! Started logfile: /scr/pima/rv118_uvs/J1015+1227_S_dfm.log on Sun Dec 10 00:09:21 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.23275
obs     /scr/pima/rv118_uvs/J1015+1227_S_uva.fits
! Reading UV FITS file: /scr/pima/rv118_uvs/J1015+1227_S_uva.fits
! AN table 1: 62 integrations on 36 of 36 possible baselines.
! AN table 2: 22 integrations on 1 of 1 possible baselines.
! Apparent sampling: 0.392635 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1015+1227
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23275e+09        8e+06          1        8e+06
!  02        2  2.26275e+09        8e+06          1        8e+06
!  03        3  2.35275e+09        8e+06          1        8e+06
!  04        4  2.37275e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 3540 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1015+1227_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 282 telescope corrections were flagged in sub-array 1.
!  A total of 44 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 282 telescope corrections were flagged in sub-array 1.
!  A total of 44 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 282 telescope corrections were flagged in sub-array 1.
!  A total of 44 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 282 telescope corrections were flagged in sub-array 1.
!  A total of 44 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.018521Jy  sigma=19.006813
! Fit after  self-cal, rms=0.826769Jy  sigma=15.844769
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.963 mas, bmaj=8.349 mas, bpa=18.36 degrees
! Estimated noise=0.936414 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.133865 Jy
! Component: 100  -  total flux cleaned = 0.163057 Jy
! Total flux subtracted in 100 components = 0.163057 Jy
! Clean residual min=-0.008177 max=0.011225 Jy/beam
! Clean residual mean=0.000033 rms=0.002417 Jy/beam
! Combined flux in latest and established models = 0.163057 Jy
! Performing phase self-cal
! Adding 2 model components to the UV plane model.
! The established model now contains 2 components and 0.163057 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099738Jy  sigma=1.281693
! Fit after  self-cal, rms=0.099730Jy  sigma=1.281639
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.799 mas, bmaj=9.671 mas, bpa=17.07 degrees
! Estimated noise=0.681072 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00897729 Jy
! Component: 100  -  total flux cleaned = 0.0133994 Jy
! Component: 150  -  total flux cleaned = 0.016007 Jy
! Component: 200  -  total flux cleaned = 0.0164552 Jy
! Total flux subtracted in 200 components = 0.0164552 Jy
! Clean residual min=-0.006619 max=0.007249 Jy/beam
! Clean residual mean=0.000070 rms=0.001688 Jy/beam
! Combined flux in latest and established models = 0.179513 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 14 components and 0.179513 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098260Jy  sigma=1.271362
! Fit after  self-cal, rms=0.098258Jy  sigma=1.271169
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.799 x 9.671 at 17.07 degrees (North through East)
! Clean map  min=-0.0064857  max=0.17103 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 36 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.05     HN        1.00     KP        1.04     
!   LA        1.03     NL        1.09     OV        1.03     PT        0.98     
!   SC        1.16     
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    WZ        0.00*    
! 
! 
! Correcting IF 2.
!  A total of 36 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.06     HN        1.04     KP        1.03     
!   LA        1.03     NL        1.11     OV        1.01     PT        1.00     
!   SC        1.18     
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    WZ        0.00*    
! 
! 
! Correcting IF 3.
!  A total of 36 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.11     HN        1.04     KP        0.51     
!   LA        1.06     NL        0.65     OV        0.99     PT        1.03     
!   SC        0.61     
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    WZ        0.00*    
! 
! 
! Correcting IF 4.
!  A total of 36 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.05     HN        1.06     KP        1.04     
!   LA        1.03     NL        1.11     OV        1.03     PT        1.03     
!   SC        1.18     
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    WZ        0.00*    
! 
! 
! Fit before self-cal, rms=0.098258Jy  sigma=1.271169
! Fit after  self-cal, rms=0.056460Jy  sigma=1.024456
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.697 mas, bmaj=10.39 mas, bpa=17.23 degrees
! Estimated noise=0.679933 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00141797 Jy
! Component: 100  -  total flux cleaned = -0.0014635 Jy
! Component: 150  -  total flux cleaned = -0.00142035 Jy
! Component: 200  -  total flux cleaned = -0.00134227 Jy
! Total flux subtracted in 200 components = -0.00134227 Jy
! Clean residual min=-0.003435 max=0.003362 Jy/beam
! Clean residual mean=0.000001 rms=0.000870 Jy/beam
! Combined flux in latest and established models = 0.17817 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 21 components and 0.17817 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056362Jy  sigma=1.023303
! Fit after  self-cal, rms=0.056491Jy  sigma=1.020310
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056491Jy  sigma=1.020310
! Fit after  self-cal, rms=0.057840Jy  sigma=0.999557
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.686 mas, bmaj=10.4 mas, bpa=17.18 degrees
! Estimated noise=0.679958 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000685004 Jy
! Component: 100  -  total flux cleaned = 0.000619679 Jy
! Component: 150  -  total flux cleaned = 0.000536831 Jy
! Component: 200  -  total flux cleaned = 0.000511301 Jy
! Total flux subtracted in 200 components = 0.000511301 Jy
! Clean residual min=-0.002201 max=0.002521 Jy/beam
! Clean residual mean=0.000003 rms=0.000592 Jy/beam
! Combined flux in latest and established models = 0.178682 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 30 components and 0.178682 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057802Jy  sigma=0.998919
! Fit after  self-cal, rms=0.057867Jy  sigma=0.998711
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.54509e-06 Jy
! Component: 100  -  total flux cleaned = -1.42323e-05 Jy
! Component: 150  -  total flux cleaned = -3.11331e-05 Jy
! Component: 200  -  total flux cleaned = -1.48443e-05 Jy
! Total flux subtracted in 200 components = -1.48443e-05 Jy
! Clean residual min=-0.002138 max=0.002487 Jy/beam
! Clean residual mean=0.000003 rms=0.000589 Jy/beam
! Combined flux in latest and established models = 0.178667 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 33 components and 0.178667 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057857Jy  sigma=0.998505
! Fit after  self-cal, rms=0.057855Jy  sigma=0.998496
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057855Jy  sigma=0.998496
! Fit after  self-cal, rms=0.057836Jy  sigma=0.998257
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.67 mas, bmaj=10.39 mas, bpa=17.16 degrees
! Estimated noise=0.679834 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00021242 Jy
! Component: 100  -  total flux cleaned = 0.000193088 Jy
! Component: 150  -  total flux cleaned = 0.000210936 Jy
! Component: 200  -  total flux cleaned = 0.000210268 Jy
! Total flux subtracted in 200 components = 0.000210268 Jy
! Clean residual min=-0.002078 max=0.002414 Jy/beam
! Clean residual mean=0.000004 rms=0.000579 Jy/beam
! Combined flux in latest and established models = 0.178877 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 37 components and 0.178877 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057822Jy  sigma=0.997962
! Fit after  self-cal, rms=0.057820Jy  sigma=0.997951
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.95914e-05 Jy
! Component: 100  -  total flux cleaned = -5.81886e-06 Jy
! Component: 150  -  total flux cleaned = -1.80867e-05 Jy
! Component: 200  -  total flux cleaned = -6.2359e-06 Jy
! Total flux subtracted in 200 components = -6.2359e-06 Jy
! Clean residual min=-0.002073 max=0.002396 Jy/beam
! Clean residual mean=0.000004 rms=0.000577 Jy/beam
! Combined flux in latest and established models = 0.178871 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 40 components and 0.178871 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057816Jy  sigma=0.997826
! Fit after  self-cal, rms=0.057814Jy  sigma=0.997819
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057814Jy  sigma=0.997819
! Fit after  self-cal, rms=0.057758Jy  sigma=0.997706
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.946 mas, bmaj=13.19 mas, bpa=24.39 degrees
! Estimated noise=0.764145 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000115394 Jy
! Component: 100  -  total flux cleaned = 0.000155623 Jy
! Component: 150  -  total flux cleaned = 0.000187234 Jy
! Component: 200  -  total flux cleaned = 0.00021599 Jy
! Total flux subtracted in 200 components = 0.00021599 Jy
! Clean residual min=-0.002155 max=0.002404 Jy/beam
! Clean residual mean=0.000007 rms=0.000596 Jy/beam
! Combined flux in latest and established models = 0.179087 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 46 components and 0.179087 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057754Jy  sigma=0.997646
! Fit after  self-cal, rms=0.057749Jy  sigma=0.997618
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.53869e-05 Jy
! Component: 100  -  total flux cleaned = 6.48115e-05 Jy
! Component: 150  -  total flux cleaned = 6.47966e-05 Jy
! Component: 200  -  total flux cleaned = 7.25306e-05 Jy
! Total flux subtracted in 200 components = 7.25306e-05 Jy
! Clean residual min=-0.002132 max=0.002389 Jy/beam
! Clean residual mean=0.000007 rms=0.000594 Jy/beam
! Combined flux in latest and established models = 0.179159 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 49 components and 0.179159 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057748Jy  sigma=0.997607
! Fit after  self-cal, rms=0.057745Jy  sigma=0.997597
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.66 mas, bmaj=10.38 mas, bpa=17.15 degrees
! Estimated noise=0.679805 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.66 x 10.38 at 17.15 degrees (North through East)
! Clean map  min=-0.0019414  max=0.16956 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.825 mas, bmaj=9.142 mas, bpa=18.66 degrees
! Estimated noise=0.92647 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.132394 Jy
! Component: 100  -  total flux cleaned = 0.161322 Jy
! Component: 150  -  total flux cleaned = 0.168653 Jy
! Component: 200  -  total flux cleaned = 0.172216 Jy
! Total flux subtracted in 200 components = 0.172216 Jy
! Clean residual min=-0.003593 max=0.003471 Jy/beam
! Clean residual mean=-0.000006 rms=0.000934 Jy/beam
! Combined flux in latest and established models = 0.172216 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.172216 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.66 mas, bmaj=10.38 mas, bpa=17.15 degrees
! Estimated noise=0.679805 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3, 8.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00317851 Jy
! Component: 100  -  total flux cleaned = 0.00509213 Jy
! Component: 150  -  total flux cleaned = 0.00644947 Jy
! Component: 200  -  total flux cleaned = 0.00692322 Jy
! Total flux subtracted in 200 components = 0.00692322 Jy
! Clean residual min=-0.001975 max=0.002180 Jy/beam
! Clean residual mean=0.000006 rms=0.000570 Jy/beam
! Combined flux in latest and established models = 0.179139 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 39 components and 0.179139 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.946 mas, bmaj=13.19 mas, bpa=24.39 degrees
! Estimated noise=0.764145 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000495876 Jy
! Component: 100  -  total flux cleaned = 0.000575702 Jy
! Component: 150  -  total flux cleaned = 0.000687908 Jy
! Component: 200  -  total flux cleaned = 0.000764102 Jy
! Total flux subtracted in 200 components = 0.000764102 Jy
! Clean residual min=-0.002024 max=0.002170 Jy/beam
! Clean residual mean=0.000008 rms=0.000578 Jy/beam
! Combined flux in latest and established models = 0.179903 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.22311e-05 Jy
! Component: 100  -  total flux cleaned = 9.62163e-05 Jy
! Component: 150  -  total flux cleaned = 0.000109492 Jy
! Component: 200  -  total flux cleaned = 0.000134616 Jy
! Total flux subtracted in 200 components = 0.000134616 Jy
! Clean residual min=-0.002010 max=0.002155 Jy/beam
! Clean residual mean=0.000007 rms=0.000576 Jy/beam
! Combined flux in latest and established models = 0.180038 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 62 components and 0.180038 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.66 mas, bmaj=10.38 mas, bpa=17.15 degrees
! Estimated noise=0.679805 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000331832 Jy
! Component: 100  -  total flux cleaned = -0.000364399 Jy
! Component: 150  -  total flux cleaned = -0.000335803 Jy
! Component: 200  -  total flux cleaned = -0.000309645 Jy
! Total flux subtracted in 200 components = -0.000309645 Jy
! Clean residual min=-0.001932 max=0.002109 Jy/beam
! Clean residual mean=0.000005 rms=0.000553 Jy/beam
! Combined flux in latest and established models = 0.179728 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 82 components and 0.179728 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057700Jy  sigma=0.996843
! Fit after  self-cal, rms=0.057696Jy  sigma=0.996762
wmodel J1015+1227_S_map.mod
! Writing 82 model components to file: J1015+1227_S_map.mod
wobs   J1015+1227_S_uvs.fits
! Writing UV FITS file: J1015+1227_S_uvs.fits
wwins  J1015+1227_S_map.win
! wwins: Wrote 2 windows to J1015+1227_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000471575 Jy
! Component: 100  -  total flux cleaned = 0.000575498 Jy
! Component: 150  -  total flux cleaned = 0.000574921 Jy
! Component: 200  -  total flux cleaned = 0.000607283 Jy
! Component: 250  -  total flux cleaned = 0.000547051 Jy
! Component: 300  -  total flux cleaned = 0.000517611 Jy
! Component: 350  -  total flux cleaned = 0.000402488 Jy
! Component: 400  -  total flux cleaned = 0.000431193 Jy
! Component: 450  -  total flux cleaned = 0.000458742 Jy
! Component: 500  -  total flux cleaned = 0.000431026 Jy
! Component: 550  -  total flux cleaned = 0.00032574 Jy
! Component: 600  -  total flux cleaned = 0.000299891 Jy
! Component: 650  -  total flux cleaned = 0.000249947 Jy
! Component: 700  -  total flux cleaned = 0.000299112 Jy
! Component: 750  -  total flux cleaned = 0.000274903 Jy
! Component: 800  -  total flux cleaned = 0.000322368 Jy
! Component: 850  -  total flux cleaned = 0.000228657 Jy
! Component: 900  -  total flux cleaned = 0.000205372 Jy
! Component: 950  -  total flux cleaned = 0.000159825 Jy
! Component: 1000  -  total flux cleaned = 7.08465e-05 Jy
! Component: 1050  -  total flux cleaned = 5.37393e-06 Jy
! Component: 1100  -  total flux cleaned = -5.88013e-05 Jy
! Component: 1150  -  total flux cleaned = -0.000143414 Jy
! Component: 1200  -  total flux cleaned = -0.000205899 Jy
! Component: 1250  -  total flux cleaned = -0.000225959 Jy
! Component: 1300  -  total flux cleaned = -0.000245959 Jy
! Component: 1350  -  total flux cleaned = -0.000285363 Jy
! Component: 1400  -  total flux cleaned = -0.000324917 Jy
! Component: 1450  -  total flux cleaned = -0.000305719 Jy
! Component: 1500  -  total flux cleaned = -0.000362809 Jy
! Component: 1550  -  total flux cleaned = -0.000325156 Jy
! Component: 1600  -  total flux cleaned = -0.000343405 Jy
! Component: 1650  -  total flux cleaned = -0.000324995 Jy
! Component: 1700  -  total flux cleaned = -0.000306836 Jy
! Component: 1750  -  total flux cleaned = -0.000235455 Jy
! Component: 1800  -  total flux cleaned = -0.000270435 Jy
! Component: 1850  -  total flux cleaned = -0.000235763 Jy
! Component: 1900  -  total flux cleaned = -0.000218492 Jy
! Component: 1950  -  total flux cleaned = -0.000218424 Jy
! Component: 2000  -  total flux cleaned = -0.000218277 Jy
! Component: 2050  -  total flux cleaned = -0.000168461 Jy
! Component: 2100  -  total flux cleaned = -0.000151982 Jy
! Component: 2150  -  total flux cleaned = -0.000135536 Jy
! Component: 2200  -  total flux cleaned = -7.14579e-05 Jy
! Component: 2250  -  total flux cleaned = -8.71742e-05 Jy
! Component: 2300  -  total flux cleaned = 7.02976e-06 Jy
! Component: 2350  -  total flux cleaned = -8.35902e-06 Jy
! Component: 2400  -  total flux cleaned = 6.84303e-05 Jy
! Component: 2450  -  total flux cleaned = 0.000113964 Jy
! Component: 2500  -  total flux cleaned = 0.000189209 Jy
! Component: 2550  -  total flux cleaned = 0.000218849 Jy
! Component: 2600  -  total flux cleaned = 0.000248278 Jy
! Component: 2650  -  total flux cleaned = 0.000292315 Jy
! Component: 2700  -  total flux cleaned = 0.000393811 Jy
! Component: 2750  -  total flux cleaned = 0.000393586 Jy
! Component: 2800  -  total flux cleaned = 0.000436572 Jy
! Component: 2850  -  total flux cleaned = 0.000521437 Jy
! Component: 2900  -  total flux cleaned = 0.000563501 Jy
! Component: 2950  -  total flux cleaned = 0.000619179 Jy
! Component: 3000  -  total flux cleaned = 0.000715723 Jy
! Component: 3050  -  total flux cleaned = 0.000756606 Jy
! Component: 3100  -  total flux cleaned = 0.000810898 Jy
! Component: 3150  -  total flux cleaned = 0.000838004 Jy
! Component: 3200  -  total flux cleaned = 0.000878052 Jy
! Component: 3250  -  total flux cleaned = 0.000917681 Jy
! Component: 3300  -  total flux cleaned = 0.000956976 Jy
! Component: 3350  -  total flux cleaned = 0.00100877 Jy
! Component: 3400  -  total flux cleaned = 0.000982957 Jy
! Component: 3450  -  total flux cleaned = 0.00103415 Jy
! Component: 3500  -  total flux cleaned = 0.00100876 Jy
! Component: 3550  -  total flux cleaned = 0.00102138 Jy
! Component: 3600  -  total flux cleaned = 0.00108387 Jy
! Component: 3650  -  total flux cleaned = 0.00110868 Jy
! Component: 3700  -  total flux cleaned = 0.00109617 Jy
! Component: 3750  -  total flux cleaned = 0.00113303 Jy
! Component: 3800  -  total flux cleaned = 0.00115736 Jy
! Component: 3850  -  total flux cleaned = 0.00122987 Jy
! Component: 3900  -  total flux cleaned = 0.00125379 Jy
! Component: 3950  -  total flux cleaned = 0.00127764 Jy
! Component: 4000  -  total flux cleaned = 0.00126591 Jy
! Component: 4050  -  total flux cleaned = 0.00128935 Jy
! Total flux subtracted in 4096 components = 0.00132446 Jy
! Clean residual min=-0.000782 max=0.000767 Jy/beam
! Clean residual mean=0.000001 rms=0.000227 Jy/beam
! Combined flux in latest and established models = 0.181052 Jy
keep
! Adding 302 model components to the UV plane model.
! The established model now contains 384 components and 0.181053 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv118_uvs/J1015+1227_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.66 x 10.38 at 17.15 degrees (North through East)
! Clean map  min=-0.0015507  max=0.16935 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv118_uvs/J1015+1227_S_map.fits
wmodel /scr/pima/rv118_uvs/J1015+1227_S_map.mod
! Writing 384 model components to file: /scr/pima/rv118_uvs/J1015+1227_S_map.mod
wobs   /scr/pima/rv118_uvs/J1015+1227_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv118_uvs/J1015+1227_S_uvs.fits
wwins  /scr/pima/rv118_uvs/J1015+1227_S_map.win
! wwins: Wrote 3 windows to /scr/pima/rv118_uvs/J1015+1227_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.169346 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000223425 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.395802 0.395802 0.791603 1.58321 3.16641 6.33283 12.6657 25.3313 50.6626
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.169 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  757.955 
quit
! Quitting program
! Log file /scr/pima/rv118_uvs/J1015+1227_S_dfm.log closed on Sun Dec 10 00:09:25 2017