! Started logfile: /scr/pima/rv119_uvs/J0051-4226_X_dfm.log on Sun Dec 17 11:31:40 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.36575
obs     /scr/pima/rv119_uvs/J0051-4226_X_uva.fits
! Reading UV FITS file: /scr/pima/rv119_uvs/J0051-4226_X_uva.fits
! AN table 1: 2 integrations on 10 of 10 possible baselines.
! AN table 2: 2 integrations on 10 of 10 possible baselines.
! AN table 3: 2 integrations on 3 of 3 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J0051-4226
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.36575e+09        8e+06          1        8e+06
!  02        2  8.44575e+09        8e+06          1        8e+06
!  03        3  8.80575e+09        8e+06          1        8e+06
!  04        4  8.92575e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 184 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0051-4226_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 5 telescope corrections were flagged in sub-array 1.
!  A total of 5 telescope corrections were flagged in sub-array 2.
!  A total of 3 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 2.
!  A total of 5 telescope corrections were flagged in sub-array 1.
!  A total of 5 telescope corrections were flagged in sub-array 2.
!  A total of 3 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 3.
!  A total of 5 telescope corrections were flagged in sub-array 1.
!  A total of 5 telescope corrections were flagged in sub-array 2.
!  A total of 3 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 4.
!  A total of 5 telescope corrections were flagged in sub-array 1.
!  A total of 5 telescope corrections were flagged in sub-array 2.
!  A total of 3 telescope corrections were flagged in sub-array 3.
! 
! Fit before self-cal, rms=1.235041Jy  sigma=13.296806
! Fit after  self-cal, rms=0.542576Jy  sigma=5.267745
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7755 mas, bmaj=3.694 mas, bpa=3.088 degrees
! Estimated noise=8.65669 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.400092 Jy
! Component: 100  -  total flux cleaned = 0.523074 Jy
! Total flux subtracted in 100 components = 0.523074 Jy
! Clean residual min=-0.100823 max=0.084820 Jy/beam
! Clean residual mean=-0.000404 rms=0.022160 Jy/beam
! Combined flux in latest and established models = 0.523074 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.523074 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.282521Jy  sigma=2.996675
! Fit after  self-cal, rms=0.284356Jy  sigma=2.991849
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9566 mas, bmaj=4.582 mas, bpa=2.044 degrees
! Estimated noise=7.35474 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0845239 Jy
! Component: 100  -  total flux cleaned = 0.127356 Jy
! Component: 150  -  total flux cleaned = 0.150024 Jy
! Component: 200  -  total flux cleaned = 0.159916 Jy
! Total flux subtracted in 200 components = 0.159916 Jy
! Clean residual min=-0.079641 max=0.065148 Jy/beam
! Clean residual mean=0.000610 rms=0.020176 Jy/beam
! Combined flux in latest and established models = 0.68299 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 23 components and 0.68299 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.264105Jy  sigma=2.710051
! Fit after  self-cal, rms=0.266288Jy  sigma=2.706700
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9566 x 4.582 at 2.044 degrees (North through East)
! Clean map  min=-0.076201  max=0.52046 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     KP        0.90     LA        1.10     PT        1.07     
!   SC        0.96     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.04     KP        1.12     LA        1.23     NL        1.08     
!   SC        1.22     
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   KP        0.00*    MK        0.00*    OV        0.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.93     KP        1.00     LA        1.07     PT        1.07     
!   SC        0.88     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.83     KP        2.33     LA        0.76     NL        1.30     
!   SC        0.97     
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   KP        0.00*    MK        0.00*    OV        0.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.06     KP        0.95     LA        1.09     PT        1.06     
!   SC        0.92     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.68     KP        0.89     LA        1.38     NL        1.65     
!   SC        1.06     
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   KP        0.00*    MK        0.00*    OV        0.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     KP        1.05     LA        1.14     PT        0.99     
!   SC        0.97     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.42     KP        0.96     LA        1.32     NL        1.18     
!   SC        4.43     
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   KP        0.00*    MK        0.00*    OV        0.00*    
! 
! 
! Fit before self-cal, rms=0.266288Jy  sigma=2.706700
! Fit after  self-cal, rms=0.480533Jy  sigma=1.941922
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.027 mas, bmaj=6.822 mas, bpa=5.64 degrees
! Estimated noise=8.18369 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00632558 Jy
! Component: 100  -  total flux cleaned = -0.00573552 Jy
! Component: 150  -  total flux cleaned = -0.00476378 Jy
! Component: 200  -  total flux cleaned = -0.00435244 Jy
! Total flux subtracted in 200 components = -0.00435244 Jy
! Clean residual min=-0.057008 max=0.067367 Jy/beam
! Clean residual mean=0.000194 rms=0.016505 Jy/beam
! Combined flux in latest and established models = 0.678638 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 36 components and 0.678638 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.471654Jy  sigma=1.963219
! Fit after  self-cal, rms=0.499179Jy  sigma=1.892348
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.499179Jy  sigma=1.892348
! Fit after  self-cal, rms=0.614823Jy  sigma=1.876494
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.041 mas, bmaj=6.974 mas, bpa=5.156 degrees
! Estimated noise=8.27277 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00612179 Jy
! Component: 100  -  total flux cleaned = -0.00610962 Jy
! Component: 150  -  total flux cleaned = -0.00612388 Jy
! Component: 200  -  total flux cleaned = -0.00612519 Jy
! Total flux subtracted in 200 components = -0.00612519 Jy
! Clean residual min=-0.058660 max=0.068635 Jy/beam
! Clean residual mean=0.000152 rms=0.016746 Jy/beam
! Combined flux in latest and established models = 0.672513 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 42 components and 0.672513 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.596759Jy  sigma=1.902249
! Fit after  self-cal, rms=0.608794Jy  sigma=1.874663
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00016809 Jy
! Component: 100  -  total flux cleaned = 0.000186024 Jy
! Component: 150  -  total flux cleaned = 0.000221002 Jy
! Component: 200  -  total flux cleaned = 0.000228922 Jy
! Total flux subtracted in 200 components = 0.000228922 Jy
! Clean residual min=-0.058616 max=0.068427 Jy/beam
! Clean residual mean=0.000153 rms=0.016701 Jy/beam
! Combined flux in latest and established models = 0.672742 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 49 components and 0.672742 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.592703Jy  sigma=1.899526
! Fit after  self-cal, rms=0.604701Jy  sigma=1.873940
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.604701Jy  sigma=1.873940
! Fit after  self-cal, rms=0.636701Jy  sigma=1.867777
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.049 mas, bmaj=7.083 mas, bpa=4.815 degrees
! Estimated noise=8.27038 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00663713 Jy
! Component: 100  -  total flux cleaned = -0.00645202 Jy
! Component: 150  -  total flux cleaned = -0.0062932 Jy
! Component: 200  -  total flux cleaned = -0.00560118 Jy
! Total flux subtracted in 200 components = -0.00560118 Jy
! Clean residual min=-0.058723 max=0.069339 Jy/beam
! Clean residual mean=0.000131 rms=0.016525 Jy/beam
! Combined flux in latest and established models = 0.667141 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 52 components and 0.667141 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.619407Jy  sigma=1.892454
! Fit after  self-cal, rms=0.631801Jy  sigma=1.869228
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.3495e-05 Jy
! Component: 100  -  total flux cleaned = -1.69274e-05 Jy
! Component: 150  -  total flux cleaned = -7.71666e-05 Jy
! Component: 200  -  total flux cleaned = -0.000110978 Jy
! Total flux subtracted in 200 components = -0.000110978 Jy
! Clean residual min=-0.058329 max=0.068734 Jy/beam
! Clean residual mean=0.000130 rms=0.016517 Jy/beam
! Combined flux in latest and established models = 0.66703 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 58 components and 0.66703 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.616020Jy  sigma=1.892080
! Fit after  self-cal, rms=0.628118Jy  sigma=1.871537
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.628118Jy  sigma=1.871537
! Fit after  self-cal, rms=0.662230Jy  sigma=1.865918
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.884 mas, bmaj=12.14 mas, bpa=-4.333 degrees
! Estimated noise=9.39554 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00170618 Jy
! Component: 100  -  total flux cleaned = -0.00173417 Jy
! Component: 150  -  total flux cleaned = -0.00174563 Jy
! Component: 200  -  total flux cleaned = -0.00175289 Jy
! Total flux subtracted in 200 components = -0.00175289 Jy
! Clean residual min=-0.049354 max=0.057441 Jy/beam
! Clean residual mean=0.000269 rms=0.015849 Jy/beam
! Combined flux in latest and established models = 0.665277 Jy
selfcal
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 59 components and 0.665277 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.656625Jy  sigma=1.872565
! Fit after  self-cal, rms=0.660549Jy  sigma=1.866111
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000757862 Jy
! Component: 100  -  total flux cleaned = -0.000772565 Jy
! Component: 150  -  total flux cleaned = -0.000780804 Jy
! Component: 200  -  total flux cleaned = -0.000787053 Jy
! Total flux subtracted in 200 components = -0.000787053 Jy
! Clean residual min=-0.049070 max=0.057280 Jy/beam
! Clean residual mean=0.000261 rms=0.015856 Jy/beam
! Combined flux in latest and established models = 0.66449 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 59 components and 0.66449 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.655374Jy  sigma=1.872970
! Fit after  self-cal, rms=0.659024Jy  sigma=1.867484
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.055 mas, bmaj=7.197 mas, bpa=4.495 degrees
! Estimated noise=8.26113 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.055 x 7.197 at 4.495 degrees (North through East)
! Clean map  min=-0.076161  max=0.5327 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.659024Jy  sigma=1.867484
! Fit after  self-cal, rms=0.660496Jy  sigma=1.865973
! Inverting map and beam 
! Estimated beam: bmin=1.062 mas, bmaj=7.217 mas, bpa=4.49 degrees
! Estimated noise=8.31754 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00519328 Jy
! Component: 100  -  total flux cleaned = -0.00518918 Jy
! Component: 150  -  total flux cleaned = -0.00522499 Jy
! Component: 200  -  total flux cleaned = -0.00527896 Jy
! Total flux subtracted in 200 components = -0.00527896 Jy
! Clean residual min=-0.058542 max=0.070783 Jy/beam
! Clean residual mean=0.000089 rms=0.016467 Jy/beam
! Combined flux in latest and established models = 0.659211 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 62 components and 0.659211 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.644055Jy  sigma=1.887153
! Fit after  self-cal, rms=0.656049Jy  sigma=1.870128
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.637e-05 Jy
! Component: 100  -  total flux cleaned = 6.28195e-05 Jy
! Component: 150  -  total flux cleaned = 0.000820375 Jy
! Component: 200  -  total flux cleaned = 0.000830583 Jy
! Total flux subtracted in 200 components = 0.000830583 Jy
! Clean residual min=-0.058121 max=0.070727 Jy/beam
! Clean residual mean=0.000094 rms=0.016505 Jy/beam
! Combined flux in latest and established models = 0.660041 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 68 components and 0.660041 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.641689Jy  sigma=1.887947
! Fit after  self-cal, rms=0.653088Jy  sigma=1.873577
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.653088Jy  sigma=1.873577
! Fit after  self-cal, rms=0.692995Jy  sigma=1.868489
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8244 mas, bmaj=5.951 mas, bpa=5.23 degrees
! Estimated noise=10.6428 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.428051 Jy
! Component: 100  -  total flux cleaned = 0.563866 Jy
! Component: 150  -  total flux cleaned = 0.612534 Jy
! Component: 200  -  total flux cleaned = 0.630527 Jy
! Total flux subtracted in 200 components = 0.630527 Jy
! Clean residual min=-0.109656 max=0.106663 Jy/beam
! Clean residual mean=-0.000137 rms=0.026301 Jy/beam
! Combined flux in latest and established models = 0.630527 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.630527 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.066 mas, bmaj=7.328 mas, bpa=4.194 degrees
! Estimated noise=8.29107 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0260017 Jy
! Component: 100  -  total flux cleaned = 0.0300399 Jy
! Component: 150  -  total flux cleaned = 0.0334194 Jy
! Component: 200  -  total flux cleaned = 0.0370745 Jy
! Total flux subtracted in 200 components = 0.0370745 Jy
! Clean residual min=-0.066326 max=0.073462 Jy/beam
! Clean residual mean=0.000147 rms=0.018404 Jy/beam
! Combined flux in latest and established models = 0.667601 Jy
! Adding 13 model components to the UV plane model.
! The established model now contains 25 components and 0.667601 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.898 mas, bmaj=12.36 mas, bpa=-4.623 degrees
! Estimated noise=9.34023 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00622233 Jy
! Component: 100  -  total flux cleaned = 0.00620439 Jy
! Component: 150  -  total flux cleaned = 0.00620833 Jy
! Component: 200  -  total flux cleaned = 0.00621712 Jy
! Total flux subtracted in 200 components = 0.00621712 Jy
! Clean residual min=-0.053281 max=0.055621 Jy/beam
! Clean residual mean=0.000371 rms=0.017738 Jy/beam
! Combined flux in latest and established models = 0.673818 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.87974e-06 Jy
! Component: 100  -  total flux cleaned = 1.71581e-05 Jy
! Component: 150  -  total flux cleaned = 2.47444e-05 Jy
! Component: 200  -  total flux cleaned = 3.14306e-05 Jy
! Total flux subtracted in 200 components = 3.14306e-05 Jy
! Clean residual min=-0.052554 max=0.054477 Jy/beam
! Clean residual mean=0.000382 rms=0.017324 Jy/beam
! Combined flux in latest and established models = 0.67385 Jy
! Adding 5 model components to the UV plane model.
! The established model now contains 27 components and 0.67385 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.066 mas, bmaj=7.328 mas, bpa=4.194 degrees
! Estimated noise=8.29107 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.31534e-05 Jy
! Component: 100  -  total flux cleaned = 0.000128902 Jy
! Component: 150  -  total flux cleaned = 0.000102259 Jy
! Component: 200  -  total flux cleaned = 0.00148473 Jy
! Total flux subtracted in 200 components = 0.00148473 Jy
! Clean residual min=-0.063284 max=0.072269 Jy/beam
! Clean residual mean=0.000254 rms=0.018032 Jy/beam
! Combined flux in latest and established models = 0.675334 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 32 components and 0.675334 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.670457Jy  sigma=1.972304
! Fit after  self-cal, rms=0.692636Jy  sigma=1.912199
wmodel J0051-4226_X_map.mod
! Writing 32 model components to file: J0051-4226_X_map.mod
wobs   J0051-4226_X_uvs.fits
! Writing UV FITS file: J0051-4226_X_uvs.fits
wwins  J0051-4226_X_map.win
! wwins: Wrote 1 windows to J0051-4226_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.032214 Jy
! Component: 100  -  total flux cleaned = 0.0524473 Jy
! Component: 150  -  total flux cleaned = 0.0585602 Jy
! Component: 200  -  total flux cleaned = 0.064263 Jy
! Component: 250  -  total flux cleaned = 0.0669309 Jy
! Component: 300  -  total flux cleaned = 0.0686161 Jy
! Component: 350  -  total flux cleaned = 0.069399 Jy
! Component: 400  -  total flux cleaned = 0.0709066 Jy
! Component: 450  -  total flux cleaned = 0.070909 Jy
! Component: 500  -  total flux cleaned = 0.0723059 Jy
! Component: 550  -  total flux cleaned = 0.0723106 Jy
! Component: 600  -  total flux cleaned = 0.0729536 Jy
! Component: 650  -  total flux cleaned = 0.0723252 Jy
! Component: 700  -  total flux cleaned = 0.0717317 Jy
! Component: 750  -  total flux cleaned = 0.0740221 Jy
! Component: 800  -  total flux cleaned = 0.0762436 Jy
! Component: 850  -  total flux cleaned = 0.0795101 Jy
! Component: 900  -  total flux cleaned = 0.0816367 Jy
! Component: 950  -  total flux cleaned = 0.0842392 Jy
! Component: 1000  -  total flux cleaned = 0.0862836 Jy
! Component: 1050  -  total flux cleaned = 0.0892863 Jy
! Component: 1100  -  total flux cleaned = 0.0912478 Jy
! Component: 1150  -  total flux cleaned = 0.0922045 Jy
! Component: 1200  -  total flux cleaned = 0.0922009 Jy
! Component: 1250  -  total flux cleaned = 0.0926675 Jy
! Component: 1300  -  total flux cleaned = 0.0935752 Jy
! Component: 1350  -  total flux cleaned = 0.0931221 Jy
! Component: 1400  -  total flux cleaned = 0.0926783 Jy
! Component: 1450  -  total flux cleaned = 0.0922432 Jy
! Component: 1500  -  total flux cleaned = 0.0922479 Jy
! Component: 1550  -  total flux cleaned = 0.0935235 Jy
! Component: 1600  -  total flux cleaned = 0.0926862 Jy
! Component: 1650  -  total flux cleaned = 0.0922745 Jy
! Component: 1700  -  total flux cleaned = 0.0906567 Jy
! Component: 1750  -  total flux cleaned = 0.0910631 Jy
! Component: 1800  -  total flux cleaned = 0.0902679 Jy
! Component: 1850  -  total flux cleaned = 0.0898759 Jy
! Component: 1900  -  total flux cleaned = 0.0890935 Jy
! Component: 1950  -  total flux cleaned = 0.0887028 Jy
! Component: 2000  -  total flux cleaned = 0.0890845 Jy
! Component: 2050  -  total flux cleaned = 0.0894656 Jy
! Component: 2100  -  total flux cleaned = 0.0894671 Jy
! Component: 2150  -  total flux cleaned = 0.090592 Jy
! Component: 2200  -  total flux cleaned = 0.0909623 Jy
! Component: 2250  -  total flux cleaned = 0.0909646 Jy
! Component: 2300  -  total flux cleaned = 0.0913354 Jy
! Component: 2350  -  total flux cleaned = 0.0928052 Jy
! Component: 2400  -  total flux cleaned = 0.0935378 Jy
! Component: 2450  -  total flux cleaned = 0.093902 Jy
! Component: 2500  -  total flux cleaned = 0.0953457 Jy
! Component: 2550  -  total flux cleaned = 0.0957024 Jy
! Component: 2600  -  total flux cleaned = 0.0967746 Jy
! Component: 2650  -  total flux cleaned = 0.0978443 Jy
! Component: 2700  -  total flux cleaned = 0.0999789 Jy
! Component: 2750  -  total flux cleaned = 0.103533 Jy
! Component: 2800  -  total flux cleaned = 0.106372 Jy
! Component: 2850  -  total flux cleaned = 0.108499 Jy
! Component: 2900  -  total flux cleaned = 0.111338 Jy
! Component: 2950  -  total flux cleaned = 0.11453 Jy
! Component: 3000  -  total flux cleaned = 0.116302 Jy
! Component: 3050  -  total flux cleaned = 0.119493 Jy
! Component: 3100  -  total flux cleaned = 0.121972 Jy
! Component: 3150  -  total flux cleaned = 0.124454 Jy
! Component: 3200  -  total flux cleaned = 0.12694 Jy
! Component: 3250  -  total flux cleaned = 0.130144 Jy
! Component: 3300  -  total flux cleaned = 0.131927 Jy
! Component: 3350  -  total flux cleaned = 0.133356 Jy
! Component: 3400  -  total flux cleaned = 0.135142 Jy
! Component: 3450  -  total flux cleaned = 0.136937 Jy
! Component: 3500  -  total flux cleaned = 0.138378 Jy
! Component: 3550  -  total flux cleaned = 0.140183 Jy
! Component: 3600  -  total flux cleaned = 0.142358 Jy
! Component: 3650  -  total flux cleaned = 0.143809 Jy
! Component: 3700  -  total flux cleaned = 0.145633 Jy
! Component: 3750  -  total flux cleaned = 0.147465 Jy
! Component: 3800  -  total flux cleaned = 0.148936 Jy
! Component: 3850  -  total flux cleaned = 0.150046 Jy
! Component: 3900  -  total flux cleaned = 0.15079 Jy
! Component: 3950  -  total flux cleaned = 0.151906 Jy
! Component: 4000  -  total flux cleaned = 0.153781 Jy
! Component: 4050  -  total flux cleaned = 0.155667 Jy
! Total flux subtracted in 4096 components = 0.156802 Jy
! Clean residual min=-0.021786 max=0.020793 Jy/beam
! Clean residual mean=0.000502 rms=0.006591 Jy/beam
! Combined flux in latest and established models = 0.832137 Jy
keep
! Adding 191 model components to the UV plane model.
! The established model now contains 223 components and 0.832137 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv119_uvs/J0051-4226_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.066 x 7.328 at 4.194 degrees (North through East)
! Clean map  min=-0.043743  max=0.47412 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv119_uvs/J0051-4226_X_map.fits
wmodel /scr/pima/rv119_uvs/J0051-4226_X_map.mod
! Writing 223 model components to file: /scr/pima/rv119_uvs/J0051-4226_X_map.mod
wobs   /scr/pima/rv119_uvs/J0051-4226_X_uvs.fits
! Writing UV FITS file: /scr/pima/rv119_uvs/J0051-4226_X_uvs.fits
wwins  /scr/pima/rv119_uvs/J0051-4226_X_map.win
! wwins: Wrote 2 windows to /scr/pima/rv119_uvs/J0051-4226_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.474122 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.0067282 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -4.25726 4.25726 8.51452 17.029 34.0581 68.1162
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0201 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.474 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  70.467 
quit
! Quitting program
! Log file /scr/pima/rv119_uvs/J0051-4226_X_dfm.log closed on Sun Dec 17 11:31:45 2017