! Started logfile: difmap.log_33 on Thu Dec 14 11:24:45 2017 ![@/tmp/difmap__11004.1] ! Obeying initialization file: /tmp/difmap__11004.1 ![@/home/lpetrov/config/difmap.cnf] device /XW ! Attempting to open device: '/XW' vflags="fb3" integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 800000 float soltime2 soltime2 = 15 float soltime3 soltime3 = 1 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float taper_size taper_size = 70. integer field_size field_size = 1024 float field_cell field_cell = 0.1 float old_peak float new_peak float flux_cutoff ![Exited script file: /home/lpetrov/config/difmap.cnf] ![@/tmp/difmap__11004.2] ![Exited script file: /tmp/difmap__11004.2] obs J0922-3959_X_uva.fits ! Reading UV FITS file: J0922-3959_X_uva.fits ! AN table 1: 19 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.454887 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0922-3959 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 968 visibilities. ![Exited script file: /tmp/difmap__11004.1] sele I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 field_size=1024 field_cell=0.1 taper_size = 70. mapsize field_size,field_cell ! Map grid = 1024x1024 pixels with 0.100x0.100 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 86 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 86 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 86 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 86 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.341593Jy sigma=15.881848 ! Fit after self-cal, rms=0.296808Jy sigma=2.925632 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. radplot ! Using default options string "m1" ! Move the cursor into the plot window and press 'H' for help uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clrmod true,true clean 200, 0.02 ! Inverting map and beam ! Estimated beam: bmin=0.6523 mas, bmaj=2.22 mas, bpa=6.1 degrees ! Estimated noise=3.1858 mJy/beam. ! clean: niter=200 gain=0.02 cutoff=0 ! Component: 050 - total flux cleaned = 0.510689 Jy ! Component: 100 - total flux cleaned = 0.71967 Jy ! Component: 150 - total flux cleaned = 0.823379 Jy ! Component: 200 - total flux cleaned = 0.88809 Jy ! Total flux subtracted in 200 components = 0.88809 Jy ! Clean residual min=-0.033240 max=0.054034 Jy/beam ! Clean residual mean=0.000067 rms=0.011002 Jy/beam ! Combined flux in latest and established models = 0.888089 Jy mapl map,true ! ! Move the cursor into the plot window and press 'H' for help ! Note that 2 components lie outside the plot. clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.909724Jy sigma=11.309178 ! Fit after self-cal, rms=0.909724Jy sigma=11.309178 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=0.6523 mas, bmaj=2.22 mas, bpa=6.1 degrees ! Estimated noise=3.1858 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.317238 Jy ! Component: 100 - total flux cleaned = 0.509169 Jy ! Component: 150 - total flux cleaned = 0.628776 Jy ! Component: 200 - total flux cleaned = 0.708677 Jy ! Component: 250 - total flux cleaned = 0.763686 Jy ! Component: 300 - total flux cleaned = 0.801634 Jy ! Component: 350 - total flux cleaned = 0.827812 Jy ! Component: 400 - total flux cleaned = 0.845871 Jy ! Component: 450 - total flux cleaned = 0.858329 Jy ! Component: 500 - total flux cleaned = 0.866923 Jy ! Component: 550 - total flux cleaned = 0.869564 Jy ! Component: 600 - total flux cleaned = 0.870057 Jy ! Component: 650 - total flux cleaned = 0.870544 Jy ! Component: 700 - total flux cleaned = 0.871024 Jy ! Component: 750 - total flux cleaned = 0.871261 Jy ! Component: 800 - total flux cleaned = 0.871732 Jy ! Total flux subtracted in 800 components = 0.871732 Jy ! Clean residual min=-0.045257 max=0.111032 Jy/beam ! Clean residual mean=0.000087 rms=0.013390 Jy/beam ! Combined flux in latest and established models = 0.871733 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.871733 Jy ! Inverting map and beam ! Estimated beam: bmin=0.876 mas, bmaj=2.983 mas, bpa=8.263 degrees ! Estimated noise=2.35366 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.041107 Jy ! Component: 100 - total flux cleaned = 0.0675279 Jy ! Component: 150 - total flux cleaned = 0.0848042 Jy ! Component: 200 - total flux cleaned = 0.0963233 Jy ! Component: 250 - total flux cleaned = 0.104175 Jy ! Component: 300 - total flux cleaned = 0.109584 Jy ! Component: 350 - total flux cleaned = 0.111244 Jy ! Component: 400 - total flux cleaned = 0.111553 Jy ! Component: 450 - total flux cleaned = 0.111708 Jy ! Component: 500 - total flux cleaned = 0.111861 Jy ! Component: 550 - total flux cleaned = 0.11217 Jy ! Component: 600 - total flux cleaned = 0.112323 Jy ! Component: 650 - total flux cleaned = 0.112628 Jy ! Component: 700 - total flux cleaned = 0.11278 Jy ! Component: 750 - total flux cleaned = 0.112931 Jy ! Component: 800 - total flux cleaned = 0.113232 Jy ! Component: 850 - total flux cleaned = 0.113383 Jy ! Component: 900 - total flux cleaned = 0.113681 Jy ! Component: 950 - total flux cleaned = 0.113828 Jy ! Component: 1000 - total flux cleaned = 0.113977 Jy ! Component: 1050 - total flux cleaned = 0.114272 Jy ! Component: 1100 - total flux cleaned = 0.11442 Jy ! Component: 1150 - total flux cleaned = 0.114566 Jy ! Component: 1200 - total flux cleaned = 0.114857 Jy ! Total flux subtracted in 1200 components = 0.114857 Jy ! Clean residual min=-0.045395 max=0.107356 Jy/beam ! Clean residual mean=-0.000078 rms=0.014689 Jy/beam ! Combined flux in latest and established models = 0.98659 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help uncalib selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 9 components and 0.98659 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216336Jy sigma=2.294356 ! Fit after self-cal, rms=0.211753Jy sigma=2.240270 selfcal true,true,1.e6 ! Performing amp+phase self-cal over 1e+06 minute time intervals ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.211753Jy sigma=2.240270 ! Fit after self-cal, rms=0.140106Jy sigma=1.020965 clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.939388Jy sigma=11.371485 ! Fit after self-cal, rms=0.939388Jy sigma=11.371485 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=0.6874 mas, bmaj=2.372 mas, bpa=9.245 degrees ! Estimated noise=3.69438 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.360858 Jy ! Component: 100 - total flux cleaned = 0.579659 Jy ! Component: 150 - total flux cleaned = 0.713632 Jy ! Component: 200 - total flux cleaned = 0.796022 Jy ! Component: 250 - total flux cleaned = 0.848619 Jy ! Component: 300 - total flux cleaned = 0.883203 Jy ! Component: 350 - total flux cleaned = 0.906411 Jy ! Component: 400 - total flux cleaned = 0.921987 Jy ! Component: 450 - total flux cleaned = 0.932441 Jy ! Component: 500 - total flux cleaned = 0.939456 Jy ! Component: 550 - total flux cleaned = 0.944165 Jy ! Component: 600 - total flux cleaned = 0.946562 Jy ! Component: 650 - total flux cleaned = 0.946675 Jy ! Component: 700 - total flux cleaned = 0.946788 Jy ! Component: 750 - total flux cleaned = 0.946899 Jy ! Component: 800 - total flux cleaned = 0.947008 Jy ! Total flux subtracted in 800 components = 0.947008 Jy ! Clean residual min=-0.023857 max=0.048719 Jy/beam ! Clean residual mean=-0.000010 rms=0.005872 Jy/beam ! Combined flux in latest and established models = 0.947008 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.947008 Jy ! Inverting map and beam ! Estimated beam: bmin=1.011 mas, bmaj=3.867 mas, bpa=12.6 degrees ! Estimated noise=2.38287 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00968284 Jy ! Component: 100 - total flux cleaned = 0.0159883 Jy ! Component: 150 - total flux cleaned = 0.0202455 Jy ! Component: 200 - total flux cleaned = 0.0231198 Jy ! Component: 250 - total flux cleaned = 0.0250604 Jy ! Component: 300 - total flux cleaned = 0.0262835 Jy ! Component: 350 - total flux cleaned = 0.0263715 Jy ! Component: 400 - total flux cleaned = 0.0264152 Jy ! Component: 450 - total flux cleaned = 0.0265012 Jy ! Component: 500 - total flux cleaned = 0.0265442 Jy ! Component: 550 - total flux cleaned = 0.026629 Jy ! Component: 600 - total flux cleaned = 0.0267129 Jy ! Component: 650 - total flux cleaned = 0.0267542 Jy ! Component: 700 - total flux cleaned = 0.0268363 Jy ! Component: 750 - total flux cleaned = 0.0268772 Jy ! Component: 800 - total flux cleaned = 0.0269582 Jy ! Component: 850 - total flux cleaned = 0.0269984 Jy ! Component: 900 - total flux cleaned = 0.0270781 Jy ! Component: 950 - total flux cleaned = 0.0271564 Jy ! Component: 1000 - total flux cleaned = 0.0271951 Jy ! Component: 1050 - total flux cleaned = 0.0272721 Jy ! Component: 1100 - total flux cleaned = 0.0273109 Jy ! Component: 1150 - total flux cleaned = 0.0273494 Jy ! Component: 1200 - total flux cleaned = 0.0273873 Jy ! Total flux subtracted in 1200 components = 0.0273873 Jy ! Clean residual min=-0.010323 max=0.021341 Jy/beam ! Clean residual mean=-0.000043 rms=0.003337 Jy/beam ! Combined flux in latest and established models = 0.974396 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help proj ! Adding 4 model components to the UV plane model. ! The established model now contains 11 components and 0.974396 Jy ! Using default options string "m3" ! Move the cursor into the plot window and press 'H' for help ! Applying 2 buffered edits. clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.940017Jy sigma=11.387402 ! Fit after self-cal, rms=0.940017Jy sigma=11.387402 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=0.6875 mas, bmaj=2.373 mas, bpa=9.245 degrees ! Estimated noise=3.71862 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.361333 Jy ! Component: 100 - total flux cleaned = 0.580299 Jy ! Component: 150 - total flux cleaned = 0.714305 Jy ! Component: 200 - total flux cleaned = 0.797333 Jy ! Component: 250 - total flux cleaned = 0.852544 Jy ! Component: 300 - total flux cleaned = 0.890252 Jy ! Component: 350 - total flux cleaned = 0.916383 Jy ! Component: 400 - total flux cleaned = 0.934965 Jy ! Component: 450 - total flux cleaned = 0.948421 Jy ! Component: 500 - total flux cleaned = 0.958379 Jy ! Component: 550 - total flux cleaned = 0.966167 Jy ! Component: 600 - total flux cleaned = 0.972387 Jy ! Component: 650 - total flux cleaned = 0.977399 Jy ! Component: 700 - total flux cleaned = 0.981149 Jy ! Component: 750 - total flux cleaned = 0.981992 Jy ! Component: 800 - total flux cleaned = 0.982648 Jy ! Total flux subtracted in 800 components = 0.982648 Jy ! Clean residual min=-0.018814 max=0.017349 Jy/beam ! Clean residual mean=0.000011 rms=0.003967 Jy/beam ! Combined flux in latest and established models = 0.982648 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.982648 Jy ! Inverting map and beam ! Estimated beam: bmin=1.012 mas, bmaj=3.877 mas, bpa=12.65 degrees ! Estimated noise=2.38377 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00237857 Jy ! Component: 100 - total flux cleaned = 0.00400193 Jy ! Component: 150 - total flux cleaned = 0.00495005 Jy ! Component: 200 - total flux cleaned = 0.00503073 Jy ! Component: 250 - total flux cleaned = 0.0051453 Jy ! Component: 300 - total flux cleaned = 0.00521811 Jy ! Component: 350 - total flux cleaned = 0.0053211 Jy ! Component: 400 - total flux cleaned = 0.00538576 Jy ! Component: 450 - total flux cleaned = 0.00544808 Jy ! Component: 500 - total flux cleaned = 0.00550716 Jy ! Component: 550 - total flux cleaned = 0.00553558 Jy ! Component: 600 - total flux cleaned = 0.00556319 Jy ! Component: 650 - total flux cleaned = 0.00556302 Jy ! Component: 700 - total flux cleaned = 0.00556293 Jy ! Component: 750 - total flux cleaned = 0.00558839 Jy ! Component: 800 - total flux cleaned = 0.00558757 Jy ! Component: 850 - total flux cleaned = 0.00556261 Jy ! Component: 900 - total flux cleaned = 0.0055633 Jy ! Component: 950 - total flux cleaned = 0.00556282 Jy ! Component: 1000 - total flux cleaned = 0.00556156 Jy ! Component: 1050 - total flux cleaned = 0.00556235 Jy ! Component: 1100 - total flux cleaned = 0.00556218 Jy ! Component: 1150 - total flux cleaned = 0.00556205 Jy ! Component: 1200 - total flux cleaned = 0.00556201 Jy ! Total flux subtracted in 1200 components = 0.00556201 Jy ! Clean residual min=-0.007568 max=0.009566 Jy/beam ! Clean residual mean=-0.000004 rms=0.002515 Jy/beam ! Combined flux in latest and established models = 0.98821 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help uncalib selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 44 components and 0.98821 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126064Jy sigma=0.949778 ! Fit after self-cal, rms=0.125982Jy sigma=0.944962 selfcal true,true,10. ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125982Jy sigma=0.944962 ! Fit after self-cal, rms=0.120003Jy sigma=0.864822 clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.936752Jy sigma=11.387402 ! Fit after self-cal, rms=0.936752Jy sigma=11.387402 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Inverting map and beam ! Estimated beam: bmin=0.687 mas, bmaj=2.373 mas, bpa=9.195 degrees ! Estimated noise=3.70835 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.360263 Jy ! Component: 100 - total flux cleaned = 0.578803 Jy ! Component: 150 - total flux cleaned = 0.712642 Jy ! Component: 200 - total flux cleaned = 0.795568 Jy ! Component: 250 - total flux cleaned = 0.850771 Jy ! Component: 300 - total flux cleaned = 0.888457 Jy ! Component: 350 - total flux cleaned = 0.914586 Jy ! Component: 400 - total flux cleaned = 0.933057 Jy ! Component: 450 - total flux cleaned = 0.946455 Jy ! Component: 500 - total flux cleaned = 0.95646 Jy ! Component: 550 - total flux cleaned = 0.964302 Jy ! Component: 600 - total flux cleaned = 0.970508 Jy ! Component: 650 - total flux cleaned = 0.975628 Jy ! Component: 700 - total flux cleaned = 0.979948 Jy ! Component: 750 - total flux cleaned = 0.983593 Jy ! Component: 800 - total flux cleaned = 0.986668 Jy ! Component: 850 - total flux cleaned = 0.987862 Jy ! Component: 900 - total flux cleaned = 0.98847 Jy ! Component: 950 - total flux cleaned = 0.988663 Jy ! Component: 1000 - total flux cleaned = 0.988853 Jy ! Component: 1050 - total flux cleaned = 0.989129 Jy ! Component: 1100 - total flux cleaned = 0.989306 Jy ! Component: 1150 - total flux cleaned = 0.989564 Jy ! Component: 1200 - total flux cleaned = 0.989646 Jy ! Total flux subtracted in 1200 components = 0.989646 Jy ! Clean residual min=-0.012706 max=0.014363 Jy/beam ! Clean residual mean=-0.000007 rms=0.003305 Jy/beam ! Combined flux in latest and established models = 0.989646 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 2000, 0.01 ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.989646 Jy ! Inverting map and beam ! Estimated beam: bmin=1.009 mas, bmaj=3.858 mas, bpa=12.61 degrees ! Estimated noise=2.38029 mJy/beam. ! clean: niter=2000 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000298868 Jy ! Component: 100 - total flux cleaned = 0.000334886 Jy ! Component: 150 - total flux cleaned = 0.000335934 Jy ! Component: 200 - total flux cleaned = 0.000366618 Jy ! Component: 250 - total flux cleaned = 0.000366279 Jy ! Component: 300 - total flux cleaned = 0.000419092 Jy ! Component: 350 - total flux cleaned = 0.00041989 Jy ! Component: 400 - total flux cleaned = 0.000419479 Jy ! Component: 450 - total flux cleaned = 0.000418228 Jy ! Component: 500 - total flux cleaned = 0.000396098 Jy ! Component: 550 - total flux cleaned = 0.000396948 Jy ! Component: 600 - total flux cleaned = 0.00039738 Jy ! Component: 650 - total flux cleaned = 0.000398486 Jy ! Component: 700 - total flux cleaned = 0.000418485 Jy ! Component: 750 - total flux cleaned = 0.000418487 Jy ! Component: 800 - total flux cleaned = 0.000419303 Jy ! Component: 850 - total flux cleaned = 0.000419187 Jy ! Component: 900 - total flux cleaned = 0.000437637 Jy ! Component: 950 - total flux cleaned = 0.000455799 Jy ! Component: 1000 - total flux cleaned = 0.000455704 Jy ! Component: 1050 - total flux cleaned = 0.000473025 Jy ! Component: 1100 - total flux cleaned = 0.000473127 Jy ! Component: 1150 - total flux cleaned = 0.000490021 Jy ! Component: 1200 - total flux cleaned = 0.000490136 Jy ! Component: 1250 - total flux cleaned = 0.000506533 Jy ! Component: 1300 - total flux cleaned = 0.000507326 Jy ! Component: 1350 - total flux cleaned = 0.000507486 Jy ! Component: 1400 - total flux cleaned = 0.000507203 Jy ! Component: 1450 - total flux cleaned = 0.000506677 Jy ! Component: 1500 - total flux cleaned = 0.000506266 Jy ! Component: 1550 - total flux cleaned = 0.000505709 Jy ! Component: 1600 - total flux cleaned = 0.000505231 Jy ! Component: 1650 - total flux cleaned = 0.000505174 Jy ! Component: 1700 - total flux cleaned = 0.00050528 Jy ! Component: 1750 - total flux cleaned = 0.000505663 Jy ! Component: 1800 - total flux cleaned = 0.000506156 Jy ! Component: 1850 - total flux cleaned = 0.000506676 Jy ! Component: 1900 - total flux cleaned = 0.00050731 Jy ! Component: 1950 - total flux cleaned = 0.000507943 Jy ! Component: 2000 - total flux cleaned = 0.00050856 Jy ! Total flux subtracted in 2000 components = 0.00050856 Jy ! Clean residual min=-0.006276 max=0.008489 Jy/beam ! Clean residual mean=-0.000064 rms=0.002059 Jy/beam ! Combined flux in latest and established models = 0.990154 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.936752Jy sigma=11.387402 ! Fit after self-cal, rms=0.936752Jy sigma=11.387402 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Inverting map and beam ! Estimated beam: bmin=0.687 mas, bmaj=2.373 mas, bpa=9.195 degrees ! Estimated noise=3.70835 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.360263 Jy ! Component: 100 - total flux cleaned = 0.578803 Jy ! Component: 150 - total flux cleaned = 0.712642 Jy ! Component: 200 - total flux cleaned = 0.795568 Jy ! Component: 250 - total flux cleaned = 0.850771 Jy ! Component: 300 - total flux cleaned = 0.888457 Jy ! Component: 350 - total flux cleaned = 0.914586 Jy ! Component: 400 - total flux cleaned = 0.933056 Jy ! Component: 450 - total flux cleaned = 0.946461 Jy ! Component: 500 - total flux cleaned = 0.956299 Jy ! Component: 550 - total flux cleaned = 0.963664 Jy ! Component: 600 - total flux cleaned = 0.969227 Jy ! Component: 650 - total flux cleaned = 0.973436 Jy ! Component: 700 - total flux cleaned = 0.976645 Jy ! Component: 750 - total flux cleaned = 0.979109 Jy ! Component: 800 - total flux cleaned = 0.980455 Jy ! Component: 850 - total flux cleaned = 0.980809 Jy ! Component: 900 - total flux cleaned = 0.981012 Jy ! Component: 950 - total flux cleaned = 0.981077 Jy ! Component: 1000 - total flux cleaned = 0.981077 Jy ! Component: 1050 - total flux cleaned = 0.981077 Jy ! Component: 1100 - total flux cleaned = 0.981079 Jy ! Component: 1150 - total flux cleaned = 0.98114 Jy ! Component: 1200 - total flux cleaned = 0.981139 Jy ! Total flux subtracted in 1200 components = 0.981139 Jy ! Clean residual min=-0.014473 max=0.014812 Jy/beam ! Clean residual mean=-0.000008 rms=0.003462 Jy/beam ! Combined flux in latest and established models = 0.981139 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 2000, 0.01 ! Adding 43 model components to the UV plane model. ! The established model now contains 43 components and 0.981139 Jy ! Inverting map and beam ! Estimated beam: bmin=1.009 mas, bmaj=3.858 mas, bpa=12.61 degrees ! Estimated noise=2.38029 mJy/beam. ! clean: niter=2000 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00252555 Jy ! Component: 100 - total flux cleaned = 0.00420926 Jy ! Component: 150 - total flux cleaned = 0.00493626 Jy ! Component: 200 - total flux cleaned = 0.00497578 Jy ! Component: 250 - total flux cleaned = 0.00509079 Jy ! Component: 300 - total flux cleaned = 0.00516378 Jy ! Component: 350 - total flux cleaned = 0.00526927 Jy ! Component: 400 - total flux cleaned = 0.00533633 Jy ! Component: 450 - total flux cleaned = 0.00543303 Jy ! Component: 500 - total flux cleaned = 0.00549462 Jy ! Component: 550 - total flux cleaned = 0.00558305 Jy ! Component: 600 - total flux cleaned = 0.00566692 Jy ! Component: 650 - total flux cleaned = 0.00572031 Jy ! Component: 700 - total flux cleaned = 0.00579722 Jy ! Component: 750 - total flux cleaned = 0.0058461 Jy ! Component: 800 - total flux cleaned = 0.0059166 Jy ! Component: 850 - total flux cleaned = 0.00596147 Jy ! Component: 900 - total flux cleaned = 0.00602596 Jy ! Component: 950 - total flux cleaned = 0.00606712 Jy ! Component: 1000 - total flux cleaned = 0.00610684 Jy ! Component: 1050 - total flux cleaned = 0.00614531 Jy ! Component: 1100 - total flux cleaned = 0.00618259 Jy ! Component: 1150 - total flux cleaned = 0.00621847 Jy ! Component: 1200 - total flux cleaned = 0.00625319 Jy ! Component: 1250 - total flux cleaned = 0.00628725 Jy ! Component: 1300 - total flux cleaned = 0.00630393 Jy ! Component: 1350 - total flux cleaned = 0.00633612 Jy ! Component: 1400 - total flux cleaned = 0.00635184 Jy ! Component: 1450 - total flux cleaned = 0.00638266 Jy ! Component: 1500 - total flux cleaned = 0.0064123 Jy ! Component: 1550 - total flux cleaned = 0.00642679 Jy ! Component: 1600 - total flux cleaned = 0.00645486 Jy ! Component: 1650 - total flux cleaned = 0.00646851 Jy ! Component: 1700 - total flux cleaned = 0.00649513 Jy ! Component: 1750 - total flux cleaned = 0.00650811 Jy ! Component: 1800 - total flux cleaned = 0.00653339 Jy ! Component: 1850 - total flux cleaned = 0.00654588 Jy ! Component: 1900 - total flux cleaned = 0.00656993 Jy ! Component: 1950 - total flux cleaned = 0.00658158 Jy ! Component: 2000 - total flux cleaned = 0.00660427 Jy ! Total flux subtracted in 2000 components = 0.00660427 Jy ! Clean residual min=-0.006524 max=0.008307 Jy/beam ! Clean residual mean=-0.000067 rms=0.002069 Jy/beam ! Combined flux in latest and established models = 0.987743 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help uncalib selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 49 components and 0.987743 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120225Jy sigma=0.866436 ! Fit after self-cal, rms=0.120224Jy sigma=0.865691 selfcal true,true,10. ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120224Jy sigma=0.865691 ! Fit after self-cal, rms=0.119114Jy sigma=0.864564 proj ! Using default options string "m3" ! Move the cursor into the plot window and press 'H' for help ! Applying 1 buffered edits. uncalib selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118489Jy sigma=0.861957 ! Fit after self-cal, rms=0.118528Jy sigma=0.861909 selfcal true,true,10. ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118528Jy sigma=0.861909 ! Fit after self-cal, rms=0.118782Jy sigma=0.861500 levs=0.75,1.5,3.0,6.0,12,25.0,50.0 mapcol color ! Mapplot colormap: rainbow, contrast: 1 brightness: 0.5. mapl cln ! Inverting map and beam ! Estimated beam: bmin=1.008 mas, bmaj=3.822 mas, bpa=12.52 degrees ! Estimated noise=2.38164 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.008 x 3.822 at 12.52 degrees (North through East) ! Clean map min=-0.0066025 max=0.94903 Jy/beam ! ! Move the cursor into the plot window and press 'H' for help mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. uncalib selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118782Jy sigma=0.861500 ! Fit after self-cal, rms=0.118796Jy sigma=0.861496 selfcal true,true,10. ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118796Jy sigma=0.861496 ! Fit after self-cal, rms=0.118778Jy sigma=0.861447 x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map and beam ! Estimated beam: bmin=1.008 mas, bmaj=3.822 mas, bpa=12.52 degrees ! Estimated noise=2.38163 mJy/beam. ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00357695 Jy ! Component: 100 - total flux cleaned = 0.00431183 Jy ! Component: 150 - total flux cleaned = 0.0055774 Jy ! Component: 200 - total flux cleaned = 0.00655906 Jy ! Component: 250 - total flux cleaned = 0.00749865 Jy ! Component: 300 - total flux cleaned = 0.00830843 Jy ! Component: 350 - total flux cleaned = 0.00918252 Jy ! Component: 400 - total flux cleaned = 0.00974344 Jy ! Component: 450 - total flux cleaned = 0.0106502 Jy ! Component: 500 - total flux cleaned = 0.0110024 Jy ! Component: 550 - total flux cleaned = 0.0113452 Jy ! Component: 600 - total flux cleaned = 0.0115949 Jy ! Component: 650 - total flux cleaned = 0.0117567 Jy ! Component: 700 - total flux cleaned = 0.0120744 Jy ! Component: 750 - total flux cleaned = 0.0122324 Jy ! Component: 800 - total flux cleaned = 0.0126136 Jy ! Component: 850 - total flux cleaned = 0.0128358 Jy ! Component: 900 - total flux cleaned = 0.0129064 Jy ! Component: 950 - total flux cleaned = 0.0126917 Jy ! Component: 1000 - total flux cleaned = 0.0128335 Jy ! Component: 1050 - total flux cleaned = 0.0128347 Jy ! Component: 1100 - total flux cleaned = 0.01297 Jy ! Component: 1150 - total flux cleaned = 0.0129041 Jy ! Component: 1200 - total flux cleaned = 0.0128404 Jy ! Component: 1250 - total flux cleaned = 0.0129046 Jy ! Component: 1300 - total flux cleaned = 0.0127802 Jy ! Component: 1350 - total flux cleaned = 0.0129032 Jy ! Component: 1400 - total flux cleaned = 0.0127198 Jy ! Component: 1450 - total flux cleaned = 0.0127199 Jy ! Component: 1500 - total flux cleaned = 0.0126601 Jy ! Component: 1550 - total flux cleaned = 0.0127173 Jy ! Component: 1600 - total flux cleaned = 0.012543 Jy ! Component: 1650 - total flux cleaned = 0.0123162 Jy ! Component: 1700 - total flux cleaned = 0.0124853 Jy ! Component: 1750 - total flux cleaned = 0.0123207 Jy ! Component: 1800 - total flux cleaned = 0.0125396 Jy ! Component: 1850 - total flux cleaned = 0.0125391 Jy ! Component: 1900 - total flux cleaned = 0.0125938 Jy ! Component: 1950 - total flux cleaned = 0.0126471 Jy ! Component: 2000 - total flux cleaned = 0.0127516 Jy ! Component: 2050 - total flux cleaned = 0.0129069 Jy ! Component: 2100 - total flux cleaned = 0.0129057 Jy ! Component: 2150 - total flux cleaned = 0.0127027 Jy ! Component: 2200 - total flux cleaned = 0.0127538 Jy ! Component: 2250 - total flux cleaned = 0.0128532 Jy ! Component: 2300 - total flux cleaned = 0.0128042 Jy ! Component: 2350 - total flux cleaned = 0.0129508 Jy ! Component: 2400 - total flux cleaned = 0.0129506 Jy ! Component: 2450 - total flux cleaned = 0.0130938 Jy ! Component: 2500 - total flux cleaned = 0.0130938 Jy ! Component: 2550 - total flux cleaned = 0.0130941 Jy ! Component: 2600 - total flux cleaned = 0.0131875 Jy ! Component: 2650 - total flux cleaned = 0.0133257 Jy ! Component: 2700 - total flux cleaned = 0.0131882 Jy ! Component: 2750 - total flux cleaned = 0.0131884 Jy ! Component: 2800 - total flux cleaned = 0.013053 Jy ! Component: 2850 - total flux cleaned = 0.0131427 Jy ! Component: 2900 - total flux cleaned = 0.0130985 Jy ! Component: 2950 - total flux cleaned = 0.0130101 Jy ! Component: 3000 - total flux cleaned = 0.0130102 Jy ! Component: 3050 - total flux cleaned = 0.0129669 Jy ! Component: 3100 - total flux cleaned = 0.0130968 Jy ! Component: 3150 - total flux cleaned = 0.0128811 Jy ! Component: 3200 - total flux cleaned = 0.0127951 Jy ! Component: 3250 - total flux cleaned = 0.0127105 Jy ! Component: 3300 - total flux cleaned = 0.0127105 Jy ! Component: 3350 - total flux cleaned = 0.0126259 Jy ! Component: 3400 - total flux cleaned = 0.0126258 Jy ! Component: 3450 - total flux cleaned = 0.0123762 Jy ! Component: 3500 - total flux cleaned = 0.0124589 Jy ! Component: 3550 - total flux cleaned = 0.0124177 Jy ! Component: 3600 - total flux cleaned = 0.0124178 Jy ! Component: 3650 - total flux cleaned = 0.0123773 Jy ! Component: 3700 - total flux cleaned = 0.012337 Jy ! Component: 3750 - total flux cleaned = 0.0123371 Jy ! Component: 3800 - total flux cleaned = 0.012257 Jy ! Component: 3850 - total flux cleaned = 0.0120975 Jy ! Component: 3900 - total flux cleaned = 0.0118994 Jy ! Component: 3950 - total flux cleaned = 0.0119387 Jy ! Component: 4000 - total flux cleaned = 0.0117818 Jy ! Component: 4050 - total flux cleaned = 0.0117037 Jy ! Total flux subtracted in 4096 components = 0.0116259 Jy ! Clean residual min=-0.002266 max=0.002330 Jy/beam ! Clean residual mean=-0.000012 rms=0.000718 Jy/beam ! Combined flux in latest and established models = 0.999369 Jy ! Log file difmap.log_33 closed on Thu Dec 14 11:26:58 2017