! Started logfile: /scr/pima/rv118_uvs/J1048-4114_X_dfm.log on Sun Dec 10 00:09:04 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv118_uvs/J1048-4114_X_uva.fits ! Reading UV FITS file: /scr/pima/rv118_uvs/J1048-4114_X_uva.fits ! AN table 1: 44 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.827922 visibilities/baseline/integration-bin. ! Found source: J1048-4114 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 3060 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1048-4114_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.011616Jy sigma=14.977352 ! Fit after self-cal, rms=0.905051Jy sigma=13.322134 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7484 mas, bmaj=4.358 mas, bpa=16.75 degrees ! Estimated noise=1.67325 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0714955 Jy ! Component: 100 - total flux cleaned = 0.0897795 Jy ! Total flux subtracted in 100 components = 0.0897795 Jy ! Clean residual min=-0.006782 max=0.008796 Jy/beam ! Clean residual mean=0.000036 rms=0.001805 Jy/beam ! Combined flux in latest and established models = 0.0897795 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0897795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070620Jy sigma=0.949675 ! Fit after self-cal, rms=0.070593Jy sigma=0.948759 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.015 mas, bmaj=5.423 mas, bpa=15.8 degrees ! Estimated noise=0.891562 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129717 Jy ! Component: 100 - total flux cleaned = 0.018851 Jy ! Component: 150 - total flux cleaned = 0.0218357 Jy ! Component: 200 - total flux cleaned = 0.0233877 Jy ! Total flux subtracted in 200 components = 0.0233877 Jy ! Clean residual min=-0.005104 max=0.006313 Jy/beam ! Clean residual mean=0.000053 rms=0.001491 Jy/beam ! Combined flux in latest and established models = 0.113167 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 37 components and 0.113167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068649Jy sigma=0.910833 ! Fit after self-cal, rms=0.068656Jy sigma=0.910253 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.015 x 5.423 at 15.8 degrees (North through East) ! Clean map min=-0.0049 max=0.090603 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.07 KP 0.96 LA 0.97 NL 1.10 ! OV 1.07 PT 0.99 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.06 KP 0.97 LA 0.96 NL 1.22 ! OV 1.02 PT 0.99 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.03 KP 1.01 LA 0.94 NL 1.16 ! OV 0.96 PT 1.03 SC 0.94 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 0.98 KP 0.97 LA 0.94 NL 1.08 ! OV 1.00 PT 0.98 SC 1.07 ! ! ! Fit before self-cal, rms=0.068656Jy sigma=0.910253 ! Fit after self-cal, rms=0.070966Jy sigma=0.906072 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.011 mas, bmaj=5.496 mas, bpa=15.95 degrees ! Estimated noise=0.892905 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000491521 Jy ! Component: 100 - total flux cleaned = -0.00048346 Jy ! Component: 150 - total flux cleaned = -0.000516204 Jy ! Component: 200 - total flux cleaned = -0.000547806 Jy ! Total flux subtracted in 200 components = -0.000547806 Jy ! Clean residual min=-0.004533 max=0.006652 Jy/beam ! Clean residual mean=0.000045 rms=0.001375 Jy/beam ! Combined flux in latest and established models = 0.112619 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 45 components and 0.112619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070921Jy sigma=0.905349 ! Fit after self-cal, rms=0.070992Jy sigma=0.905158 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070992Jy sigma=0.905158 ! Fit after self-cal, rms=0.072505Jy sigma=0.900687 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.014 mas, bmaj=5.53 mas, bpa=15.97 degrees ! Estimated noise=0.898656 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000254731 Jy ! Component: 100 - total flux cleaned = -0.00018772 Jy ! Component: 150 - total flux cleaned = -0.000241972 Jy ! Component: 200 - total flux cleaned = -0.000242417 Jy ! Total flux subtracted in 200 components = -0.000242417 Jy ! Clean residual min=-0.004454 max=0.006156 Jy/beam ! Clean residual mean=0.000034 rms=0.001222 Jy/beam ! Combined flux in latest and established models = 0.112377 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 53 components and 0.112377 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072477Jy sigma=0.900302 ! Fit after self-cal, rms=0.072508Jy sigma=0.900202 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7.6, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00528796 Jy ! Component: 100 - total flux cleaned = 0.00759448 Jy ! Component: 150 - total flux cleaned = 0.0079515 Jy ! Component: 200 - total flux cleaned = 0.00825044 Jy ! Total flux subtracted in 200 components = 0.00825044 Jy ! Clean residual min=-0.003423 max=0.004126 Jy/beam ! Clean residual mean=0.000013 rms=0.000956 Jy/beam ! Combined flux in latest and established models = 0.120628 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 84 components and 0.120628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072111Jy sigma=0.893541 ! Fit after self-cal, rms=0.072062Jy sigma=0.892710 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072062Jy sigma=0.892710 ! Fit after self-cal, rms=0.073293Jy sigma=0.891443 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.017 mas, bmaj=5.55 mas, bpa=16.02 degrees ! Estimated noise=0.89595 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00228077 Jy ! Component: 100 - total flux cleaned = 0.00286218 Jy ! Component: 150 - total flux cleaned = 0.00299937 Jy ! Component: 200 - total flux cleaned = 0.00311609 Jy ! Total flux subtracted in 200 components = 0.00311609 Jy ! Clean residual min=-0.003114 max=0.003067 Jy/beam ! Clean residual mean=0.000006 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.123744 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 98 components and 0.123744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073194Jy sigma=0.890021 ! Fit after self-cal, rms=0.073221Jy sigma=0.889866 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0006639 Jy ! Component: 100 - total flux cleaned = 0.000629402 Jy ! Component: 150 - total flux cleaned = 0.000629883 Jy ! Component: 200 - total flux cleaned = 0.000597859 Jy ! Total flux subtracted in 200 components = 0.000597859 Jy ! Clean residual min=-0.003017 max=0.002964 Jy/beam ! Clean residual mean=0.000004 rms=0.000778 Jy/beam ! Combined flux in latest and established models = 0.124341 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 103 components and 0.124341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073182Jy sigma=0.889438 ! Fit after self-cal, rms=0.073172Jy sigma=0.889421 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073172Jy sigma=0.889421 ! Fit after self-cal, rms=0.073478Jy sigma=0.889160 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.034 mas, bmaj=11.55 mas, bpa=-0.1802 degrees ! Estimated noise=1.00609 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000892994 Jy ! Component: 100 - total flux cleaned = 0.00106541 Jy ! Component: 150 - total flux cleaned = 0.00115875 Jy ! Component: 200 - total flux cleaned = 0.00124599 Jy ! Total flux subtracted in 200 components = 0.00124599 Jy ! Clean residual min=-0.002828 max=0.002864 Jy/beam ! Clean residual mean=0.000011 rms=0.000887 Jy/beam ! Combined flux in latest and established models = 0.125587 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 109 components and 0.125587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073465Jy sigma=0.888746 ! Fit after self-cal, rms=0.073459Jy sigma=0.888701 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000110586 Jy ! Component: 100 - total flux cleaned = 0.000165866 Jy ! Component: 150 - total flux cleaned = 0.000245314 Jy ! Component: 200 - total flux cleaned = 0.00031943 Jy ! Total flux subtracted in 200 components = 0.00031943 Jy ! Clean residual min=-0.002778 max=0.002849 Jy/beam ! Clean residual mean=0.000010 rms=0.000867 Jy/beam ! Combined flux in latest and established models = 0.125907 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 117 components and 0.125907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073452Jy sigma=0.888504 ! Fit after self-cal, rms=0.073442Jy sigma=0.888484 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.019 mas, bmaj=5.552 mas, bpa=16 degrees ! Estimated noise=0.896676 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.019 x 5.552 at 16 degrees (North through East) ! Clean map min=-0.0027413 max=0.089856 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7446 mas, bmaj=4.43 mas, bpa=16.91 degrees ! Estimated noise=1.70808 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0730392 Jy ! Component: 100 - total flux cleaned = 0.0904582 Jy ! Component: 150 - total flux cleaned = 0.0990417 Jy ! Component: 200 - total flux cleaned = 0.105191 Jy ! Total flux subtracted in 200 components = 0.105191 Jy ! Clean residual min=-0.005176 max=0.005499 Jy/beam ! Clean residual mean=0.000021 rms=0.001391 Jy/beam ! Combined flux in latest and established models = 0.105191 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.105191 Jy ! Inverting map and beam ! Estimated beam: bmin=1.019 mas, bmaj=5.552 mas, bpa=16 degrees ! Estimated noise=0.896676 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0069629 Jy ! Component: 100 - total flux cleaned = 0.0112866 Jy ! Component: 150 - total flux cleaned = 0.0143359 Jy ! Component: 200 - total flux cleaned = 0.0163837 Jy ! Total flux subtracted in 200 components = 0.0163837 Jy ! Clean residual min=-0.003432 max=0.003277 Jy/beam ! Clean residual mean=0.000022 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 0.121574 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 59 components and 0.121574 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.034 mas, bmaj=11.55 mas, bpa=-0.1802 degrees ! Estimated noise=1.00609 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165417 Jy ! Component: 100 - total flux cleaned = 0.00241072 Jy ! Component: 150 - total flux cleaned = 0.00281749 Jy ! Component: 200 - total flux cleaned = 0.0031143 Jy ! Total flux subtracted in 200 components = 0.0031143 Jy ! Clean residual min=-0.003062 max=0.002848 Jy/beam ! Clean residual mean=0.000019 rms=0.000916 Jy/beam ! Combined flux in latest and established models = 0.124689 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000251653 Jy ! Component: 100 - total flux cleaned = 0.00036085 Jy ! Component: 150 - total flux cleaned = 0.000461726 Jy ! Component: 200 - total flux cleaned = 0.000557476 Jy ! Total flux subtracted in 200 components = 0.000557476 Jy ! Clean residual min=-0.002741 max=0.002721 Jy/beam ! Clean residual mean=0.000016 rms=0.000878 Jy/beam ! Combined flux in latest and established models = 0.125246 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 73 components and 0.125246 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.019 mas, bmaj=5.552 mas, bpa=16 degrees ! Estimated noise=0.896676 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000297687 Jy ! Component: 100 - total flux cleaned = -0.000205587 Jy ! Component: 150 - total flux cleaned = -0.000249288 Jy ! Component: 200 - total flux cleaned = -0.000288692 Jy ! Total flux subtracted in 200 components = -0.000288692 Jy ! Clean residual min=-0.002749 max=0.002871 Jy/beam ! Clean residual mean=0.000010 rms=0.000741 Jy/beam ! Combined flux in latest and established models = 0.124958 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 88 components and 0.124958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073459Jy sigma=0.888993 ! Fit after self-cal, rms=0.073411Jy sigma=0.888792 wmodel J1048-4114_X_map.mod ! Writing 88 model components to file: J1048-4114_X_map.mod wobs J1048-4114_X_uvs.fits ! Writing UV FITS file: J1048-4114_X_uvs.fits wwins J1048-4114_X_map.win ! wwins: Wrote 2 windows to J1048-4114_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000638047 Jy ! Component: 100 - total flux cleaned = 0.00128315 Jy ! Component: 150 - total flux cleaned = 0.00171477 Jy ! Component: 200 - total flux cleaned = 0.00204025 Jy ! Component: 250 - total flux cleaned = 0.00227198 Jy ! Component: 300 - total flux cleaned = 0.00230964 Jy ! Component: 350 - total flux cleaned = 0.00234522 Jy ! Component: 400 - total flux cleaned = 0.00224032 Jy ! Component: 450 - total flux cleaned = 0.00213862 Jy ! Component: 500 - total flux cleaned = 0.00200726 Jy ! Component: 550 - total flux cleaned = 0.0018785 Jy ! Component: 600 - total flux cleaned = 0.00162884 Jy ! Component: 650 - total flux cleaned = 0.00162856 Jy ! Component: 700 - total flux cleaned = 0.00148004 Jy ! Component: 750 - total flux cleaned = 0.00147988 Jy ! Component: 800 - total flux cleaned = 0.00147985 Jy ! Component: 850 - total flux cleaned = 0.00147917 Jy ! Component: 900 - total flux cleaned = 0.0014514 Jy ! Component: 950 - total flux cleaned = 0.00153244 Jy ! Component: 1000 - total flux cleaned = 0.00158569 Jy ! Component: 1050 - total flux cleaned = 0.00171692 Jy ! Component: 1100 - total flux cleaned = 0.00176849 Jy ! Component: 1150 - total flux cleaned = 0.00189569 Jy ! Component: 1200 - total flux cleaned = 0.00202059 Jy ! Component: 1250 - total flux cleaned = 0.00211936 Jy ! Component: 1300 - total flux cleaned = 0.00219241 Jy ! Component: 1350 - total flux cleaned = 0.00226468 Jy ! Component: 1400 - total flux cleaned = 0.00233538 Jy ! Component: 1450 - total flux cleaned = 0.00238183 Jy ! Component: 1500 - total flux cleaned = 0.00242807 Jy ! Component: 1550 - total flux cleaned = 0.002428 Jy ! Component: 1600 - total flux cleaned = 0.00247322 Jy ! Component: 1650 - total flux cleaned = 0.0025397 Jy ! Component: 1700 - total flux cleaned = 0.00249585 Jy ! Component: 1750 - total flux cleaned = 0.0025829 Jy ! Component: 1800 - total flux cleaned = 0.00256137 Jy ! Component: 1850 - total flux cleaned = 0.00258298 Jy ! Component: 1900 - total flux cleaned = 0.00258304 Jy ! Component: 1950 - total flux cleaned = 0.00256217 Jy ! Component: 2000 - total flux cleaned = 0.00260312 Jy ! Component: 2050 - total flux cleaned = 0.00264375 Jy ! Component: 2100 - total flux cleaned = 0.00260337 Jy ! Component: 2150 - total flux cleaned = 0.00262342 Jy ! Component: 2200 - total flux cleaned = 0.00262349 Jy ! Component: 2250 - total flux cleaned = 0.00266282 Jy ! Component: 2300 - total flux cleaned = 0.00264314 Jy ! Component: 2350 - total flux cleaned = 0.00262363 Jy ! Component: 2400 - total flux cleaned = 0.00254681 Jy ! Component: 2450 - total flux cleaned = 0.00252802 Jy ! Component: 2500 - total flux cleaned = 0.00249016 Jy ! Component: 2550 - total flux cleaned = 0.00250891 Jy ! Component: 2600 - total flux cleaned = 0.00245307 Jy ! Component: 2650 - total flux cleaned = 0.00247136 Jy ! Component: 2700 - total flux cleaned = 0.0024162 Jy ! Component: 2750 - total flux cleaned = 0.00234334 Jy ! Component: 2800 - total flux cleaned = 0.00232523 Jy ! Component: 2850 - total flux cleaned = 0.00234315 Jy ! Component: 2900 - total flux cleaned = 0.00227173 Jy ! Component: 2950 - total flux cleaned = 0.00227173 Jy ! Component: 3000 - total flux cleaned = 0.002254 Jy ! Component: 3050 - total flux cleaned = 0.002254 Jy ! Component: 3100 - total flux cleaned = 0.00223691 Jy ! Component: 3150 - total flux cleaned = 0.00223687 Jy ! Component: 3200 - total flux cleaned = 0.00218526 Jy ! Component: 3250 - total flux cleaned = 0.00223633 Jy ! Component: 3300 - total flux cleaned = 0.00215132 Jy ! Component: 3350 - total flux cleaned = 0.00218525 Jy ! Component: 3400 - total flux cleaned = 0.002202 Jy ! Component: 3450 - total flux cleaned = 0.00220201 Jy ! Component: 3500 - total flux cleaned = 0.00218535 Jy ! Component: 3550 - total flux cleaned = 0.00223478 Jy ! Component: 3600 - total flux cleaned = 0.00221841 Jy ! Component: 3650 - total flux cleaned = 0.00220199 Jy ! Component: 3700 - total flux cleaned = 0.00226685 Jy ! Component: 3750 - total flux cleaned = 0.00218583 Jy ! Component: 3800 - total flux cleaned = 0.00223407 Jy ! Component: 3850 - total flux cleaned = 0.00221805 Jy ! Component: 3900 - total flux cleaned = 0.00220215 Jy ! Component: 3950 - total flux cleaned = 0.00220215 Jy ! Component: 4000 - total flux cleaned = 0.00217044 Jy ! Component: 4050 - total flux cleaned = 0.00218623 Jy ! Total flux subtracted in 4096 components = 0.00221762 Jy ! Clean residual min=-0.000954 max=0.000915 Jy/beam ! Clean residual mean=0.000002 rms=0.000279 Jy/beam ! Combined flux in latest and established models = 0.127175 Jy keep ! Adding 228 model components to the UV plane model. ! The established model now contains 316 components and 0.127175 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv118_uvs/J1048-4114_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.019 x 5.552 at 16 degrees (North through East) ! Clean map min=-0.002138 max=0.093316 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv118_uvs/J1048-4114_X_map.fits wmodel /scr/pima/rv118_uvs/J1048-4114_X_map.mod ! Writing 316 model components to file: /scr/pima/rv118_uvs/J1048-4114_X_map.mod wobs /scr/pima/rv118_uvs/J1048-4114_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv118_uvs/J1048-4114_X_uvs.fits wwins /scr/pima/rv118_uvs/J1048-4114_X_map.win ! wwins: Wrote 3 windows to /scr/pima/rv118_uvs/J1048-4114_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0933157 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000272393 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.875716 0.875716 1.75143 3.50286 7.00572 14.0114 28.0229 56.0458 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.093 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 342.576 quit ! Quitting program ! Log file /scr/pima/rv118_uvs/J1048-4114_X_dfm.log closed on Sun Dec 10 00:09:08 2017