! Started logfile: /scr/pima/rv119_uvs/J0102+5824_X_dfm.log on Sun Dec 17 11:31:55 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.36575
obs     /scr/pima/rv119_uvs/J0102+5824_X_uva.fits
! Reading UV FITS file: /scr/pima/rv119_uvs/J0102+5824_X_uva.fits
! AN table 1: 56 integrations on 78 of 78 possible baselines.
! Apparent sampling: 0.180861 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0102+5824
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.36575e+09        8e+06          1        8e+06
!  02        2  8.44575e+09        8e+06          1        8e+06
!  03        3  8.80575e+09        8e+06          1        8e+06
!  04        4  8.92575e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 3160 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0102+5824_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 478 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 478 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 478 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 478 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=2.560520Jy  sigma=26.302504
! Fit after  self-cal, rms=1.375777Jy  sigma=13.958752
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.519% of the data.
!  The y-axis pixel size should ideally be below 0.1714 milli-arcsec
! Estimated beam: bmin=0.615 mas, bmaj=0.8729 mas, bpa=39.34 degrees
! Estimated noise=1.51811 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.70786 Jy
! Component: 100  -  total flux cleaned = 2.12659 Jy
! Total flux subtracted in 100 components = 2.12659 Jy
! Clean residual min=-0.033977 max=0.175776 Jy/beam
! Clean residual mean=-0.000007 rms=0.008262 Jy/beam
! Combined flux in latest and established models = 2.12659 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 2.12659 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.414555Jy  sigma=4.167348
! Fit after  self-cal, rms=0.413394Jy  sigma=4.158807
! Inverting map 
! Your choice of large map pixels excluded 0.519% of the data.
!  The y-axis pixel size should ideally be below 0.1714 milli-arcsec
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.19981 Jy
! Component: 100  -  total flux cleaned = 0.323201 Jy
! Total flux subtracted in 100 components = 0.323201 Jy
! Clean residual min=-0.021663 max=0.065165 Jy/beam
! Clean residual mean=0.000037 rms=0.004564 Jy/beam
! Combined flux in latest and established models = 2.44979 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 18 components and 2.44979 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.233171Jy  sigma=2.300128
! Fit after  self-cal, rms=0.231219Jy  sigma=2.283448
! Inverting map 
! Your choice of large map pixels excluded 0.519% of the data.
!  The y-axis pixel size should ideally be below 0.1714 milli-arcsec
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0829693 Jy
! Component: 100  -  total flux cleaned = 0.136538 Jy
! Total flux subtracted in 100 components = 0.136538 Jy
! Clean residual min=-0.016828 max=0.042704 Jy/beam
! Clean residual mean=0.000056 rms=0.003436 Jy/beam
! Combined flux in latest and established models = 2.58633 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 21 components and 2.58633 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.180331Jy  sigma=1.745891
! Fit after  self-cal, rms=0.179383Jy  sigma=1.737489
! Inverting map 
! Your choice of large map pixels excluded 0.519% of the data.
!  The y-axis pixel size should ideally be below 0.1714 milli-arcsec
! Added new window around map position (-1.2, -0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0437573 Jy
! Component: 100  -  total flux cleaned = 0.0722969 Jy
! Total flux subtracted in 100 components = 0.0722969 Jy
! Clean residual min=-0.016245 max=0.024820 Jy/beam
! Clean residual mean=0.000067 rms=0.003040 Jy/beam
! Combined flux in latest and established models = 2.65863 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 29 components and 2.65863 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.162534Jy  sigma=1.562193
! Fit after  self-cal, rms=0.161739Jy  sigma=1.553255
! Inverting map 
! Your choice of large map pixels excluded 0.519% of the data.
!  The y-axis pixel size should ideally be below 0.1714 milli-arcsec
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0238085 Jy
! Component: 100  -  total flux cleaned = 0.0378869 Jy
! Total flux subtracted in 100 components = 0.0378869 Jy
! Clean residual min=-0.015883 max=0.019153 Jy/beam
! Clean residual mean=0.000073 rms=0.002883 Jy/beam
! Combined flux in latest and established models = 2.69651 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 36 components and 2.69651 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.156417Jy  sigma=1.498945
! Fit after  self-cal, rms=0.156153Jy  sigma=1.495655
! Inverting map 
! Your choice of large map pixels excluded 0.519% of the data.
!  The y-axis pixel size should ideally be below 0.1714 milli-arcsec
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.519% of the data.
!  The y-axis pixel size should ideally be below 0.1714 milli-arcsec
! Estimated beam: bmin=0.7249 mas, bmaj=1.004 mas, bpa=38.54 degrees
! Estimated noise=1.3453 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0195266 Jy
! Component: 100  -  total flux cleaned = 0.0260879 Jy
! Component: 150  -  total flux cleaned = 0.0296131 Jy
! Component: 200  -  total flux cleaned = 0.0328168 Jy
! Total flux subtracted in 200 components = 0.0328168 Jy
! Clean residual min=-0.016242 max=0.015028 Jy/beam
! Clean residual mean=0.000236 rms=0.003368 Jy/beam
! Combined flux in latest and established models = 2.72933 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 38 components and 2.72933 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.152933Jy  sigma=1.465200
! Fit after  self-cal, rms=0.152657Jy  sigma=1.461884
! Inverting map 
! Your choice of large map pixels excluded 0.519% of the data.
!  The y-axis pixel size should ideally be below 0.1714 milli-arcsec
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7249 x 1.004 at 38.54 degrees (North through East)
! Clean map  min=-0.015172  max=2.2424 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 60 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.01     KP        0.99     
!   LA        1.02     MK        1.02     NL        1.01     NY        0.99     
!   ON        0.99     OV        1.01     PT        1.00     SC        1.00     
!   WZ        1.05     
! 
! 
! Correcting IF 2.
!  A total of 60 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.01     KP        1.00     
!   LA        1.02     MK        1.02     NL        0.99     NY        0.98     
!   ON        1.00     OV        1.00     PT        1.00     SC        1.00     
!   WZ        1.02     
! 
! 
! Correcting IF 3.
!  A total of 60 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.00     KP        1.00     
!   LA        1.02     MK        1.01     NL        1.01     NY        1.00     
!   ON        1.01     OV        0.99     PT        0.99     SC        0.99     
!   WZ        0.98     
! 
! 
! Correcting IF 4.
!  A total of 60 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.01     KP        0.99     
!   LA        1.02     MK        1.00     NL        1.01     NY        0.98     
!   ON        1.01     OV        0.99     PT        1.00     SC        0.99     
!   WZ        0.98     
! 
! 
! Fit before self-cal, rms=0.152657Jy  sigma=1.461884
! Fit after  self-cal, rms=0.142682Jy  sigma=1.364738
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.563% of the data.
!  The y-axis pixel size should ideally be below 0.1714 milli-arcsec
! Estimated beam: bmin=0.7119 mas, bmaj=1.028 mas, bpa=38.46 degrees
! Estimated noise=1.39478 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00293286 Jy
! Component: 100  -  total flux cleaned = -0.00183941 Jy
! Component: 150  -  total flux cleaned = -0.00112719 Jy
! Component: 200  -  total flux cleaned = -0.000821591 Jy
! Total flux subtracted in 200 components = -0.000821591 Jy
! Clean residual min=-0.014564 max=0.013795 Jy/beam
! Clean residual mean=0.000231 rms=0.003197 Jy/beam
! Combined flux in latest and established models = 2.72851 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 45 components and 2.72851 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.141895Jy  sigma=1.359227
! Fit after  self-cal, rms=0.141816Jy  sigma=1.358261
! Inverting map 
! Your choice of large map pixels excluded 0.563% of the data.
!  The y-axis pixel size should ideally be below 0.1714 milli-arcsec
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.141816Jy  sigma=1.358261
! Fit after  self-cal, rms=0.098626Jy  sigma=0.913874
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.563% of the data.
!  The y-axis pixel size should ideally be below 0.1714 milli-arcsec
! Estimated beam: bmin=0.7111 mas, bmaj=1.03 mas, bpa=38.44 degrees
! Estimated noise=1.39701 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00255782 Jy
! Component: 100  -  total flux cleaned = 0.0020601 Jy
! Component: 150  -  total flux cleaned = 0.00223034 Jy
! Component: 200  -  total flux cleaned = 0.0025302 Jy
! Total flux subtracted in 200 components = 0.0025302 Jy
! Clean residual min=-0.006832 max=0.007067 Jy/beam
! Clean residual mean=0.000051 rms=0.001422 Jy/beam
! Combined flux in latest and established models = 2.73104 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 50 components and 2.73104 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097606Jy  sigma=0.903191
! Fit after  self-cal, rms=0.097474Jy  sigma=0.901731
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.563% of the data.
!  The y-axis pixel size should ideally be below 0.1714 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.4, 11).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0033792 Jy
! Component: 100  -  total flux cleaned = 0.00404052 Jy
! Component: 150  -  total flux cleaned = 0.0045799 Jy
! Component: 200  -  total flux cleaned = 0.00492682 Jy
! Total flux subtracted in 200 components = 0.00492682 Jy
! Clean residual min=-0.006802 max=0.006487 Jy/beam
! Clean residual mean=0.000050 rms=0.001395 Jy/beam
! Combined flux in latest and established models = 2.73597 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 60 components and 2.73597 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096916Jy  sigma=0.894875
! Fit after  self-cal, rms=0.096852Jy  sigma=0.894331
! Inverting map 
! Your choice of large map pixels excluded 0.563% of the data.
!  The y-axis pixel size should ideally be below 0.1714 milli-arcsec
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096852Jy  sigma=0.894331
! Fit after  self-cal, rms=0.093185Jy  sigma=0.859718
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.563% of the data.
!  The y-axis pixel size should ideally be below 0.1714 milli-arcsec
! Estimated beam: bmin=0.7101 mas, bmaj=1.029 mas, bpa=38.36 degrees
! Estimated noise=1.39653 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00220681 Jy
! Component: 100  -  total flux cleaned = 0.00235588 Jy
! Component: 150  -  total flux cleaned = 0.00247691 Jy
! Component: 200  -  total flux cleaned = 0.00247412 Jy
! Total flux subtracted in 200 components = 0.00247412 Jy
! Clean residual min=-0.005197 max=0.005464 Jy/beam
! Clean residual mean=0.000023 rms=0.001190 Jy/beam
! Combined flux in latest and established models = 2.73844 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 64 components and 2.73844 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092684Jy  sigma=0.854659
! Fit after  self-cal, rms=0.092639Jy  sigma=0.854112
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.563% of the data.
!  The y-axis pixel size should ideally be below 0.1714 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.2, -1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00391429 Jy
! Component: 100  -  total flux cleaned = 0.00451399 Jy
! Component: 150  -  total flux cleaned = 0.00489433 Jy
! Component: 200  -  total flux cleaned = 0.00523956 Jy
! Total flux subtracted in 200 components = 0.00523956 Jy
! Clean residual min=-0.005215 max=0.004973 Jy/beam
! Clean residual mean=0.000024 rms=0.001163 Jy/beam
! Combined flux in latest and established models = 2.74368 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 76 components and 2.74368 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092125Jy  sigma=0.849060
! Fit after  self-cal, rms=0.092060Jy  sigma=0.848613
! Inverting map 
! Your choice of large map pixels excluded 0.563% of the data.
!  The y-axis pixel size should ideally be below 0.1714 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092060Jy  sigma=0.848613
! Fit after  self-cal, rms=0.091713Jy  sigma=0.846966
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.563% of the data.
!  The y-axis pixel size should ideally be below 0.1714 milli-arcsec
! Estimated beam: bmin=2.44 mas, bmaj=2.764 mas, bpa=-63.16 degrees
! Estimated noise=2.09188 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00515056 Jy
! Component: 100  -  total flux cleaned = 0.00720495 Jy
! Component: 150  -  total flux cleaned = 0.00759936 Jy
! Component: 200  -  total flux cleaned = 0.007788 Jy
! Total flux subtracted in 200 components = 0.007788 Jy
! Clean residual min=-0.008011 max=0.006735 Jy/beam
! Clean residual mean=0.000070 rms=0.001908 Jy/beam
! Combined flux in latest and established models = 2.75147 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 83 components and 2.75147 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091496Jy  sigma=0.845314
! Fit after  self-cal, rms=0.091466Jy  sigma=0.844929
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.563% of the data.
!  The y-axis pixel size should ideally be below 0.1714 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000655934 Jy
! Component: 100  -  total flux cleaned = 0.000767253 Jy
! Component: 150  -  total flux cleaned = 0.000856724 Jy
! Component: 200  -  total flux cleaned = 0.000943238 Jy
! Total flux subtracted in 200 components = 0.000943238 Jy
! Clean residual min=-0.007972 max=0.006778 Jy/beam
! Clean residual mean=0.000070 rms=0.001908 Jy/beam
! Combined flux in latest and established models = 2.75241 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 88 components and 2.75241 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091435Jy  sigma=0.844815
! Fit after  self-cal, rms=0.091434Jy  sigma=0.844726
! Inverting map 
! Your choice of large map pixels excluded 0.563% of the data.
!  The y-axis pixel size should ideally be below 0.1714 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Your choice of large map pixels excluded 0.563% of the data.
!  The y-axis pixel size should ideally be below 0.1714 milli-arcsec
! Estimated beam: bmin=0.7095 mas, bmaj=1.029 mas, bpa=38.34 degrees
! Estimated noise=1.3967 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7095 x 1.029 at 38.34 degrees (North through East)
! Clean map  min=-0.0045995  max=2.2408 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091434Jy  sigma=0.844726
! Fit after  self-cal, rms=0.078062Jy  sigma=0.686740
! Inverting map and beam 
! Your choice of large map pixels excluded 0.563% of the data.
!  The y-axis pixel size should ideally be below 0.1714 milli-arcsec
! Estimated beam: bmin=0.7095 mas, bmaj=1.029 mas, bpa=38.35 degrees
! Estimated noise=1.39744 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00306658 Jy
! Component: 100  -  total flux cleaned = 0.00356553 Jy
! Component: 150  -  total flux cleaned = 0.00378288 Jy
! Component: 200  -  total flux cleaned = 0.00388684 Jy
! Total flux subtracted in 200 components = 0.00388684 Jy
! Clean residual min=-0.005202 max=0.004889 Jy/beam
! Clean residual mean=0.000026 rms=0.001132 Jy/beam
! Combined flux in latest and established models = 2.7563 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 91 components and 2.7563 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077633Jy  sigma=0.681903
! Fit after  self-cal, rms=0.077602Jy  sigma=0.681643
! Inverting map 
! Your choice of large map pixels excluded 0.563% of the data.
!  The y-axis pixel size should ideally be below 0.1714 milli-arcsec
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000107778 Jy
! Component: 100  -  total flux cleaned = 0.000108236 Jy
! Component: 150  -  total flux cleaned = 0.000192527 Jy
! Component: 200  -  total flux cleaned = 0.0002724 Jy
! Total flux subtracted in 200 components = 0.0002724 Jy
! Clean residual min=-0.005201 max=0.004867 Jy/beam
! Clean residual mean=0.000026 rms=0.001125 Jy/beam
! Combined flux in latest and established models = 2.75657 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 96 components and 2.75657 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077395Jy  sigma=0.679251
! Fit after  self-cal, rms=0.077382Jy  sigma=0.679131
! Inverting map 
! Your choice of large map pixels excluded 0.563% of the data.
!  The y-axis pixel size should ideally be below 0.1714 milli-arcsec
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077382Jy  sigma=0.679131
! Fit after  self-cal, rms=0.077117Jy  sigma=0.678051
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.563% of the data.
!  The y-axis pixel size should ideally be below 0.1714 milli-arcsec
! Estimated beam: bmin=0.6027 mas, bmaj=0.8977 mas, bpa=38.74 degrees
! Estimated noise=1.56984 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.70511 Jy
! Component: 100  -  total flux cleaned = 2.1367 Jy
! Component: 150  -  total flux cleaned = 2.34114 Jy
! Component: 200  -  total flux cleaned = 2.46628 Jy
! Total flux subtracted in 200 components = 2.46628 Jy
! Clean residual min=-0.013595 max=0.065868 Jy/beam
! Clean residual mean=-0.000030 rms=0.003657 Jy/beam
! Combined flux in latest and established models = 2.46628 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 2.46628 Jy
! Inverting map and beam 
! Your choice of large map pixels excluded 0.563% of the data.
!  The y-axis pixel size should ideally be below 0.1714 milli-arcsec
! Estimated beam: bmin=0.709 mas, bmaj=1.029 mas, bpa=38.34 degrees
! Estimated noise=1.39766 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.113274 Jy
! Component: 100  -  total flux cleaned = 0.17781 Jy
! Component: 150  -  total flux cleaned = 0.216921 Jy
! Component: 200  -  total flux cleaned = 0.24106 Jy
! Total flux subtracted in 200 components = 0.24106 Jy
! Clean residual min=-0.006446 max=0.012864 Jy/beam
! Clean residual mean=0.000015 rms=0.001455 Jy/beam
! Combined flux in latest and established models = 2.70734 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 42 components and 2.70734 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.563% of the data.
!  The y-axis pixel size should ideally be below 0.1714 milli-arcsec
! Added new window around map position (0.2, -0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0157526 Jy
! Component: 100  -  total flux cleaned = 0.0266348 Jy
! Component: 150  -  total flux cleaned = 0.0345089 Jy
! Component: 200  -  total flux cleaned = 0.038057 Jy
! Total flux subtracted in 200 components = 0.038057 Jy
! Clean residual min=-0.005368 max=0.005714 Jy/beam
! Clean residual mean=0.000023 rms=0.001182 Jy/beam
! Combined flux in latest and established models = 2.7454 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 67 components and 2.7454 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.563% of the data.
!  The y-axis pixel size should ideally be below 0.1714 milli-arcsec
! Added new window around map position (1.6, 0.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00420197 Jy
! Component: 100  -  total flux cleaned = 0.00632198 Jy
! Component: 150  -  total flux cleaned = 0.00803654 Jy
! Component: 200  -  total flux cleaned = 0.00928281 Jy
! Total flux subtracted in 200 components = 0.00928281 Jy
! Clean residual min=-0.005492 max=0.005027 Jy/beam
! Clean residual mean=0.000025 rms=0.001142 Jy/beam
! Combined flux in latest and established models = 2.75468 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 75 components and 2.75468 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.563% of the data.
!  The y-axis pixel size should ideally be below 0.1714 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.563% of the data.
!  The y-axis pixel size should ideally be below 0.1714 milli-arcsec
! Estimated beam: bmin=2.439 mas, bmaj=2.763 mas, bpa=-63.28 degrees
! Estimated noise=2.09629 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00459594 Jy
! Component: 100  -  total flux cleaned = 0.00590078 Jy
! Component: 150  -  total flux cleaned = 0.00678136 Jy
! Component: 200  -  total flux cleaned = 0.00753311 Jy
! Total flux subtracted in 200 components = 0.00753311 Jy
! Clean residual min=-0.007428 max=0.006849 Jy/beam
! Clean residual mean=0.000074 rms=0.001874 Jy/beam
! Combined flux in latest and established models = 2.76222 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000426062 Jy
! Component: 100  -  total flux cleaned = 0.000590646 Jy
! Component: 150  -  total flux cleaned = 0.0007034 Jy
! Component: 200  -  total flux cleaned = 0.000737877 Jy
! Total flux subtracted in 200 components = 0.000737877 Jy
! Clean residual min=-0.007452 max=0.006856 Jy/beam
! Clean residual mean=0.000074 rms=0.001870 Jy/beam
! Combined flux in latest and established models = 2.76295 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 103 components and 2.76295 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.563% of the data.
!  The y-axis pixel size should ideally be below 0.1714 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Your choice of large map pixels excluded 0.563% of the data.
!  The y-axis pixel size should ideally be below 0.1714 milli-arcsec
! Estimated beam: bmin=0.709 mas, bmaj=1.029 mas, bpa=38.34 degrees
! Estimated noise=1.39766 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000620352 Jy
! Component: 100  -  total flux cleaned = -0.000508991 Jy
! Component: 150  -  total flux cleaned = -0.000405762 Jy
! Component: 200  -  total flux cleaned = -0.000302384 Jy
! Total flux subtracted in 200 components = -0.000302384 Jy
! Clean residual min=-0.005519 max=0.005016 Jy/beam
! Clean residual mean=0.000026 rms=0.001120 Jy/beam
! Combined flux in latest and established models = 2.76265 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 117 components and 2.76265 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078075Jy  sigma=0.690341
! Fit after  self-cal, rms=0.077577Jy  sigma=0.684275
wmodel J0102+5824_X_map.mod
! Writing 117 model components to file: J0102+5824_X_map.mod
wobs   J0102+5824_X_uvs.fits
! Writing UV FITS file: J0102+5824_X_uvs.fits
wwins  J0102+5824_X_map.win
! wwins: Wrote 6 windows to J0102+5824_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! Your choice of large map pixels excluded 0.563% of the data.
!  The y-axis pixel size should ideally be below 0.1714 milli-arcsec
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000600076 Jy
! Component: 100  -  total flux cleaned = -0.000337617 Jy
! Component: 150  -  total flux cleaned = 0.000259873 Jy
! Component: 200  -  total flux cleaned = 0.00100545 Jy
! Component: 250  -  total flux cleaned = 0.00132941 Jy
! Component: 300  -  total flux cleaned = 0.00180767 Jy
! Component: 350  -  total flux cleaned = 0.00219983 Jy
! Component: 400  -  total flux cleaned = 0.00258543 Jy
! Component: 450  -  total flux cleaned = 0.00288884 Jy
! Component: 500  -  total flux cleaned = 0.00318933 Jy
! Component: 550  -  total flux cleaned = 0.00348783 Jy
! Component: 600  -  total flux cleaned = 0.00385628 Jy
! Component: 650  -  total flux cleaned = 0.0041474 Jy
! Component: 700  -  total flux cleaned = 0.00429136 Jy
! Component: 750  -  total flux cleaned = 0.00464914 Jy
! Component: 800  -  total flux cleaned = 0.00464945 Jy
! Component: 850  -  total flux cleaned = 0.00507062 Jy
! Component: 900  -  total flux cleaned = 0.0052789 Jy
! Component: 950  -  total flux cleaned = 0.00562326 Jy
! Component: 1000  -  total flux cleaned = 0.00596495 Jy
! Component: 1050  -  total flux cleaned = 0.00596468 Jy
! Component: 1100  -  total flux cleaned = 0.00650267 Jy
! Component: 1150  -  total flux cleaned = 0.00656924 Jy
! Component: 1200  -  total flux cleaned = 0.00670196 Jy
! Component: 1250  -  total flux cleaned = 0.00703099 Jy
! Component: 1300  -  total flux cleaned = 0.00709618 Jy
! Component: 1350  -  total flux cleaned = 0.00729136 Jy
! Component: 1400  -  total flux cleaned = 0.00735637 Jy
! Component: 1450  -  total flux cleaned = 0.00748379 Jy
! Component: 1500  -  total flux cleaned = 0.00767503 Jy
! Component: 1550  -  total flux cleaned = 0.0077385 Jy
! Component: 1600  -  total flux cleaned = 0.00780089 Jy
! Component: 1650  -  total flux cleaned = 0.00817537 Jy
! Component: 1700  -  total flux cleaned = 0.00823678 Jy
! Component: 1750  -  total flux cleaned = 0.00829844 Jy
! Component: 1800  -  total flux cleaned = 0.00860482 Jy
! Component: 1850  -  total flux cleaned = 0.00848292 Jy
! Component: 1900  -  total flux cleaned = 0.00884585 Jy
! Component: 1950  -  total flux cleaned = 0.0084841 Jy
! Component: 2000  -  total flux cleaned = 0.00914279 Jy
! Component: 2050  -  total flux cleaned = 0.00902381 Jy
! Component: 2100  -  total flux cleaned = 0.00902305 Jy
! Component: 2150  -  total flux cleaned = 0.00914105 Jy
! Component: 2200  -  total flux cleaned = 0.00919993 Jy
! Component: 2250  -  total flux cleaned = 0.00902506 Jy
! Component: 2300  -  total flux cleaned = 0.00925731 Jy
! Component: 2350  -  total flux cleaned = 0.00919961 Jy
! Component: 2400  -  total flux cleaned = 0.00942913 Jy
! Component: 2450  -  total flux cleaned = 0.00948612 Jy
! Component: 2500  -  total flux cleaned = 0.00920162 Jy
! Component: 2550  -  total flux cleaned = 0.00937058 Jy
! Component: 2600  -  total flux cleaned = 0.00937074 Jy
! Component: 2650  -  total flux cleaned = 0.00914675 Jy
! Component: 2700  -  total flux cleaned = 0.00903555 Jy
! Component: 2750  -  total flux cleaned = 0.00925778 Jy
! Component: 2800  -  total flux cleaned = 0.00925804 Jy
! Component: 2850  -  total flux cleaned = 0.00925785 Jy
! Component: 2900  -  total flux cleaned = 0.00925775 Jy
! Component: 2950  -  total flux cleaned = 0.00931187 Jy
! Component: 3000  -  total flux cleaned = 0.00925766 Jy
! Component: 3050  -  total flux cleaned = 0.0091496 Jy
! Component: 3100  -  total flux cleaned = 0.00952693 Jy
! Component: 3150  -  total flux cleaned = 0.00931218 Jy
! Component: 3200  -  total flux cleaned = 0.00936589 Jy
! Component: 3250  -  total flux cleaned = 0.00925969 Jy
! Component: 3300  -  total flux cleaned = 0.00920731 Jy
! Component: 3350  -  total flux cleaned = 0.00920722 Jy
! Component: 3400  -  total flux cleaned = 0.00926001 Jy
! Component: 3450  -  total flux cleaned = 0.00936515 Jy
! Component: 3500  -  total flux cleaned = 0.00915653 Jy
! Component: 3550  -  total flux cleaned = 0.0093641 Jy
! Component: 3600  -  total flux cleaned = 0.00931217 Jy
! Component: 3650  -  total flux cleaned = 0.00931233 Jy
! Component: 3700  -  total flux cleaned = 0.00936403 Jy
! Component: 3750  -  total flux cleaned = 0.00941534 Jy
! Component: 3800  -  total flux cleaned = 0.00931345 Jy
! Component: 3850  -  total flux cleaned = 0.00921205 Jy
! Component: 3900  -  total flux cleaned = 0.00926243 Jy
! Component: 3950  -  total flux cleaned = 0.00931297 Jy
! Component: 4000  -  total flux cleaned = 0.00931281 Jy
! Component: 4050  -  total flux cleaned = 0.00911268 Jy
! Total flux subtracted in 4096 components = 0.00921277 Jy
! Clean residual min=-0.002811 max=0.002489 Jy/beam
! Clean residual mean=0.000023 rms=0.000831 Jy/beam
! Combined flux in latest and established models = 2.77186 Jy
keep
! Adding 383 model components to the UV plane model.
! The established model now contains 499 components and 2.77186 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv119_uvs/J0102+5824_X_map.fits
! Inverting map 
! Your choice of large map pixels excluded 0.563% of the data.
!  The y-axis pixel size should ideally be below 0.1714 milli-arcsec
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.709 x 1.029 at 38.34 degrees (North through East)
! Clean map  min=-0.0041348  max=2.2421 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv119_uvs/J0102+5824_X_map.fits
wmodel /scr/pima/rv119_uvs/J0102+5824_X_map.mod
! Writing 499 model components to file: /scr/pima/rv119_uvs/J0102+5824_X_map.mod
wobs   /scr/pima/rv119_uvs/J0102+5824_X_uvs.fits
! Writing UV FITS file: /scr/pima/rv119_uvs/J0102+5824_X_uvs.fits
wwins  /scr/pima/rv119_uvs/J0102+5824_X_map.win
! wwins: Wrote 7 windows to /scr/pima/rv119_uvs/J0102+5824_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 2.24213 
invert
! Inverting map 
! Your choice of large map pixels excluded 0.563% of the data.
!  The y-axis pixel size should ideally be below 0.1714 milli-arcsec
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000830453 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.111116 0.111116 0.222232 0.444463 0.888927 1.77785 3.55571 7.11141 14.2228 28.4457 56.8913
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0024 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       2.242 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  2699.89 
quit
! Quitting program
! Log file /scr/pima/rv119_uvs/J0102+5824_X_dfm.log closed on Sun Dec 17 11:32:00 2017