! Started logfile: /scr/pima/rv118_uvs/J2359-3133_X_dfm.log on Sun Dec 10 00:12:12 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv118_uvs/J2359-3133_X_uva.fits ! Reading UV FITS file: /scr/pima/rv118_uvs/J2359-3133_X_uva.fits ! AN table 1: 7 integrations on 28 of 28 possible baselines. ! AN table 2: 15 integrations on 1 of 1 possible baselines. ! AN table 3: 36 integrations on 28 of 28 possible baselines. ! AN table 4: 8 integrations on 1 of 1 possible baselines. ! Apparent sampling: 0.614507 visibilities/baseline/integration-bin. ! Found source: J2359-3133 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 3016 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2359-3133_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 126 telescope corrections were flagged in sub-array 3. ! A total of 16 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 126 telescope corrections were flagged in sub-array 3. ! A total of 16 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 126 telescope corrections were flagged in sub-array 3. ! A total of 16 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 126 telescope corrections were flagged in sub-array 3. ! A total of 16 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=1.084110Jy sigma=16.288914 ! Fit after self-cal, rms=0.624153Jy sigma=8.898637 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8854 mas, bmaj=3.466 mas, bpa=-4.767 degrees ! Estimated noise=1.66214 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.274382 Jy ! Component: 100 - total flux cleaned = 0.350063 Jy ! Total flux subtracted in 100 components = 0.350063 Jy ! Clean residual min=-0.013750 max=0.035151 Jy/beam ! Clean residual mean=-0.000011 rms=0.003975 Jy/beam ! Combined flux in latest and established models = 0.350063 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.350063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109446Jy sigma=1.681075 ! Fit after self-cal, rms=0.109407Jy sigma=1.680593 ! Inverting map ! Added new window around map position (-1, -1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.040075 Jy ! Component: 100 - total flux cleaned = 0.0653369 Jy ! Total flux subtracted in 100 components = 0.0653369 Jy ! Clean residual min=-0.010273 max=0.017795 Jy/beam ! Clean residual mean=-0.000005 rms=0.002685 Jy/beam ! Combined flux in latest and established models = 0.4154 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 31 components and 0.4154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085585Jy sigma=1.173941 ! Fit after self-cal, rms=0.085439Jy sigma=1.172287 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.139 mas, bmaj=4.328 mas, bpa=-6.37 degrees ! Estimated noise=0.971793 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0280871 Jy ! Component: 100 - total flux cleaned = 0.041916 Jy ! Component: 150 - total flux cleaned = 0.0498998 Jy ! Component: 200 - total flux cleaned = 0.0546218 Jy ! Total flux subtracted in 200 components = 0.0546218 Jy ! Clean residual min=-0.006829 max=0.010854 Jy/beam ! Clean residual mean=0.000003 rms=0.001818 Jy/beam ! Combined flux in latest and established models = 0.470022 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 74 components and 0.470022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078006Jy sigma=0.992823 ! Fit after self-cal, rms=0.077749Jy sigma=0.986518 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.139 x 4.328 at -6.37 degrees (North through East) ! Clean map min=-0.0071581 max=0.36231 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.97 HN 1.16 KP 0.98 LA 0.97 ! NL 0.96 OV 0.95 PT 1.03 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* HN 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 0.96 KK 0.97 KP 0.98 ! LA 0.99 NL 1.17 OV 0.97 PT 0.99 ! ! Telescope amplitude corrections in sub-array 4: ! KK 0.00* SC 0.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.95 HN 1.26 KP 0.98 LA 0.96 ! NL 0.96 OV 0.98 PT 1.01 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* HN 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 0.96 KK 0.96 KP 0.97 ! LA 1.00 NL 1.17 OV 0.98 PT 1.00 ! ! Telescope amplitude corrections in sub-array 4: ! KK 0.00* SC 0.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.02 HN 1.29 KP 0.94 LA 0.98 ! NL 0.98 OV 0.97 PT 1.03 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* HN 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.06 FD 0.97 KK 1.00 KP 0.99 ! LA 1.00 NL 1.22 OV 0.99 PT 1.00 ! ! Telescope amplitude corrections in sub-array 4: ! KK 0.00* SC 0.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 HN 1.19 KP 0.97 LA 1.01 ! NL 0.94 OV 0.99 PT 1.07 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* HN 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 0.97 KK 0.98 KP 0.99 ! LA 1.01 NL 1.22 OV 0.99 PT 1.00 ! ! Telescope amplitude corrections in sub-array 4: ! KK 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.077749Jy sigma=0.986518 ! Fit after self-cal, rms=0.076165Jy sigma=0.920329 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.135 mas, bmaj=4.324 mas, bpa=-6.337 degrees ! Estimated noise=0.977537 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00232043 Jy ! Component: 100 - total flux cleaned = -0.00231413 Jy ! Component: 150 - total flux cleaned = -0.00241005 Jy ! Component: 200 - total flux cleaned = -0.00249708 Jy ! Total flux subtracted in 200 components = -0.00249708 Jy ! Clean residual min=-0.004245 max=0.004332 Jy/beam ! Clean residual mean=-0.000008 rms=0.001000 Jy/beam ! Combined flux in latest and established models = 0.467525 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 81 components and 0.467525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075784Jy sigma=0.916106 ! Fit after self-cal, rms=0.075813Jy sigma=0.915815 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075813Jy sigma=0.915815 ! Fit after self-cal, rms=0.075255Jy sigma=0.903017 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.137 mas, bmaj=4.335 mas, bpa=-6.234 degrees ! Estimated noise=0.97685 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00116285 Jy ! Component: 100 - total flux cleaned = -0.00140168 Jy ! Component: 150 - total flux cleaned = -0.0015465 Jy ! Component: 200 - total flux cleaned = -0.00174289 Jy ! Total flux subtracted in 200 components = -0.00174289 Jy ! Clean residual min=-0.004055 max=0.003645 Jy/beam ! Clean residual mean=-0.000021 rms=0.000912 Jy/beam ! Combined flux in latest and established models = 0.465782 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 91 components and 0.465782 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075098Jy sigma=0.900569 ! Fit after self-cal, rms=0.075078Jy sigma=0.900436 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000407713 Jy ! Component: 100 - total flux cleaned = -0.000585034 Jy ! Component: 150 - total flux cleaned = -0.000751155 Jy ! Component: 200 - total flux cleaned = -0.000958926 Jy ! Total flux subtracted in 200 components = -0.000958926 Jy ! Clean residual min=-0.003966 max=0.003612 Jy/beam ! Clean residual mean=-0.000022 rms=0.000897 Jy/beam ! Combined flux in latest and established models = 0.464823 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 99 components and 0.464823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075001Jy sigma=0.899066 ! Fit after self-cal, rms=0.074988Jy sigma=0.898994 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074988Jy sigma=0.898994 ! Fit after self-cal, rms=0.074460Jy sigma=0.884591 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.136 mas, bmaj=4.346 mas, bpa=-6.223 degrees ! Estimated noise=0.975824 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000875118 Jy ! Component: 100 - total flux cleaned = -0.000943012 Jy ! Component: 150 - total flux cleaned = -0.0010021 Jy ! Component: 200 - total flux cleaned = -0.00111455 Jy ! Total flux subtracted in 200 components = -0.00111455 Jy ! Clean residual min=-0.003357 max=0.003940 Jy/beam ! Clean residual mean=-0.000003 rms=0.000833 Jy/beam ! Combined flux in latest and established models = 0.463708 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 105 components and 0.463708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074339Jy sigma=0.883051 ! Fit after self-cal, rms=0.074334Jy sigma=0.882941 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (28.6, 24.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113744 Jy ! Component: 100 - total flux cleaned = 0.00113098 Jy ! Component: 150 - total flux cleaned = 0.000980539 Jy ! Component: 200 - total flux cleaned = 0.000978759 Jy ! Total flux subtracted in 200 components = 0.000978759 Jy ! Clean residual min=-0.003032 max=0.003058 Jy/beam ! Clean residual mean=-0.000006 rms=0.000771 Jy/beam ! Combined flux in latest and established models = 0.464687 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 124 components and 0.464687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074029Jy sigma=0.879020 ! Fit after self-cal, rms=0.074028Jy sigma=0.878750 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074028Jy sigma=0.878750 ! Fit after self-cal, rms=0.074021Jy sigma=0.878438 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.647 mas, bmaj=7.092 mas, bpa=10.86 degrees ! Estimated noise=1.03843 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0012666 Jy ! Component: 100 - total flux cleaned = -0.00153543 Jy ! Component: 150 - total flux cleaned = -0.0017945 Jy ! Component: 200 - total flux cleaned = -0.00192581 Jy ! Total flux subtracted in 200 components = -0.00192581 Jy ! Clean residual min=-0.002464 max=0.002437 Jy/beam ! Clean residual mean=-0.000009 rms=0.000696 Jy/beam ! Combined flux in latest and established models = 0.462761 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 135 components and 0.462761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073988Jy sigma=0.877860 ! Fit after self-cal, rms=0.073978Jy sigma=0.877767 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000297589 Jy ! Component: 100 - total flux cleaned = -0.000327981 Jy ! Component: 150 - total flux cleaned = -0.000412858 Jy ! Component: 200 - total flux cleaned = -0.000465635 Jy ! Total flux subtracted in 200 components = -0.000465635 Jy ! Clean residual min=-0.002436 max=0.002379 Jy/beam ! Clean residual mean=-0.000009 rms=0.000687 Jy/beam ! Combined flux in latest and established models = 0.462296 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 148 components and 0.462296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073967Jy sigma=0.877548 ! Fit after self-cal, rms=0.073960Jy sigma=0.877501 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.136 mas, bmaj=4.348 mas, bpa=-6.194 degrees ! Estimated noise=0.974738 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.136 x 4.348 at -6.194 degrees (North through East) ! Clean map min=-0.0027218 max=0.36711 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8837 mas, bmaj=3.495 mas, bpa=-4.472 degrees ! Estimated noise=1.7027 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.27929 Jy ! Component: 100 - total flux cleaned = 0.357445 Jy ! Component: 150 - total flux cleaned = 0.395476 Jy ! Component: 200 - total flux cleaned = 0.417066 Jy ! Total flux subtracted in 200 components = 0.417066 Jy ! Clean residual min=-0.007303 max=0.010914 Jy/beam ! Clean residual mean=-0.000006 rms=0.001809 Jy/beam ! Combined flux in latest and established models = 0.417066 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.417066 Jy ! Inverting map and beam ! Estimated beam: bmin=1.136 mas, bmaj=4.348 mas, bpa=-6.194 degrees ! Estimated noise=0.974738 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0215806 Jy ! Component: 100 - total flux cleaned = 0.0316278 Jy ! Component: 150 - total flux cleaned = 0.0373124 Jy ! Component: 200 - total flux cleaned = 0.0396977 Jy ! Total flux subtracted in 200 components = 0.0396977 Jy ! Clean residual min=-0.003186 max=0.004315 Jy/beam ! Clean residual mean=-0.000016 rms=0.000845 Jy/beam ! Combined flux in latest and established models = 0.456763 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 82 components and 0.456764 Jy ! Inverting map ! Added new window around map position (1.4, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0031495 Jy ! Component: 100 - total flux cleaned = 0.00380375 Jy ! Component: 150 - total flux cleaned = 0.00456514 Jy ! Component: 200 - total flux cleaned = 0.00498921 Jy ! Total flux subtracted in 200 components = 0.00498921 Jy ! Clean residual min=-0.003032 max=0.002856 Jy/beam ! Clean residual mean=-0.000011 rms=0.000748 Jy/beam ! Combined flux in latest and established models = 0.461753 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 100 components and 0.461753 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.647 mas, bmaj=7.092 mas, bpa=10.86 degrees ! Estimated noise=1.03843 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000217785 Jy ! Component: 100 - total flux cleaned = -0.000305831 Jy ! Component: 150 - total flux cleaned = -0.000343113 Jy ! Component: 200 - total flux cleaned = -0.00041435 Jy ! Total flux subtracted in 200 components = -0.00041435 Jy ! Clean residual min=-0.002447 max=0.002235 Jy/beam ! Clean residual mean=-0.000012 rms=0.000688 Jy/beam ! Combined flux in latest and established models = 0.461338 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.86525e-05 Jy ! Component: 100 - total flux cleaned = -9.99746e-05 Jy ! Component: 150 - total flux cleaned = -0.000130263 Jy ! Component: 200 - total flux cleaned = -0.000218388 Jy ! Total flux subtracted in 200 components = -0.000218388 Jy ! Clean residual min=-0.002387 max=0.002202 Jy/beam ! Clean residual mean=-0.000012 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.46112 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 122 components and 0.46112 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.136 mas, bmaj=4.348 mas, bpa=-6.194 degrees ! Estimated noise=0.974738 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000344818 Jy ! Component: 100 - total flux cleaned = 0.000214066 Jy ! Component: 150 - total flux cleaned = 3.2329e-05 Jy ! Component: 200 - total flux cleaned = -2.40792e-05 Jy ! Total flux subtracted in 200 components = -2.40792e-05 Jy ! Clean residual min=-0.002876 max=0.002778 Jy/beam ! Clean residual mean=-0.000009 rms=0.000718 Jy/beam ! Combined flux in latest and established models = 0.461096 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 145 components and 0.461096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073717Jy sigma=0.874885 ! Fit after self-cal, rms=0.073641Jy sigma=0.874416 wmodel J2359-3133_X_map.mod ! Writing 145 model components to file: J2359-3133_X_map.mod wobs J2359-3133_X_uvs.fits ! Writing UV FITS file: J2359-3133_X_uvs.fits wwins J2359-3133_X_map.win ! wwins: Wrote 4 windows to J2359-3133_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000611064 Jy ! Component: 100 - total flux cleaned = -0.000561814 Jy ! Component: 150 - total flux cleaned = -0.000654475 Jy ! Component: 200 - total flux cleaned = -0.000610092 Jy ! Component: 250 - total flux cleaned = -0.000741008 Jy ! Component: 300 - total flux cleaned = -0.000697696 Jy ! Component: 350 - total flux cleaned = -0.000655729 Jy ! Component: 400 - total flux cleaned = -0.00057384 Jy ! Component: 450 - total flux cleaned = -0.000412573 Jy ! Component: 500 - total flux cleaned = -0.000254215 Jy ! Component: 550 - total flux cleaned = -0.000137446 Jy ! Component: 600 - total flux cleaned = -6.07721e-05 Jy ! Component: 650 - total flux cleaned = 5.34916e-05 Jy ! Component: 700 - total flux cleaned = 0.000352843 Jy ! Component: 750 - total flux cleaned = 0.000426454 Jy ! Component: 800 - total flux cleaned = 0.000572793 Jy ! Component: 850 - total flux cleaned = 0.000644743 Jy ! Component: 900 - total flux cleaned = 0.000787456 Jy ! Component: 950 - total flux cleaned = 0.000858019 Jy ! Component: 1000 - total flux cleaned = 0.000893465 Jy ! Component: 1050 - total flux cleaned = 0.00103144 Jy ! Component: 1100 - total flux cleaned = 0.00109956 Jy ! Component: 1150 - total flux cleaned = 0.00116736 Jy ! Component: 1200 - total flux cleaned = 0.00120096 Jy ! Component: 1250 - total flux cleaned = 0.0013668 Jy ! Component: 1300 - total flux cleaned = 0.00146508 Jy ! Component: 1350 - total flux cleaned = 0.00146466 Jy ! Component: 1400 - total flux cleaned = 0.00143277 Jy ! Component: 1450 - total flux cleaned = 0.00149687 Jy ! Component: 1500 - total flux cleaned = 0.0015919 Jy ! Component: 1550 - total flux cleaned = 0.00168569 Jy ! Component: 1600 - total flux cleaned = 0.00171673 Jy ! Component: 1650 - total flux cleaned = 0.00177854 Jy ! Component: 1700 - total flux cleaned = 0.0018094 Jy ! Component: 1750 - total flux cleaned = 0.00196101 Jy ! Component: 1800 - total flux cleaned = 0.00187077 Jy ! Component: 1850 - total flux cleaned = 0.00196054 Jy ! Component: 1900 - total flux cleaned = 0.00196033 Jy ! Component: 1950 - total flux cleaned = 0.00204835 Jy ! Component: 2000 - total flux cleaned = 0.00201906 Jy ! Component: 2050 - total flux cleaned = 0.00201921 Jy ! Component: 2100 - total flux cleaned = 0.00210511 Jy ! Component: 2150 - total flux cleaned = 0.00201984 Jy ! Component: 2200 - total flux cleaned = 0.00207625 Jy ! Component: 2250 - total flux cleaned = 0.00207603 Jy ! Component: 2300 - total flux cleaned = 0.00204853 Jy ! Component: 2350 - total flux cleaned = 0.00207647 Jy ! Component: 2400 - total flux cleaned = 0.00213159 Jy ! Component: 2450 - total flux cleaned = 0.00213126 Jy ! Component: 2500 - total flux cleaned = 0.00210421 Jy ! Component: 2550 - total flux cleaned = 0.00221193 Jy ! Component: 2600 - total flux cleaned = 0.00221186 Jy ! Component: 2650 - total flux cleaned = 0.00215833 Jy ! Component: 2700 - total flux cleaned = 0.00221117 Jy ! Component: 2750 - total flux cleaned = 0.00229011 Jy ! Component: 2800 - total flux cleaned = 0.00236869 Jy ! Component: 2850 - total flux cleaned = 0.00234298 Jy ! Component: 2900 - total flux cleaned = 0.00252363 Jy ! Component: 2950 - total flux cleaned = 0.00247236 Jy ! Component: 3000 - total flux cleaned = 0.00252338 Jy ! Component: 3050 - total flux cleaned = 0.00249818 Jy ! Component: 3100 - total flux cleaned = 0.00267489 Jy ! Component: 3150 - total flux cleaned = 0.00264993 Jy ! Component: 3200 - total flux cleaned = 0.00269996 Jy ! Component: 3250 - total flux cleaned = 0.00270007 Jy ! Component: 3300 - total flux cleaned = 0.00284821 Jy ! Component: 3350 - total flux cleaned = 0.00282351 Jy ! Component: 3400 - total flux cleaned = 0.00294575 Jy ! Component: 3450 - total flux cleaned = 0.00292133 Jy ! Component: 3500 - total flux cleaned = 0.0029698 Jy ! Component: 3550 - total flux cleaned = 0.00299404 Jy ! Component: 3600 - total flux cleaned = 0.00297013 Jy ! Component: 3650 - total flux cleaned = 0.00308937 Jy ! Component: 3700 - total flux cleaned = 0.00313674 Jy ! Component: 3750 - total flux cleaned = 0.00316049 Jy ! Component: 3800 - total flux cleaned = 0.00318386 Jy ! Component: 3850 - total flux cleaned = 0.00318405 Jy ! Component: 3900 - total flux cleaned = 0.00325386 Jy ! Component: 3950 - total flux cleaned = 0.0032538 Jy ! Component: 4000 - total flux cleaned = 0.00339251 Jy ! Component: 4050 - total flux cleaned = 0.00336945 Jy ! Total flux subtracted in 4096 components = 0.00343847 Jy ! Clean residual min=-0.001329 max=0.001409 Jy/beam ! Clean residual mean=-0.000004 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.464534 Jy keep ! Adding 282 model components to the UV plane model. ! The established model now contains 427 components and 0.464534 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv118_uvs/J2359-3133_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.136 x 4.348 at -6.194 degrees (North through East) ! Clean map min=-0.0024244 max=0.37304 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv118_uvs/J2359-3133_X_map.fits wmodel /scr/pima/rv118_uvs/J2359-3133_X_map.mod ! Writing 427 model components to file: /scr/pima/rv118_uvs/J2359-3133_X_map.mod wobs /scr/pima/rv118_uvs/J2359-3133_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv118_uvs/J2359-3133_X_uvs.fits wwins /scr/pima/rv118_uvs/J2359-3133_X_map.win ! wwins: Wrote 5 windows to /scr/pima/rv118_uvs/J2359-3133_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.373042 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000420033 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.337791 0.337791 0.675582 1.35116 2.70233 5.40465 10.8093 21.6186 43.2372 86.4744 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.373 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 888.123 quit ! Quitting program ! Log file /scr/pima/rv118_uvs/J2359-3133_X_dfm.log closed on Sun Dec 10 00:12:16 2017