! Started logfile: /scr/pima/rv118_uvs/J1336-3357_X_dfm.log on Sun Dec 10 00:09:45 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv118_uvs/J1336-3357_X_uva.fits ! Reading UV FITS file: /scr/pima/rv118_uvs/J1336-3357_X_uva.fits ! AN table 1: 22 integrations on 28 of 28 possible baselines. ! AN table 2: 22 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.978896 visibilities/baseline/integration-bin. ! Found source: J1336-3357 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 4824 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1336-3357_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.016929Jy sigma=15.553227 ! Fit after self-cal, rms=0.834361Jy sigma=12.515720 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7906 mas, bmaj=3.757 mas, bpa=13.19 degrees ! Estimated noise=1.1405 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.114436 Jy ! Component: 100 - total flux cleaned = 0.160923 Jy ! Total flux subtracted in 100 components = 0.160923 Jy ! Clean residual min=-0.008240 max=0.022261 Jy/beam ! Clean residual mean=0.000005 rms=0.003096 Jy/beam ! Combined flux in latest and established models = 0.160923 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.160923 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088091Jy sigma=1.317879 ! Fit after self-cal, rms=0.087937Jy sigma=1.316252 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0265495 Jy ! Component: 100 - total flux cleaned = 0.0433243 Jy ! Total flux subtracted in 100 components = 0.0433243 Jy ! Clean residual min=-0.005479 max=0.009938 Jy/beam ! Clean residual mean=0.000002 rms=0.001783 Jy/beam ! Combined flux in latest and established models = 0.204247 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 62 components and 0.204247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074249Jy sigma=1.036042 ! Fit after self-cal, rms=0.074195Jy sigma=1.035690 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.061 mas, bmaj=4.602 mas, bpa=11.04 degrees ! Estimated noise=0.690704 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0200512 Jy ! Component: 100 - total flux cleaned = 0.0307397 Jy ! Component: 150 - total flux cleaned = 0.0370806 Jy ! Component: 200 - total flux cleaned = 0.0409025 Jy ! Total flux subtracted in 200 components = 0.0409025 Jy ! Clean residual min=-0.004173 max=0.007395 Jy/beam ! Clean residual mean=-0.000008 rms=0.001326 Jy/beam ! Combined flux in latest and established models = 0.24515 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 101 components and 0.24515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069566Jy sigma=0.932232 ! Fit after self-cal, rms=0.069562Jy sigma=0.931913 ! Inverting map ! Added new window around map position (-2.8, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00719132 Jy ! Component: 100 - total flux cleaned = 0.0108566 Jy ! Component: 150 - total flux cleaned = 0.0123908 Jy ! Component: 200 - total flux cleaned = 0.0132866 Jy ! Total flux subtracted in 200 components = 0.0132866 Jy ! Clean residual min=-0.003644 max=0.004642 Jy/beam ! Clean residual mean=-0.000001 rms=0.000911 Jy/beam ! Combined flux in latest and established models = 0.258437 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 149 components and 0.258437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068855Jy sigma=0.918149 ! Fit after self-cal, rms=0.068775Jy sigma=0.916665 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.061 x 4.602 at 11.04 degrees (North through East) ! Clean map min=-0.0036126 max=0.15448 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 HN 1.18 KP 0.98 LA 1.01 ! NL 1.00 OV 1.00 PT 0.97 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.01 KP 0.99 LA 1.04 ! NL 1.13 OV 1.01 PT 0.96 SC 1.12 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.96 HN 1.12 KP 0.98 LA 1.01 ! NL 1.03 OV 1.01 PT 0.98 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.99 KP 1.00 LA 1.01 ! NL 1.09 OV 1.00 PT 0.99 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.95 HN 1.15 KP 0.98 LA 1.01 ! NL 0.99 OV 1.00 PT 0.97 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.98 KP 0.99 LA 1.03 ! NL 1.08 OV 0.99 PT 0.98 SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.06 HN 1.00 KP 0.98 LA 0.96 ! NL 0.94 OV 0.99 PT 0.99 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.97 KP 0.98 LA 1.02 ! NL 1.05 OV 0.98 PT 1.01 SC 0.88 ! ! ! Fit before self-cal, rms=0.068775Jy sigma=0.916665 ! Fit after self-cal, rms=0.069975Jy sigma=0.907676 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.061 mas, bmaj=4.672 mas, bpa=11.21 degrees ! Estimated noise=0.696494 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000275296 Jy ! Component: 100 - total flux cleaned = 0.000289518 Jy ! Component: 150 - total flux cleaned = 0.000333644 Jy ! Component: 200 - total flux cleaned = 0.000333029 Jy ! Total flux subtracted in 200 components = 0.000333029 Jy ! Clean residual min=-0.002780 max=0.002801 Jy/beam ! Clean residual mean=0.000000 rms=0.000660 Jy/beam ! Combined flux in latest and established models = 0.25877 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 171 components and 0.25877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069885Jy sigma=0.906595 ! Fit after self-cal, rms=0.069922Jy sigma=0.906482 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069922Jy sigma=0.906482 ! Fit after self-cal, rms=0.070068Jy sigma=0.906349 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.06 mas, bmaj=4.685 mas, bpa=11.25 degrees ! Estimated noise=0.694909 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000462799 Jy ! Component: 100 - total flux cleaned = -0.000506492 Jy ! Component: 150 - total flux cleaned = -0.000436475 Jy ! Component: 200 - total flux cleaned = -0.00043699 Jy ! Total flux subtracted in 200 components = -0.00043699 Jy ! Clean residual min=-0.002671 max=0.002701 Jy/beam ! Clean residual mean=0.000000 rms=0.000637 Jy/beam ! Combined flux in latest and established models = 0.258333 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 182 components and 0.258333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070014Jy sigma=0.905785 ! Fit after self-cal, rms=0.070011Jy sigma=0.905759 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (11.6, -26.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149929 Jy ! Component: 100 - total flux cleaned = 0.00111119 Jy ! Component: 150 - total flux cleaned = 0.000843493 Jy ! Component: 200 - total flux cleaned = 0.000843487 Jy ! Total flux subtracted in 200 components = 0.000843487 Jy ! Clean residual min=-0.002425 max=0.002304 Jy/beam ! Clean residual mean=0.000001 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.259176 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 200 components and 0.259176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069851Jy sigma=0.904170 ! Fit after self-cal, rms=0.069857Jy sigma=0.904097 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069857Jy sigma=0.904097 ! Fit after self-cal, rms=0.069898Jy sigma=0.903866 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.06 mas, bmaj=4.697 mas, bpa=11.27 degrees ! Estimated noise=0.692566 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.70574e-05 Jy ! Component: 100 - total flux cleaned = -3.96243e-05 Jy ! Component: 150 - total flux cleaned = -0.000226397 Jy ! Component: 200 - total flux cleaned = -0.000327796 Jy ! Total flux subtracted in 200 components = -0.000327796 Jy ! Clean residual min=-0.002359 max=0.002260 Jy/beam ! Clean residual mean=0.000001 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.258848 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 213 components and 0.258848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069837Jy sigma=0.903330 ! Fit after self-cal, rms=0.069846Jy sigma=0.903306 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.11808e-05 Jy ! Component: 100 - total flux cleaned = -9.12492e-05 Jy ! Component: 150 - total flux cleaned = -0.000119573 Jy ! Component: 200 - total flux cleaned = -0.000145946 Jy ! Total flux subtracted in 200 components = -0.000145946 Jy ! Clean residual min=-0.002317 max=0.002223 Jy/beam ! Clean residual mean=0.000001 rms=0.000562 Jy/beam ! Combined flux in latest and established models = 0.258702 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 231 components and 0.258702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069817Jy sigma=0.903029 ! Fit after self-cal, rms=0.069818Jy sigma=0.903023 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069818Jy sigma=0.903023 ! Fit after self-cal, rms=0.069696Jy sigma=0.902917 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.518 mas, bmaj=7.934 mas, bpa=-1.61 degrees ! Estimated noise=0.770326 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000611806 Jy ! Component: 100 - total flux cleaned = -0.000835971 Jy ! Component: 150 - total flux cleaned = -0.000928228 Jy ! Component: 200 - total flux cleaned = -0.00094884 Jy ! Total flux subtracted in 200 components = -0.00094884 Jy ! Clean residual min=-0.001853 max=0.002304 Jy/beam ! Clean residual mean=0.000002 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.257754 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 248 components and 0.257754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069678Jy sigma=0.902767 ! Fit after self-cal, rms=0.069677Jy sigma=0.902752 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.62948e-05 Jy ! Component: 100 - total flux cleaned = 2.59535e-05 Jy ! Component: 150 - total flux cleaned = 2.58497e-05 Jy ! Component: 200 - total flux cleaned = 4.31225e-05 Jy ! Total flux subtracted in 200 components = 4.31225e-05 Jy ! Clean residual min=-0.001793 max=0.002246 Jy/beam ! Clean residual mean=0.000002 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 0.257797 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 262 components and 0.257797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069672Jy sigma=0.902739 ! Fit after self-cal, rms=0.069672Jy sigma=0.902733 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.06 mas, bmaj=4.702 mas, bpa=11.28 degrees ! Estimated noise=0.690987 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.06 x 4.702 at 11.28 degrees (North through East) ! Clean map min=-0.0025319 max=0.1547 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7859 mas, bmaj=3.843 mas, bpa=13.36 degrees ! Estimated noise=1.14381 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.114983 Jy ! Component: 100 - total flux cleaned = 0.161889 Jy ! Component: 150 - total flux cleaned = 0.187668 Jy ! Component: 200 - total flux cleaned = 0.203435 Jy ! Total flux subtracted in 200 components = 0.203435 Jy ! Clean residual min=-0.005462 max=0.008453 Jy/beam ! Clean residual mean=0.000001 rms=0.001602 Jy/beam ! Combined flux in latest and established models = 0.203435 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 50 model components to the UV plane model. ! The established model now contains 50 components and 0.203435 Jy ! Inverting map and beam ! Estimated beam: bmin=1.06 mas, bmaj=4.702 mas, bpa=11.28 degrees ! Estimated noise=0.690987 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0190072 Jy ! Component: 100 - total flux cleaned = 0.0297559 Jy ! Component: 150 - total flux cleaned = 0.0369496 Jy ! Component: 200 - total flux cleaned = 0.0421378 Jy ! Total flux subtracted in 200 components = 0.0421378 Jy ! Clean residual min=-0.002692 max=0.003755 Jy/beam ! Clean residual mean=-0.000003 rms=0.000945 Jy/beam ! Combined flux in latest and established models = 0.245573 Jy ! Adding 96 model components to the UV plane model. ! The established model now contains 133 components and 0.245573 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.518 mas, bmaj=7.934 mas, bpa=-1.61 degrees ! Estimated noise=0.770326 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00544576 Jy ! Component: 100 - total flux cleaned = 0.00802378 Jy ! Component: 150 - total flux cleaned = 0.00918117 Jy ! Component: 200 - total flux cleaned = 0.00970989 Jy ! Total flux subtracted in 200 components = 0.00970989 Jy ! Clean residual min=-0.002447 max=0.002311 Jy/beam ! Clean residual mean=0.000001 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 0.255283 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000443085 Jy ! Component: 100 - total flux cleaned = 0.000662433 Jy ! Component: 150 - total flux cleaned = 0.000804772 Jy ! Component: 200 - total flux cleaned = 0.000893319 Jy ! Total flux subtracted in 200 components = 0.000893319 Jy ! Clean residual min=-0.002156 max=0.002225 Jy/beam ! Clean residual mean=0.000002 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.256176 Jy ! Adding 99 model components to the UV plane model. ! The established model now contains 214 components and 0.256176 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.06 mas, bmaj=4.702 mas, bpa=11.28 degrees ! Estimated noise=0.690987 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000302798 Jy ! Component: 100 - total flux cleaned = -0.000303728 Jy ! Component: 150 - total flux cleaned = -0.000354212 Jy ! Component: 200 - total flux cleaned = -0.00035234 Jy ! Total flux subtracted in 200 components = -0.00035234 Jy ! Clean residual min=-0.002257 max=0.002304 Jy/beam ! Clean residual mean=0.000001 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.255824 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 237 components and 0.255824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069758Jy sigma=0.903909 ! Fit after self-cal, rms=0.069740Jy sigma=0.903683 wmodel J1336-3357_X_map.mod ! Writing 237 model components to file: J1336-3357_X_map.mod wobs J1336-3357_X_uvs.fits ! Writing UV FITS file: J1336-3357_X_uvs.fits wwins J1336-3357_X_map.win ! wwins: Wrote 3 windows to J1336-3357_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000158664 Jy ! Component: 100 - total flux cleaned = 0.00027338 Jy ! Component: 150 - total flux cleaned = 0.000524424 Jy ! Component: 200 - total flux cleaned = 0.000696198 Jy ! Component: 250 - total flux cleaned = 0.000795327 Jy ! Component: 300 - total flux cleaned = 0.0007637 Jy ! Component: 350 - total flux cleaned = 0.000701895 Jy ! Component: 400 - total flux cleaned = 0.000672348 Jy ! Component: 450 - total flux cleaned = 0.000643709 Jy ! Component: 500 - total flux cleaned = 0.000500077 Jy ! Component: 550 - total flux cleaned = 0.000415819 Jy ! Component: 600 - total flux cleaned = 0.000359966 Jy ! Component: 650 - total flux cleaned = 0.000277926 Jy ! Component: 700 - total flux cleaned = 0.000251168 Jy ! Component: 750 - total flux cleaned = 0.00022502 Jy ! Component: 800 - total flux cleaned = 0.000353685 Jy ! Component: 850 - total flux cleaned = 0.000505592 Jy ! Component: 900 - total flux cleaned = 0.000580551 Jy ! Component: 950 - total flux cleaned = 0.00072857 Jy ! Component: 1000 - total flux cleaned = 0.000850319 Jy ! Component: 1050 - total flux cleaned = 0.000946337 Jy ! Component: 1100 - total flux cleaned = 0.001041 Jy ! Component: 1150 - total flux cleaned = 0.00111086 Jy ! Component: 1200 - total flux cleaned = 0.00113376 Jy ! Component: 1250 - total flux cleaned = 0.00127091 Jy ! Component: 1300 - total flux cleaned = 0.00133865 Jy ! Component: 1350 - total flux cleaned = 0.00147251 Jy ! Component: 1400 - total flux cleaned = 0.00151651 Jy ! Component: 1450 - total flux cleaned = 0.00166945 Jy ! Component: 1500 - total flux cleaned = 0.0016909 Jy ! Component: 1550 - total flux cleaned = 0.00179791 Jy ! Component: 1600 - total flux cleaned = 0.00186166 Jy ! Component: 1650 - total flux cleaned = 0.00200842 Jy ! Component: 1700 - total flux cleaned = 0.00200831 Jy ! Component: 1750 - total flux cleaned = 0.00213166 Jy ! Component: 1800 - total flux cleaned = 0.00221286 Jy ! Component: 1850 - total flux cleaned = 0.00219312 Jy ! Component: 1900 - total flux cleaned = 0.00231318 Jy ! Component: 1950 - total flux cleaned = 0.0023921 Jy ! Component: 2000 - total flux cleaned = 0.00241182 Jy ! Component: 2050 - total flux cleaned = 0.00248976 Jy ! Component: 2100 - total flux cleaned = 0.00248973 Jy ! Component: 2150 - total flux cleaned = 0.00256655 Jy ! Component: 2200 - total flux cleaned = 0.00260444 Jy ! Component: 2250 - total flux cleaned = 0.00262319 Jy ! Component: 2300 - total flux cleaned = 0.00273457 Jy ! Component: 2350 - total flux cleaned = 0.0027529 Jy ! Component: 2400 - total flux cleaned = 0.00282608 Jy ! Component: 2450 - total flux cleaned = 0.00288059 Jy ! Component: 2500 - total flux cleaned = 0.00291677 Jy ! Component: 2550 - total flux cleaned = 0.00297034 Jy ! Component: 2600 - total flux cleaned = 0.00300587 Jy ! Component: 2650 - total flux cleaned = 0.00309411 Jy ! Component: 2700 - total flux cleaned = 0.00311171 Jy ! Component: 2750 - total flux cleaned = 0.0031984 Jy ! Component: 2800 - total flux cleaned = 0.00321574 Jy ! Component: 2850 - total flux cleaned = 0.00328423 Jy ! Component: 2900 - total flux cleaned = 0.0033183 Jy ! Component: 2950 - total flux cleaned = 0.00333545 Jy ! Component: 3000 - total flux cleaned = 0.00346992 Jy ! Component: 3050 - total flux cleaned = 0.00346992 Jy ! Component: 3100 - total flux cleaned = 0.00360272 Jy ! Component: 3150 - total flux cleaned = 0.00361901 Jy ! Component: 3200 - total flux cleaned = 0.00368475 Jy ! Component: 3250 - total flux cleaned = 0.00370091 Jy ! Component: 3300 - total flux cleaned = 0.0037982 Jy ! Component: 3350 - total flux cleaned = 0.00383037 Jy ! Component: 3400 - total flux cleaned = 0.00386237 Jy ! Component: 3450 - total flux cleaned = 0.00392631 Jy ! Component: 3500 - total flux cleaned = 0.00394227 Jy ! Component: 3550 - total flux cleaned = 0.00405286 Jy ! Component: 3600 - total flux cleaned = 0.00411583 Jy ! Component: 3650 - total flux cleaned = 0.00414706 Jy ! Component: 3700 - total flux cleaned = 0.00424046 Jy ! Component: 3750 - total flux cleaned = 0.0042095 Jy ! Component: 3800 - total flux cleaned = 0.0042557 Jy ! Component: 3850 - total flux cleaned = 0.0043017 Jy ! Component: 3900 - total flux cleaned = 0.00433218 Jy ! Component: 3950 - total flux cleaned = 0.00437787 Jy ! Component: 4000 - total flux cleaned = 0.00439301 Jy ! Component: 4050 - total flux cleaned = 0.0044684 Jy ! Total flux subtracted in 4096 components = 0.00446842 Jy ! Clean residual min=-0.000878 max=0.000968 Jy/beam ! Clean residual mean=0.000001 rms=0.000275 Jy/beam ! Combined flux in latest and established models = 0.260292 Jy keep ! Adding 267 model components to the UV plane model. ! The established model now contains 504 components and 0.260292 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv118_uvs/J1336-3357_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.06 x 4.702 at 11.28 degrees (North through East) ! Clean map min=-0.0020921 max=0.1571 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv118_uvs/J1336-3357_X_map.fits wmodel /scr/pima/rv118_uvs/J1336-3357_X_map.mod ! Writing 504 model components to file: /scr/pima/rv118_uvs/J1336-3357_X_map.mod wobs /scr/pima/rv118_uvs/J1336-3357_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv118_uvs/J1336-3357_X_uvs.fits wwins /scr/pima/rv118_uvs/J1336-3357_X_map.win ! wwins: Wrote 4 windows to /scr/pima/rv118_uvs/J1336-3357_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.1571 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000271961 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.519342 0.519342 1.03868 2.07737 4.15474 8.30947 16.6189 33.2379 66.4758 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.157 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 577.654 quit ! Quitting program ! Log file /scr/pima/rv118_uvs/J1336-3357_X_dfm.log closed on Sun Dec 10 00:09:49 2017