! Started logfile: /scr/pima/rv118_uvs/J2316-4041_S_dfm.log on Sun Dec 10 00:12:22 2017 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23275 obs /scr/pima/rv118_uvs/J2316-4041_S_uva.fits ! Reading UV FITS file: /scr/pima/rv118_uvs/J2316-4041_S_uva.fits ! AN table 1: 28 integrations on 21 of 21 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J2316-4041 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23275e+09 8e+06 1 8e+06 ! 02 2 2.26275e+09 8e+06 1 8e+06 ! 03 3 2.35275e+09 8e+06 1 8e+06 ! 04 4 2.37275e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 2352 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2316-4041_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.099487Jy sigma=12.823742 ! Fit after self-cal, rms=0.600506Jy sigma=6.770539 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.73 mas, bmaj=18.52 mas, bpa=14.87 degrees ! Estimated noise=2.09898 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.328008 Jy ! Component: 100 - total flux cleaned = 0.408139 Jy ! Total flux subtracted in 100 components = 0.408139 Jy ! Clean residual min=-0.033813 max=0.039321 Jy/beam ! Clean residual mean=-0.000147 rms=0.010578 Jy/beam ! Combined flux in latest and established models = 0.408139 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.408139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.212920Jy sigma=2.199494 ! Fit after self-cal, rms=0.212736Jy sigma=2.197112 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.802 mas, bmaj=20.74 mas, bpa=14.84 degrees ! Estimated noise=1.29323 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0548365 Jy ! Component: 100 - total flux cleaned = 0.0814981 Jy ! Component: 150 - total flux cleaned = 0.0946805 Jy ! Component: 200 - total flux cleaned = 0.0974917 Jy ! Total flux subtracted in 200 components = 0.0974917 Jy ! Clean residual min=-0.026766 max=0.026710 Jy/beam ! Clean residual mean=-0.000009 rms=0.007877 Jy/beam ! Combined flux in latest and established models = 0.50563 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 30 components and 0.50563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200281Jy sigma=2.017768 ! Fit after self-cal, rms=0.200275Jy sigma=2.017033 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.802 x 20.74 at 14.84 degrees (North through East) ! Clean map min=-0.025627 max=0.37384 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.02 KP 1.01 LA 0.99 NL 1.36 ! OV 1.02 PT 1.05 SC 1.21 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.02 KP 1.03 LA 0.96 NL 1.28 ! OV 1.02 PT 1.06 SC 1.24 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.10 KP 0.54 LA 1.01 NL 0.88 ! OV 1.01 PT 1.07 SC 0.64 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.06 KP 1.02 LA 1.01 NL 1.35 ! OV 0.90 PT 1.05 SC 1.29 ! ! ! Fit before self-cal, rms=0.200275Jy sigma=2.017033 ! Fit after self-cal, rms=0.115987Jy sigma=1.100914 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.743 mas, bmaj=21.14 mas, bpa=14.85 degrees ! Estimated noise=1.30372 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0035647 Jy ! Component: 100 - total flux cleaned = -0.00495642 Jy ! Component: 150 - total flux cleaned = -0.00565202 Jy ! Component: 200 - total flux cleaned = -0.00564335 Jy ! Total flux subtracted in 200 components = -0.00564335 Jy ! Clean residual min=-0.009028 max=0.010556 Jy/beam ! Clean residual mean=0.000015 rms=0.002270 Jy/beam ! Combined flux in latest and established models = 0.499987 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 37 components and 0.499987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114485Jy sigma=1.088668 ! Fit after self-cal, rms=0.114999Jy sigma=1.084047 ! Inverting map ! Added new window around map position (-9.5, 27.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00754069 Jy ! Component: 100 - total flux cleaned = 0.00630531 Jy ! Component: 150 - total flux cleaned = 0.00545645 Jy ! Component: 200 - total flux cleaned = 0.00490649 Jy ! Total flux subtracted in 200 components = 0.00490649 Jy ! Clean residual min=-0.007922 max=0.008030 Jy/beam ! Clean residual mean=0.000047 rms=0.002032 Jy/beam ! Combined flux in latest and established models = 0.504894 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 56 components and 0.504894 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113242Jy sigma=1.072808 ! Fit after self-cal, rms=0.113160Jy sigma=1.071915 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113160Jy sigma=1.071915 ! Fit after self-cal, rms=0.114233Jy sigma=1.069220 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.734 mas, bmaj=21.2 mas, bpa=14.86 degrees ! Estimated noise=1.30109 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00110207 Jy ! Component: 100 - total flux cleaned = -0.00182025 Jy ! Component: 150 - total flux cleaned = -0.00181624 Jy ! Component: 200 - total flux cleaned = -0.0016732 Jy ! Total flux subtracted in 200 components = -0.0016732 Jy ! Clean residual min=-0.007278 max=0.007265 Jy/beam ! Clean residual mean=0.000039 rms=0.001832 Jy/beam ! Combined flux in latest and established models = 0.50322 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 70 components and 0.50322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113481Jy sigma=1.065037 ! Fit after self-cal, rms=0.113519Jy sigma=1.064844 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000613365 Jy ! Component: 100 - total flux cleaned = 0.000732019 Jy ! Component: 150 - total flux cleaned = 0.00072882 Jy ! Component: 200 - total flux cleaned = 0.000726772 Jy ! Total flux subtracted in 200 components = 0.000726772 Jy ! Clean residual min=-0.006879 max=0.007102 Jy/beam ! Clean residual mean=0.000042 rms=0.001787 Jy/beam ! Combined flux in latest and established models = 0.503947 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 78 components and 0.503947 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113177Jy sigma=1.063094 ! Fit after self-cal, rms=0.113183Jy sigma=1.063046 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113183Jy sigma=1.063046 ! Fit after self-cal, rms=0.112695Jy sigma=1.048019 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.731 mas, bmaj=21.24 mas, bpa=14.81 degrees ! Estimated noise=1.29787 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000784386 Jy ! Component: 100 - total flux cleaned = 0.000680035 Jy ! Component: 150 - total flux cleaned = 0.000689308 Jy ! Component: 200 - total flux cleaned = 0.000789234 Jy ! Total flux subtracted in 200 components = 0.000789234 Jy ! Clean residual min=-0.004757 max=0.004499 Jy/beam ! Clean residual mean=0.000061 rms=0.001225 Jy/beam ! Combined flux in latest and established models = 0.504737 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 95 components and 0.504737 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112374Jy sigma=1.045643 ! Fit after self-cal, rms=0.112402Jy sigma=1.045529 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000319985 Jy ! Component: 100 - total flux cleaned = 0.00032052 Jy ! Component: 150 - total flux cleaned = 0.000320252 Jy ! Component: 200 - total flux cleaned = 0.000242157 Jy ! Total flux subtracted in 200 components = 0.000242157 Jy ! Clean residual min=-0.004624 max=0.004521 Jy/beam ! Clean residual mean=0.000063 rms=0.001186 Jy/beam ! Combined flux in latest and established models = 0.504979 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 106 components and 0.504979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112252Jy sigma=1.044516 ! Fit after self-cal, rms=0.112255Jy sigma=1.044498 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112255Jy sigma=1.044498 ! Fit after self-cal, rms=0.112779Jy sigma=1.043968 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.694 mas, bmaj=37.52 mas, bpa=1.047 degrees ! Estimated noise=1.48401 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000385345 Jy ! Component: 100 - total flux cleaned = 0.000160192 Jy ! Component: 150 - total flux cleaned = -9.51351e-05 Jy ! Component: 200 - total flux cleaned = -0.000281493 Jy ! Total flux subtracted in 200 components = -0.000281493 Jy ! Clean residual min=-0.003847 max=0.004334 Jy/beam ! Clean residual mean=0.000093 rms=0.001240 Jy/beam ! Combined flux in latest and established models = 0.504697 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 123 components and 0.504697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112695Jy sigma=1.043557 ! Fit after self-cal, rms=0.112700Jy sigma=1.043506 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.99084e-05 Jy ! Component: 100 - total flux cleaned = -0.000150628 Jy ! Component: 150 - total flux cleaned = -0.000309465 Jy ! Component: 200 - total flux cleaned = -0.000458617 Jy ! Total flux subtracted in 200 components = -0.000458617 Jy ! Clean residual min=-0.003760 max=0.004447 Jy/beam ! Clean residual mean=0.000089 rms=0.001216 Jy/beam ! Combined flux in latest and established models = 0.504239 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 129 components and 0.504238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112657Jy sigma=1.043293 ! Fit after self-cal, rms=0.112658Jy sigma=1.043273 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.73 mas, bmaj=21.27 mas, bpa=14.79 degrees ! Estimated noise=1.29523 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.73 x 21.27 at 14.79 degrees (North through East) ! Clean map min=-0.005126 max=0.37753 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.697 mas, bmaj=18.98 mas, bpa=14.74 degrees ! Estimated noise=2.15188 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.335994 Jy ! Component: 100 - total flux cleaned = 0.412569 Jy ! Component: 150 - total flux cleaned = 0.442722 Jy ! Component: 200 - total flux cleaned = 0.462036 Jy ! Total flux subtracted in 200 components = 0.462036 Jy ! Clean residual min=-0.009014 max=0.011299 Jy/beam ! Clean residual mean=-0.000057 rms=0.002627 Jy/beam ! Combined flux in latest and established models = 0.462036 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.462036 Jy ! Inverting map and beam ! Estimated beam: bmin=3.73 mas, bmaj=21.27 mas, bpa=14.79 degrees ! Estimated noise=1.29523 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0194311 Jy ! Component: 100 - total flux cleaned = 0.0298333 Jy ! Component: 150 - total flux cleaned = 0.0361351 Jy ! Component: 200 - total flux cleaned = 0.0379617 Jy ! Total flux subtracted in 200 components = 0.0379617 Jy ! Clean residual min=-0.004829 max=0.004398 Jy/beam ! Clean residual mean=0.000034 rms=0.001231 Jy/beam ! Combined flux in latest and established models = 0.499998 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 88 components and 0.499998 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.694 mas, bmaj=37.52 mas, bpa=1.047 degrees ! Estimated noise=1.48401 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120422 Jy ! Component: 100 - total flux cleaned = 0.00148334 Jy ! Component: 150 - total flux cleaned = 0.0012809 Jy ! Component: 200 - total flux cleaned = 0.00121852 Jy ! Total flux subtracted in 200 components = 0.00121852 Jy ! Clean residual min=-0.003643 max=0.003513 Jy/beam ! Clean residual mean=0.000067 rms=0.001146 Jy/beam ! Combined flux in latest and established models = 0.501216 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.04326e-06 Jy ! Component: 100 - total flux cleaned = -5.63898e-05 Jy ! Component: 150 - total flux cleaned = -5.84916e-05 Jy ! Component: 200 - total flux cleaned = -6.0022e-05 Jy ! Total flux subtracted in 200 components = -6.0022e-05 Jy ! Clean residual min=-0.003611 max=0.003778 Jy/beam ! Clean residual mean=0.000067 rms=0.001124 Jy/beam ! Combined flux in latest and established models = 0.501156 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 112 components and 0.501157 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.73 mas, bmaj=21.27 mas, bpa=14.79 degrees ! Estimated noise=1.29523 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000148043 Jy ! Component: 100 - total flux cleaned = 0.000196851 Jy ! Component: 150 - total flux cleaned = 0.000295918 Jy ! Component: 200 - total flux cleaned = 0.000389809 Jy ! Total flux subtracted in 200 components = 0.000389809 Jy ! Clean residual min=-0.004082 max=0.004247 Jy/beam ! Clean residual mean=0.000044 rms=0.001070 Jy/beam ! Combined flux in latest and established models = 0.501546 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 128 components and 0.501546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112640Jy sigma=1.042792 ! Fit after self-cal, rms=0.112531Jy sigma=1.042146 wmodel J2316-4041_S_map.mod ! Writing 128 model components to file: J2316-4041_S_map.mod wobs J2316-4041_S_uvs.fits ! Writing UV FITS file: J2316-4041_S_uvs.fits wwins J2316-4041_S_map.win ! wwins: Wrote 2 windows to J2316-4041_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000507461 Jy ! Component: 100 - total flux cleaned = -0.00104515 Jy ! Component: 150 - total flux cleaned = -0.00154854 Jy ! Component: 200 - total flux cleaned = -0.00178904 Jy ! Component: 250 - total flux cleaned = -0.00167719 Jy ! Component: 300 - total flux cleaned = -0.00167779 Jy ! Component: 350 - total flux cleaned = -0.00167665 Jy ! Component: 400 - total flux cleaned = -0.0016761 Jy ! Component: 450 - total flux cleaned = -0.00167612 Jy ! Component: 500 - total flux cleaned = -0.00167649 Jy ! Component: 550 - total flux cleaned = -0.00177237 Jy ! Component: 600 - total flux cleaned = -0.00172477 Jy ! Component: 650 - total flux cleaned = -0.00181649 Jy ! Component: 700 - total flux cleaned = -0.00190647 Jy ! Component: 750 - total flux cleaned = -0.00203874 Jy ! Component: 800 - total flux cleaned = -0.00212457 Jy ! Component: 850 - total flux cleaned = -0.00216647 Jy ! Component: 900 - total flux cleaned = -0.00216686 Jy ! Component: 950 - total flux cleaned = -0.00216698 Jy ! Component: 1000 - total flux cleaned = -0.00208644 Jy ! Component: 1050 - total flux cleaned = -0.00208567 Jy ! Component: 1100 - total flux cleaned = -0.0019671 Jy ! Component: 1150 - total flux cleaned = -0.00192773 Jy ! Component: 1200 - total flux cleaned = -0.0018131 Jy ! Component: 1250 - total flux cleaned = -0.00181294 Jy ! Component: 1300 - total flux cleaned = -0.00166374 Jy ! Component: 1350 - total flux cleaned = -0.00155301 Jy ! Component: 1400 - total flux cleaned = -0.00140705 Jy ! Component: 1450 - total flux cleaned = -0.00129881 Jy ! Component: 1500 - total flux cleaned = -0.00104871 Jy ! Component: 1550 - total flux cleaned = -0.000801238 Jy ! Component: 1600 - total flux cleaned = -0.000661188 Jy ! Component: 1650 - total flux cleaned = -0.000488103 Jy ! Component: 1700 - total flux cleaned = -0.000248393 Jy ! Component: 1750 - total flux cleaned = -0.000112885 Jy ! Component: 1800 - total flux cleaned = 8.84433e-05 Jy ! Component: 1850 - total flux cleaned = 0.000321069 Jy ! Component: 1900 - total flux cleaned = 0.000518313 Jy ! Component: 1950 - total flux cleaned = 0.000713402 Jy ! Component: 2000 - total flux cleaned = 0.000874765 Jy ! Component: 2050 - total flux cleaned = 0.00106633 Jy ! Component: 2100 - total flux cleaned = 0.00125632 Jy ! Component: 2150 - total flux cleaned = 0.00150732 Jy ! Component: 2200 - total flux cleaned = 0.00178758 Jy ! Component: 2250 - total flux cleaned = 0.00200335 Jy ! Component: 2300 - total flux cleaned = 0.00221801 Jy ! Component: 2350 - total flux cleaned = 0.00240047 Jy ! Component: 2400 - total flux cleaned = 0.00273262 Jy ! Component: 2450 - total flux cleaned = 0.00300218 Jy ! Component: 2500 - total flux cleaned = 0.00324014 Jy ! Component: 2550 - total flux cleaned = 0.00335826 Jy ! Component: 2600 - total flux cleaned = 0.00350534 Jy ! Component: 2650 - total flux cleaned = 0.00368065 Jy ! Component: 2700 - total flux cleaned = 0.00385477 Jy ! Component: 2750 - total flux cleaned = 0.00402794 Jy ! Component: 2800 - total flux cleaned = 0.0042002 Jy ! Component: 2850 - total flux cleaned = 0.00437141 Jy ! Component: 2900 - total flux cleaned = 0.00454202 Jy ! Component: 2950 - total flux cleaned = 0.00471141 Jy ! Component: 3000 - total flux cleaned = 0.00493676 Jy ! Component: 3050 - total flux cleaned = 0.00518909 Jy ! Component: 3100 - total flux cleaned = 0.00532878 Jy ! Component: 3150 - total flux cleaned = 0.00546816 Jy ! Component: 3200 - total flux cleaned = 0.00566262 Jy ! Component: 3250 - total flux cleaned = 0.0059115 Jy ! Component: 3300 - total flux cleaned = 0.00610412 Jy ! Component: 3350 - total flux cleaned = 0.00626871 Jy ! Component: 3400 - total flux cleaned = 0.00648733 Jy ! Component: 3450 - total flux cleaned = 0.0066238 Jy ! Component: 3500 - total flux cleaned = 0.00684123 Jy ! Component: 3550 - total flux cleaned = 0.0069496 Jy ! Component: 3600 - total flux cleaned = 0.00708468 Jy ! Component: 3650 - total flux cleaned = 0.00724605 Jy ! Component: 3700 - total flux cleaned = 0.00740692 Jy ! Component: 3750 - total flux cleaned = 0.00756748 Jy ! Component: 3800 - total flux cleaned = 0.00767445 Jy ! Component: 3850 - total flux cleaned = 0.00778116 Jy ! Component: 3900 - total flux cleaned = 0.0079675 Jy ! Component: 3950 - total flux cleaned = 0.00802064 Jy ! Component: 4000 - total flux cleaned = 0.00817958 Jy ! Component: 4050 - total flux cleaned = 0.00833841 Jy ! Total flux subtracted in 4096 components = 0.00839101 Jy ! Clean residual min=-0.001679 max=0.001603 Jy/beam ! Clean residual mean=0.000016 rms=0.000493 Jy/beam ! Combined flux in latest and established models = 0.509937 Jy keep ! Adding 235 model components to the UV plane model. ! The established model now contains 363 components and 0.509937 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv118_uvs/J2316-4041_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.73 x 21.27 at 14.79 degrees (North through East) ! Clean map min=-0.0045978 max=0.40375 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv118_uvs/J2316-4041_S_map.fits wmodel /scr/pima/rv118_uvs/J2316-4041_S_map.mod ! Writing 363 model components to file: /scr/pima/rv118_uvs/J2316-4041_S_map.mod wobs /scr/pima/rv118_uvs/J2316-4041_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv118_uvs/J2316-4041_S_uvs.fits wwins /scr/pima/rv118_uvs/J2316-4041_S_map.win ! wwins: Wrote 3 windows to /scr/pima/rv118_uvs/J2316-4041_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.403753 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000489821 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.363951 0.363951 0.727901 1.4558 2.91161 5.82321 11.6464 23.2928 46.5857 93.1714 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.403 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 824.287 quit ! Quitting program ! Log file /scr/pima/rv118_uvs/J2316-4041_S_dfm.log closed on Sun Dec 10 00:12:26 2017