! Started logfile: /scr/pima/rv118_uvs/J2138-1810_S_dfm.log on Sun Dec 10 00:12:00 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.23275
obs     /scr/pima/rv118_uvs/J2138-1810_S_uva.fits
! Reading UV FITS file: /scr/pima/rv118_uvs/J2138-1810_S_uva.fits
! AN table 1: 74 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.878003 visibilities/baseline/integration-bin.
! Found source: J2138-1810
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23275e+09        8e+06          1        8e+06
!  02        2  2.26275e+09        8e+06          1        8e+06
!  03        3  2.35275e+09        8e+06          1        8e+06
!  04        4  2.37275e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 9356 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2138-1810_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.035724Jy  sigma=16.086152
! Fit after  self-cal, rms=0.888623Jy  sigma=13.507325
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.051 mas, bmaj=10.03 mas, bpa=21.36 degrees
! Estimated noise=0.93577 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0863699 Jy
! Component: 100  -  total flux cleaned = 0.137382 Jy
! Total flux subtracted in 100 components = 0.137382 Jy
! Clean residual min=-0.024465 max=0.035830 Jy/beam
! Clean residual mean=-0.000315 rms=0.008465 Jy/beam
! Combined flux in latest and established models = 0.137382 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 40 components and 0.137382 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.199961Jy  sigma=3.148445
! Fit after  self-cal, rms=0.198938Jy  sigma=3.136041
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.023 mas, bmaj=11.55 mas, bpa=18.31 degrees
! Estimated noise=0.49091 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0684216 Jy
! Component: 100  -  total flux cleaned = 0.110259 Jy
! Component: 150  -  total flux cleaned = 0.138457 Jy
! Component: 200  -  total flux cleaned = 0.158198 Jy
! Total flux subtracted in 200 components = 0.158198 Jy
! Clean residual min=-0.043058 max=0.053704 Jy/beam
! Clean residual mean=-0.000499 rms=0.012907 Jy/beam
! Combined flux in latest and established models = 0.29558 Jy
! Performing phase self-cal
! Adding 76 model components to the UV plane model.
! The established model now contains 98 components and 0.29558 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.173402Jy  sigma=2.696323
! Fit after  self-cal, rms=0.172059Jy  sigma=2.676039
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.023 x 11.55 at 18.31 degrees (North through East)
! Clean map  min=-0.042367  max=0.11416 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.10     HN        1.94     KP        0.74     
!   LA        0.93     NL        2.56     OV        1.39     PT        0.58     
!   SC        1.35     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.20     HN        1.62     KP        0.74     
!   LA        0.95     NL        2.34     OV        1.37     PT        0.58     
!   SC        1.46     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.27     FD        1.74     HN        1.31     KP        0.38     
!   LA        1.22     NL        1.50     OV        1.17     PT        0.61     
!   SC        0.92     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        1.30     HN        1.62     KP        0.83     
!   LA        0.87     NL        2.53     OV        1.62     PT        0.58     
!   SC        1.42     
! 
! 
! Fit before self-cal, rms=0.172059Jy  sigma=2.676039
! Fit after  self-cal, rms=0.194583Jy  sigma=2.111240
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.242 mas, bmaj=12.82 mas, bpa=19.65 degrees
! Estimated noise=0.568236 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-18, -10).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0555675 Jy
! Component: 100  -  total flux cleaned = 0.0858394 Jy
! Component: 150  -  total flux cleaned = 0.107445 Jy
! Component: 200  -  total flux cleaned = 0.123307 Jy
! Total flux subtracted in 200 components = 0.123307 Jy
! Clean residual min=-0.023868 max=0.027216 Jy/beam
! Clean residual mean=-0.000064 rms=0.007910 Jy/beam
! Combined flux in latest and established models = 0.418888 Jy
! Performing phase self-cal
! Adding 96 model components to the UV plane model.
! The established model now contains 187 components and 0.418888 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.177878Jy  sigma=1.722248
! Fit after  self-cal, rms=0.178534Jy  sigma=1.654197
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.178534Jy  sigma=1.654197
! Fit after  self-cal, rms=0.185926Jy  sigma=1.448749
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.174 mas, bmaj=12.51 mas, bpa=20.18 degrees
! Estimated noise=0.541965 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0191987 Jy
! Component: 100  -  total flux cleaned = 0.0272754 Jy
! Component: 150  -  total flux cleaned = 0.0302245 Jy
! Component: 200  -  total flux cleaned = 0.0327567 Jy
! Total flux subtracted in 200 components = 0.0327567 Jy
! Clean residual min=-0.015481 max=0.018915 Jy/beam
! Clean residual mean=-0.000039 rms=0.004758 Jy/beam
! Combined flux in latest and established models = 0.451644 Jy
selfcal
! Performing phase self-cal
! Adding 68 model components to the UV plane model.
! The established model now contains 242 components and 0.451644 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.183043Jy  sigma=1.361316
! Fit after  self-cal, rms=0.181521Jy  sigma=1.340392
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0082935 Jy
! Component: 100  -  total flux cleaned = 0.0120196 Jy
! Component: 150  -  total flux cleaned = 0.0137078 Jy
! Component: 200  -  total flux cleaned = 0.0154754 Jy
! Total flux subtracted in 200 components = 0.0154754 Jy
! Clean residual min=-0.017683 max=0.016375 Jy/beam
! Clean residual mean=-0.000013 rms=0.004304 Jy/beam
! Combined flux in latest and established models = 0.46712 Jy
! Performing phase self-cal
! Adding 51 model components to the UV plane model.
! The established model now contains 282 components and 0.46712 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.180225Jy  sigma=1.313845
! Fit after  self-cal, rms=0.179385Jy  sigma=1.308089
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.179385Jy  sigma=1.308089
! Fit after  self-cal, rms=0.161612Jy  sigma=1.268559
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.125 mas, bmaj=12.49 mas, bpa=20.45 degrees
! Estimated noise=0.517672 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00577279 Jy
! Component: 100  -  total flux cleaned = 0.0102821 Jy
! Component: 150  -  total flux cleaned = 0.0128164 Jy
! Component: 200  -  total flux cleaned = 0.0146818 Jy
! Total flux subtracted in 200 components = 0.0146818 Jy
! Clean residual min=-0.012099 max=0.013754 Jy/beam
! Clean residual mean=-0.000019 rms=0.003359 Jy/beam
! Combined flux in latest and established models = 0.481802 Jy
selfcal
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 308 components and 0.481801 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.160520Jy  sigma=1.234656
! Fit after  self-cal, rms=0.159572Jy  sigma=1.226828
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00315286 Jy
! Component: 100  -  total flux cleaned = 0.00571388 Jy
! Component: 150  -  total flux cleaned = 0.00744027 Jy
! Component: 200  -  total flux cleaned = 0.0085071 Jy
! Total flux subtracted in 200 components = 0.0085071 Jy
! Clean residual min=-0.012855 max=0.012409 Jy/beam
! Clean residual mean=-0.000005 rms=0.003158 Jy/beam
! Combined flux in latest and established models = 0.490309 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 324 components and 0.490309 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.159016Jy  sigma=1.213791
! Fit after  self-cal, rms=0.158703Jy  sigma=1.211243
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.158703Jy  sigma=1.211243
! Fit after  self-cal, rms=0.142456Jy  sigma=1.201780
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.905 mas, bmaj=18 mas, bpa=14.13 degrees
! Estimated noise=0.531414 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00777276 Jy
! Component: 100  -  total flux cleaned = 0.00939649 Jy
! Component: 150  -  total flux cleaned = 0.0104663 Jy
! Component: 200  -  total flux cleaned = 0.0112327 Jy
! Total flux subtracted in 200 components = 0.0112327 Jy
! Clean residual min=-0.012453 max=0.014644 Jy/beam
! Clean residual mean=0.000000 rms=0.003997 Jy/beam
! Combined flux in latest and established models = 0.501541 Jy
selfcal
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 353 components and 0.501541 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.142069Jy  sigma=1.191838
! Fit after  self-cal, rms=0.141705Jy  sigma=1.188482
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00195273 Jy
! Component: 100  -  total flux cleaned = 0.00286879 Jy
! Component: 150  -  total flux cleaned = 0.0030854 Jy
! Component: 200  -  total flux cleaned = 0.00347935 Jy
! Total flux subtracted in 200 components = 0.00347935 Jy
! Clean residual min=-0.012841 max=0.013718 Jy/beam
! Clean residual mean=0.000013 rms=0.003866 Jy/beam
! Combined flux in latest and established models = 0.505021 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 367 components and 0.505021 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.141503Jy  sigma=1.183620
! Fit after  self-cal, rms=0.141436Jy  sigma=1.182612
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.095 mas, bmaj=12.56 mas, bpa=20.63 degrees
! Estimated noise=0.502482 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.095 x 12.56 at 20.63 degrees (North through East)
! Clean map  min=-0.010227  max=0.10515 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.928 mas, bmaj=10.81 mas, bpa=23.11 degrees
! Estimated noise=0.965834 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0861626 Jy
! Component: 100  -  total flux cleaned = 0.137894 Jy
! Component: 150  -  total flux cleaned = 0.17865 Jy
! Component: 200  -  total flux cleaned = 0.212865 Jy
! Total flux subtracted in 200 components = 0.212865 Jy
! Clean residual min=-0.019132 max=0.022763 Jy/beam
! Clean residual mean=-0.000187 rms=0.006332 Jy/beam
! Combined flux in latest and established models = 0.212866 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 72 model components to the UV plane model.
! The established model now contains 72 components and 0.212866 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.095 mas, bmaj=12.56 mas, bpa=20.63 degrees
! Estimated noise=0.502482 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0549451 Jy
! Component: 100  -  total flux cleaned = 0.0965142 Jy
! Component: 150  -  total flux cleaned = 0.129701 Jy
! Component: 200  -  total flux cleaned = 0.156619 Jy
! Total flux subtracted in 200 components = 0.156619 Jy
! Clean residual min=-0.017234 max=0.020679 Jy/beam
! Clean residual mean=-0.000194 rms=0.005473 Jy/beam
! Combined flux in latest and established models = 0.369485 Jy
! Adding 123 model components to the UV plane model.
! The established model now contains 186 components and 0.369485 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.905 mas, bmaj=18 mas, bpa=14.13 degrees
! Estimated noise=0.531414 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0332986 Jy
! Component: 100  -  total flux cleaned = 0.0577672 Jy
! Component: 150  -  total flux cleaned = 0.0762253 Jy
! Component: 200  -  total flux cleaned = 0.0903062 Jy
! Total flux subtracted in 200 components = 0.0903062 Jy
! Clean residual min=-0.015486 max=0.016372 Jy/beam
! Clean residual mean=-0.000096 rms=0.004460 Jy/beam
! Combined flux in latest and established models = 0.459791 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0108264 Jy
! Component: 100  -  total flux cleaned = 0.0192174 Jy
! Component: 150  -  total flux cleaned = 0.0257618 Jy
! Component: 200  -  total flux cleaned = 0.0308901 Jy
! Total flux subtracted in 200 components = 0.0308901 Jy
! Clean residual min=-0.014025 max=0.014290 Jy/beam
! Clean residual mean=-0.000027 rms=0.003856 Jy/beam
! Combined flux in latest and established models = 0.490682 Jy
! Adding 111 model components to the UV plane model.
! The established model now contains 271 components and 0.490681 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.095 mas, bmaj=12.56 mas, bpa=20.63 degrees
! Estimated noise=0.502482 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00394123 Jy
! Component: 100  -  total flux cleaned = 0.0060057 Jy
! Component: 150  -  total flux cleaned = 0.00638666 Jy
! Component: 200  -  total flux cleaned = 0.00638415 Jy
! Total flux subtracted in 200 components = 0.00638415 Jy
! Clean residual min=-0.012049 max=0.010518 Jy/beam
! Clean residual mean=-0.000014 rms=0.002794 Jy/beam
! Combined flux in latest and established models = 0.497066 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 294 components and 0.497066 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.142858Jy  sigma=1.201556
! Fit after  self-cal, rms=0.142585Jy  sigma=1.189403
wmodel J2138-1810_S_map.mod
! Writing 294 model components to file: J2138-1810_S_map.mod
wobs   J2138-1810_S_uvs.fits
! Writing UV FITS file: J2138-1810_S_uvs.fits
wwins  J2138-1810_S_map.win
! wwins: Wrote 2 windows to J2138-1810_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00219965 Jy
! Component: 100  -  total flux cleaned = -0.00170183 Jy
! Component: 150  -  total flux cleaned = -0.0020114 Jy
! Component: 200  -  total flux cleaned = -0.00245148 Jy
! Component: 250  -  total flux cleaned = -0.00245451 Jy
! Component: 300  -  total flux cleaned = -0.0024539 Jy
! Component: 350  -  total flux cleaned = -0.00232484 Jy
! Component: 400  -  total flux cleaned = -0.00208116 Jy
! Component: 450  -  total flux cleaned = -0.00208309 Jy
! Component: 500  -  total flux cleaned = -0.00219724 Jy
! Component: 550  -  total flux cleaned = -0.00241591 Jy
! Component: 600  -  total flux cleaned = -0.00230465 Jy
! Component: 650  -  total flux cleaned = -0.00230541 Jy
! Component: 700  -  total flux cleaned = -0.00250978 Jy
! Component: 750  -  total flux cleaned = -0.00300752 Jy
! Component: 800  -  total flux cleaned = -0.00329629 Jy
! Component: 850  -  total flux cleaned = -0.00367185 Jy
! Component: 900  -  total flux cleaned = -0.00376367 Jy
! Component: 950  -  total flux cleaned = -0.0042167 Jy
! Component: 1000  -  total flux cleaned = -0.0045709 Jy
! Component: 1050  -  total flux cleaned = -0.00483158 Jy
! Component: 1100  -  total flux cleaned = -0.00534242 Jy
! Component: 1150  -  total flux cleaned = -0.00550881 Jy
! Component: 1200  -  total flux cleaned = -0.00583544 Jy
! Component: 1250  -  total flux cleaned = -0.00639557 Jy
! Component: 1300  -  total flux cleaned = -0.00647528 Jy
! Component: 1350  -  total flux cleaned = -0.00686295 Jy
! Component: 1400  -  total flux cleaned = -0.00746992 Jy
! Component: 1450  -  total flux cleaned = -0.00806415 Jy
! Component: 1500  -  total flux cleaned = -0.00842955 Jy
! Component: 1550  -  total flux cleaned = -0.00864582 Jy
! Component: 1600  -  total flux cleaned = -0.00921274 Jy
! Component: 1650  -  total flux cleaned = -0.00928261 Jy
! Component: 1700  -  total flux cleaned = -0.00962611 Jy
! Component: 1750  -  total flux cleaned = -0.00983031 Jy
! Component: 1800  -  total flux cleaned = -0.0101653 Jy
! Component: 1850  -  total flux cleaned = -0.010691 Jy
! Component: 1900  -  total flux cleaned = -0.0110799 Jy
! Component: 1950  -  total flux cleaned = -0.0114632 Jy
! Component: 2000  -  total flux cleaned = -0.0117143 Jy
! Component: 2050  -  total flux cleaned = -0.0120238 Jy
! Component: 2100  -  total flux cleaned = -0.0121472 Jy
! Component: 2150  -  total flux cleaned = -0.0125717 Jy
! Component: 2200  -  total flux cleaned = -0.0129294 Jy
! Component: 2250  -  total flux cleaned = -0.0132817 Jy
! Component: 2300  -  total flux cleaned = -0.0133987 Jy
! Component: 2350  -  total flux cleaned = -0.0134564 Jy
! Component: 2400  -  total flux cleaned = -0.0137973 Jy
! Component: 2450  -  total flux cleaned = -0.0140767 Jy
! Component: 2500  -  total flux cleaned = -0.0140769 Jy
! Component: 2550  -  total flux cleaned = -0.0142962 Jy
! Component: 2600  -  total flux cleaned = -0.0146727 Jy
! Component: 2650  -  total flux cleaned = -0.0148853 Jy
! Component: 2700  -  total flux cleaned = -0.0150949 Jy
! Component: 2750  -  total flux cleaned = -0.0151463 Jy
! Component: 2800  -  total flux cleaned = -0.0154035 Jy
! Component: 2850  -  total flux cleaned = -0.0154042 Jy
! Component: 2900  -  total flux cleaned = -0.0155555 Jy
! Component: 2950  -  total flux cleaned = -0.0158048 Jy
! Component: 3000  -  total flux cleaned = -0.0158544 Jy
! Component: 3050  -  total flux cleaned = -0.0161959 Jy
! Component: 3100  -  total flux cleaned = -0.0161956 Jy
! Component: 3150  -  total flux cleaned = -0.0163396 Jy
! Component: 3200  -  total flux cleaned = -0.0163398 Jy
! Component: 3250  -  total flux cleaned = -0.0165278 Jy
! Component: 3300  -  total flux cleaned = -0.0164816 Jy
! Component: 3350  -  total flux cleaned = -0.0165741 Jy
! Component: 3400  -  total flux cleaned = -0.0166654 Jy
! Component: 3450  -  total flux cleaned = -0.0165295 Jy
! Component: 3500  -  total flux cleaned = -0.0166638 Jy
! Component: 3550  -  total flux cleaned = -0.0167085 Jy
! Component: 3600  -  total flux cleaned = -0.0166206 Jy
! Component: 3650  -  total flux cleaned = -0.0167082 Jy
! Component: 3700  -  total flux cleaned = -0.0168382 Jy
! Component: 3750  -  total flux cleaned = -0.0168378 Jy
! Component: 3800  -  total flux cleaned = -0.0168802 Jy
! Component: 3850  -  total flux cleaned = -0.0167531 Jy
! Component: 3900  -  total flux cleaned = -0.016837 Jy
! Component: 3950  -  total flux cleaned = -0.0168785 Jy
! Component: 4000  -  total flux cleaned = -0.016714 Jy
! Component: 4050  -  total flux cleaned = -0.0166732 Jy
! Total flux subtracted in 4096 components = -0.0165915 Jy
! Clean residual min=-0.002364 max=0.002231 Jy/beam
! Clean residual mean=-0.000005 rms=0.000893 Jy/beam
! Combined flux in latest and established models = 0.480474 Jy
keep
! Adding 448 model components to the UV plane model.
! The established model now contains 742 components and 0.480474 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv118_uvs/J2138-1810_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.095 x 12.56 at 20.63 degrees (North through East)
! Clean map  min=-0.0072808  max=0.10376 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv118_uvs/J2138-1810_S_map.fits
wmodel /scr/pima/rv118_uvs/J2138-1810_S_map.mod
! Writing 742 model components to file: /scr/pima/rv118_uvs/J2138-1810_S_map.mod
wobs   /scr/pima/rv118_uvs/J2138-1810_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv118_uvs/J2138-1810_S_uvs.fits
wwins  /scr/pima/rv118_uvs/J2138-1810_S_map.win
! wwins: Wrote 3 windows to /scr/pima/rv118_uvs/J2138-1810_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.103759 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000876386 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.53392 2.53392 5.06783 10.1357 20.2713 40.5427 81.0853
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0026 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.103 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  118.393 
quit
! Quitting program
! Log file /scr/pima/rv118_uvs/J2138-1810_S_dfm.log closed on Sun Dec 10 00:12:04 2017