! Started logfile: /scr/pima/rv118_uvs/J1951-0509_S_dfm.log on Sun Dec 10 00:11:39 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.23275
obs     /scr/pima/rv118_uvs/J1951-0509_S_uva.fits
! Reading UV FITS file: /scr/pima/rv118_uvs/J1951-0509_S_uva.fits
! AN table 1: 44 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.989268 visibilities/baseline/integration-bin.
! Found source: J1951-0509
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23275e+09        8e+06          1        8e+06
!  02        2  2.26275e+09        8e+06          1        8e+06
!  03        3  2.35275e+09        8e+06          1        8e+06
!  04        4  2.37275e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 6268 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1951-0509_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.016977Jy  sigma=18.059279
! Fit after  self-cal, rms=0.869677Jy  sigma=15.507806
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.429 mas, bmaj=9.239 mas, bpa=16.07 degrees
! Estimated noise=0.910852 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.101123 Jy
! Component: 100  -  total flux cleaned = 0.12363 Jy
! Total flux subtracted in 100 components = 0.12363 Jy
! Clean residual min=-0.005915 max=0.008422 Jy/beam
! Clean residual mean=-0.000005 rms=0.001775 Jy/beam
! Combined flux in latest and established models = 0.12363 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.12363 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077768Jy  sigma=1.214726
! Fit after  self-cal, rms=0.077764Jy  sigma=1.214625
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.183 mas, bmaj=10.43 mas, bpa=16.15 degrees
! Estimated noise=0.514496 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0097494 Jy
! Component: 100  -  total flux cleaned = 0.0151654 Jy
! Component: 150  -  total flux cleaned = 0.0183706 Jy
! Component: 200  -  total flux cleaned = 0.0193244 Jy
! Total flux subtracted in 200 components = 0.0193244 Jy
! Clean residual min=-0.004705 max=0.005430 Jy/beam
! Clean residual mean=-0.000007 rms=0.001315 Jy/beam
! Combined flux in latest and established models = 0.142954 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 26 components and 0.142954 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076315Jy  sigma=1.193726
! Fit after  self-cal, rms=0.076297Jy  sigma=1.193430
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.183 x 10.43 at 16.15 degrees (North through East)
! Clean map  min=-0.0044952  max=0.12912 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.04     HN        1.04     KP        1.07     
!   LA        1.05     NL        1.03     OV        1.03     PT        1.03     
!   SC        1.13     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.03     KP        1.06     
!   LA        1.04     NL        1.01     OV        1.00     PT        1.04     
!   SC        1.17     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.05     HN        1.08     KP        0.57     
!   LA        1.07     NL        0.73     OV        0.99     PT        1.05     
!   SC        0.67     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.05     KP        1.06     
!   LA        1.06     NL        1.05     OV        1.04     PT        1.03     
!   SC        1.11     
! 
! 
! Fit before self-cal, rms=0.076297Jy  sigma=1.193430
! Fit after  self-cal, rms=0.059364Jy  sigma=1.049454
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.143 mas, bmaj=10.41 mas, bpa=16.52 degrees
! Estimated noise=0.512379 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000716002 Jy
! Component: 100  -  total flux cleaned = 0.000563559 Jy
! Component: 150  -  total flux cleaned = 0.000524212 Jy
! Component: 200  -  total flux cleaned = 0.000454561 Jy
! Total flux subtracted in 200 components = 0.000454561 Jy
! Clean residual min=-0.002398 max=0.002755 Jy/beam
! Clean residual mean=-0.000000 rms=0.000632 Jy/beam
! Combined flux in latest and established models = 0.143409 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 39 components and 0.143409 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059281Jy  sigma=1.048111
! Fit after  self-cal, rms=0.059421Jy  sigma=1.045999
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059421Jy  sigma=1.045999
! Fit after  self-cal, rms=0.059108Jy  sigma=1.040666
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.136 mas, bmaj=10.4 mas, bpa=16.56 degrees
! Estimated noise=0.512172 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000206641 Jy
! Component: 100  -  total flux cleaned = -0.00027129 Jy
! Component: 150  -  total flux cleaned = -0.000324829 Jy
! Component: 200  -  total flux cleaned = -0.00037004 Jy
! Total flux subtracted in 200 components = -0.00037004 Jy
! Clean residual min=-0.002378 max=0.002210 Jy/beam
! Clean residual mean=-0.000003 rms=0.000531 Jy/beam
! Combined flux in latest and established models = 0.143039 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 44 components and 0.143039 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059080Jy  sigma=1.040139
! Fit after  self-cal, rms=0.059085Jy  sigma=1.040064
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.67914e-05 Jy
! Component: 100  -  total flux cleaned = -8.30577e-05 Jy
! Component: 150  -  total flux cleaned = -8.23524e-05 Jy
! Component: 200  -  total flux cleaned = -8.24059e-05 Jy
! Total flux subtracted in 200 components = -8.24059e-05 Jy
! Clean residual min=-0.002358 max=0.002206 Jy/beam
! Clean residual mean=-0.000003 rms=0.000528 Jy/beam
! Combined flux in latest and established models = 0.142956 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 53 components and 0.142956 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059076Jy  sigma=1.039893
! Fit after  self-cal, rms=0.059076Jy  sigma=1.039886
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059076Jy  sigma=1.039886
! Fit after  self-cal, rms=0.059011Jy  sigma=1.039785
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.136 mas, bmaj=10.4 mas, bpa=16.59 degrees
! Estimated noise=0.512097 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000471341 Jy
! Component: 100  -  total flux cleaned = -0.000486569 Jy
! Component: 150  -  total flux cleaned = -0.000516027 Jy
! Component: 200  -  total flux cleaned = -0.000543294 Jy
! Total flux subtracted in 200 components = -0.000543294 Jy
! Clean residual min=-0.002290 max=0.002182 Jy/beam
! Clean residual mean=-0.000003 rms=0.000521 Jy/beam
! Combined flux in latest and established models = 0.142413 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 61 components and 0.142413 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059002Jy  sigma=1.039624
! Fit after  self-cal, rms=0.059001Jy  sigma=1.039618
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.33512e-05 Jy
! Component: 100  -  total flux cleaned = -8.65958e-05 Jy
! Component: 150  -  total flux cleaned = -9.72988e-05 Jy
! Component: 200  -  total flux cleaned = -0.000117207 Jy
! Total flux subtracted in 200 components = -0.000117207 Jy
! Clean residual min=-0.002271 max=0.002172 Jy/beam
! Clean residual mean=-0.000003 rms=0.000520 Jy/beam
! Combined flux in latest and established models = 0.142296 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 63 components and 0.142296 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058997Jy  sigma=1.039550
! Fit after  self-cal, rms=0.058997Jy  sigma=1.039545
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058997Jy  sigma=1.039545
! Fit after  self-cal, rms=0.058984Jy  sigma=1.039491
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.934 mas, bmaj=13.22 mas, bpa=5.556 degrees
! Estimated noise=0.589649 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000612666 Jy
! Component: 100  -  total flux cleaned = -0.000674636 Jy
! Component: 150  -  total flux cleaned = -0.000704918 Jy
! Component: 200  -  total flux cleaned = -0.000723261 Jy
! Total flux subtracted in 200 components = -0.000723261 Jy
! Clean residual min=-0.002214 max=0.002202 Jy/beam
! Clean residual mean=-0.000005 rms=0.000594 Jy/beam
! Combined flux in latest and established models = 0.141573 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 79 components and 0.141573 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058979Jy  sigma=1.039425
! Fit after  self-cal, rms=0.058979Jy  sigma=1.039411
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.83969e-05 Jy
! Component: 100  -  total flux cleaned = -6.81145e-05 Jy
! Component: 150  -  total flux cleaned = -6.79673e-05 Jy
! Component: 200  -  total flux cleaned = -8.17433e-05 Jy
! Total flux subtracted in 200 components = -8.17433e-05 Jy
! Clean residual min=-0.002191 max=0.002197 Jy/beam
! Clean residual mean=-0.000005 rms=0.000592 Jy/beam
! Combined flux in latest and established models = 0.141491 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 88 components and 0.141491 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058978Jy  sigma=1.039398
! Fit after  self-cal, rms=0.058978Jy  sigma=1.039392
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.135 mas, bmaj=10.41 mas, bpa=16.6 degrees
! Estimated noise=0.512156 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.135 x 10.41 at 16.6 degrees (North through East)
! Clean map  min=-0.002184  max=0.13041 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.389 mas, bmaj=9.268 mas, bpa=16.57 degrees
! Estimated noise=0.916345 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.101625 Jy
! Component: 100  -  total flux cleaned = 0.124196 Jy
! Component: 150  -  total flux cleaned = 0.132511 Jy
! Component: 200  -  total flux cleaned = 0.137002 Jy
! Total flux subtracted in 200 components = 0.137002 Jy
! Clean residual min=-0.003793 max=0.003565 Jy/beam
! Clean residual mean=-0.000003 rms=0.000823 Jy/beam
! Combined flux in latest and established models = 0.137002 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.137002 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.135 mas, bmaj=10.41 mas, bpa=16.6 degrees
! Estimated noise=0.512156 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-7.5, -19).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.002976 Jy
! Component: 100  -  total flux cleaned = 0.00478089 Jy
! Component: 150  -  total flux cleaned = 0.0055274 Jy
! Component: 200  -  total flux cleaned = 0.00574414 Jy
! Total flux subtracted in 200 components = 0.00574414 Jy
! Clean residual min=-0.002350 max=0.002026 Jy/beam
! Clean residual mean=-0.000003 rms=0.000507 Jy/beam
! Combined flux in latest and established models = 0.142746 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 36 components and 0.142746 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.934 mas, bmaj=13.22 mas, bpa=5.556 degrees
! Estimated noise=0.589649 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000627633 Jy
! Component: 100  -  total flux cleaned = 0.000764492 Jy
! Component: 150  -  total flux cleaned = 0.000790395 Jy
! Component: 200  -  total flux cleaned = 0.000790333 Jy
! Total flux subtracted in 200 components = 0.000790333 Jy
! Clean residual min=-0.001956 max=0.001921 Jy/beam
! Clean residual mean=-0.000005 rms=0.000543 Jy/beam
! Combined flux in latest and established models = 0.143537 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.41401e-07 Jy
! Component: 100  -  total flux cleaned = 2.12504e-05 Jy
! Component: 150  -  total flux cleaned = 2.07233e-05 Jy
! Component: 200  -  total flux cleaned = 2.75396e-06 Jy
! Total flux subtracted in 200 components = 2.75396e-06 Jy
! Clean residual min=-0.001864 max=0.001837 Jy/beam
! Clean residual mean=-0.000005 rms=0.000530 Jy/beam
! Combined flux in latest and established models = 0.143539 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 74 components and 0.143539 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.135 mas, bmaj=10.41 mas, bpa=16.6 degrees
! Estimated noise=0.512156 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000163 Jy
! Component: 100  -  total flux cleaned = -0.00013024 Jy
! Component: 150  -  total flux cleaned = -7.6999e-05 Jy
! Component: 200  -  total flux cleaned = -0.000101012 Jy
! Total flux subtracted in 200 components = -0.000101012 Jy
! Clean residual min=-0.002030 max=0.001996 Jy/beam
! Clean residual mean=-0.000003 rms=0.000480 Jy/beam
! Combined flux in latest and established models = 0.143438 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 96 components and 0.143438 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058920Jy  sigma=1.038563
! Fit after  self-cal, rms=0.058908Jy  sigma=1.038294
wmodel J1951-0509_S_map.mod
! Writing 96 model components to file: J1951-0509_S_map.mod
wobs   J1951-0509_S_uvs.fits
! Writing UV FITS file: J1951-0509_S_uvs.fits
wwins  J1951-0509_S_map.win
! wwins: Wrote 2 windows to J1951-0509_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000291399 Jy
! Component: 100  -  total flux cleaned = -0.000512464 Jy
! Component: 150  -  total flux cleaned = -0.000752048 Jy
! Component: 200  -  total flux cleaned = -0.000838207 Jy
! Component: 250  -  total flux cleaned = -0.00103197 Jy
! Component: 300  -  total flux cleaned = -0.00113782 Jy
! Component: 350  -  total flux cleaned = -0.00121508 Jy
! Component: 400  -  total flux cleaned = -0.00128928 Jy
! Component: 450  -  total flux cleaned = -0.00138541 Jy
! Component: 500  -  total flux cleaned = -0.00147949 Jy
! Component: 550  -  total flux cleaned = -0.00154854 Jy
! Component: 600  -  total flux cleaned = -0.00159369 Jy
! Component: 650  -  total flux cleaned = -0.00157206 Jy
! Component: 700  -  total flux cleaned = -0.0016369 Jy
! Component: 750  -  total flux cleaned = -0.00157388 Jy
! Component: 800  -  total flux cleaned = -0.00159505 Jy
! Component: 850  -  total flux cleaned = -0.0016357 Jy
! Component: 900  -  total flux cleaned = -0.00163577 Jy
! Component: 950  -  total flux cleaned = -0.00163624 Jy
! Component: 1000  -  total flux cleaned = -0.00173293 Jy
! Component: 1050  -  total flux cleaned = -0.00177127 Jy
! Component: 1100  -  total flux cleaned = -0.00186439 Jy
! Component: 1150  -  total flux cleaned = -0.00188234 Jy
! Component: 1200  -  total flux cleaned = -0.0019361 Jy
! Component: 1250  -  total flux cleaned = -0.00190068 Jy
! Component: 1300  -  total flux cleaned = -0.00190063 Jy
! Component: 1350  -  total flux cleaned = -0.00190061 Jy
! Component: 1400  -  total flux cleaned = -0.00188394 Jy
! Component: 1450  -  total flux cleaned = -0.00193424 Jy
! Component: 1500  -  total flux cleaned = -0.00191753 Jy
! Component: 1550  -  total flux cleaned = -0.00190145 Jy
! Component: 1600  -  total flux cleaned = -0.00185326 Jy
! Component: 1650  -  total flux cleaned = -0.00177377 Jy
! Component: 1700  -  total flux cleaned = -0.00175807 Jy
! Component: 1750  -  total flux cleaned = -0.00177348 Jy
! Component: 1800  -  total flux cleaned = -0.00174275 Jy
! Component: 1850  -  total flux cleaned = -0.00168208 Jy
! Component: 1900  -  total flux cleaned = -0.00174234 Jy
! Component: 1950  -  total flux cleaned = -0.00175712 Jy
! Component: 2000  -  total flux cleaned = -0.0017131 Jy
! Component: 2050  -  total flux cleaned = -0.00165483 Jy
! Component: 2100  -  total flux cleaned = -0.00165514 Jy
! Component: 2150  -  total flux cleaned = -0.00166943 Jy
! Component: 2200  -  total flux cleaned = -0.00162682 Jy
! Component: 2250  -  total flux cleaned = -0.00155665 Jy
! Component: 2300  -  total flux cleaned = -0.00152903 Jy
! Component: 2350  -  total flux cleaned = -0.00152913 Jy
! Component: 2400  -  total flux cleaned = -0.00146083 Jy
! Component: 2450  -  total flux cleaned = -0.00144713 Jy
! Component: 2500  -  total flux cleaned = -0.00135289 Jy
! Component: 2550  -  total flux cleaned = -0.00127298 Jy
! Component: 2600  -  total flux cleaned = -0.00129938 Jy
! Component: 2650  -  total flux cleaned = -0.00123367 Jy
! Component: 2700  -  total flux cleaned = -0.00115566 Jy
! Component: 2750  -  total flux cleaned = -0.00115579 Jy
! Component: 2800  -  total flux cleaned = -0.0011431 Jy
! Component: 2850  -  total flux cleaned = -0.00109218 Jy
! Component: 2900  -  total flux cleaned = -0.00106704 Jy
! Component: 2950  -  total flux cleaned = -0.0010544 Jy
! Component: 3000  -  total flux cleaned = -0.00104188 Jy
! Component: 3050  -  total flux cleaned = -0.00102951 Jy
! Component: 3100  -  total flux cleaned = -0.00100503 Jy
! Component: 3150  -  total flux cleaned = -0.000992835 Jy
! Component: 3200  -  total flux cleaned = -0.00101692 Jy
! Component: 3250  -  total flux cleaned = -0.000944776 Jy
! Component: 3300  -  total flux cleaned = -0.000897122 Jy
! Component: 3350  -  total flux cleaned = -0.000932812 Jy
! Component: 3400  -  total flux cleaned = -0.000909181 Jy
! Component: 3450  -  total flux cleaned = -0.000862441 Jy
! Component: 3500  -  total flux cleaned = -0.000920433 Jy
! Component: 3550  -  total flux cleaned = -0.000851178 Jy
! Component: 3600  -  total flux cleaned = -0.000851143 Jy
! Component: 3650  -  total flux cleaned = -0.000805631 Jy
! Component: 3700  -  total flux cleaned = -0.00080573 Jy
! Component: 3750  -  total flux cleaned = -0.000850757 Jy
! Component: 3800  -  total flux cleaned = -0.000794795 Jy
! Component: 3850  -  total flux cleaned = -0.000816974 Jy
! Component: 3900  -  total flux cleaned = -0.000772845 Jy
! Component: 3950  -  total flux cleaned = -0.000761996 Jy
! Component: 4000  -  total flux cleaned = -0.000751078 Jy
! Component: 4050  -  total flux cleaned = -0.000751072 Jy
! Total flux subtracted in 4096 components = -0.000783433 Jy
! Clean residual min=-0.000605 max=0.000709 Jy/beam
! Clean residual mean=-0.000001 rms=0.000209 Jy/beam
! Combined flux in latest and established models = 0.142655 Jy
keep
! Adding 286 model components to the UV plane model.
! The established model now contains 382 components and 0.142655 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv118_uvs/J1951-0509_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.135 x 10.41 at 16.6 degrees (North through East)
! Clean map  min=-0.0011518  max=0.13056 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv118_uvs/J1951-0509_S_map.fits
wmodel /scr/pima/rv118_uvs/J1951-0509_S_map.mod
! Writing 382 model components to file: /scr/pima/rv118_uvs/J1951-0509_S_map.mod
wobs   /scr/pima/rv118_uvs/J1951-0509_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv118_uvs/J1951-0509_S_uvs.fits
wwins  /scr/pima/rv118_uvs/J1951-0509_S_map.win
! wwins: Wrote 3 windows to /scr/pima/rv118_uvs/J1951-0509_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.130565 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000208076 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.478098 0.478098 0.956196 1.91239 3.82479 7.64957 15.2991 30.5983 61.1966
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.13 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  627.486 
quit
! Quitting program
! Log file /scr/pima/rv118_uvs/J1951-0509_S_dfm.log closed on Sun Dec 10 00:11:43 2017