! Started logfile: /scr/pima/rv118_uvs/J2316-4041_X_dfm.log on Sun Dec 10 00:11:59 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv118_uvs/J2316-4041_X_uva.fits ! Reading UV FITS file: /scr/pima/rv118_uvs/J2316-4041_X_uva.fits ! AN table 1: 28 integrations on 21 of 21 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J2316-4041 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 2352 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2316-4041_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.021191Jy sigma=14.704807 ! Fit after self-cal, rms=0.777291Jy sigma=10.781581 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7707 mas, bmaj=4.752 mas, bpa=15.76 degrees ! Estimated noise=1.89315 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.15798 Jy ! Component: 100 - total flux cleaned = 0.213968 Jy ! Total flux subtracted in 100 components = 0.213968 Jy ! Clean residual min=-0.016146 max=0.026541 Jy/beam ! Clean residual mean=0.000069 rms=0.005284 Jy/beam ! Combined flux in latest and established models = 0.213968 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.213968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103488Jy sigma=1.508351 ! Fit after self-cal, rms=0.103434Jy sigma=1.507341 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.055 mas, bmaj=5.611 mas, bpa=14.52 degrees ! Estimated noise=1.04771 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0517338 Jy ! Component: 100 - total flux cleaned = 0.0787753 Jy ! Component: 150 - total flux cleaned = 0.094258 Jy ! Component: 200 - total flux cleaned = 0.103402 Jy ! Total flux subtracted in 200 components = 0.103402 Jy ! Clean residual min=-0.010602 max=0.012276 Jy/beam ! Clean residual mean=0.000033 rms=0.003017 Jy/beam ! Combined flux in latest and established models = 0.31737 Jy ! Performing phase self-cal ! Adding 68 model components to the UV plane model. ! The established model now contains 84 components and 0.31737 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081009Jy sigma=1.020733 ! Fit after self-cal, rms=0.081038Jy sigma=1.019910 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.055 x 5.611 at 14.52 degrees (North through East) ! Clean map min=-0.010612 max=0.21915 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 KP 0.97 LA 0.93 NL 1.29 ! OV 0.95 PT 0.99 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.98 KP 0.96 LA 0.94 NL 1.36 ! OV 0.98 PT 1.00 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.98 KP 0.98 LA 0.96 NL 1.33 ! OV 0.96 PT 1.02 SC 1.08 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 KP 0.99 LA 0.96 NL 1.32 ! OV 0.94 PT 1.01 SC 1.05 ! ! ! Fit before self-cal, rms=0.081038Jy sigma=1.019910 ! Fit after self-cal, rms=0.087202Jy sigma=0.953721 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.057 mas, bmaj=5.89 mas, bpa=14.7 degrees ! Estimated noise=1.06356 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0039336 Jy ! Component: 100 - total flux cleaned = -0.00449627 Jy ! Component: 150 - total flux cleaned = -0.00481692 Jy ! Component: 200 - total flux cleaned = -0.00509186 Jy ! Total flux subtracted in 200 components = -0.00509186 Jy ! Clean residual min=-0.008265 max=0.008562 Jy/beam ! Clean residual mean=0.000028 rms=0.001991 Jy/beam ! Combined flux in latest and established models = 0.312278 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 97 components and 0.312278 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086247Jy sigma=0.945255 ! Fit after self-cal, rms=0.086468Jy sigma=0.944931 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086468Jy sigma=0.944931 ! Fit after self-cal, rms=0.087929Jy sigma=0.943680 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.06 mas, bmaj=5.93 mas, bpa=14.71 degrees ! Estimated noise=1.06224 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00337918 Jy ! Component: 100 - total flux cleaned = -0.00378102 Jy ! Component: 150 - total flux cleaned = -0.00403234 Jy ! Component: 200 - total flux cleaned = -0.00437861 Jy ! Total flux subtracted in 200 components = -0.00437861 Jy ! Clean residual min=-0.007733 max=0.007854 Jy/beam ! Clean residual mean=0.000027 rms=0.001888 Jy/beam ! Combined flux in latest and established models = 0.307899 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 100 components and 0.307899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087365Jy sigma=0.938928 ! Fit after self-cal, rms=0.087369Jy sigma=0.938892 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000206863 Jy ! Component: 100 - total flux cleaned = -0.000502815 Jy ! Component: 150 - total flux cleaned = -0.000771051 Jy ! Component: 200 - total flux cleaned = -0.00101734 Jy ! Total flux subtracted in 200 components = -0.00101734 Jy ! Clean residual min=-0.007384 max=0.007897 Jy/beam ! Clean residual mean=0.000029 rms=0.001854 Jy/beam ! Combined flux in latest and established models = 0.306882 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 100 components and 0.306882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087127Jy sigma=0.936542 ! Fit after self-cal, rms=0.087113Jy sigma=0.936523 ! Inverting map ! Added new window around map position (-7.6, 17). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00458876 Jy ! Component: 100 - total flux cleaned = 0.00494438 Jy ! Component: 150 - total flux cleaned = 0.00468158 Jy ! Component: 200 - total flux cleaned = 0.00467869 Jy ! Total flux subtracted in 200 components = 0.00467869 Jy ! Clean residual min=-0.006122 max=0.006851 Jy/beam ! Clean residual mean=0.000016 rms=0.001561 Jy/beam ! Combined flux in latest and established models = 0.311561 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 128 components and 0.311561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086329Jy sigma=0.923723 ! Fit after self-cal, rms=0.086291Jy sigma=0.922883 ! Inverting map ! Added new window around map position (-3.4, 12.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00626558 Jy ! Component: 100 - total flux cleaned = 0.00687138 Jy ! Component: 150 - total flux cleaned = 0.00721222 Jy ! Component: 200 - total flux cleaned = 0.00721204 Jy ! Total flux subtracted in 200 components = 0.00721204 Jy ! Clean residual min=-0.004943 max=0.006993 Jy/beam ! Clean residual mean=0.000005 rms=0.001312 Jy/beam ! Combined flux in latest and established models = 0.318773 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 165 components and 0.318773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085578Jy sigma=0.914728 ! Fit after self-cal, rms=0.085498Jy sigma=0.913826 ! Inverting map ! Added new window around map position (-14, 22.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00341302 Jy ! Component: 100 - total flux cleaned = 0.00409878 Jy ! Component: 150 - total flux cleaned = 0.00490254 Jy ! Component: 200 - total flux cleaned = 0.00531115 Jy ! Total flux subtracted in 200 components = 0.00531115 Jy ! Clean residual min=-0.004698 max=0.003817 Jy/beam ! Clean residual mean=0.000001 rms=0.001133 Jy/beam ! Combined flux in latest and established models = 0.324084 Jy ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 210 components and 0.324084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084819Jy sigma=0.907556 ! Fit after self-cal, rms=0.084829Jy sigma=0.907132 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084829Jy sigma=0.907132 ! Fit after self-cal, rms=0.085383Jy sigma=0.900996 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.056 mas, bmaj=5.928 mas, bpa=14.75 degrees ! Estimated noise=1.06017 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00199484 Jy ! Component: 100 - total flux cleaned = 0.002754 Jy ! Component: 150 - total flux cleaned = 0.00311633 Jy ! Component: 200 - total flux cleaned = 0.00318018 Jy ! Total flux subtracted in 200 components = 0.00318018 Jy ! Clean residual min=-0.003689 max=0.002979 Jy/beam ! Clean residual mean=-0.000000 rms=0.000895 Jy/beam ! Combined flux in latest and established models = 0.327264 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 239 components and 0.327264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085173Jy sigma=0.899021 ! Fit after self-cal, rms=0.085198Jy sigma=0.898913 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000349752 Jy ! Component: 100 - total flux cleaned = 0.000408598 Jy ! Component: 150 - total flux cleaned = 0.0004082 Jy ! Component: 200 - total flux cleaned = 0.000408765 Jy ! Total flux subtracted in 200 components = 0.000408765 Jy ! Clean residual min=-0.003436 max=0.002921 Jy/beam ! Clean residual mean=-0.000001 rms=0.000864 Jy/beam ! Combined flux in latest and established models = 0.327673 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 254 components and 0.327673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085092Jy sigma=0.898089 ! Fit after self-cal, rms=0.085093Jy sigma=0.898068 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085093Jy sigma=0.898068 ! Fit after self-cal, rms=0.085011Jy sigma=0.897706 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.811 mas, bmaj=11.65 mas, bpa=-0.6873 degrees ! Estimated noise=1.16223 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137942 Jy ! Component: 100 - total flux cleaned = 0.00170523 Jy ! Component: 150 - total flux cleaned = 0.00179654 Jy ! Component: 200 - total flux cleaned = 0.00175505 Jy ! Total flux subtracted in 200 components = 0.00175505 Jy ! Clean residual min=-0.002860 max=0.002826 Jy/beam ! Clean residual mean=-0.000002 rms=0.000901 Jy/beam ! Combined flux in latest and established models = 0.329428 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 279 components and 0.329428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084943Jy sigma=0.897013 ! Fit after self-cal, rms=0.084949Jy sigma=0.896971 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.09085e-05 Jy ! Component: 100 - total flux cleaned = 7.91761e-06 Jy ! Component: 150 - total flux cleaned = 7.45086e-06 Jy ! Component: 200 - total flux cleaned = -6.04315e-05 Jy ! Total flux subtracted in 200 components = -6.04315e-05 Jy ! Clean residual min=-0.002920 max=0.002840 Jy/beam ! Clean residual mean=-0.000003 rms=0.000876 Jy/beam ! Combined flux in latest and established models = 0.329368 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 286 components and 0.329368 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084908Jy sigma=0.896734 ! Fit after self-cal, rms=0.084909Jy sigma=0.896726 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.056 mas, bmaj=5.934 mas, bpa=14.74 degrees ! Estimated noise=1.0585 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.056 x 5.934 at 14.74 degrees (North through East) ! Clean map min=-0.0030587 max=0.21796 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7609 mas, bmaj=4.965 mas, bpa=15.89 degrees ! Estimated noise=1.94813 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.162885 Jy ! Component: 100 - total flux cleaned = 0.222004 Jy ! Component: 150 - total flux cleaned = 0.252016 Jy ! Component: 200 - total flux cleaned = 0.268879 Jy ! Total flux subtracted in 200 components = 0.268879 Jy ! Clean residual min=-0.008972 max=0.009486 Jy/beam ! Clean residual mean=0.000039 rms=0.002469 Jy/beam ! Combined flux in latest and established models = 0.268879 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.268879 Jy ! Inverting map and beam ! Estimated beam: bmin=1.056 mas, bmaj=5.934 mas, bpa=14.74 degrees ! Estimated noise=1.0585 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0176546 Jy ! Component: 100 - total flux cleaned = 0.0286268 Jy ! Component: 150 - total flux cleaned = 0.0367035 Jy ! Component: 200 - total flux cleaned = 0.0429317 Jy ! Total flux subtracted in 200 components = 0.0429317 Jy ! Clean residual min=-0.003982 max=0.004658 Jy/beam ! Clean residual mean=0.000030 rms=0.001279 Jy/beam ! Combined flux in latest and established models = 0.31181 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 85 components and 0.31181 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.811 mas, bmaj=11.65 mas, bpa=-0.6873 degrees ! Estimated noise=1.16223 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00621495 Jy ! Component: 100 - total flux cleaned = 0.0102651 Jy ! Component: 150 - total flux cleaned = 0.0120449 Jy ! Component: 200 - total flux cleaned = 0.0128404 Jy ! Total flux subtracted in 200 components = 0.0128404 Jy ! Clean residual min=-0.002926 max=0.003061 Jy/beam ! Clean residual mean=0.000017 rms=0.000980 Jy/beam ! Combined flux in latest and established models = 0.324651 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000479575 Jy ! Component: 100 - total flux cleaned = 0.000735414 Jy ! Component: 150 - total flux cleaned = 0.0011927 Jy ! Component: 200 - total flux cleaned = 0.00152138 Jy ! Total flux subtracted in 200 components = 0.00152138 Jy ! Clean residual min=-0.002616 max=0.002955 Jy/beam ! Clean residual mean=0.000010 rms=0.000862 Jy/beam ! Combined flux in latest and established models = 0.326172 Jy ! Adding 88 model components to the UV plane model. ! The established model now contains 171 components and 0.326172 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.056 mas, bmaj=5.934 mas, bpa=14.74 degrees ! Estimated noise=1.0585 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000203682 Jy ! Component: 100 - total flux cleaned = -2.06265e-05 Jy ! Component: 150 - total flux cleaned = 0.000353042 Jy ! Component: 200 - total flux cleaned = 0.000351542 Jy ! Total flux subtracted in 200 components = 0.000351542 Jy ! Clean residual min=-0.003282 max=0.002944 Jy/beam ! Clean residual mean=0.000005 rms=0.000795 Jy/beam ! Combined flux in latest and established models = 0.326524 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 203 components and 0.326524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084923Jy sigma=0.896876 ! Fit after self-cal, rms=0.084864Jy sigma=0.896690 wmodel J2316-4041_X_map.mod ! Writing 203 model components to file: J2316-4041_X_map.mod wobs J2316-4041_X_uvs.fits ! Writing UV FITS file: J2316-4041_X_uvs.fits wwins J2316-4041_X_map.win ! wwins: Wrote 4 windows to J2316-4041_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0010916 Jy ! Component: 100 - total flux cleaned = -0.0015145 Jy ! Component: 150 - total flux cleaned = -0.00171362 Jy ! Component: 200 - total flux cleaned = -0.0018089 Jy ! Component: 250 - total flux cleaned = -0.00198826 Jy ! Component: 300 - total flux cleaned = -0.00190406 Jy ! Component: 350 - total flux cleaned = -0.00198771 Jy ! Component: 400 - total flux cleaned = -0.00186692 Jy ! Component: 450 - total flux cleaned = -0.00175038 Jy ! Component: 500 - total flux cleaned = -0.00167529 Jy ! Component: 550 - total flux cleaned = -0.00156453 Jy ! Component: 600 - total flux cleaned = -0.00149259 Jy ! Component: 650 - total flux cleaned = -0.00145715 Jy ! Component: 700 - total flux cleaned = -0.00135334 Jy ! Component: 750 - total flux cleaned = -0.00128657 Jy ! Component: 800 - total flux cleaned = -0.00128715 Jy ! Component: 850 - total flux cleaned = -0.00112354 Jy ! Component: 900 - total flux cleaned = -0.000930899 Jy ! Component: 950 - total flux cleaned = -0.000993813 Jy ! Component: 1000 - total flux cleaned = -0.000993743 Jy ! Component: 1050 - total flux cleaned = -0.000993855 Jy ! Component: 1100 - total flux cleaned = -0.000902801 Jy ! Component: 1150 - total flux cleaned = -0.00102292 Jy ! Component: 1200 - total flux cleaned = -0.00114136 Jy ! Component: 1250 - total flux cleaned = -0.00105261 Jy ! Component: 1300 - total flux cleaned = -0.00108174 Jy ! Component: 1350 - total flux cleaned = -0.0011678 Jy ! Component: 1400 - total flux cleaned = -0.00128137 Jy ! Component: 1450 - total flux cleaned = -0.00130916 Jy ! Component: 1500 - total flux cleaned = -0.00142058 Jy ! Component: 1550 - total flux cleaned = -0.00142048 Jy ! Component: 1600 - total flux cleaned = -0.00152962 Jy ! Component: 1650 - total flux cleaned = -0.00144878 Jy ! Component: 1700 - total flux cleaned = -0.00147532 Jy ! Component: 1750 - total flux cleaned = -0.00158089 Jy ! Component: 1800 - total flux cleaned = -0.00163314 Jy ! Component: 1850 - total flux cleaned = -0.00155476 Jy ! Component: 1900 - total flux cleaned = -0.0015546 Jy ! Component: 1950 - total flux cleaned = -0.00163141 Jy ! Component: 2000 - total flux cleaned = -0.00173285 Jy ! Component: 2050 - total flux cleaned = -0.00165713 Jy ! Component: 2100 - total flux cleaned = -0.00175708 Jy ! Component: 2150 - total flux cleaned = -0.00178182 Jy ! Component: 2200 - total flux cleaned = -0.0018309 Jy ! Component: 2250 - total flux cleaned = -0.0018794 Jy ! Component: 2300 - total flux cleaned = -0.00190346 Jy ! Component: 2350 - total flux cleaned = -0.0019513 Jy ! Component: 2400 - total flux cleaned = -0.00195141 Jy ! Component: 2450 - total flux cleaned = -0.00197519 Jy ! Component: 2500 - total flux cleaned = -0.00209265 Jy ! Component: 2550 - total flux cleaned = -0.00216273 Jy ! Component: 2600 - total flux cleaned = -0.00218577 Jy ! Component: 2650 - total flux cleaned = -0.00220871 Jy ! Component: 2700 - total flux cleaned = -0.00223153 Jy ! Component: 2750 - total flux cleaned = -0.00232229 Jy ! Component: 2800 - total flux cleaned = -0.0022548 Jy ! Component: 2850 - total flux cleaned = -0.00229963 Jy ! Component: 2900 - total flux cleaned = -0.00227734 Jy ! Component: 2950 - total flux cleaned = -0.00227741 Jy ! Component: 3000 - total flux cleaned = -0.00221174 Jy ! Component: 3050 - total flux cleaned = -0.0022119 Jy ! Component: 3100 - total flux cleaned = -0.00229864 Jy ! Component: 3150 - total flux cleaned = -0.00227699 Jy ! Component: 3200 - total flux cleaned = -0.00227703 Jy ! Component: 3250 - total flux cleaned = -0.00227696 Jy ! Component: 3300 - total flux cleaned = -0.0022979 Jy ! Component: 3350 - total flux cleaned = -0.00229808 Jy ! Component: 3400 - total flux cleaned = -0.00229815 Jy ! Component: 3450 - total flux cleaned = -0.00229819 Jy ! Component: 3500 - total flux cleaned = -0.00236055 Jy ! Component: 3550 - total flux cleaned = -0.00231916 Jy ! Component: 3600 - total flux cleaned = -0.00225747 Jy ! Component: 3650 - total flux cleaned = -0.0022575 Jy ! Component: 3700 - total flux cleaned = -0.00221676 Jy ! Component: 3750 - total flux cleaned = -0.00223717 Jy ! Component: 3800 - total flux cleaned = -0.002338 Jy ! Component: 3850 - total flux cleaned = -0.00229799 Jy ! Component: 3900 - total flux cleaned = -0.00227804 Jy ! Component: 3950 - total flux cleaned = -0.00229802 Jy ! Component: 4000 - total flux cleaned = -0.00227821 Jy ! Component: 4050 - total flux cleaned = -0.00229797 Jy ! Total flux subtracted in 4096 components = -0.00235688 Jy ! Clean residual min=-0.001151 max=0.001300 Jy/beam ! Clean residual mean=-0.000007 rms=0.000361 Jy/beam ! Combined flux in latest and established models = 0.324167 Jy keep ! Adding 247 model components to the UV plane model. ! The established model now contains 450 components and 0.324167 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv118_uvs/J2316-4041_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.056 x 5.934 at 14.74 degrees (North through East) ! Clean map min=-0.0031797 max=0.22346 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv118_uvs/J2316-4041_X_map.fits wmodel /scr/pima/rv118_uvs/J2316-4041_X_map.mod ! Writing 450 model components to file: /scr/pima/rv118_uvs/J2316-4041_X_map.mod wobs /scr/pima/rv118_uvs/J2316-4041_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv118_uvs/J2316-4041_X_uvs.fits wwins /scr/pima/rv118_uvs/J2316-4041_X_map.win ! wwins: Wrote 5 windows to /scr/pima/rv118_uvs/J2316-4041_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.223461 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000355699 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.477532 0.477532 0.955065 1.91013 3.82026 7.64052 15.281 30.5621 61.1241 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.223 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 628.229 quit ! Quitting program ! Log file /scr/pima/rv118_uvs/J2316-4041_X_dfm.log closed on Sun Dec 10 00:12:03 2017