! Started logfile: /scr/pima/rv118_uvs/J1632+8232_X_dfm.log on Sun Dec 10 00:10:22 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv118_uvs/J1632+8232_X_uva.fits ! Reading UV FITS file: /scr/pima/rv118_uvs/J1632+8232_X_uva.fits ! AN table 1: 10 integrations on 6 of 6 possible baselines. ! AN table 2: 49 integrations on 45 of 45 possible baselines. ! AN table 3: 23 integrations on 6 of 6 possible baselines. ! AN table 4: 6 integrations on 3 of 3 possible baselines. ! AN table 5: 22 integrations on 10 of 10 possible baselines. ! AN table 6: 4 integrations on 6 of 6 possible baselines. ! AN table 7: 8 integrations on 1 of 1 possible baselines. ! AN table 8: 8 integrations on 36 of 36 possible baselines. ! AN table 9: 6 integrations on 6 of 6 possible baselines. ! AN table 10: 54 integrations on 3 of 3 possible baselines. ! Apparent sampling: 0.524533 visibilities/baseline/integration-bin. ! Found source: J1632+8232 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 6628 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1632+8232_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 159 telescope corrections were flagged in sub-array 2. ! A total of 56 telescope corrections were flagged in sub-array 3. ! A total of 62 telescope corrections were flagged in sub-array 5. ! A total of 16 telescope corrections were flagged in sub-array 7. ! A total of 21 telescope corrections were flagged in sub-array 8. ! A total of 2 telescope corrections were flagged in sub-array 9. ! A total of 132 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 159 telescope corrections were flagged in sub-array 2. ! A total of 56 telescope corrections were flagged in sub-array 3. ! A total of 62 telescope corrections were flagged in sub-array 5. ! A total of 16 telescope corrections were flagged in sub-array 7. ! A total of 21 telescope corrections were flagged in sub-array 8. ! A total of 2 telescope corrections were flagged in sub-array 9. ! A total of 132 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 159 telescope corrections were flagged in sub-array 2. ! A total of 56 telescope corrections were flagged in sub-array 3. ! A total of 62 telescope corrections were flagged in sub-array 5. ! A total of 16 telescope corrections were flagged in sub-array 7. ! A total of 21 telescope corrections were flagged in sub-array 8. ! A total of 2 telescope corrections were flagged in sub-array 9. ! A total of 132 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 159 telescope corrections were flagged in sub-array 2. ! A total of 56 telescope corrections were flagged in sub-array 3. ! A total of 62 telescope corrections were flagged in sub-array 5. ! A total of 16 telescope corrections were flagged in sub-array 7. ! A total of 21 telescope corrections were flagged in sub-array 8. ! A total of 2 telescope corrections were flagged in sub-array 9. ! A total of 132 telescope corrections were flagged in sub-array 10. ! ! Fit before self-cal, rms=1.078656Jy sigma=18.353291 ! Fit after self-cal, rms=0.665293Jy sigma=10.728439 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.974% of the data. ! The x-axis pixel size should ideally be below 0.1754 milli-arcsec ! Estimated beam: bmin=0.8127 mas, bmaj=1.048 mas, bpa=13.43 degrees ! Estimated noise=0.789329 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.262307 Jy ! Component: 100 - total flux cleaned = 0.36137 Jy ! Total flux subtracted in 100 components = 0.36137 Jy ! Clean residual min=-0.012831 max=0.047255 Jy/beam ! Clean residual mean=0.000087 rms=0.002714 Jy/beam ! Combined flux in latest and established models = 0.36137 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.36137 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122360Jy sigma=2.113406 ! Fit after self-cal, rms=0.121700Jy sigma=2.105372 ! Inverting map ! Your choice of large map pixels excluded 0.974% of the data. ! The x-axis pixel size should ideally be below 0.1754 milli-arcsec ! Added new window around map position (-0.8, 0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.052492 Jy ! Component: 100 - total flux cleaned = 0.0820699 Jy ! Total flux subtracted in 100 components = 0.0820699 Jy ! Clean residual min=-0.007608 max=0.022230 Jy/beam ! Clean residual mean=0.000057 rms=0.001760 Jy/beam ! Combined flux in latest and established models = 0.44344 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 14 components and 0.44344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088732Jy sigma=1.424808 ! Fit after self-cal, rms=0.087067Jy sigma=1.398965 ! Inverting map ! Your choice of large map pixels excluded 0.974% of the data. ! The x-axis pixel size should ideally be below 0.1754 milli-arcsec ! Added new window around map position (-1.6, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0237016 Jy ! Component: 100 - total flux cleaned = 0.038553 Jy ! Total flux subtracted in 100 components = 0.038553 Jy ! Clean residual min=-0.006615 max=0.015646 Jy/beam ! Clean residual mean=0.000044 rms=0.001398 Jy/beam ! Combined flux in latest and established models = 0.481993 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 25 components and 0.481993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077597Jy sigma=1.194403 ! Fit after self-cal, rms=0.076848Jy sigma=1.179886 ! Inverting map ! Your choice of large map pixels excluded 0.974% of the data. ! The x-axis pixel size should ideally be below 0.1754 milli-arcsec ! Added new window around map position (-2.8, 1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0163338 Jy ! Component: 100 - total flux cleaned = 0.0263032 Jy ! Total flux subtracted in 100 components = 0.0263032 Jy ! Clean residual min=-0.005874 max=0.009181 Jy/beam ! Clean residual mean=0.000034 rms=0.001189 Jy/beam ! Combined flux in latest and established models = 0.508297 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 31 components and 0.508297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072188Jy sigma=1.079950 ! Fit after self-cal, rms=0.071739Jy sigma=1.070912 ! Inverting map ! Your choice of large map pixels excluded 0.974% of the data. ! The x-axis pixel size should ideally be below 0.1754 milli-arcsec ! Added new window around map position (-6.2, 2.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101878 Jy ! Component: 100 - total flux cleaned = 0.0176304 Jy ! Total flux subtracted in 100 components = 0.0176304 Jy ! Clean residual min=-0.005234 max=0.007077 Jy/beam ! Clean residual mean=0.000028 rms=0.001085 Jy/beam ! Combined flux in latest and established models = 0.525927 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 39 components and 0.525927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069618Jy sigma=1.024546 ! Fit after self-cal, rms=0.069477Jy sigma=1.021460 ! Inverting map ! Your choice of large map pixels excluded 0.974% of the data. ! The x-axis pixel size should ideally be below 0.1754 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.974% of the data. ! The x-axis pixel size should ideally be below 0.1754 milli-arcsec ! Estimated beam: bmin=1.033 mas, bmaj=1.31 mas, bpa=28.25 degrees ! Estimated noise=0.554396 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0109986 Jy ! Component: 100 - total flux cleaned = 0.0190009 Jy ! Component: 150 - total flux cleaned = 0.0250625 Jy ! Component: 200 - total flux cleaned = 0.0297698 Jy ! Total flux subtracted in 200 components = 0.0297698 Jy ! Clean residual min=-0.003600 max=0.004766 Jy/beam ! Clean residual mean=0.000039 rms=0.000851 Jy/beam ! Combined flux in latest and established models = 0.555697 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 67 components and 0.555697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067290Jy sigma=0.972743 ! Fit after self-cal, rms=0.067127Jy sigma=0.969657 ! Inverting map ! Your choice of large map pixels excluded 0.974% of the data. ! The x-axis pixel size should ideally be below 0.1754 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.033 x 1.31 at 28.25 degrees (North through East) ! Clean map min=-0.0033701 max=0.33842 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 NL 0.98 ON 0.73 OV 1.03 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.01 HN 1.04 KK 1.01 ! KP 0.99 LA 1.00 NL 0.99 OV 1.02 ! PT 0.98 SC 0.99 ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HN 1.03 KK 1.30 ON 0.90 WZ 1.01 ! ! A total of 18 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* HN 0.00* ON 0.00* ! ! A total of 18 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.01 HN 1.06 KK 1.07 NY 1.00 ! OV 0.99 ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.01 KP 0.95 NY 1.13 PT 0.97 ! ! Telescope amplitude corrections in sub-array 7: ! SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.01 FD 0.99 HN 1.04 KP 1.00 ! LA 0.98 NL 1.03 OV 1.02 PT 1.00 ! WZ 1.05 ! ! A total of 6 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! HN 1.02 NL 0.98 NY 0.97 SC 1.05 ! ! A total of 30 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! NY 0.00* ON 0.00* WZ 0.00* ! ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 NL 0.97 ON 0.84 OV 1.02 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.00 HN 1.02 KK 1.02 ! KP 0.99 LA 0.99 NL 0.98 OV 1.02 ! PT 0.99 SC 1.00 ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HN 0.96 KK 1.34 ON 1.11 WZ 0.98 ! ! A total of 18 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* HN 0.00* ON 0.00* ! ! A total of 18 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.00 HN 1.09 KK 0.95 NY 0.98 ! OV 0.98 ! ! Telescope amplitude corrections in sub-array 6: ! FD 0.98 KP 0.96 NY 0.96 PT 0.98 ! ! Telescope amplitude corrections in sub-array 7: ! SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.02 FD 0.98 HN 1.05 KP 0.98 ! LA 0.98 NL 1.01 OV 1.05 PT 0.99 ! WZ 0.98 ! ! A total of 6 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! HN 0.98 NL 1.03 NY 1.02 SC 1.13 ! ! A total of 30 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! NY 0.00* ON 0.00* WZ 0.00* ! ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 NL 0.93 ON 0.88 OV 1.04 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.99 HN 1.01 KK 1.04 ! KP 0.98 LA 0.98 NL 0.97 OV 1.02 ! PT 0.97 SC 1.01 ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HN 1.07 KK 1.57 ON 0.91 WZ 1.01 ! ! A total of 18 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* HN 0.00* ON 0.00* ! ! A total of 18 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.05 HN 1.00 KK 1.06 NY 0.97 ! OV 0.98 ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.03 KP 1.00 NY 0.85 PT 0.94 ! ! Telescope amplitude corrections in sub-array 7: ! SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.01 FD 0.99 HN 1.00 KP 0.97 ! LA 0.97 NL 1.04 OV 1.04 PT 0.99 ! WZ 0.96 ! ! A total of 6 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! HN 0.95 NL 0.97 NY 0.97 SC 1.11 ! ! A total of 30 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! NY 0.00* ON 0.00* WZ 0.00* ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 NL 0.95 ON 0.83 OV 0.98 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.01 HN 1.00 KK 1.04 ! KP 0.98 LA 0.97 NL 0.96 OV 1.02 ! PT 0.97 SC 0.99 ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HN 0.98 KK 1.35 ON 1.13 WZ 0.90 ! ! A total of 18 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* HN 0.00* ON 0.00* ! ! A total of 18 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.00 HN 0.95 KK 0.92 NY 1.00 ! OV 1.07 ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.05 KP 0.95 NY 0.76 PT 1.00 ! ! Telescope amplitude corrections in sub-array 7: ! SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.02 FD 1.00 HN 1.01 KP 0.98 ! LA 1.00 NL 0.98 OV 1.02 PT 0.97 ! WZ 0.98 ! ! A total of 6 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! HN 0.90 NL 0.96 NY 1.04 SC 1.07 ! ! A total of 30 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! NY 0.00* ON 0.00* WZ 0.00* ! ! ! Fit before self-cal, rms=0.067127Jy sigma=0.969657 ! Fit after self-cal, rms=0.066047Jy sigma=0.953354 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.625% of the data. ! The x-axis pixel size should ideally be below 0.1756 milli-arcsec ! Estimated beam: bmin=1.04 mas, bmaj=1.379 mas, bpa=26.01 degrees ! Estimated noise=0.560053 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.8, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00491286 Jy ! Component: 100 - total flux cleaned = 0.00816266 Jy ! Component: 150 - total flux cleaned = 0.010613 Jy ! Component: 200 - total flux cleaned = 0.0121526 Jy ! Total flux subtracted in 200 components = 0.0121526 Jy ! Clean residual min=-0.002908 max=0.002844 Jy/beam ! Clean residual mean=0.000013 rms=0.000633 Jy/beam ! Combined flux in latest and established models = 0.56785 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 95 components and 0.56785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065623Jy sigma=0.943544 ! Fit after self-cal, rms=0.065616Jy sigma=0.942522 ! Inverting map ! Your choice of large map pixels excluded 0.625% of the data. ! The x-axis pixel size should ideally be below 0.1756 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065616Jy sigma=0.942522 ! Fit after self-cal, rms=0.063855Jy sigma=0.896976 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.625% of the data. ! The x-axis pixel size should ideally be below 0.1756 milli-arcsec ! Estimated beam: bmin=1.038 mas, bmaj=1.377 mas, bpa=26.24 degrees ! Estimated noise=0.561118 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00236487 Jy ! Component: 100 - total flux cleaned = 0.0039488 Jy ! Component: 150 - total flux cleaned = 0.00464254 Jy ! Component: 200 - total flux cleaned = 0.004892 Jy ! Total flux subtracted in 200 components = 0.004892 Jy ! Clean residual min=-0.002341 max=0.002229 Jy/beam ! Clean residual mean=0.000006 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.572742 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 110 components and 0.572742 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063746Jy sigma=0.894519 ! Fit after self-cal, rms=0.063738Jy sigma=0.894255 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.625% of the data. ! The x-axis pixel size should ideally be below 0.1756 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, 2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00222043 Jy ! Component: 100 - total flux cleaned = 0.00265263 Jy ! Component: 150 - total flux cleaned = 0.00273771 Jy ! Component: 200 - total flux cleaned = 0.00277437 Jy ! Total flux subtracted in 200 components = 0.00277437 Jy ! Clean residual min=-0.002411 max=0.002102 Jy/beam ! Clean residual mean=0.000003 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 0.575516 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 128 components and 0.575516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063639Jy sigma=0.892447 ! Fit after self-cal, rms=0.063626Jy sigma=0.892298 ! Inverting map ! Your choice of large map pixels excluded 0.625% of the data. ! The x-axis pixel size should ideally be below 0.1756 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063626Jy sigma=0.892298 ! Fit after self-cal, rms=0.063422Jy sigma=0.885845 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.625% of the data. ! The x-axis pixel size should ideally be below 0.1756 milli-arcsec ! Estimated beam: bmin=1.038 mas, bmaj=1.377 mas, bpa=26.25 degrees ! Estimated noise=0.56095 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000741278 Jy ! Component: 100 - total flux cleaned = 0.00103047 Jy ! Component: 150 - total flux cleaned = 0.00109444 Jy ! Component: 200 - total flux cleaned = 0.00115553 Jy ! Total flux subtracted in 200 components = 0.00115553 Jy ! Clean residual min=-0.002221 max=0.001964 Jy/beam ! Clean residual mean=0.000003 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.576672 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 135 components and 0.576672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063374Jy sigma=0.885173 ! Fit after self-cal, rms=0.063371Jy sigma=0.885111 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.625% of the data. ! The x-axis pixel size should ideally be below 0.1756 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000286259 Jy ! Component: 100 - total flux cleaned = 0.000375547 Jy ! Component: 150 - total flux cleaned = 0.000430959 Jy ! Component: 200 - total flux cleaned = 0.000456541 Jy ! Total flux subtracted in 200 components = 0.000456541 Jy ! Clean residual min=-0.002234 max=0.001944 Jy/beam ! Clean residual mean=0.000003 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.577128 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 139 components and 0.577128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063340Jy sigma=0.884732 ! Fit after self-cal, rms=0.063333Jy sigma=0.884696 ! Inverting map ! Your choice of large map pixels excluded 0.625% of the data. ! The x-axis pixel size should ideally be below 0.1756 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063333Jy sigma=0.884696 ! Fit after self-cal, rms=0.063373Jy sigma=0.884631 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.625% of the data. ! The x-axis pixel size should ideally be below 0.1756 milli-arcsec ! Estimated beam: bmin=2.563 mas, bmaj=2.975 mas, bpa=38.34 degrees ! Estimated noise=0.647462 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000680169 Jy ! Component: 100 - total flux cleaned = 0.000984679 Jy ! Component: 150 - total flux cleaned = 0.00108708 Jy ! Component: 200 - total flux cleaned = 0.00113101 Jy ! Total flux subtracted in 200 components = 0.00113101 Jy ! Clean residual min=-0.001952 max=0.001979 Jy/beam ! Clean residual mean=0.000005 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.578259 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 148 components and 0.578259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063367Jy sigma=0.884457 ! Fit after self-cal, rms=0.063368Jy sigma=0.884429 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.625% of the data. ! The x-axis pixel size should ideally be below 0.1756 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.63108e-05 Jy ! Component: 100 - total flux cleaned = 0.000239411 Jy ! Component: 150 - total flux cleaned = 0.000287856 Jy ! Component: 200 - total flux cleaned = 0.000331021 Jy ! Total flux subtracted in 200 components = 0.000331021 Jy ! Clean residual min=-0.001920 max=0.001957 Jy/beam ! Clean residual mean=0.000005 rms=0.000520 Jy/beam ! Combined flux in latest and established models = 0.57859 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 157 components and 0.57859 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063366Jy sigma=0.884378 ! Fit after self-cal, rms=0.063364Jy sigma=0.884355 ! Inverting map ! Your choice of large map pixels excluded 0.625% of the data. ! The x-axis pixel size should ideally be below 0.1756 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.625% of the data. ! The x-axis pixel size should ideally be below 0.1756 milli-arcsec ! Estimated beam: bmin=1.038 mas, bmaj=1.377 mas, bpa=26.19 degrees ! Estimated noise=0.561092 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.038 x 1.377 at 26.19 degrees (North through East) ! Clean map min=-0.0020012 max=0.33646 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.625% of the data. ! The x-axis pixel size should ideally be below 0.1756 milli-arcsec ! Estimated beam: bmin=0.804 mas, bmaj=1.1 mas, bpa=12.03 degrees ! Estimated noise=0.806458 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.265495 Jy ! Component: 100 - total flux cleaned = 0.369346 Jy ! Component: 150 - total flux cleaned = 0.424245 Jy ! Component: 200 - total flux cleaned = 0.457168 Jy ! Total flux subtracted in 200 components = 0.457168 Jy ! Clean residual min=-0.007091 max=0.018040 Jy/beam ! Clean residual mean=0.000046 rms=0.001410 Jy/beam ! Combined flux in latest and established models = 0.457168 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.457168 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.625% of the data. ! The x-axis pixel size should ideally be below 0.1756 milli-arcsec ! Estimated beam: bmin=1.038 mas, bmaj=1.377 mas, bpa=26.19 degrees ! Estimated noise=0.561092 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0323438 Jy ! Component: 100 - total flux cleaned = 0.0525775 Jy ! Component: 150 - total flux cleaned = 0.0671674 Jy ! Component: 200 - total flux cleaned = 0.0780455 Jy ! Total flux subtracted in 200 components = 0.0780455 Jy ! Clean residual min=-0.003074 max=0.006289 Jy/beam ! Clean residual mean=0.000041 rms=0.000887 Jy/beam ! Combined flux in latest and established models = 0.535213 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 49 components and 0.535213 Jy ! Inverting map ! Your choice of large map pixels excluded 0.625% of the data. ! The x-axis pixel size should ideally be below 0.1756 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00827632 Jy ! Component: 100 - total flux cleaned = 0.0147187 Jy ! Component: 150 - total flux cleaned = 0.0198936 Jy ! Component: 200 - total flux cleaned = 0.0241144 Jy ! Total flux subtracted in 200 components = 0.0241144 Jy ! Clean residual min=-0.002397 max=0.002899 Jy/beam ! Clean residual mean=0.000019 rms=0.000571 Jy/beam ! Combined flux in latest and established models = 0.559328 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 77 components and 0.559328 Jy ! Inverting map ! Your choice of large map pixels excluded 0.625% of the data. ! The x-axis pixel size should ideally be below 0.1756 milli-arcsec ! Added new window around map position (0.8, -0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0035468 Jy ! Component: 100 - total flux cleaned = 0.00643728 Jy ! Component: 150 - total flux cleaned = 0.008839 Jy ! Component: 200 - total flux cleaned = 0.0108493 Jy ! Total flux subtracted in 200 components = 0.0108493 Jy ! Clean residual min=-0.002332 max=0.001920 Jy/beam ! Clean residual mean=0.000009 rms=0.000487 Jy/beam ! Combined flux in latest and established models = 0.570177 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 105 components and 0.570178 Jy ! Inverting map ! Your choice of large map pixels excluded 0.625% of the data. ! The x-axis pixel size should ideally be below 0.1756 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.625% of the data. ! The x-axis pixel size should ideally be below 0.1756 milli-arcsec ! Estimated beam: bmin=2.563 mas, bmaj=2.975 mas, bpa=38.34 degrees ! Estimated noise=0.647462 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00250392 Jy ! Component: 100 - total flux cleaned = 0.00423776 Jy ! Component: 150 - total flux cleaned = 0.00548686 Jy ! Component: 200 - total flux cleaned = 0.00641151 Jy ! Total flux subtracted in 200 components = 0.00641151 Jy ! Clean residual min=-0.001903 max=0.001858 Jy/beam ! Clean residual mean=0.000008 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.576589 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000624375 Jy ! Component: 100 - total flux cleaned = 0.000901724 Jy ! Component: 150 - total flux cleaned = 0.00109873 Jy ! Component: 200 - total flux cleaned = 0.00125397 Jy ! Total flux subtracted in 200 components = 0.00125397 Jy ! Clean residual min=-0.001915 max=0.001904 Jy/beam ! Clean residual mean=0.000006 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.577843 Jy ! Adding 88 model components to the UV plane model. ! The established model now contains 176 components and 0.577843 Jy ! Inverting map ! Your choice of large map pixels excluded 0.625% of the data. ! The x-axis pixel size should ideally be below 0.1756 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.625% of the data. ! The x-axis pixel size should ideally be below 0.1756 milli-arcsec ! Estimated beam: bmin=1.038 mas, bmaj=1.377 mas, bpa=26.19 degrees ! Estimated noise=0.561092 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00012724 Jy ! Component: 100 - total flux cleaned = -0.000128061 Jy ! Component: 150 - total flux cleaned = -6.80563e-05 Jy ! Component: 200 - total flux cleaned = -3.95516e-05 Jy ! Total flux subtracted in 200 components = -3.95516e-05 Jy ! Clean residual min=-0.002296 max=0.001976 Jy/beam ! Clean residual mean=0.000003 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.577804 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 188 components and 0.577804 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063462Jy sigma=0.884707 ! Fit after self-cal, rms=0.062937Jy sigma=0.881786 wmodel J1632+8232_X_map.mod ! Writing 188 model components to file: J1632+8232_X_map.mod wobs J1632+8232_X_uvs.fits ! Writing UV FITS file: J1632+8232_X_uvs.fits wwins J1632+8232_X_map.win ! wwins: Wrote 8 windows to J1632+8232_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.625% of the data. ! The x-axis pixel size should ideally be below 0.1756 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000831631 Jy ! Component: 100 - total flux cleaned = -0.00097242 Jy ! Component: 150 - total flux cleaned = -0.0011737 Jy ! Component: 200 - total flux cleaned = -0.00133637 Jy ! Component: 250 - total flux cleaned = -0.00143128 Jy ! Component: 300 - total flux cleaned = -0.00146252 Jy ! Component: 350 - total flux cleaned = -0.00146237 Jy ! Component: 400 - total flux cleaned = -0.001432 Jy ! Component: 450 - total flux cleaned = -0.00146185 Jy ! Component: 500 - total flux cleaned = -0.00143224 Jy ! Component: 550 - total flux cleaned = -0.0014612 Jy ! Component: 600 - total flux cleaned = -0.00148985 Jy ! Component: 650 - total flux cleaned = -0.00146115 Jy ! Component: 700 - total flux cleaned = -0.00148932 Jy ! Component: 750 - total flux cleaned = -0.00137793 Jy ! Component: 800 - total flux cleaned = -0.00148884 Jy ! Component: 850 - total flux cleaned = -0.00146144 Jy ! Component: 900 - total flux cleaned = -0.00143471 Jy ! Component: 950 - total flux cleaned = -0.00151565 Jy ! Component: 1000 - total flux cleaned = -0.00156906 Jy ! Component: 1050 - total flux cleaned = -0.00164816 Jy ! Component: 1100 - total flux cleaned = -0.00164788 Jy ! Component: 1150 - total flux cleaned = -0.00167392 Jy ! Component: 1200 - total flux cleaned = -0.00167385 Jy ! Component: 1250 - total flux cleaned = -0.00180267 Jy ! Component: 1300 - total flux cleaned = -0.00177706 Jy ! Component: 1350 - total flux cleaned = -0.0018281 Jy ! Component: 1400 - total flux cleaned = -0.0018783 Jy ! Component: 1450 - total flux cleaned = -0.00185337 Jy ! Component: 1500 - total flux cleaned = -0.00200289 Jy ! Component: 1550 - total flux cleaned = -0.00190377 Jy ! Component: 1600 - total flux cleaned = -0.00195315 Jy ! Component: 1650 - total flux cleaned = -0.00202691 Jy ! Component: 1700 - total flux cleaned = -0.00202694 Jy ! Component: 1750 - total flux cleaned = -0.00214847 Jy ! Component: 1800 - total flux cleaned = -0.0021485 Jy ! Component: 1850 - total flux cleaned = -0.00222079 Jy ! Component: 1900 - total flux cleaned = -0.00222065 Jy ! Component: 1950 - total flux cleaned = -0.00219704 Jy ! Component: 2000 - total flux cleaned = -0.00236334 Jy ! Component: 2050 - total flux cleaned = -0.00238676 Jy ! Component: 2100 - total flux cleaned = -0.00248089 Jy ! Component: 2150 - total flux cleaned = -0.00243396 Jy ! Component: 2200 - total flux cleaned = -0.00252735 Jy ! Component: 2250 - total flux cleaned = -0.00259706 Jy ! Component: 2300 - total flux cleaned = -0.00257371 Jy ! Component: 2350 - total flux cleaned = -0.00257375 Jy ! Component: 2400 - total flux cleaned = -0.00257396 Jy ! Component: 2450 - total flux cleaned = -0.00266535 Jy ! Component: 2500 - total flux cleaned = -0.00284764 Jy ! Component: 2550 - total flux cleaned = -0.0027114 Jy ! Component: 2600 - total flux cleaned = -0.00284697 Jy ! Component: 2650 - total flux cleaned = -0.00286961 Jy ! Component: 2700 - total flux cleaned = -0.00284739 Jy ! Component: 2750 - total flux cleaned = -0.0029366 Jy ! Component: 2800 - total flux cleaned = -0.00309232 Jy ! Component: 2850 - total flux cleaned = -0.00315889 Jy ! Component: 2900 - total flux cleaned = -0.00322526 Jy ! Component: 2950 - total flux cleaned = -0.00315919 Jy ! Component: 3000 - total flux cleaned = -0.00322509 Jy ! Component: 3050 - total flux cleaned = -0.00335646 Jy ! Component: 3100 - total flux cleaned = -0.00340013 Jy ! Component: 3150 - total flux cleaned = -0.00350875 Jy ! Component: 3200 - total flux cleaned = -0.00346538 Jy ! Component: 3250 - total flux cleaned = -0.00363808 Jy ! Component: 3300 - total flux cleaned = -0.00359489 Jy ! Component: 3350 - total flux cleaned = -0.00368075 Jy ! Component: 3400 - total flux cleaned = -0.00374503 Jy ! Component: 3450 - total flux cleaned = -0.00385163 Jy ! Component: 3500 - total flux cleaned = -0.00387282 Jy ! Component: 3550 - total flux cleaned = -0.00378814 Jy ! Component: 3600 - total flux cleaned = -0.00393591 Jy ! Component: 3650 - total flux cleaned = -0.00412539 Jy ! Component: 3700 - total flux cleaned = -0.00414621 Jy ! Component: 3750 - total flux cleaned = -0.00414616 Jy ! Component: 3800 - total flux cleaned = -0.00418792 Jy ! Component: 3850 - total flux cleaned = -0.00420874 Jy ! Component: 3900 - total flux cleaned = -0.00433313 Jy ! Component: 3950 - total flux cleaned = -0.00441583 Jy ! Component: 4000 - total flux cleaned = -0.0042921 Jy ! Component: 4050 - total flux cleaned = -0.00431265 Jy ! Total flux subtracted in 4096 components = -0.00441515 Jy ! Clean residual min=-0.001237 max=0.001180 Jy/beam ! Clean residual mean=0.000001 rms=0.000353 Jy/beam ! Combined flux in latest and established models = 0.573389 Jy keep ! Adding 331 model components to the UV plane model. ! The established model now contains 519 components and 0.573389 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv118_uvs/J1632+8232_X_map.fits ! Inverting map ! Your choice of large map pixels excluded 0.625% of the data. ! The x-axis pixel size should ideally be below 0.1756 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.038 x 1.377 at 26.19 degrees (North through East) ! Clean map min=-0.0018245 max=0.33661 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv118_uvs/J1632+8232_X_map.fits wmodel /scr/pima/rv118_uvs/J1632+8232_X_map.mod ! Writing 519 model components to file: /scr/pima/rv118_uvs/J1632+8232_X_map.mod wobs /scr/pima/rv118_uvs/J1632+8232_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv118_uvs/J1632+8232_X_uvs.fits wwins /scr/pima/rv118_uvs/J1632+8232_X_map.win ! wwins: Wrote 9 windows to /scr/pima/rv118_uvs/J1632+8232_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.33661 invert ! Inverting map ! Your choice of large map pixels excluded 0.625% of the data. ! The x-axis pixel size should ideally be below 0.1756 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00035193 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.313654 0.313654 0.627308 1.25462 2.50923 5.01847 10.0369 20.0739 40.1477 80.2955 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.336 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 956.467 quit ! Quitting program ! Log file /scr/pima/rv118_uvs/J1632+8232_X_dfm.log closed on Sun Dec 10 00:10:27 2017