e-05 Jy ! Component: 150 - total flux cleaned = -0.000276336 Jy ! Component: 200 - total flux cleaned = -0.00027922 Jy ! Total flux subtracted in 200 components = -0.00027922 Jy ! Clean residual min=-0.005249 max=0.005376 Jy/beam ! Clean residual mean=0.000019 rms=0.001259 Jy/beam ! Combined flux in latest and established models = 0.291444 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 52 components and 0.291444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101056Jy sigma=0.946299 ! Fit after self-cal, rms=0.101572Jy sigma=0.945790 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101572Jy sigma=0.945790 ! Fit after self-cal, rms=0.101840Jy sigma=0.939141 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.04 mas, bmaj=4.279 mas, bpa=-4.528 degrees ! Estimated noise=1.30008 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.88177e-06 Jy ! Component: 100 - total flux cleaned = 6.63389e-06 Jy ! Component: 150 - total flux cleaned = 6.90531e-05 Jy ! Component: 200 - total flux cleaned = 0.00012232 Jy ! Total flux subtracted in 200 components = 0.00012232 Jy ! Clean residual min=-0.004773 max=0.004867 Jy/beam ! Clean residual mean=0.000023 rms=0.001191 Jy/beam ! Combined flux in latest and established models = 0.291567 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 59 components and 0.291567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101744Jy sigma=0.937989 ! Fit after self-cal, rms=0.101760Jy sigma=0.937901 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000179338 Jy ! Component: 100 - total flux cleaned = 0.000181497 Jy ! Component: 150 - total flux cleaned = 0.0002805 Jy ! Component: 200 - total flux cleaned = 0.000278706 Jy ! Total flux subtracted in 200 components = 0.000278706 Jy ! Clean residual min=-0.004703 max=0.004932 Jy/beam ! Clean residual mean=0.000024 rms=0.001183 Jy/beam ! Combined flux in latest and established models = 0.291845 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 63 components and 0.291845 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101692Jy sigma=0.937223 ! Fit after self-cal, rms=0.101689Jy sigma=0.937184 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101689Jy sigma=0.937184 ! Fit after self-cal, rms=0.102138Jy sigma=0.916511 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.039 mas, bmaj=4.276 mas, bpa=-4.589 degrees ! Estimated noise=1.29971 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000308238 Jy ! Component: 100 - total flux cleaned = -0.000308904 Jy ! Component: 150 - total flux cleaned = -0.000359779 Jy ! Component: 200 - total flux cleaned = -0.000407471 Jy ! Total flux subtracted in 200 components = -0.000407471 Jy ! Clean residual min=-0.005046 max=0.004309 Jy/beam ! Clean residual mean=-0.000043 rms=0.001085 Jy/beam ! Combined flux in latest and established models = 0.291438 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 71 components and 0.291438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102059Jy sigma=0.915551 ! Fit after self-cal, rms=0.102087Jy sigma=0.915386 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.48993e-05 Jy ! Component: 100 - total flux cleaned = 3.04428e-05 Jy ! Component: 150 - total flux cleaned = 2.89777e-05 Jy ! Component: 200 - total flux cleaned = -1.27923e-05 Jy ! Total flux subtracted in 200 components = -1.27923e-05 Jy ! Clean residual min=-0.004978 max=0.004260 Jy/beam ! Clean residual mean=-0.000043 rms=0.001078 Jy/beam ! Combined flux in latest and established models = 0.291425 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 73 components and 0.291425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102031Jy sigma=0.914926 ! Fit after self-cal, rms=0.102036Jy sigma=0.914902 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102036Jy sigma=0.914902 ! Fit after self-cal, rms=0.102031Jy sigma=0.914671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.636 mas, bmaj=7.321 mas, bpa=2.166 degrees ! Estimated noise=1.52815 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000882863 Jy ! Component: 100 - total flux cleaned = -0.00087725 Jy ! Component: 150 - total flux cleaned = -0.000948644 Jy ! Component: 200 - total flux cleaned = -0.000990875 Jy ! Total flux subtracted in 200 components = -0.000990875 Jy ! Clean residual min=-0.004917 max=0.004112 Jy/beam ! Clean residual mean=-0.000068 rms=0.001246 Jy/beam ! Combined flux in latest and established models = 0.290434 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 78 components and 0.290434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101988Jy sigma=0.914558 ! Fit after self-cal, rms=0.101992Jy sigma=0.914476 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.85863e-05 Jy ! Component: 100 - total flux cleaned = 1.79882e-05 Jy ! Component: 150 - total flux cleaned = -1.84311e-06 Jy ! Component: 200 - total flux cleaned = -2.13186e-05 Jy ! Total flux subtracted in 200 components = -2.13186e-05 Jy ! Clean residual min=-0.004921 max=0.004095 Jy/beam ! Clean residual mean=-0.000068 rms=0.001244 Jy/beam ! Combined flux in latest and established models = 0.290413 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 82 components and 0.290413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101964Jy sigma=0.914439 ! Fit after self-cal, rms=0.101970Jy sigma=0.914409 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.04 mas, bmaj=4.274 mas, bpa=-4.613 degrees ! Estimated noise=1.29826 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.04 x 4.274 at -4.613 degrees (North through East) ! Clean map min=-0.004983 max=0.25783 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8109 mas, bmaj=3.469 mas, bpa=-4.816 degrees ! Estimated noise=1.73506 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.212861 Jy ! Component: 100 - total flux cleaned = 0.261003 Jy ! Component: 150 - total flux cleaned = 0.277668 Jy ! Component: 200 - total flux cleaned = 0.285594 Jy ! Total flux subtracted in 200 components = 0.285594 Jy ! Clean residual min=-0.007211 max=0.008317 Jy/beam ! Clean residual mean=-0.000008 rms=0.001667 Jy/beam ! Combined flux in latest and established models = 0.285594 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.285594 Jy ! Inverting map and beam ! Estimated beam: bmin=1.04 mas, bmaj=4.274 mas, bpa=-4.613 degrees ! Estimated noise=1.29826 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00461249 Jy ! Component: 100 - total flux cleaned = 0.00505582 Jy ! Component: 150 - total flux cleaned = 0.00518822 Jy ! Component: 200 - total flux cleaned = 0.00531068 Jy ! Total flux subtracted in 200 components = 0.00531068 Jy ! Clean residual min=-0.005397 max=0.004569 Jy/beam ! Clean residual mean=-0.000042 rms=0.001141 Jy/beam ! Combined flux in latest and established models = 0.290905 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 41 components and 0.290905 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.636 mas, bmaj=7.321 mas, bpa=2.166 degrees ! Estimated noise=1.52815 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000459565 Jy ! Component: 100 - total flux cleaned = -0.000576094 Jy ! Component: 150 - total flux cleaned = -0.000624923 Jy ! Component: 200 - total flux cleaned = -0.000700604 Jy ! Total flux subtracted in 200 components = -0.000700604 Jy ! Clean residual min=-0.005088 max=0.004335 Jy/beam ! Clean residual mean=-0.000070 rms=0.001254 Jy/beam ! Combined flux in latest and established models = 0.290204 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.81288e-05 Jy ! Component: 100 - total flux cleaned = -2.65621e-05 Jy ! Component: 150 - total flux cleaned = -5.65144e-05 Jy ! Component: 200 - total flux cleaned = -5.74411e-05 Jy ! Total flux subtracted in 200 components = -5.74411e-05 Jy ! Clean residual min=-0.005028 max=0.004325 Jy/beam ! Clean residual mean=-0.000070 rms=0.001251 Jy/beam ! Combined flux in latest and established models = 0.290147 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 52 components and 0.290147 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.04 mas, bmaj=4.274 mas, bpa=-4.613 degrees ! Estimated noise=1.29826 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.12688e-06 Jy ! Component: 100 - total flux cleaned = 8.26343e-05 Jy ! Component: 150 - total flux cleaned = 0.000163547 Jy ! Component: 200 - total flux cleaned = 0.000312131 Jy ! Total flux subtracted in 200 components = 0.000312131 Jy ! Clean residual min=-0.005115 max=0.004397 Jy/beam ! Clean residual mean=-0.000042 rms=0.001100 Jy/beam ! Combined flux in latest and established models = 0.290459 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 59 components and 0.290459 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102209Jy sigma=0.917267 ! Fit after self-cal, rms=0.102148Jy sigma=0.916849 wmodel J0229-3643_X_map.mod ! Writing 59 model components to file: J0229-3643_X_map.mod wobs J0229-3643_X_uvs.fits ! Writing UV FITS file: J0229-3643_X_uvs.fits wwins J0229-3643_X_map.win ! wwins: Wrote 3 windows to J0229-3643_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0012268 Jy ! Component: 100 - total flux cleaned = -0.00114238 Jy ! Component: 150 - total flux cleaned = -0.00151819 Jy ! Component: 200 - total flux cleaned = -0.00187807 Jy ! Component: 250 - total flux cleaned = -0.00222588 Jy ! Component: 300 - total flux cleaned = -0.00236034 Jy ! Component: 350 - total flux cleaned = -0.00235835 Jy ! Component: 400 - total flux cleaned = -0.00248787 Jy ! Component: 450 - total flux cleaned = -0.00280256 Jy ! Component: 500 - total flux cleaned = -0.00304752 Jy ! Component: 550 - total flux cleaned = -0.00322793 Jy ! Component: 600 - total flux cleaned = -0.00340385 Jy ! Component: 650 - total flux cleaned = -0.00380864 Jy ! Component: 700 - total flux cleaned = -0.00397892 Jy ! Component: 750 - total flux cleaned = -0.0042028 Jy ! Component: 800 - total flux cleaned = -0.0042577 Jy ! Component: 850 - total flux cleaned = -0.00447499 Jy ! Component: 900 - total flux cleaned = -0.00463535 Jy ! Component: 950 - total flux cleaned = -0.00474093 Jy ! Component: 1000 - total flux cleaned = -0.00494873 Jy ! Component: 1050 - total flux cleaned = -0.0047938 Jy ! Component: 1100 - total flux cleaned = -0.00499679 Jy ! Component: 1150 - total flux cleaned = -0.00509704 Jy ! Component: 1200 - total flux cleaned = -0.00524615 Jy ! Component: 1250 - total flux cleaned = -0.00529528 Jy ! Component: 1300 - total flux cleaned = -0.0055857 Jy ! Component: 1350 - total flux cleaned = -0.0056332 Jy ! Component: 1400 - total flux cleaned = -0.00577607 Jy ! Component: 1450 - total flux cleaned = -0.00591624 Jy ! Component: 1500 - total flux cleaned = -0.00600907 Jy ! Component: 1550 - total flux cleaned = -0.0061929 Jy ! Component: 1600 - total flux cleaned = -0.00637444 Jy ! Component: 1650 - total flux cleaned = -0.00623902 Jy ! Component: 1700 - total flux cleaned = -0.00632818 Jy ! Component: 1750 - total flux cleaned = -0.00632887 Jy ! Component: 1800 - total flux cleaned = -0.00628503 Jy ! Component: 1850 - total flux cleaned = -0.00619835 Jy ! Component: 1900 - total flux cleaned = -0.00637114 Jy ! Component: 1950 - total flux cleaned = -0.00624296 Jy ! Component: 2000 - total flux cleaned = -0.00628527 Jy ! Component: 2050 - total flux cleaned = -0.00641157 Jy ! Component: 2100 - total flux cleaned = -0.00632803 Jy ! Component: 2150 - total flux cleaned = -0.00616212 Jy ! Component: 2200 - total flux cleaned = -0.00620391 Jy ! Component: 2250 - total flux cleaned = -0.00640838 Jy ! Component: 2300 - total flux cleaned = -0.00620498 Jy ! Component: 2350 - total flux cleaned = -0.00624583 Jy ! Component: 2400 - total flux cleaned = -0.00632597 Jy ! Component: 2450 - total flux cleaned = -0.00616679 Jy ! Component: 2500 - total flux cleaned = -0.00620612 Jy ! Component: 2550 - total flux cleaned = -0.00624531 Jy ! Component: 2600 - total flux cleaned = -0.00628438 Jy ! Component: 2650 - total flux cleaned = -0.00628425 Jy ! Component: 2700 - total flux cleaned = -0.00628416 Jy ! Component: 2750 - total flux cleaned = -0.00636063 Jy ! Component: 2800 - total flux cleaned = -0.00624598 Jy ! Component: 2850 - total flux cleaned = -0.00617043 Jy ! Component: 2900 - total flux cleaned = -0.00617053 Jy ! Component: 2950 - total flux cleaned = -0.00620804 Jy ! Component: 3000 - total flux cleaned = -0.00620797 Jy ! Component: 3050 - total flux cleaned = -0.00639222 Jy ! Component: 3100 - total flux cleaned = -0.0064287 Jy ! Component: 3150 - total flux cleaned = -0.00646505 Jy ! Component: 3200 - total flux cleaned = -0.00661 Jy ! Component: 3250 - total flux cleaned = -0.00657398 Jy ! Component: 3300 - total flux cleaned = -0.0066097 Jy ! Component: 3350 - total flux cleaned = -0.00657388 Jy ! Component: 3400 - total flux cleaned = -0.00657398 Jy ! Component: 3450 - total flux cleaned = -0.00660937 Jy ! Component: 3500 - total flux cleaned = -0.00664451 Jy ! Component: 3550 - total flux cleaned = -0.00664458 Jy ! Component: 3600 - total flux cleaned = -0.00664467 Jy ! Component: 3650 - total flux cleaned = -0.00664463 Jy ! Component: 3700 - total flux cleaned = -0.00650696 Jy ! Component: 3750 - total flux cleaned = -0.00643845 Jy ! Component: 3800 - total flux cleaned = -0.00647264 Jy ! Component: 3850 - total flux cleaned = -0.00647293 Jy ! Component: 3900 - total flux cleaned = -0.0065405 Jy ! Component: 3950 - total flux cleaned = -0.00660739 Jy ! Component: 4000 - total flux cleaned = -0.00657412 Jy ! Component: 4050 - total flux cleaned = -0.00660712 Jy ! Total flux subtracted in 4096 components = -0.00660731 Jy ! Clean residual min=-0.001758 max=0.002163 Jy/beam ! Clean residual mean=-0.000017 rms=0.000611 Jy/beam ! Combined flux in latest and established models = 0.283852 Jy keep ! Adding 284 model components to the UV plane model. ! The established model now contains 343 components and 0.283852 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv119_uvs/J0229-3643_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.04 x 4.274 at -4.613 degrees (North through East) ! Clean map min=-0.0040424 max=0.25991 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv119_uvs/J0229-3643_X_map.fits wmodel /scr/pima/rv119_uvs/J0229-3643_X_map.mod ! Writing 343 model components to file: /scr/pima/rv119_uvs/J0229-3643_X_map.mod wobs /scr/pima/rv119_uvs/J0229-3643_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv119_uvs/J0229-3643_X_uvs.fits wwins /scr/pima/rv119_uvs/J0229-3643_X_map.win ! wwins: Wrote 4 windows to /scr/pima/rv119_uvs/J0229-3643_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.259905 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000606803 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.700412 0.700412 1.40082 2.80165 5.6033 11.2066 22.4132 44.8264 89.6528 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.259 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 428.319 quit ! Quitting program ! Log file /scr/pima/rv119_uvs/J0229-3643_X_dfm.log closed on Sun Dec 17 11:32:31 2017