! Started logfile: /scr/pima/rv118_uvs/J1516+1932_S_dfm.log on Sun Dec 10 00:10:28 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.23275
obs     /scr/pima/rv118_uvs/J1516+1932_S_uva.fits
! Reading UV FITS file: /scr/pima/rv118_uvs/J1516+1932_S_uva.fits
! AN table 1: 95 integrations on 55 of 55 possible baselines.
! AN table 2: 13 integrations on 45 of 45 possible baselines.
! AN table 3: 19 integrations on 6 of 6 possible baselines.
! Apparent sampling: 0.19632 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1516+1932
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23275e+09        8e+06          1        8e+06
!  02        2  2.26275e+09        8e+06          1        8e+06
!  03        3  2.35275e+09        8e+06          1        8e+06
!  04        4  2.37275e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 4652 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1516+1932_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 735 telescope corrections were flagged in sub-array 1.
!  A total of 48 telescope corrections were flagged in sub-array 2.
!  A total of 28 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 2.
!  A total of 735 telescope corrections were flagged in sub-array 1.
!  A total of 48 telescope corrections were flagged in sub-array 2.
!  A total of 28 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 3.
!  A total of 735 telescope corrections were flagged in sub-array 1.
!  A total of 48 telescope corrections were flagged in sub-array 2.
!  A total of 28 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 4.
!  A total of 735 telescope corrections were flagged in sub-array 1.
!  A total of 48 telescope corrections were flagged in sub-array 2.
!  A total of 28 telescope corrections were flagged in sub-array 3.
! 
! Fit before self-cal, rms=1.103679Jy  sigma=13.688189
! Fit after  self-cal, rms=0.622770Jy  sigma=7.417864
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.309 mas, bmaj=2.961 mas, bpa=25.28 degrees
! Estimated noise=1.13351 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.329557 Jy
! Component: 100  -  total flux cleaned = 0.415955 Jy
! Total flux subtracted in 100 components = 0.415955 Jy
! Clean residual min=-0.014487 max=0.031002 Jy/beam
! Clean residual mean=-0.000054 rms=0.003129 Jy/beam
! Combined flux in latest and established models = 0.415955 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.415955 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.218028Jy  sigma=1.680299
! Fit after  self-cal, rms=0.217776Jy  sigma=1.679817
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0286223 Jy
! Component: 100  -  total flux cleaned = 0.0407497 Jy
! Total flux subtracted in 100 components = 0.0407497 Jy
! Clean residual min=-0.013993 max=0.018024 Jy/beam
! Clean residual mean=-0.000030 rms=0.002911 Jy/beam
! Combined flux in latest and established models = 0.456705 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 17 components and 0.456705 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.213144Jy  sigma=1.609635
! Fit after  self-cal, rms=0.213080Jy  sigma=1.609433
! Inverting map 
! Added new window around map position (-2, 7).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0158677 Jy
! Component: 100  -  total flux cleaned = 0.0241327 Jy
! Total flux subtracted in 100 components = 0.0241327 Jy
! Clean residual min=-0.013043 max=0.014092 Jy/beam
! Clean residual mean=-0.000018 rms=0.002817 Jy/beam
! Combined flux in latest and established models = 0.480837 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 28 components and 0.480837 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.211495Jy  sigma=1.584135
! Fit after  self-cal, rms=0.211320Jy  sigma=1.580506
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.456 mas, bmaj=2.827 mas, bpa=39.49 degrees
! Estimated noise=1.00128 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0109027 Jy
! Component: 100  -  total flux cleaned = 0.0171729 Jy
! Component: 150  -  total flux cleaned = 0.019274 Jy
! Component: 200  -  total flux cleaned = 0.0205201 Jy
! Total flux subtracted in 200 components = 0.0205201 Jy
! Clean residual min=-0.010424 max=0.009439 Jy/beam
! Clean residual mean=0.000004 rms=0.002320 Jy/beam
! Combined flux in latest and established models = 0.501357 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 46 components and 0.501357 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.210497Jy  sigma=1.573980
! Fit after  self-cal, rms=0.210353Jy  sigma=1.572392
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.456 x 2.827 at 39.49 degrees (North through East)
! Clean map  min=-0.0096071  max=0.40741 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 90 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.05     HH        0.97     HN        1.05     
!   LA        1.01     NL        1.01     NY        0.98     ON        0.96     
!   PT        1.02     SC        1.10     WZ        1.06     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.05     FD        1.08     HN        1.03     KK        0.98     
!   KP        1.02     LA        1.01     NL        1.02     OV        1.00     
!   PT        0.98     SC        1.10     
! 
!  A total of 24 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   KK        1.12     NY        0.93     ON        0.99     WZ        0.88     
! 
! 
! Correcting IF 2.
!  A total of 90 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.08     HH        1.04     HN        1.05     
!   LA        0.98     NL        0.99     NY        1.03     ON        0.96     
!   PT        1.00     SC        1.11     WZ        1.02     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.05     FD        1.08     HN        1.05     KK        0.99     
!   KP        1.01     LA        1.00     NL        0.99     OV        1.02     
!   PT        0.98     SC        1.12     
! 
!  A total of 24 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   KK        1.11     NY        0.94     ON        0.88     WZ        1.00     
! 
! 
! Correcting IF 3.
!  A total of 90 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.18     HH        1.09     HN        1.06     
!   LA        0.99     NL        0.53     NY        1.04     ON        1.06     
!   PT        1.07     SC        0.58     WZ        1.14     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.08     FD        1.15     HN        1.06     KK        1.00     
!   KP        0.52     LA        1.02     NL        0.70     OV        1.01     
!   PT        1.01     SC        0.63     
! 
!  A total of 24 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   KK        0.94     NY        1.09     ON        1.09     WZ        1.10     
! 
! 
! Correcting IF 4.
!  A total of 90 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.10     HH        0.97     HN        1.09     
!   LA        0.99     NL        1.02     NY        1.09     ON        1.03     
!   PT        1.03     SC        1.14     WZ        1.08     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.06     FD        1.04     HN        1.06     KK        1.04     
!   KP        1.04     LA        1.03     NL        1.01     OV        1.03     
!   PT        1.00     SC        1.13     
! 
!  A total of 24 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   KK        1.23     NY        1.05     ON        0.89     WZ        1.10     
! 
! 
! Fit before self-cal, rms=0.210353Jy  sigma=1.572392
! Fit after  self-cal, rms=0.163903Jy  sigma=1.017935
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.494 mas, bmaj=3.052 mas, bpa=25.14 degrees
! Estimated noise=1.01339 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00171214 Jy
! Component: 100  -  total flux cleaned = 0.00130123 Jy
! Component: 150  -  total flux cleaned = 0.000968806 Jy
! Component: 200  -  total flux cleaned = 0.000881654 Jy
! Total flux subtracted in 200 components = 0.000881654 Jy
! Clean residual min=-0.005063 max=0.005285 Jy/beam
! Clean residual mean=0.000012 rms=0.001159 Jy/beam
! Combined flux in latest and established models = 0.502239 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 55 components and 0.502239 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.163820Jy  sigma=1.011742
! Fit after  self-cal, rms=0.163967Jy  sigma=1.009396
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.163967Jy  sigma=1.009396
! Fit after  self-cal, rms=0.163697Jy  sigma=0.928195
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.493 mas, bmaj=3.053 mas, bpa=25.21 degrees
! Estimated noise=1.01327 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00151122 Jy
! Component: 100  -  total flux cleaned = 0.0013218 Jy
! Component: 150  -  total flux cleaned = 0.00124166 Jy
! Component: 200  -  total flux cleaned = 0.00103482 Jy
! Total flux subtracted in 200 components = 0.00103482 Jy
! Clean residual min=-0.004379 max=0.004239 Jy/beam
! Clean residual mean=0.000003 rms=0.000957 Jy/beam
! Combined flux in latest and established models = 0.503274 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 58 components and 0.503274 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.163679Jy  sigma=0.925130
! Fit after  self-cal, rms=0.163743Jy  sigma=0.924667
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000383993 Jy
! Component: 100  -  total flux cleaned = 0.000263946 Jy
! Component: 150  -  total flux cleaned = 0.000103553 Jy
! Component: 200  -  total flux cleaned = 8.00996e-06 Jy
! Total flux subtracted in 200 components = 8.00996e-06 Jy
! Clean residual min=-0.004389 max=0.004018 Jy/beam
! Clean residual mean=0.000003 rms=0.000949 Jy/beam
! Combined flux in latest and established models = 0.503282 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 61 components and 0.503282 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.163755Jy  sigma=0.923587
! Fit after  self-cal, rms=0.163761Jy  sigma=0.923473
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.163761Jy  sigma=0.923473
! Fit after  self-cal, rms=0.169284Jy  sigma=0.904954
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.496 mas, bmaj=3.045 mas, bpa=25.53 degrees
! Estimated noise=1.01141 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000410607 Jy
! Component: 100  -  total flux cleaned = 0.000128372 Jy
! Component: 150  -  total flux cleaned = -4.95795e-05 Jy
! Component: 200  -  total flux cleaned = -0.000246737 Jy
! Total flux subtracted in 200 components = -0.000246737 Jy
! Clean residual min=-0.003626 max=0.003975 Jy/beam
! Clean residual mean=0.000008 rms=0.000855 Jy/beam
! Combined flux in latest and established models = 0.503035 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 63 components and 0.503035 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.169291Jy  sigma=0.903425
! Fit after  self-cal, rms=0.169336Jy  sigma=0.903141
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6.5, 4.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00342335 Jy
! Component: 100  -  total flux cleaned = 0.00337046 Jy
! Component: 150  -  total flux cleaned = 0.00336948 Jy
! Component: 200  -  total flux cleaned = 0.00341596 Jy
! Total flux subtracted in 200 components = 0.00341596 Jy
! Clean residual min=-0.003559 max=0.004193 Jy/beam
! Clean residual mean=0.000010 rms=0.000834 Jy/beam
! Combined flux in latest and established models = 0.506451 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 76 components and 0.506451 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.169335Jy  sigma=0.900768
! Fit after  self-cal, rms=0.169254Jy  sigma=0.900506
! Inverting map 
! Added new window around map position (22.5, 8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00282776 Jy
! Component: 100  -  total flux cleaned = 0.00308186 Jy
! Component: 150  -  total flux cleaned = 0.00335989 Jy
! Component: 200  -  total flux cleaned = 0.00353465 Jy
! Total flux subtracted in 200 components = 0.00353465 Jy
! Clean residual min=-0.003497 max=0.003360 Jy/beam
! Clean residual mean=0.000011 rms=0.000811 Jy/beam
! Combined flux in latest and established models = 0.509986 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 90 components and 0.509986 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.169147Jy  sigma=0.898127
! Fit after  self-cal, rms=0.168995Jy  sigma=0.897973
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.168995Jy  sigma=0.897973
! Fit after  self-cal, rms=0.169890Jy  sigma=0.896722
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.283 mas, bmaj=9.273 mas, bpa=-7.014 degrees
! Estimated noise=1.30341 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00260838 Jy
! Component: 100  -  total flux cleaned = 0.00288922 Jy
! Component: 150  -  total flux cleaned = 0.00298841 Jy
! Component: 200  -  total flux cleaned = 0.00311204 Jy
! Total flux subtracted in 200 components = 0.00311204 Jy
! Clean residual min=-0.003463 max=0.003339 Jy/beam
! Clean residual mean=0.000019 rms=0.001026 Jy/beam
! Combined flux in latest and established models = 0.513098 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 109 components and 0.513098 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.169881Jy  sigma=0.896074
! Fit after  self-cal, rms=0.169871Jy  sigma=0.895886
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000455781 Jy
! Component: 100  -  total flux cleaned = 0.000530579 Jy
! Component: 150  -  total flux cleaned = 0.000531855 Jy
! Component: 200  -  total flux cleaned = 0.000563156 Jy
! Total flux subtracted in 200 components = 0.000563156 Jy
! Clean residual min=-0.003508 max=0.003312 Jy/beam
! Clean residual mean=0.000019 rms=0.001016 Jy/beam
! Combined flux in latest and established models = 0.513661 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 115 components and 0.513661 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.169889Jy  sigma=0.895978
! Fit after  self-cal, rms=0.169904Jy  sigma=0.895942
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.497 mas, bmaj=3.043 mas, bpa=25.74 degrees
! Estimated noise=1.01018 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.497 x 3.043 at 25.74 degrees (North through East)
! Clean map  min=-0.0030873  max=0.41053 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.323 mas, bmaj=3.118 mas, bpa=22.1 degrees
! Estimated noise=1.13482 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.328365 Jy
! Component: 100  -  total flux cleaned = 0.414383 Jy
! Component: 150  -  total flux cleaned = 0.44715 Jy
! Component: 200  -  total flux cleaned = 0.464175 Jy
! Total flux subtracted in 200 components = 0.464175 Jy
! Clean residual min=-0.004693 max=0.008860 Jy/beam
! Clean residual mean=-0.000023 rms=0.001196 Jy/beam
! Combined flux in latest and established models = 0.464175 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 0.464175 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.497 mas, bmaj=3.043 mas, bpa=25.74 degrees
! Estimated noise=1.01018 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.015599 Jy
! Component: 100  -  total flux cleaned = 0.0254319 Jy
! Component: 150  -  total flux cleaned = 0.0320478 Jy
! Component: 200  -  total flux cleaned = 0.0369675 Jy
! Total flux subtracted in 200 components = 0.0369675 Jy
! Clean residual min=-0.003992 max=0.004016 Jy/beam
! Clean residual mean=0.000003 rms=0.000872 Jy/beam
! Combined flux in latest and established models = 0.501142 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 66 components and 0.501142 Jy
! Inverting map 
! Added new window around map position (21.5, -12).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00420753 Jy
! Component: 100  -  total flux cleaned = 0.00744369 Jy
! Component: 150  -  total flux cleaned = 0.00937098 Jy
! Component: 200  -  total flux cleaned = 0.0101137 Jy
! Total flux subtracted in 200 components = 0.0101137 Jy
! Clean residual min=-0.003661 max=0.003620 Jy/beam
! Clean residual mean=0.000006 rms=0.000813 Jy/beam
! Combined flux in latest and established models = 0.511256 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 83 components and 0.511256 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.283 mas, bmaj=9.273 mas, bpa=-7.014 degrees
! Estimated noise=1.30341 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00264206 Jy
! Component: 100  -  total flux cleaned = 0.00346524 Jy
! Component: 150  -  total flux cleaned = 0.00415263 Jy
! Component: 200  -  total flux cleaned = 0.00443348 Jy
! Total flux subtracted in 200 components = 0.00443348 Jy
! Clean residual min=-0.003727 max=0.003359 Jy/beam
! Clean residual mean=0.000018 rms=0.001000 Jy/beam
! Combined flux in latest and established models = 0.51569 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000164835 Jy
! Component: 100  -  total flux cleaned = 0.000275461 Jy
! Component: 150  -  total flux cleaned = 0.0003092 Jy
! Component: 200  -  total flux cleaned = 0.00034049 Jy
! Total flux subtracted in 200 components = 0.00034049 Jy
! Clean residual min=-0.003646 max=0.003215 Jy/beam
! Clean residual mean=0.000019 rms=0.000992 Jy/beam
! Combined flux in latest and established models = 0.51603 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 109 components and 0.51603 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.497 mas, bmaj=3.043 mas, bpa=25.74 degrees
! Estimated noise=1.01018 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.01397e-05 Jy
! Component: 100  -  total flux cleaned = -0.000364839 Jy
! Component: 150  -  total flux cleaned = -0.000566428 Jy
! Component: 200  -  total flux cleaned = -0.000751734 Jy
! Total flux subtracted in 200 components = -0.000751734 Jy
! Clean residual min=-0.003404 max=0.003429 Jy/beam
! Clean residual mean=0.000008 rms=0.000790 Jy/beam
! Combined flux in latest and established models = 0.515278 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 122 components and 0.515278 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.169864Jy  sigma=0.895376
! Fit after  self-cal, rms=0.169675Jy  sigma=0.894400
wmodel J1516+1932_S_map.mod
! Writing 122 model components to file: J1516+1932_S_map.mod
wobs   J1516+1932_S_uvs.fits
! Writing UV FITS file: J1516+1932_S_uvs.fits
wwins  J1516+1932_S_map.win
! wwins: Wrote 5 windows to J1516+1932_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00103608 Jy
! Component: 100  -  total flux cleaned = -0.00109504 Jy
! Component: 150  -  total flux cleaned = -0.00132003 Jy
! Component: 200  -  total flux cleaned = -0.0015917 Jy
! Component: 250  -  total flux cleaned = -0.00174927 Jy
! Component: 300  -  total flux cleaned = -0.00180063 Jy
! Component: 350  -  total flux cleaned = -0.00174961 Jy
! Component: 400  -  total flux cleaned = -0.00195122 Jy
! Component: 450  -  total flux cleaned = -0.00209992 Jy
! Component: 500  -  total flux cleaned = -0.00219772 Jy
! Component: 550  -  total flux cleaned = -0.00239108 Jy
! Component: 600  -  total flux cleaned = -0.00234401 Jy
! Component: 650  -  total flux cleaned = -0.00262785 Jy
! Component: 700  -  total flux cleaned = -0.00239426 Jy
! Component: 750  -  total flux cleaned = -0.00258095 Jy
! Component: 800  -  total flux cleaned = -0.00285682 Jy
! Component: 850  -  total flux cleaned = -0.00294786 Jy
! Component: 900  -  total flux cleaned = -0.00312774 Jy
! Component: 950  -  total flux cleaned = -0.00308313 Jy
! Component: 1000  -  total flux cleaned = -0.00299501 Jy
! Component: 1050  -  total flux cleaned = -0.00317162 Jy
! Component: 1100  -  total flux cleaned = -0.00317133 Jy
! Component: 1150  -  total flux cleaned = -0.00308555 Jy
! Component: 1200  -  total flux cleaned = -0.00325753 Jy
! Component: 1250  -  total flux cleaned = -0.00347043 Jy
! Component: 1300  -  total flux cleaned = -0.00325836 Jy
! Component: 1350  -  total flux cleaned = -0.00325849 Jy
! Component: 1400  -  total flux cleaned = -0.00342581 Jy
! Component: 1450  -  total flux cleaned = -0.00359138 Jy
! Component: 1500  -  total flux cleaned = -0.00367335 Jy
! Component: 1550  -  total flux cleaned = -0.00371473 Jy
! Component: 1600  -  total flux cleaned = -0.00387697 Jy
! Component: 1650  -  total flux cleaned = -0.00399785 Jy
! Component: 1700  -  total flux cleaned = -0.00395742 Jy
! Component: 1750  -  total flux cleaned = -0.00399762 Jy
! Component: 1800  -  total flux cleaned = -0.00407656 Jy
! Component: 1850  -  total flux cleaned = -0.00419481 Jy
! Component: 1900  -  total flux cleaned = -0.00423349 Jy
! Component: 1950  -  total flux cleaned = -0.00431146 Jy
! Component: 2000  -  total flux cleaned = -0.00446622 Jy
! Component: 2050  -  total flux cleaned = -0.00435065 Jy
! Component: 2100  -  total flux cleaned = -0.00450356 Jy
! Component: 2150  -  total flux cleaned = -0.00454141 Jy
! Component: 2200  -  total flux cleaned = -0.00457923 Jy
! Component: 2250  -  total flux cleaned = -0.00450398 Jy
! Component: 2300  -  total flux cleaned = -0.00472892 Jy
! Component: 2350  -  total flux cleaned = -0.00469124 Jy
! Component: 2400  -  total flux cleaned = -0.00495087 Jy
! Component: 2450  -  total flux cleaned = -0.00498735 Jy
! Component: 2500  -  total flux cleaned = -0.00502414 Jy
! Component: 2550  -  total flux cleaned = -0.00509728 Jy
! Component: 2600  -  total flux cleaned = -0.00513392 Jy
! Component: 2650  -  total flux cleaned = -0.0052423 Jy
! Component: 2700  -  total flux cleaned = -0.00527828 Jy
! Component: 2750  -  total flux cleaned = -0.00538549 Jy
! Component: 2800  -  total flux cleaned = -0.00549267 Jy
! Component: 2850  -  total flux cleaned = -0.00542156 Jy
! Component: 2900  -  total flux cleaned = -0.0055983 Jy
! Component: 2950  -  total flux cleaned = -0.0056336 Jy
! Component: 3000  -  total flux cleaned = -0.0057385 Jy
! Component: 3050  -  total flux cleaned = -0.00580817 Jy
! Component: 3100  -  total flux cleaned = -0.00594702 Jy
! Component: 3150  -  total flux cleaned = -0.00587774 Jy
! Component: 3200  -  total flux cleaned = -0.00608402 Jy
! Component: 3250  -  total flux cleaned = -0.00635817 Jy
! Component: 3300  -  total flux cleaned = -0.00656289 Jy
! Component: 3350  -  total flux cleaned = -0.00666463 Jy
! Component: 3400  -  total flux cleaned = -0.00666447 Jy
! Component: 3450  -  total flux cleaned = -0.00683311 Jy
! Component: 3500  -  total flux cleaned = -0.00700076 Jy
! Component: 3550  -  total flux cleaned = -0.00700051 Jy
! Component: 3600  -  total flux cleaned = -0.00713384 Jy
! Component: 3650  -  total flux cleaned = -0.00733299 Jy
! Component: 3700  -  total flux cleaned = -0.00746523 Jy
! Component: 3750  -  total flux cleaned = -0.0075966 Jy
! Component: 3800  -  total flux cleaned = -0.00756377 Jy
! Component: 3850  -  total flux cleaned = -0.00785765 Jy
! Component: 3900  -  total flux cleaned = -0.00798787 Jy
! Component: 3950  -  total flux cleaned = -0.00795572 Jy
! Component: 4000  -  total flux cleaned = -0.00818156 Jy
! Component: 4050  -  total flux cleaned = -0.00821362 Jy
! Total flux subtracted in 4096 components = -0.00827774 Jy
! Clean residual min=-0.001870 max=0.001849 Jy/beam
! Clean residual mean=0.000008 rms=0.000558 Jy/beam
! Combined flux in latest and established models = 0.507001 Jy
keep
! Adding 373 model components to the UV plane model.
! The established model now contains 495 components and 0.507001 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv118_uvs/J1516+1932_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.497 x 3.043 at 25.74 degrees (North through East)
! Clean map  min=-0.0028191  max=0.40693 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv118_uvs/J1516+1932_S_map.fits
wmodel /scr/pima/rv118_uvs/J1516+1932_S_map.mod
! Writing 495 model components to file: /scr/pima/rv118_uvs/J1516+1932_S_map.mod
wobs   /scr/pima/rv118_uvs/J1516+1932_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv118_uvs/J1516+1932_S_uvs.fits
wwins  /scr/pima/rv118_uvs/J1516+1932_S_map.win
! wwins: Wrote 6 windows to /scr/pima/rv118_uvs/J1516+1932_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.406929 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000557338 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.410887 0.410887 0.821773 1.64355 3.28709 6.57419 13.1484 26.2967 52.5935
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0016 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.406 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  730.128 
quit
! Quitting program
! Log file /scr/pima/rv118_uvs/J1516+1932_S_dfm.log closed on Sun Dec 10 00:10:32 2017