! Started logfile: /scr/pima/rv119_uvs/J0217+7349_X_dfm.log on Sun Dec 17 11:32:22 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv119_uvs/J0217+7349_X_uva.fits ! Reading UV FITS file: /scr/pima/rv119_uvs/J0217+7349_X_uva.fits ! AN table 1: 2 integrations on 45 of 45 possible baselines. ! AN table 2: 8 integrations on 55 of 55 possible baselines. ! AN table 3: 6 integrations on 3 of 3 possible baselines. ! AN table 4: 4 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.690789 visibilities/baseline/integration-bin. ! Found source: J0217+7349 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 1680 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0217+7349_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=2.153021Jy sigma=25.243776 ! Fit after self-cal, rms=1.077089Jy sigma=12.208599 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.493% of the data. ! The x-axis pixel size should ideally be below 0.1841 milli-arcsec ! Estimated beam: bmin=0.6946 mas, bmaj=0.8386 mas, bpa=35.89 degrees ! Estimated noise=1.73346 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.16694 Jy ! Component: 100 - total flux cleaned = 1.60375 Jy ! Total flux subtracted in 100 components = 1.60375 Jy ! Clean residual min=-0.077030 max=0.330552 Jy/beam ! Clean residual mean=-0.000176 rms=0.018666 Jy/beam ! Combined flux in latest and established models = 1.60375 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 1.60375 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.690143Jy sigma=7.850755 ! Fit after self-cal, rms=0.688129Jy sigma=7.825956 ! Inverting map ! Your choice of large map pixels excluded 0.493% of the data. ! The x-axis pixel size should ideally be below 0.1841 milli-arcsec ! Added new window around map position (1, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.311307 Jy ! Component: 100 - total flux cleaned = 0.48996 Jy ! Total flux subtracted in 100 components = 0.48996 Jy ! Clean residual min=-0.058371 max=0.140863 Jy/beam ! Clean residual mean=-0.000112 rms=0.012055 Jy/beam ! Combined flux in latest and established models = 2.09371 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 24 components and 2.09371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.422815Jy sigma=4.885395 ! Fit after self-cal, rms=0.409489Jy sigma=4.681237 ! Inverting map ! Your choice of large map pixels excluded 0.493% of the data. ! The x-axis pixel size should ideally be below 0.1841 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.146887 Jy ! Component: 100 - total flux cleaned = 0.23912 Jy ! Total flux subtracted in 100 components = 0.23912 Jy ! Clean residual min=-0.045183 max=0.084626 Jy/beam ! Clean residual mean=-0.000080 rms=0.009082 Jy/beam ! Combined flux in latest and established models = 2.33283 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 29 components and 2.33283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.312090Jy sigma=3.631359 ! Fit after self-cal, rms=0.307130Jy sigma=3.541530 ! Inverting map ! Your choice of large map pixels excluded 0.493% of the data. ! The x-axis pixel size should ideally be below 0.1841 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0806967 Jy ! Component: 100 - total flux cleaned = 0.130479 Jy ! Total flux subtracted in 100 components = 0.130479 Jy ! Clean residual min=-0.040534 max=0.058705 Jy/beam ! Clean residual mean=-0.000062 rms=0.007948 Jy/beam ! Combined flux in latest and established models = 2.46331 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 31 components and 2.46331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.270699Jy sigma=3.158903 ! Fit after self-cal, rms=0.269268Jy sigma=3.126606 ! Inverting map ! Your choice of large map pixels excluded 0.493% of the data. ! The x-axis pixel size should ideally be below 0.1841 milli-arcsec ! Added new window around map position (2, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0544019 Jy ! Component: 100 - total flux cleaned = 0.0836186 Jy ! Total flux subtracted in 100 components = 0.0836186 Jy ! Clean residual min=-0.039536 max=0.045576 Jy/beam ! Clean residual mean=-0.000053 rms=0.007398 Jy/beam ! Combined flux in latest and established models = 2.54693 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 40 components and 2.54693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.253494Jy sigma=2.963626 ! Fit after self-cal, rms=0.252443Jy sigma=2.944400 ! Inverting map ! Your choice of large map pixels excluded 0.493% of the data. ! The x-axis pixel size should ideally be below 0.1841 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.493% of the data. ! The x-axis pixel size should ideally be below 0.1841 milli-arcsec ! Estimated beam: bmin=0.8226 mas, bmaj=0.9814 mas, bpa=36.2 degrees ! Estimated noise=1.53876 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.4, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0448461 Jy ! Component: 100 - total flux cleaned = 0.0727821 Jy ! Component: 150 - total flux cleaned = 0.0801782 Jy ! Component: 200 - total flux cleaned = 0.0836709 Jy ! Total flux subtracted in 200 components = 0.0836709 Jy ! Clean residual min=-0.027842 max=0.033936 Jy/beam ! Clean residual mean=-0.000132 rms=0.006323 Jy/beam ! Combined flux in latest and established models = 2.6306 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 52 components and 2.6306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.242677Jy sigma=2.831685 ! Fit after self-cal, rms=0.241883Jy sigma=2.817912 ! Inverting map ! Your choice of large map pixels excluded 0.493% of the data. ! The x-axis pixel size should ideally be below 0.1841 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8226 x 0.9814 at 36.2 degrees (North through East) ! Clean map min=-0.024331 max=1.3226 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.98 HN 1.02 KP 0.97 ! LA 1.10 MK 1.15 NL 1.05 ON 0.93 ! OV 1.04 PT 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.99 KP 0.99 LA 1.00 ! MK 1.22 NL 0.98 ON 0.95 OV 1.01 ! PT 1.00 SC 0.97 WZ 1.02 ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 HN 0.94 NL 0.97 NY 1.03 ! ON 0.96 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 0.99 KP 0.98 ! LA 1.10 MK 1.12 NL 1.04 ON 0.94 ! OV 1.01 PT 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.01 KP 1.00 LA 1.00 ! MK 1.16 NL 0.97 ON 0.97 OV 0.99 ! PT 0.99 SC 0.97 WZ 1.00 ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.05 HN 0.92 NL 0.94 NY 1.02 ! ON 0.95 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.96 HN 0.97 KP 0.99 ! LA 1.09 MK 1.00 NL 1.05 ON 0.94 ! OV 1.03 PT 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.99 KP 1.01 LA 1.00 ! MK 1.21 NL 0.98 ON 0.93 OV 0.99 ! PT 0.98 SC 0.98 WZ 1.00 ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.05 HN 0.95 NL 0.93 NY 0.99 ! ON 0.95 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.95 HN 0.96 KP 0.98 ! LA 1.09 MK 0.95 NL 1.05 ON 0.95 ! OV 1.03 PT 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.98 KP 1.01 LA 0.99 ! MK 1.15 NL 0.98 ON 0.96 OV 0.99 ! PT 1.00 SC 0.94 WZ 1.05 ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.01 HN 0.98 NL 0.94 NY 0.90 ! ON 0.97 SC 0.96 ! ! ! Fit before self-cal, rms=0.241883Jy sigma=2.817912 ! Fit after self-cal, rms=0.240871Jy sigma=2.567707 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.508% of the data. ! The x-axis pixel size should ideally be below 0.1841 milli-arcsec ! Estimated beam: bmin=0.8147 mas, bmaj=0.9825 mas, bpa=35.03 degrees ! Estimated noise=1.56993 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.2, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00950571 Jy ! Component: 100 - total flux cleaned = 0.00731974 Jy ! Component: 150 - total flux cleaned = 0.0082279 Jy ! Component: 200 - total flux cleaned = 0.00908853 Jy ! Total flux subtracted in 200 components = 0.00908853 Jy ! Clean residual min=-0.023548 max=0.029078 Jy/beam ! Clean residual mean=-0.000078 rms=0.004998 Jy/beam ! Combined flux in latest and established models = 2.63969 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 70 components and 2.63969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.233455Jy sigma=2.459759 ! Fit after self-cal, rms=0.232847Jy sigma=2.455106 ! Inverting map ! Your choice of large map pixels excluded 0.508% of the data. ! The x-axis pixel size should ideally be below 0.1841 milli-arcsec ! Added new window around map position (4.6, -1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0216529 Jy ! Component: 100 - total flux cleaned = 0.0290987 Jy ! Component: 150 - total flux cleaned = 0.0327473 Jy ! Component: 200 - total flux cleaned = 0.0340828 Jy ! Total flux subtracted in 200 components = 0.0340828 Jy ! Clean residual min=-0.023404 max=0.023677 Jy/beam ! Clean residual mean=-0.000074 rms=0.004710 Jy/beam ! Combined flux in latest and established models = 2.67377 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 78 components and 2.67377 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227230Jy sigma=2.383923 ! Fit after self-cal, rms=0.226684Jy sigma=2.378881 ! Inverting map ! Your choice of large map pixels excluded 0.508% of the data. ! The x-axis pixel size should ideally be below 0.1841 milli-arcsec ! Added new window around map position (15, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0152258 Jy ! Component: 100 - total flux cleaned = 0.0209599 Jy ! Component: 150 - total flux cleaned = 0.0241652 Jy ! Component: 200 - total flux cleaned = 0.026521 Jy ! Total flux subtracted in 200 components = 0.026521 Jy ! Clean residual min=-0.022472 max=0.021676 Jy/beam ! Clean residual mean=-0.000059 rms=0.004467 Jy/beam ! Combined flux in latest and established models = 2.70029 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 91 components and 2.70029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222289Jy sigma=2.328805 ! Fit after self-cal, rms=0.221973Jy sigma=2.325327 ! Inverting map ! Your choice of large map pixels excluded 0.508% of the data. ! The x-axis pixel size should ideally be below 0.1841 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221973Jy sigma=2.325327 ! Fit after self-cal, rms=0.229786Jy sigma=2.020844 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.508% of the data. ! The x-axis pixel size should ideally be below 0.1841 milli-arcsec ! Estimated beam: bmin=0.8154 mas, bmaj=0.9858 mas, bpa=33.03 degrees ! Estimated noise=1.56453 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0182939 Jy ! Component: 100 - total flux cleaned = 0.0247202 Jy ! Component: 150 - total flux cleaned = 0.0288064 Jy ! Component: 200 - total flux cleaned = 0.0315856 Jy ! Total flux subtracted in 200 components = 0.0315856 Jy ! Clean residual min=-0.015161 max=0.014207 Jy/beam ! Clean residual mean=-0.000020 rms=0.002880 Jy/beam ! Combined flux in latest and established models = 2.73188 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 117 components and 2.73188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227024Jy sigma=1.981060 ! Fit after self-cal, rms=0.226866Jy sigma=1.978066 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.508% of the data. ! The x-axis pixel size should ideally be below 0.1841 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.8, -1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000141694 Jy ! Component: 100 - total flux cleaned = -0.00068187 Jy ! Component: 150 - total flux cleaned = 0.00154752 Jy ! Component: 200 - total flux cleaned = 0.00317753 Jy ! Total flux subtracted in 200 components = 0.00317753 Jy ! Clean residual min=-0.013916 max=0.012801 Jy/beam ! Clean residual mean=-0.000019 rms=0.002732 Jy/beam ! Combined flux in latest and established models = 2.73505 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 133 components and 2.73505 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224689Jy sigma=1.949072 ! Fit after self-cal, rms=0.224540Jy sigma=1.946423 ! Inverting map ! Your choice of large map pixels excluded 0.508% of the data. ! The x-axis pixel size should ideally be below 0.1841 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224540Jy sigma=1.946423 ! Fit after self-cal, rms=0.226664Jy sigma=1.942789 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.508% of the data. ! The x-axis pixel size should ideally be below 0.1841 milli-arcsec ! Estimated beam: bmin=0.8145 mas, bmaj=0.9865 mas, bpa=32.83 degrees ! Estimated noise=1.56299 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0063321 Jy ! Component: 100 - total flux cleaned = 0.00930942 Jy ! Component: 150 - total flux cleaned = 0.0104601 Jy ! Component: 200 - total flux cleaned = 0.0115461 Jy ! Total flux subtracted in 200 components = 0.0115461 Jy ! Clean residual min=-0.012478 max=0.012248 Jy/beam ! Clean residual mean=-0.000020 rms=0.002597 Jy/beam ! Combined flux in latest and established models = 2.7466 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 138 components and 2.7466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.225078Jy sigma=1.920510 ! Fit after self-cal, rms=0.224987Jy sigma=1.918460 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.508% of the data. ! The x-axis pixel size should ideally be below 0.1841 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00061421 Jy ! Component: 100 - total flux cleaned = 0.00153146 Jy ! Component: 150 - total flux cleaned = 0.00252722 Jy ! Component: 200 - total flux cleaned = 0.00348266 Jy ! Total flux subtracted in 200 components = 0.00348266 Jy ! Clean residual min=-0.011940 max=0.011937 Jy/beam ! Clean residual mean=-0.000019 rms=0.002513 Jy/beam ! Combined flux in latest and established models = 2.75008 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 146 components and 2.75008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223796Jy sigma=1.902505 ! Fit after self-cal, rms=0.223722Jy sigma=1.900511 ! Inverting map ! Your choice of large map pixels excluded 0.508% of the data. ! The x-axis pixel size should ideally be below 0.1841 milli-arcsec ! Added new window around map position (4.2, -41.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00572936 Jy ! Component: 100 - total flux cleaned = 0.00640949 Jy ! Component: 150 - total flux cleaned = 0.00860733 Jy ! Component: 200 - total flux cleaned = 0.00948361 Jy ! Total flux subtracted in 200 components = 0.00948361 Jy ! Clean residual min=-0.011578 max=0.010899 Jy/beam ! Clean residual mean=-0.000018 rms=0.002411 Jy/beam ! Combined flux in latest and established models = 2.75957 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 154 components and 2.75957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222583Jy sigma=1.884221 ! Fit after self-cal, rms=0.222482Jy sigma=1.882531 ! Inverting map ! Your choice of large map pixels excluded 0.508% of the data. ! The x-axis pixel size should ideally be below 0.1841 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222482Jy sigma=1.882531 ! Fit after self-cal, rms=0.224580Jy sigma=1.880718 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.508% of the data. ! The x-axis pixel size should ideally be below 0.1841 milli-arcsec ! Estimated beam: bmin=2.448 mas, bmaj=2.859 mas, bpa=-14.49 degrees ! Estimated noise=2.28199 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00451587 Jy ! Component: 100 - total flux cleaned = 0.00716232 Jy ! Component: 150 - total flux cleaned = 0.0104821 Jy ! Component: 200 - total flux cleaned = 0.0133684 Jy ! Total flux subtracted in 200 components = 0.0133684 Jy ! Clean residual min=-0.010770 max=0.012829 Jy/beam ! Clean residual mean=-0.000043 rms=0.002859 Jy/beam ! Combined flux in latest and established models = 2.77293 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 171 components and 2.77293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224165Jy sigma=1.876440 ! Fit after self-cal, rms=0.224069Jy sigma=1.875054 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.508% of the data. ! The x-axis pixel size should ideally be below 0.1841 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-24.6, -9.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0130858 Jy ! Component: 100 - total flux cleaned = 0.0178796 Jy ! Component: 150 - total flux cleaned = 0.0205668 Jy ! Component: 200 - total flux cleaned = 0.0228243 Jy ! Total flux subtracted in 200 components = 0.0228243 Jy ! Clean residual min=-0.008813 max=0.010420 Jy/beam ! Clean residual mean=-0.000037 rms=0.002557 Jy/beam ! Combined flux in latest and established models = 2.79576 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 201 components and 2.79576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223445Jy sigma=1.865672 ! Fit after self-cal, rms=0.223306Jy sigma=1.864041 ! Inverting map ! Your choice of large map pixels excluded 0.508% of the data. ! The x-axis pixel size should ideally be below 0.1841 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.508% of the data. ! The x-axis pixel size should ideally be below 0.1841 milli-arcsec ! Estimated beam: bmin=0.8137 mas, bmaj=0.9871 mas, bpa=32.74 degrees ! Estimated noise=1.56298 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8137 x 0.9871 at 32.74 degrees (North through East) ! Clean map min=-0.013489 max=1.3072 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223306Jy sigma=1.864041 ! Fit after self-cal, rms=0.107002Jy sigma=1.051429 ! Inverting map and beam ! Your choice of large map pixels excluded 0.508% of the data. ! The x-axis pixel size should ideally be below 0.1841 milli-arcsec ! Estimated beam: bmin=0.8129 mas, bmaj=0.9887 mas, bpa=32.98 degrees ! Estimated noise=1.56297 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00498702 Jy ! Component: 100 - total flux cleaned = 0.00563166 Jy ! Component: 150 - total flux cleaned = 0.00683286 Jy ! Component: 200 - total flux cleaned = 0.00796948 Jy ! Total flux subtracted in 200 components = 0.00796948 Jy ! Clean residual min=-0.010567 max=0.010545 Jy/beam ! Clean residual mean=-0.000015 rms=0.002141 Jy/beam ! Combined flux in latest and established models = 2.80373 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 218 components and 2.80373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105181Jy sigma=1.026226 ! Fit after self-cal, rms=0.105057Jy sigma=1.024661 ! Inverting map ! Your choice of large map pixels excluded 0.508% of the data. ! The x-axis pixel size should ideally be below 0.1841 milli-arcsec ! Added new window around map position (-1.4, 2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00217109 Jy ! Component: 100 - total flux cleaned = -0.00182035 Jy ! Component: 150 - total flux cleaned = -0.0015162 Jy ! Component: 200 - total flux cleaned = -0.00152041 Jy ! Total flux subtracted in 200 components = -0.00152041 Jy ! Clean residual min=-0.009428 max=0.009933 Jy/beam ! Clean residual mean=-0.000016 rms=0.002058 Jy/beam ! Combined flux in latest and established models = 2.80221 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 231 components and 2.80221 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102982Jy sigma=0.998192 ! Fit after self-cal, rms=0.102792Jy sigma=0.996177 ! Inverting map ! Your choice of large map pixels excluded 0.508% of the data. ! The x-axis pixel size should ideally be below 0.1841 milli-arcsec ! Added new window around map position (-20.8, 10.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00471427 Jy ! Component: 100 - total flux cleaned = 0.00611882 Jy ! Component: 150 - total flux cleaned = 0.00740344 Jy ! Component: 200 - total flux cleaned = 0.00789493 Jy ! Total flux subtracted in 200 components = 0.00789493 Jy ! Clean residual min=-0.009099 max=0.008757 Jy/beam ! Clean residual mean=-0.000017 rms=0.001987 Jy/beam ! Combined flux in latest and established models = 2.8101 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 238 components and 2.8101 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101185Jy sigma=0.977049 ! Fit after self-cal, rms=0.101049Jy sigma=0.975800 ! Inverting map ! Your choice of large map pixels excluded 0.508% of the data. ! The x-axis pixel size should ideally be below 0.1841 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101049Jy sigma=0.975800 ! Fit after self-cal, rms=0.100677Jy sigma=0.972900 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.508% of the data. ! The x-axis pixel size should ideally be below 0.1841 milli-arcsec ! Estimated beam: bmin=0.6877 mas, bmaj=0.8487 mas, bpa=32.3 degrees ! Estimated noise=1.75999 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.19107 Jy ! Component: 100 - total flux cleaned = 1.68101 Jy ! Component: 150 - total flux cleaned = 1.95938 Jy ! Component: 200 - total flux cleaned = 2.13356 Jy ! Total flux subtracted in 200 components = 2.13356 Jy ! Clean residual min=-0.026007 max=0.093365 Jy/beam ! Clean residual mean=-0.000084 rms=0.007468 Jy/beam ! Combined flux in latest and established models = 2.13356 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 2.13356 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.508% of the data. ! The x-axis pixel size should ideally be below 0.1841 milli-arcsec ! Estimated beam: bmin=0.8121 mas, bmaj=0.9892 mas, bpa=32.97 degrees ! Estimated noise=1.56237 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.175191 Jy ! Component: 100 - total flux cleaned = 0.27837 Jy ! Component: 150 - total flux cleaned = 0.345988 Jy ! Component: 200 - total flux cleaned = 0.395149 Jy ! Total flux subtracted in 200 components = 0.395149 Jy ! Clean residual min=-0.016107 max=0.033673 Jy/beam ! Clean residual mean=-0.000101 rms=0.004360 Jy/beam ! Combined flux in latest and established models = 2.52871 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 57 components and 2.52871 Jy ! Inverting map ! Your choice of large map pixels excluded 0.508% of the data. ! The x-axis pixel size should ideally be below 0.1841 milli-arcsec ! Added new window around map position (-1, 0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0398901 Jy ! Component: 100 - total flux cleaned = 0.0717131 Jy ! Component: 150 - total flux cleaned = 0.0982768 Jy ! Component: 200 - total flux cleaned = 0.120832 Jy ! Total flux subtracted in 200 components = 0.120832 Jy ! Clean residual min=-0.012703 max=0.016431 Jy/beam ! Clean residual mean=-0.000058 rms=0.003031 Jy/beam ! Combined flux in latest and established models = 2.64954 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 89 components and 2.64954 Jy ! Inverting map ! Your choice of large map pixels excluded 0.508% of the data. ! The x-axis pixel size should ideally be below 0.1841 milli-arcsec ! Added new window around map position (-0.8, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0198939 Jy ! Component: 100 - total flux cleaned = 0.034426 Jy ! Component: 150 - total flux cleaned = 0.0468339 Jy ! Component: 200 - total flux cleaned = 0.0586654 Jy ! Total flux subtracted in 200 components = 0.0586654 Jy ! Clean residual min=-0.012417 max=0.011824 Jy/beam ! Clean residual mean=-0.000041 rms=0.002563 Jy/beam ! Combined flux in latest and established models = 2.70821 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 109 components and 2.70821 Jy ! Inverting map ! Your choice of large map pixels excluded 0.508% of the data. ! The x-axis pixel size should ideally be below 0.1841 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.508% of the data. ! The x-axis pixel size should ideally be below 0.1841 milli-arcsec ! Estimated beam: bmin=2.447 mas, bmaj=2.861 mas, bpa=-14.09 degrees ! Estimated noise=2.28182 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0220678 Jy ! Component: 100 - total flux cleaned = 0.0380453 Jy ! Component: 150 - total flux cleaned = 0.0478434 Jy ! Component: 200 - total flux cleaned = 0.0556306 Jy ! Total flux subtracted in 200 components = 0.0556306 Jy ! Clean residual min=-0.010517 max=0.011014 Jy/beam ! Clean residual mean=-0.000061 rms=0.002835 Jy/beam ! Combined flux in latest and established models = 2.76384 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00675932 Jy ! Component: 100 - total flux cleaned = 0.0134506 Jy ! Component: 150 - total flux cleaned = 0.0191622 Jy ! Component: 200 - total flux cleaned = 0.0245985 Jy ! Total flux subtracted in 200 components = 0.0245985 Jy ! Clean residual min=-0.009066 max=0.010048 Jy/beam ! Clean residual mean=-0.000050 rms=0.002541 Jy/beam ! Combined flux in latest and established models = 2.78844 Jy ! Adding 87 model components to the UV plane model. ! The established model now contains 186 components and 2.78844 Jy ! Inverting map ! Your choice of large map pixels excluded 0.508% of the data. ! The x-axis pixel size should ideally be below 0.1841 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.508% of the data. ! The x-axis pixel size should ideally be below 0.1841 milli-arcsec ! Estimated beam: bmin=0.8121 mas, bmaj=0.9892 mas, bpa=32.97 degrees ! Estimated noise=1.56237 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00029595 Jy ! Component: 100 - total flux cleaned = 0.00135411 Jy ! Component: 150 - total flux cleaned = 0.00326085 Jy ! Component: 200 - total flux cleaned = 0.00396823 Jy ! Total flux subtracted in 200 components = 0.00396823 Jy ! Clean residual min=-0.010253 max=0.009509 Jy/beam ! Clean residual mean=-0.000021 rms=0.002109 Jy/beam ! Combined flux in latest and established models = 2.7924 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 210 components and 2.7924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101247Jy sigma=1.002350 ! Fit after self-cal, rms=0.099555Jy sigma=0.971885 wmodel J0217+7349_X_map.mod ! Writing 210 model components to file: J0217+7349_X_map.mod wobs J0217+7349_X_uvs.fits ! Writing UV FITS file: J0217+7349_X_uvs.fits wwins J0217+7349_X_map.win ! wwins: Wrote 14 windows to J0217+7349_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.508% of the data. ! The x-axis pixel size should ideally be below 0.1841 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0033844 Jy ! Component: 100 - total flux cleaned = -0.00601554 Jy ! Component: 150 - total flux cleaned = -0.00725959 Jy ! Component: 200 - total flux cleaned = -0.00755568 Jy ! Component: 250 - total flux cleaned = -0.00740934 Jy ! Component: 300 - total flux cleaned = -0.00726763 Jy ! Component: 350 - total flux cleaned = -0.00754436 Jy ! Component: 400 - total flux cleaned = -0.00781338 Jy ! Component: 450 - total flux cleaned = -0.0082099 Jy ! Component: 500 - total flux cleaned = -0.00807514 Jy ! Component: 550 - total flux cleaned = -0.00820576 Jy ! Component: 600 - total flux cleaned = -0.00871644 Jy ! Component: 650 - total flux cleaned = -0.00921808 Jy ! Component: 700 - total flux cleaned = -0.00921757 Jy ! Component: 750 - total flux cleaned = -0.00946445 Jy ! Component: 800 - total flux cleaned = -0.0095885 Jy ! Component: 850 - total flux cleaned = -0.010429 Jy ! Component: 900 - total flux cleaned = -0.0105483 Jy ! Component: 950 - total flux cleaned = -0.0110199 Jy ! Component: 1000 - total flux cleaned = -0.011716 Jy ! Component: 1050 - total flux cleaned = -0.0119445 Jy ! Component: 1100 - total flux cleaned = -0.0120572 Jy ! Component: 1150 - total flux cleaned = -0.0126219 Jy ! Component: 1200 - total flux cleaned = -0.0122881 Jy ! Component: 1250 - total flux cleaned = -0.0131768 Jy ! Component: 1300 - total flux cleaned = -0.0130661 Jy ! Component: 1350 - total flux cleaned = -0.0140473 Jy ! Component: 1400 - total flux cleaned = -0.013939 Jy ! Component: 1450 - total flux cleaned = -0.0140476 Jy ! Component: 1500 - total flux cleaned = -0.014686 Jy ! Component: 1550 - total flux cleaned = -0.0151085 Jy ! Component: 1600 - total flux cleaned = -0.0152132 Jy ! Component: 1650 - total flux cleaned = -0.0156308 Jy ! Component: 1700 - total flux cleaned = -0.0163521 Jy ! Component: 1750 - total flux cleaned = -0.0161471 Jy ! Component: 1800 - total flux cleaned = -0.0169613 Jy ! Component: 1850 - total flux cleaned = -0.0168596 Jy ! Component: 1900 - total flux cleaned = -0.0172599 Jy ! Component: 1950 - total flux cleaned = -0.0174593 Jy ! Component: 2000 - total flux cleaned = -0.0179531 Jy ! Component: 2050 - total flux cleaned = -0.0184441 Jy ! Component: 2100 - total flux cleaned = -0.0180546 Jy ! Component: 2150 - total flux cleaned = -0.0185388 Jy ! Component: 2200 - total flux cleaned = -0.0187302 Jy ! Component: 2250 - total flux cleaned = -0.0187305 Jy ! Component: 2300 - total flux cleaned = -0.019015 Jy ! Component: 2350 - total flux cleaned = -0.0188279 Jy ! Component: 2400 - total flux cleaned = -0.0193889 Jy ! Component: 2450 - total flux cleaned = -0.0192959 Jy ! Component: 2500 - total flux cleaned = -0.019573 Jy ! Component: 2550 - total flux cleaned = -0.0195732 Jy ! Component: 2600 - total flux cleaned = -0.0197551 Jy ! Component: 2650 - total flux cleaned = -0.0199364 Jy ! Component: 2700 - total flux cleaned = -0.020206 Jy ! Component: 2750 - total flux cleaned = -0.0202052 Jy ! Component: 2800 - total flux cleaned = -0.0200271 Jy ! Component: 2850 - total flux cleaned = -0.0199393 Jy ! Component: 2900 - total flux cleaned = -0.0203785 Jy ! Component: 2950 - total flux cleaned = -0.0203783 Jy ! Component: 3000 - total flux cleaned = -0.0207244 Jy ! Component: 3050 - total flux cleaned = -0.0206383 Jy ! Component: 3100 - total flux cleaned = -0.020553 Jy ! Component: 3150 - total flux cleaned = -0.0210654 Jy ! Component: 3200 - total flux cleaned = -0.0207269 Jy ! Component: 3250 - total flux cleaned = -0.0214849 Jy ! Component: 3300 - total flux cleaned = -0.0214004 Jy ! Component: 3350 - total flux cleaned = -0.0212345 Jy ! Component: 3400 - total flux cleaned = -0.0214818 Jy ! Component: 3450 - total flux cleaned = -0.0215646 Jy ! Component: 3500 - total flux cleaned = -0.0217279 Jy ! Component: 3550 - total flux cleaned = -0.0217276 Jy ! Component: 3600 - total flux cleaned = -0.0218891 Jy ! Component: 3650 - total flux cleaned = -0.0216471 Jy ! Component: 3700 - total flux cleaned = -0.0218066 Jy ! Component: 3750 - total flux cleaned = -0.021727 Jy ! Component: 3800 - total flux cleaned = -0.0218064 Jy ! Component: 3850 - total flux cleaned = -0.0220423 Jy ! Component: 3900 - total flux cleaned = -0.0225117 Jy ! Component: 3950 - total flux cleaned = -0.0223559 Jy ! Component: 4000 - total flux cleaned = -0.0220461 Jy ! Component: 4050 - total flux cleaned = -0.0222776 Jy ! Total flux subtracted in 4096 components = -0.022278 Jy ! Clean residual min=-0.003826 max=0.004105 Jy/beam ! Clean residual mean=-0.000007 rms=0.001275 Jy/beam ! Combined flux in latest and established models = 2.77013 Jy keep ! Adding 346 model components to the UV plane model. ! The established model now contains 551 components and 2.77013 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv119_uvs/J0217+7349_X_map.fits ! Inverting map ! Your choice of large map pixels excluded 0.508% of the data. ! The x-axis pixel size should ideally be below 0.1841 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8121 x 0.9892 at 32.97 degrees (North through East) ! Clean map min=-0.010721 max=1.2897 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv119_uvs/J0217+7349_X_map.fits wmodel /scr/pima/rv119_uvs/J0217+7349_X_map.mod ! Writing 551 model components to file: /scr/pima/rv119_uvs/J0217+7349_X_map.mod wobs /scr/pima/rv119_uvs/J0217+7349_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv119_uvs/J0217+7349_X_uvs.fits wwins /scr/pima/rv119_uvs/J0217+7349_X_map.win ! wwins: Wrote 15 windows to /scr/pima/rv119_uvs/J0217+7349_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.28966 invert ! Inverting map ! Your choice of large map pixels excluded 0.508% of the data. ! The x-axis pixel size should ideally be below 0.1841 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00127464 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.296506 0.296506 0.593013 1.18603 2.37205 4.7441 9.4882 18.9764 37.9528 75.9056 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0038 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.289 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1011.78 quit ! Quitting program ! Log file /scr/pima/rv119_uvs/J0217+7349_X_dfm.log closed on Sun Dec 17 11:32:27 2017