! Started logfile: /scr/pima/rv118_uvs/J1336-1529_X_dfm.log on Sun Dec 10 00:09:41 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv118_uvs/J1336-1529_X_uva.fits ! Reading UV FITS file: /scr/pima/rv118_uvs/J1336-1529_X_uva.fits ! AN table 1: 29 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.998084 visibilities/baseline/integration-bin. ! Found source: J1336-1529 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 4168 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1336-1529_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.011554Jy sigma=19.699479 ! Fit after self-cal, rms=0.903730Jy sigma=17.582690 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8206 mas, bmaj=3.425 mas, bpa=22.16 degrees ! Estimated noise=1.03986 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0743729 Jy ! Component: 100 - total flux cleaned = 0.0907951 Jy ! Total flux subtracted in 100 components = 0.0907951 Jy ! Clean residual min=-0.005075 max=0.005958 Jy/beam ! Clean residual mean=-0.000003 rms=0.001269 Jy/beam ! Combined flux in latest and established models = 0.0907951 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0907951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055284Jy sigma=0.956396 ! Fit after self-cal, rms=0.055276Jy sigma=0.956008 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.072 mas, bmaj=3.724 mas, bpa=20.88 degrees ! Estimated noise=0.58144 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00750176 Jy ! Component: 100 - total flux cleaned = 0.0112202 Jy ! Component: 150 - total flux cleaned = 0.013427 Jy ! Component: 200 - total flux cleaned = 0.0148022 Jy ! Total flux subtracted in 200 components = 0.0148022 Jy ! Clean residual min=-0.002326 max=0.002435 Jy/beam ! Clean residual mean=-0.000002 rms=0.000634 Jy/beam ! Combined flux in latest and established models = 0.105597 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 35 components and 0.105597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054365Jy sigma=0.933609 ! Fit after self-cal, rms=0.054373Jy sigma=0.933370 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.072 x 3.724 at 20.88 degrees (North through East) ! Clean map min=-0.0022365 max=0.097389 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 1.04 KP 1.03 ! LA 1.02 NL 0.98 OV 1.06 PT 0.95 ! SC 1.06 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.04 KP 1.02 ! LA 0.99 NL 0.96 OV 1.04 PT 1.01 ! SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.98 HN 1.02 KP 0.98 ! LA 1.00 NL 0.98 OV 0.98 PT 0.93 ! SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 1.01 KP 0.97 ! LA 1.01 NL 0.96 OV 0.98 PT 0.98 ! SC 0.95 ! ! ! Fit before self-cal, rms=0.054373Jy sigma=0.933370 ! Fit after self-cal, rms=0.053808Jy sigma=0.929587 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.079 mas, bmaj=3.734 mas, bpa=20.89 degrees ! Estimated noise=0.578701 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.37444e-05 Jy ! Component: 100 - total flux cleaned = 0.000124424 Jy ! Component: 150 - total flux cleaned = 0.00019649 Jy ! Component: 200 - total flux cleaned = 0.000297554 Jy ! Total flux subtracted in 200 components = 0.000297554 Jy ! Clean residual min=-0.002036 max=0.002095 Jy/beam ! Clean residual mean=-0.000002 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.105895 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 45 components and 0.105895 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053790Jy sigma=0.929302 ! Fit after self-cal, rms=0.053803Jy sigma=0.929232 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053803Jy sigma=0.929232 ! Fit after self-cal, rms=0.053830Jy sigma=0.929217 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.08 mas, bmaj=3.734 mas, bpa=20.86 degrees ! Estimated noise=0.578606 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.55647e-05 Jy ! Component: 100 - total flux cleaned = 0.000116679 Jy ! Component: 150 - total flux cleaned = 0.000163169 Jy ! Component: 200 - total flux cleaned = 0.000206968 Jy ! Total flux subtracted in 200 components = 0.000206968 Jy ! Clean residual min=-0.002001 max=0.002060 Jy/beam ! Clean residual mean=-0.000002 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.106102 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 50 components and 0.106102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053819Jy sigma=0.929039 ! Fit after self-cal, rms=0.053819Jy sigma=0.929026 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.74829e-06 Jy ! Component: 100 - total flux cleaned = 3.57231e-05 Jy ! Component: 150 - total flux cleaned = 7.53621e-05 Jy ! Component: 200 - total flux cleaned = 8.90695e-05 Jy ! Total flux subtracted in 200 components = 8.90695e-05 Jy ! Clean residual min=-0.001973 max=0.002039 Jy/beam ! Clean residual mean=-0.000002 rms=0.000531 Jy/beam ! Combined flux in latest and established models = 0.106191 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 53 components and 0.106191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053812Jy sigma=0.928909 ! Fit after self-cal, rms=0.053811Jy sigma=0.928900 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053811Jy sigma=0.928900 ! Fit after self-cal, rms=0.053931Jy sigma=0.928832 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.082 mas, bmaj=3.735 mas, bpa=20.83 degrees ! Estimated noise=0.579213 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000147793 Jy ! Component: 100 - total flux cleaned = 0.000201985 Jy ! Component: 150 - total flux cleaned = 0.00022578 Jy ! Component: 200 - total flux cleaned = 0.000248522 Jy ! Total flux subtracted in 200 components = 0.000248522 Jy ! Clean residual min=-0.001938 max=0.002044 Jy/beam ! Clean residual mean=-0.000002 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.106439 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 55 components and 0.106439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053924Jy sigma=0.928734 ! Fit after self-cal, rms=0.053926Jy sigma=0.928726 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.93045e-05 Jy ! Component: 100 - total flux cleaned = 3.0295e-05 Jy ! Component: 150 - total flux cleaned = 5.10185e-05 Jy ! Component: 200 - total flux cleaned = 6.08642e-05 Jy ! Total flux subtracted in 200 components = 6.08642e-05 Jy ! Clean residual min=-0.001922 max=0.002046 Jy/beam ! Clean residual mean=-0.000002 rms=0.000527 Jy/beam ! Combined flux in latest and established models = 0.1065 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 60 components and 0.1065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053921Jy sigma=0.928663 ! Fit after self-cal, rms=0.053921Jy sigma=0.928658 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053921Jy sigma=0.928658 ! Fit after self-cal, rms=0.053980Jy sigma=0.928593 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.16 mas, bmaj=4.814 mas, bpa=10.13 degrees ! Estimated noise=0.642322 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000750251 Jy ! Component: 100 - total flux cleaned = 0.000812773 Jy ! Component: 150 - total flux cleaned = 0.000835602 Jy ! Component: 200 - total flux cleaned = 0.000835789 Jy ! Total flux subtracted in 200 components = 0.000835789 Jy ! Clean residual min=-0.001834 max=0.002052 Jy/beam ! Clean residual mean=-0.000003 rms=0.000543 Jy/beam ! Combined flux in latest and established models = 0.107336 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 71 components and 0.107336 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053982Jy sigma=0.928617 ! Fit after self-cal, rms=0.053982Jy sigma=0.928583 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.19151e-05 Jy ! Component: 100 - total flux cleaned = 8.19439e-05 Jy ! Component: 150 - total flux cleaned = 9.96806e-05 Jy ! Component: 200 - total flux cleaned = 0.000116252 Jy ! Total flux subtracted in 200 components = 0.000116252 Jy ! Clean residual min=-0.001818 max=0.002043 Jy/beam ! Clean residual mean=-0.000003 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.107452 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 76 components and 0.107452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053984Jy sigma=0.928617 ! Fit after self-cal, rms=0.053984Jy sigma=0.928606 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.083 mas, bmaj=3.735 mas, bpa=20.8 degrees ! Estimated noise=0.579548 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.083 x 3.735 at 20.8 degrees (North through East) ! Clean map min=-0.0018147 max=0.097257 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8291 mas, bmaj=3.425 mas, bpa=22.09 degrees ! Estimated noise=1.04687 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0748117 Jy ! Component: 100 - total flux cleaned = 0.0912511 Jy ! Component: 150 - total flux cleaned = 0.0961557 Jy ! Component: 200 - total flux cleaned = 0.098962 Jy ! Total flux subtracted in 200 components = 0.098962 Jy ! Clean residual min=-0.004441 max=0.004102 Jy/beam ! Clean residual mean=-0.000004 rms=0.001064 Jy/beam ! Combined flux in latest and established models = 0.098962 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.098962 Jy ! Inverting map and beam ! Estimated beam: bmin=1.083 mas, bmaj=3.735 mas, bpa=20.8 degrees ! Estimated noise=0.579548 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.6, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0036973 Jy ! Component: 100 - total flux cleaned = 0.0058924 Jy ! Component: 150 - total flux cleaned = 0.00696337 Jy ! Component: 200 - total flux cleaned = 0.00790263 Jy ! Total flux subtracted in 200 components = 0.00790263 Jy ! Clean residual min=-0.001843 max=0.001975 Jy/beam ! Clean residual mean=-0.000002 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.106865 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 42 components and 0.106865 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.16 mas, bmaj=4.814 mas, bpa=10.13 degrees ! Estimated noise=0.642322 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00135312 Jy ! Component: 100 - total flux cleaned = 0.00223908 Jy ! Component: 150 - total flux cleaned = 0.00288303 Jy ! Component: 200 - total flux cleaned = 0.00338618 Jy ! Total flux subtracted in 200 components = 0.00338618 Jy ! Clean residual min=-0.001531 max=0.001644 Jy/beam ! Clean residual mean=-0.000002 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.110251 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000369349 Jy ! Component: 100 - total flux cleaned = 0.000506337 Jy ! Component: 150 - total flux cleaned = 0.00061874 Jy ! Component: 200 - total flux cleaned = 0.000665077 Jy ! Total flux subtracted in 200 components = 0.000665077 Jy ! Clean residual min=-0.001492 max=0.001659 Jy/beam ! Clean residual mean=-0.000001 rms=0.000428 Jy/beam ! Combined flux in latest and established models = 0.110916 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 96 components and 0.110916 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.083 mas, bmaj=3.735 mas, bpa=20.8 degrees ! Estimated noise=0.579548 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000331492 Jy ! Component: 100 - total flux cleaned = -0.000244592 Jy ! Component: 150 - total flux cleaned = -0.000192018 Jy ! Component: 200 - total flux cleaned = -0.000144686 Jy ! Total flux subtracted in 200 components = -0.000144686 Jy ! Clean residual min=-0.001647 max=0.001894 Jy/beam ! Clean residual mean=-0.000001 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.110771 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 112 components and 0.110771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053866Jy sigma=0.926072 ! Fit after self-cal, rms=0.053863Jy sigma=0.925948 wmodel J1336-1529_X_map.mod ! Writing 112 model components to file: J1336-1529_X_map.mod wobs J1336-1529_X_uvs.fits ! Writing UV FITS file: J1336-1529_X_uvs.fits wwins J1336-1529_X_map.win ! wwins: Wrote 2 windows to J1336-1529_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000756892 Jy ! Component: 100 - total flux cleaned = 0.00125085 Jy ! Component: 150 - total flux cleaned = 0.00136744 Jy ! Component: 200 - total flux cleaned = 0.00128542 Jy ! Component: 250 - total flux cleaned = 0.00117858 Jy ! Component: 300 - total flux cleaned = 0.00117839 Jy ! Component: 350 - total flux cleaned = 0.00115326 Jy ! Component: 400 - total flux cleaned = 0.00115321 Jy ! Component: 450 - total flux cleaned = 0.00117661 Jy ! Component: 500 - total flux cleaned = 0.00117678 Jy ! Component: 550 - total flux cleaned = 0.0011773 Jy ! Component: 600 - total flux cleaned = 0.00117781 Jy ! Component: 650 - total flux cleaned = 0.00119996 Jy ! Component: 700 - total flux cleaned = 0.00124251 Jy ! Component: 750 - total flux cleaned = 0.00124256 Jy ! Component: 800 - total flux cleaned = 0.00130394 Jy ! Component: 850 - total flux cleaned = 0.00130379 Jy ! Component: 900 - total flux cleaned = 0.00130344 Jy ! Component: 950 - total flux cleaned = 0.00126518 Jy ! Component: 1000 - total flux cleaned = 0.00126546 Jy ! Component: 1050 - total flux cleaned = 0.00126546 Jy ! Component: 1100 - total flux cleaned = 0.00119209 Jy ! Component: 1150 - total flux cleaned = 0.00121023 Jy ! Component: 1200 - total flux cleaned = 0.00124561 Jy ! Component: 1250 - total flux cleaned = 0.00122822 Jy ! Component: 1300 - total flux cleaned = 0.00126282 Jy ! Component: 1350 - total flux cleaned = 0.00127959 Jy ! Component: 1400 - total flux cleaned = 0.00124635 Jy ! Component: 1450 - total flux cleaned = 0.00126322 Jy ! Component: 1500 - total flux cleaned = 0.00129625 Jy ! Component: 1550 - total flux cleaned = 0.00134466 Jy ! Component: 1600 - total flux cleaned = 0.00131302 Jy ! Component: 1650 - total flux cleaned = 0.00125025 Jy ! Component: 1700 - total flux cleaned = 0.00120406 Jy ! Component: 1750 - total flux cleaned = 0.00118866 Jy ! Component: 1800 - total flux cleaned = 0.00112819 Jy ! Component: 1850 - total flux cleaned = 0.00108365 Jy ! Component: 1900 - total flux cleaned = 0.00102474 Jy ! Component: 1950 - total flux cleaned = 0.000981138 Jy ! Component: 2000 - total flux cleaned = 0.000966596 Jy ! Component: 2050 - total flux cleaned = 0.000923747 Jy ! Component: 2100 - total flux cleaned = 0.00090968 Jy ! Component: 2150 - total flux cleaned = 0.000867724 Jy ! Component: 2200 - total flux cleaned = 0.000853603 Jy ! Component: 2250 - total flux cleaned = 0.000826132 Jy ! Component: 2300 - total flux cleaned = 0.000812379 Jy ! Component: 2350 - total flux cleaned = 0.000771968 Jy ! Component: 2400 - total flux cleaned = 0.000758642 Jy ! Component: 2450 - total flux cleaned = 0.00071923 Jy ! Component: 2500 - total flux cleaned = 0.000758532 Jy ! Component: 2550 - total flux cleaned = 0.000745542 Jy ! Component: 2600 - total flux cleaned = 0.000719848 Jy ! Component: 2650 - total flux cleaned = 0.000707031 Jy ! Component: 2700 - total flux cleaned = 0.000732284 Jy ! Component: 2750 - total flux cleaned = 0.000807388 Jy ! Component: 2800 - total flux cleaned = 0.000770051 Jy ! Component: 2850 - total flux cleaned = 0.000819566 Jy ! Component: 2900 - total flux cleaned = 0.000819529 Jy ! Component: 2950 - total flux cleaned = 0.000819509 Jy ! Component: 3000 - total flux cleaned = 0.000879881 Jy ! Component: 3050 - total flux cleaned = 0.000879881 Jy ! Component: 3100 - total flux cleaned = 0.000927615 Jy ! Component: 3150 - total flux cleaned = 0.000927578 Jy ! Component: 3200 - total flux cleaned = 0.000951145 Jy ! Component: 3250 - total flux cleaned = 0.000986327 Jy ! Component: 3300 - total flux cleaned = 0.00104426 Jy ! Component: 3350 - total flux cleaned = 0.00106722 Jy ! Component: 3400 - total flux cleaned = 0.00105583 Jy ! Component: 3450 - total flux cleaned = 0.00107866 Jy ! Component: 3500 - total flux cleaned = 0.00113517 Jy ! Component: 3550 - total flux cleaned = 0.00113508 Jy ! Component: 3600 - total flux cleaned = 0.00120199 Jy ! Component: 3650 - total flux cleaned = 0.00119099 Jy ! Component: 3700 - total flux cleaned = 0.00119106 Jy ! Component: 3750 - total flux cleaned = 0.00122396 Jy ! Component: 3800 - total flux cleaned = 0.00125655 Jy ! Component: 3850 - total flux cleaned = 0.0012781 Jy ! Component: 3900 - total flux cleaned = 0.0012674 Jy ! Component: 3950 - total flux cleaned = 0.00127805 Jy ! Component: 4000 - total flux cleaned = 0.00127805 Jy ! Component: 4050 - total flux cleaned = 0.0013099 Jy ! Total flux subtracted in 4096 components = 0.00135208 Jy ! Clean residual min=-0.000643 max=0.001024 Jy/beam ! Clean residual mean=0.000001 rms=0.000185 Jy/beam ! Combined flux in latest and established models = 0.112123 Jy keep ! Adding 240 model components to the UV plane model. ! The established model now contains 352 components and 0.112123 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv118_uvs/J1336-1529_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.083 x 3.735 at 20.8 degrees (North through East) ! Clean map min=-0.0012183 max=0.097615 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv118_uvs/J1336-1529_X_map.fits wmodel /scr/pima/rv118_uvs/J1336-1529_X_map.mod ! Writing 352 model components to file: /scr/pima/rv118_uvs/J1336-1529_X_map.mod wobs /scr/pima/rv118_uvs/J1336-1529_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv118_uvs/J1336-1529_X_uvs.fits wwins /scr/pima/rv118_uvs/J1336-1529_X_map.win ! wwins: Wrote 3 windows to /scr/pima/rv118_uvs/J1336-1529_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0976153 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00018204 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.559461 0.559461 1.11892 2.23784 4.47569 8.95137 17.9027 35.8055 71.611 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.097 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 536.23 quit ! Quitting program ! Log file /scr/pima/rv118_uvs/J1336-1529_X_dfm.log closed on Sun Dec 10 00:09:45 2017