! Started logfile: /scr/pima/rv118_uvs/J2332-4118_S_dfm.log on Sun Dec 10 00:12:31 2017 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23275 obs /scr/pima/rv118_uvs/J2332-4118_S_uva.fits ! Reading UV FITS file: /scr/pima/rv118_uvs/J2332-4118_S_uva.fits ! AN table 1: 44 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.997835 visibilities/baseline/integration-bin. ! Found source: J2332-4118 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23275e+09 8e+06 1 8e+06 ! 02 2 2.26275e+09 8e+06 1 8e+06 ! 03 3 2.35275e+09 8e+06 1 8e+06 ! 04 4 2.37275e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 3688 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2332-4118_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.060955Jy sigma=12.569366 ! Fit after self-cal, rms=0.765146Jy sigma=8.930274 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.855 mas, bmaj=17.42 mas, bpa=14.62 degrees ! Estimated noise=1.81335 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.182599 Jy ! Component: 100 - total flux cleaned = 0.227582 Jy ! Total flux subtracted in 100 components = 0.227582 Jy ! Clean residual min=-0.021348 max=0.024742 Jy/beam ! Clean residual mean=-0.000246 rms=0.006871 Jy/beam ! Combined flux in latest and established models = 0.227582 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.227582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192528Jy sigma=1.592338 ! Fit after self-cal, rms=0.192531Jy sigma=1.591721 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.845 mas, bmaj=20.96 mas, bpa=13.24 degrees ! Estimated noise=1.0163 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0398101 Jy ! Component: 100 - total flux cleaned = 0.0604965 Jy ! Component: 150 - total flux cleaned = 0.0722088 Jy ! Component: 200 - total flux cleaned = 0.0790802 Jy ! Total flux subtracted in 200 components = 0.0790802 Jy ! Clean residual min=-0.016565 max=0.014078 Jy/beam ! Clean residual mean=-0.000181 rms=0.004193 Jy/beam ! Combined flux in latest and established models = 0.306663 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 61 components and 0.306663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184802Jy sigma=1.441759 ! Fit after self-cal, rms=0.184771Jy sigma=1.440753 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.845 x 20.96 at 13.24 degrees (North through East) ! Clean map min=-0.016042 max=0.23045 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 KP 1.03 LA 0.97 NL 1.34 ! OV 0.98 PT 1.04 SC 1.25 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.05 KP 1.01 LA 0.96 NL 1.30 ! OV 1.00 PT 1.04 SC 1.24 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.10 KP 0.57 LA 1.00 NL 0.71 ! OV 1.04 PT 1.05 SC 0.64 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.04 KP 1.05 LA 0.98 NL 1.34 ! OV 0.99 PT 1.06 SC 1.33 ! ! ! Fit before self-cal, rms=0.184771Jy sigma=1.440753 ! Fit after self-cal, rms=0.121244Jy sigma=1.111093 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.814 mas, bmaj=21.19 mas, bpa=13.22 degrees ! Estimated noise=1.01682 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00249335 Jy ! Component: 100 - total flux cleaned = -0.0026381 Jy ! Component: 150 - total flux cleaned = -0.00290482 Jy ! Component: 200 - total flux cleaned = -0.00290257 Jy ! Total flux subtracted in 200 components = -0.00290257 Jy ! Clean residual min=-0.007418 max=0.006347 Jy/beam ! Clean residual mean=-0.000030 rms=0.001650 Jy/beam ! Combined flux in latest and established models = 0.30376 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 66 components and 0.30376 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120752Jy sigma=1.108164 ! Fit after self-cal, rms=0.121400Jy sigma=1.104089 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121400Jy sigma=1.104089 ! Fit after self-cal, rms=0.123258Jy sigma=1.103526 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.812 mas, bmaj=21.27 mas, bpa=13.23 degrees ! Estimated noise=1.01609 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00184155 Jy ! Component: 100 - total flux cleaned = -0.00207869 Jy ! Component: 150 - total flux cleaned = -0.00208587 Jy ! Component: 200 - total flux cleaned = -0.00208846 Jy ! Total flux subtracted in 200 components = -0.00208846 Jy ! Clean residual min=-0.006673 max=0.006248 Jy/beam ! Clean residual mean=-0.000027 rms=0.001586 Jy/beam ! Combined flux in latest and established models = 0.301672 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 71 components and 0.301672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122931Jy sigma=1.101733 ! Fit after self-cal, rms=0.122955Jy sigma=1.101711 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.1094e-06 Jy ! Component: 100 - total flux cleaned = 8.26906e-06 Jy ! Component: 150 - total flux cleaned = 1.14143e-05 Jy ! Component: 200 - total flux cleaned = 1.50991e-05 Jy ! Total flux subtracted in 200 components = 1.50991e-05 Jy ! Clean residual min=-0.006340 max=0.006303 Jy/beam ! Clean residual mean=-0.000027 rms=0.001560 Jy/beam ! Combined flux in latest and established models = 0.301687 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 71 components and 0.301687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122786Jy sigma=1.100667 ! Fit after self-cal, rms=0.122775Jy sigma=1.100635 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122775Jy sigma=1.100635 ! Fit after self-cal, rms=0.112985Jy sigma=1.086920 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.814 mas, bmaj=21.27 mas, bpa=13.17 degrees ! Estimated noise=1.01037 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00068404 Jy ! Component: 100 - total flux cleaned = -0.000748596 Jy ! Component: 150 - total flux cleaned = -0.000746287 Jy ! Component: 200 - total flux cleaned = -0.000746949 Jy ! Total flux subtracted in 200 components = -0.000746949 Jy ! Clean residual min=-0.005762 max=0.005758 Jy/beam ! Clean residual mean=-0.000023 rms=0.001350 Jy/beam ! Combined flux in latest and established models = 0.30094 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 74 components and 0.30094 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112900Jy sigma=1.086127 ! Fit after self-cal, rms=0.112916Jy sigma=1.085981 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.6229e-05 Jy ! Component: 100 - total flux cleaned = 8.50682e-05 Jy ! Component: 150 - total flux cleaned = 4.14254e-05 Jy ! Component: 200 - total flux cleaned = 8.23533e-05 Jy ! Total flux subtracted in 200 components = 8.23533e-05 Jy ! Clean residual min=-0.005594 max=0.005666 Jy/beam ! Clean residual mean=-0.000023 rms=0.001340 Jy/beam ! Combined flux in latest and established models = 0.301022 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 79 components and 0.301022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112872Jy sigma=1.085640 ! Fit after self-cal, rms=0.112866Jy sigma=1.085606 ! Inverting map ! Added new window around map position (16.5, 26). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00540979 Jy ! Component: 100 - total flux cleaned = 0.00687643 Jy ! Component: 150 - total flux cleaned = 0.00695927 Jy ! Component: 200 - total flux cleaned = 0.00710801 Jy ! Total flux subtracted in 200 components = 0.00710801 Jy ! Clean residual min=-0.004563 max=0.004363 Jy/beam ! Clean residual mean=0.000004 rms=0.001082 Jy/beam ! Combined flux in latest and established models = 0.30813 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 119 components and 0.30813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112582Jy sigma=1.081313 ! Fit after self-cal, rms=0.112550Jy sigma=1.081010 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112550Jy sigma=1.081010 ! Fit after self-cal, rms=0.112530Jy sigma=1.080405 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.699 mas, bmaj=37.55 mas, bpa=-0.6266 degrees ! Estimated noise=1.13704 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00236973 Jy ! Component: 100 - total flux cleaned = 0.00226186 Jy ! Component: 150 - total flux cleaned = 0.00211688 Jy ! Component: 200 - total flux cleaned = 0.00199399 Jy ! Total flux subtracted in 200 components = 0.00199399 Jy ! Clean residual min=-0.003445 max=0.003379 Jy/beam ! Clean residual mean=0.000022 rms=0.000998 Jy/beam ! Combined flux in latest and established models = 0.310124 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 146 components and 0.310124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112471Jy sigma=1.079892 ! Fit after self-cal, rms=0.112493Jy sigma=1.079818 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000129735 Jy ! Component: 100 - total flux cleaned = 5.68861e-05 Jy ! Component: 150 - total flux cleaned = 5.66241e-05 Jy ! Component: 200 - total flux cleaned = 8.68791e-05 Jy ! Total flux subtracted in 200 components = 8.68791e-05 Jy ! Clean residual min=-0.003519 max=0.003205 Jy/beam ! Clean residual mean=0.000026 rms=0.000973 Jy/beam ! Combined flux in latest and established models = 0.310211 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 154 components and 0.310211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112469Jy sigma=1.079820 ! Fit after self-cal, rms=0.112470Jy sigma=1.079801 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.813 mas, bmaj=21.28 mas, bpa=13.12 degrees ! Estimated noise=1.00596 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.813 x 21.28 at 13.12 degrees (North through East) ! Clean map min=-0.003596 max=0.23731 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.804 mas, bmaj=17.75 mas, bpa=14.17 degrees ! Estimated noise=1.84527 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.185749 Jy ! Component: 100 - total flux cleaned = 0.229969 Jy ! Component: 150 - total flux cleaned = 0.252173 Jy ! Component: 200 - total flux cleaned = 0.267138 Jy ! Total flux subtracted in 200 components = 0.267138 Jy ! Clean residual min=-0.009007 max=0.009568 Jy/beam ! Clean residual mean=-0.000085 rms=0.002387 Jy/beam ! Combined flux in latest and established models = 0.267138 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.267138 Jy ! Inverting map and beam ! Estimated beam: bmin=3.813 mas, bmaj=21.28 mas, bpa=13.12 degrees ! Estimated noise=1.00596 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0160289 Jy ! Component: 100 - total flux cleaned = 0.0251222 Jy ! Component: 150 - total flux cleaned = 0.0314294 Jy ! Component: 200 - total flux cleaned = 0.0357582 Jy ! Total flux subtracted in 200 components = 0.0357582 Jy ! Clean residual min=-0.004988 max=0.004261 Jy/beam ! Clean residual mean=-0.000021 rms=0.001173 Jy/beam ! Combined flux in latest and established models = 0.302896 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 68 components and 0.302896 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.699 mas, bmaj=37.55 mas, bpa=-0.6266 degrees ! Estimated noise=1.13704 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00394159 Jy ! Component: 100 - total flux cleaned = 0.00514415 Jy ! Component: 150 - total flux cleaned = 0.0054811 Jy ! Component: 200 - total flux cleaned = 0.00569029 Jy ! Total flux subtracted in 200 components = 0.00569029 Jy ! Clean residual min=-0.003819 max=0.003286 Jy/beam ! Clean residual mean=0.000010 rms=0.001017 Jy/beam ! Combined flux in latest and established models = 0.308587 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000177899 Jy ! Component: 100 - total flux cleaned = 0.000328611 Jy ! Component: 150 - total flux cleaned = 0.000457322 Jy ! Component: 200 - total flux cleaned = 0.000569359 Jy ! Total flux subtracted in 200 components = 0.000569359 Jy ! Clean residual min=-0.003532 max=0.003257 Jy/beam ! Clean residual mean=0.000020 rms=0.000972 Jy/beam ! Combined flux in latest and established models = 0.309156 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 95 components and 0.309156 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.813 mas, bmaj=21.28 mas, bpa=13.12 degrees ! Estimated noise=1.00596 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000375948 Jy ! Component: 100 - total flux cleaned = -0.000295887 Jy ! Component: 150 - total flux cleaned = -0.000223847 Jy ! Component: 200 - total flux cleaned = -9.93595e-05 Jy ! Total flux subtracted in 200 components = -9.93595e-05 Jy ! Clean residual min=-0.003867 max=0.004043 Jy/beam ! Clean residual mean=0.000014 rms=0.000970 Jy/beam ! Combined flux in latest and established models = 0.309057 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 114 components and 0.309057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112442Jy sigma=1.080319 ! Fit after self-cal, rms=0.112449Jy sigma=1.080101 wmodel J2332-4118_S_map.mod ! Writing 114 model components to file: J2332-4118_S_map.mod wobs J2332-4118_S_uvs.fits ! Writing UV FITS file: J2332-4118_S_uvs.fits wwins J2332-4118_S_map.win ! wwins: Wrote 2 windows to J2332-4118_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000920579 Jy ! Component: 100 - total flux cleaned = -0.00153699 Jy ! Component: 150 - total flux cleaned = -0.00165028 Jy ! Component: 200 - total flux cleaned = -0.00170259 Jy ! Component: 250 - total flux cleaned = -0.00160195 Jy ! Component: 300 - total flux cleaned = -0.00150704 Jy ! Component: 350 - total flux cleaned = -0.00141446 Jy ! Component: 400 - total flux cleaned = -0.00136981 Jy ! Component: 450 - total flux cleaned = -0.00128193 Jy ! Component: 500 - total flux cleaned = -0.0012821 Jy ! Component: 550 - total flux cleaned = -0.00128184 Jy ! Component: 600 - total flux cleaned = -0.0013226 Jy ! Component: 650 - total flux cleaned = -0.00132175 Jy ! Component: 700 - total flux cleaned = -0.00108628 Jy ! Component: 750 - total flux cleaned = -0.00100927 Jy ! Component: 800 - total flux cleaned = -0.00100847 Jy ! Component: 850 - total flux cleaned = -0.000787024 Jy ! Component: 900 - total flux cleaned = -0.000786222 Jy ! Component: 950 - total flux cleaned = -0.000536865 Jy ! Component: 1000 - total flux cleaned = -0.000397115 Jy ! Component: 1050 - total flux cleaned = -0.00032797 Jy ! Component: 1100 - total flux cleaned = -0.000327679 Jy ! Component: 1150 - total flux cleaned = -0.00022668 Jy ! Component: 1200 - total flux cleaned = -6.17486e-05 Jy ! Component: 1250 - total flux cleaned = 3.58219e-05 Jy ! Component: 1300 - total flux cleaned = 0.000132293 Jy ! Component: 1350 - total flux cleaned = 0.000258481 Jy ! Component: 1400 - total flux cleaned = 0.000382994 Jy ! Component: 1450 - total flux cleaned = 0.000444358 Jy ! Component: 1500 - total flux cleaned = 0.000595882 Jy ! Component: 1550 - total flux cleaned = 0.000596114 Jy ! Component: 1600 - total flux cleaned = 0.000685224 Jy ! Component: 1650 - total flux cleaned = 0.000685485 Jy ! Component: 1700 - total flux cleaned = 0.000715004 Jy ! Component: 1750 - total flux cleaned = 0.000772127 Jy ! Component: 1800 - total flux cleaned = 0.000800072 Jy ! Component: 1850 - total flux cleaned = 0.000855272 Jy ! Component: 1900 - total flux cleaned = 0.000799777 Jy ! Component: 1950 - total flux cleaned = 0.000772485 Jy ! Component: 2000 - total flux cleaned = 0.000691757 Jy ! Component: 2050 - total flux cleaned = 0.000691714 Jy ! Component: 2100 - total flux cleaned = 0.000586564 Jy ! Component: 2150 - total flux cleaned = 0.000586967 Jy ! Component: 2200 - total flux cleaned = 0.000690118 Jy ! Component: 2250 - total flux cleaned = 0.000561812 Jy ! Component: 2300 - total flux cleaned = 0.000510928 Jy ! Component: 2350 - total flux cleaned = 0.000460808 Jy ! Component: 2400 - total flux cleaned = 0.000535581 Jy ! Component: 2450 - total flux cleaned = 0.000510924 Jy ! Component: 2500 - total flux cleaned = 0.000559996 Jy ! Component: 2550 - total flux cleaned = 0.000560269 Jy ! Component: 2600 - total flux cleaned = 0.000584608 Jy ! Component: 2650 - total flux cleaned = 0.000680368 Jy ! Component: 2700 - total flux cleaned = 0.000609214 Jy ! Component: 2750 - total flux cleaned = 0.000632782 Jy ! Component: 2800 - total flux cleaned = 0.00060939 Jy ! Component: 2850 - total flux cleaned = 0.000586145 Jy ! Component: 2900 - total flux cleaned = 0.000609112 Jy ! Component: 2950 - total flux cleaned = 0.000517659 Jy ! Component: 3000 - total flux cleaned = 0.000517584 Jy ! Component: 3050 - total flux cleaned = 0.000405207 Jy ! Component: 3100 - total flux cleaned = 0.000338368 Jy ! Component: 3150 - total flux cleaned = 0.000427192 Jy ! Component: 3200 - total flux cleaned = 0.000360851 Jy ! Component: 3250 - total flux cleaned = 0.000317049 Jy ! Component: 3300 - total flux cleaned = 0.000317039 Jy ! Component: 3350 - total flux cleaned = 0.000230253 Jy ! Component: 3400 - total flux cleaned = 0.000187289 Jy ! Component: 3450 - total flux cleaned = 0.000187266 Jy ! Component: 3500 - total flux cleaned = 0.000144526 Jy ! Component: 3550 - total flux cleaned = 0.00010223 Jy ! Component: 3600 - total flux cleaned = 0.000144453 Jy ! Component: 3650 - total flux cleaned = 8.14606e-05 Jy ! Component: 3700 - total flux cleaned = 3.96918e-05 Jy ! Component: 3750 - total flux cleaned = 3.94286e-05 Jy ! Component: 3800 - total flux cleaned = -0.000105618 Jy ! Component: 3850 - total flux cleaned = -0.000147075 Jy ! Component: 3900 - total flux cleaned = -0.000249755 Jy ! Component: 3950 - total flux cleaned = -0.00029064 Jy ! Component: 4000 - total flux cleaned = -0.000413049 Jy ! Component: 4050 - total flux cleaned = -0.000474167 Jy ! Total flux subtracted in 4096 components = -0.000535142 Jy ! Clean residual min=-0.001230 max=0.001111 Jy/beam ! Clean residual mean=0.000003 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.308522 Jy keep ! Adding 239 model components to the UV plane model. ! The established model now contains 353 components and 0.308522 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv118_uvs/J2332-4118_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.813 x 21.28 at 13.12 degrees (North through East) ! Clean map min=-0.0033524 max=0.23811 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv118_uvs/J2332-4118_S_map.fits wmodel /scr/pima/rv118_uvs/J2332-4118_S_map.mod ! Writing 353 model components to file: /scr/pima/rv118_uvs/J2332-4118_S_map.mod wobs /scr/pima/rv118_uvs/J2332-4118_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv118_uvs/J2332-4118_S_uvs.fits wwins /scr/pima/rv118_uvs/J2332-4118_S_map.win ! wwins: Wrote 3 windows to /scr/pima/rv118_uvs/J2332-4118_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.23811 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000364515 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.459259 0.459259 0.918518 1.83704 3.67407 7.34815 14.6963 29.3926 58.7852 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.238 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 653.226 quit ! Quitting program ! Log file /scr/pima/rv118_uvs/J2332-4118_S_dfm.log closed on Sun Dec 10 00:12:35 2017