! Started logfile: /scr/pima/rv118_uvs/J0958+6533_X_dfm.log on Sun Dec 10 00:08:50 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.36575
obs     /scr/pima/rv118_uvs/J0958+6533_X_uva.fits
! Reading UV FITS file: /scr/pima/rv118_uvs/J0958+6533_X_uva.fits
! AN table 1: 2 integrations on 36 of 36 possible baselines.
! AN table 2: 29 integrations on 78 of 78 possible baselines.
! Apparent sampling: 0.773779 visibilities/baseline/integration-bin.
! Found source: J0958+6533
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.36575e+09        8e+06          1        8e+06
!  02        2  8.44575e+09        8e+06          1        8e+06
!  03        3  8.80575e+09        8e+06          1        8e+06
!  04        4  8.92575e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 7224 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0958+6533_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 77 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 77 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 77 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 77 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.262688Jy  sigma=18.829395
! Fit after  self-cal, rms=0.369361Jy  sigma=5.053445
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.388% of the data.
!  The x-axis pixel size should ideally be below 0.1713 milli-arcsec
! Estimated beam: bmin=0.5147 mas, bmaj=0.8887 mas, bpa=-4.725 degrees
! Estimated noise=0.956452 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.534507 Jy
! Component: 100  -  total flux cleaned = 0.709211 Jy
! Total flux subtracted in 100 components = 0.709211 Jy
! Clean residual min=-0.018977 max=0.076200 Jy/beam
! Clean residual mean=0.000056 rms=0.003559 Jy/beam
! Combined flux in latest and established models = 0.709211 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.709211 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.163355Jy  sigma=2.342336
! Fit after  self-cal, rms=0.162370Jy  sigma=2.328957
! Inverting map 
! Your choice of large map pixels excluded 0.388% of the data.
!  The x-axis pixel size should ideally be below 0.1713 milli-arcsec
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0853288 Jy
! Component: 100  -  total flux cleaned = 0.127954 Jy
! Total flux subtracted in 100 components = 0.127954 Jy
! Clean residual min=-0.011335 max=0.020589 Jy/beam
! Clean residual mean=0.000030 rms=0.001837 Jy/beam
! Combined flux in latest and established models = 0.837165 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 10 components and 0.837165 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101025Jy  sigma=1.333845
! Fit after  self-cal, rms=0.099807Jy  sigma=1.318981
! Inverting map 
! Your choice of large map pixels excluded 0.388% of the data.
!  The x-axis pixel size should ideally be below 0.1713 milli-arcsec
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0268404 Jy
! Component: 100  -  total flux cleaned = 0.0408952 Jy
! Total flux subtracted in 100 components = 0.0408952 Jy
! Clean residual min=-0.010329 max=0.013061 Jy/beam
! Clean residual mean=0.000021 rms=0.001464 Jy/beam
! Combined flux in latest and established models = 0.87806 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 13 components and 0.87806 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088469Jy  sigma=1.122742
! Fit after  self-cal, rms=0.088272Jy  sigma=1.119669
! Inverting map 
! Your choice of large map pixels excluded 0.388% of the data.
!  The x-axis pixel size should ideally be below 0.1713 milli-arcsec
! Added new window around map position (-0.6, 0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0110632 Jy
! Component: 100  -  total flux cleaned = 0.0140665 Jy
! Total flux subtracted in 100 components = 0.0140665 Jy
! Clean residual min=-0.009628 max=0.009737 Jy/beam
! Clean residual mean=0.000019 rms=0.001357 Jy/beam
! Combined flux in latest and established models = 0.892126 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 19 components and 0.892126 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084667Jy  sigma=1.061650
! Fit after  self-cal, rms=0.084498Jy  sigma=1.059364
! Inverting map 
! Your choice of large map pixels excluded 0.388% of the data.
!  The x-axis pixel size should ideally be below 0.1713 milli-arcsec
! Added new window around map position (-0.4, 2.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00588604 Jy
! Component: 100  -  total flux cleaned = 0.00873504 Jy
! Total flux subtracted in 100 components = 0.00873504 Jy
! Clean residual min=-0.008702 max=0.008412 Jy/beam
! Clean residual mean=0.000017 rms=0.001280 Jy/beam
! Combined flux in latest and established models = 0.900861 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 22 components and 0.900862 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082702Jy  sigma=1.029358
! Fit after  self-cal, rms=0.082626Jy  sigma=1.028308
! Inverting map 
! Your choice of large map pixels excluded 0.388% of the data.
!  The x-axis pixel size should ideally be below 0.1713 milli-arcsec
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.388% of the data.
!  The x-axis pixel size should ideally be below 0.1713 milli-arcsec
! Estimated beam: bmin=0.5962 mas, bmaj=1.024 mas, bpa=-1.346 degrees
! Estimated noise=0.603523 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0140517 Jy
! Component: 100  -  total flux cleaned = 0.0220901 Jy
! Component: 150  -  total flux cleaned = 0.024986 Jy
! Component: 200  -  total flux cleaned = 0.02692 Jy
! Total flux subtracted in 200 components = 0.02692 Jy
! Clean residual min=-0.006718 max=0.007762 Jy/beam
! Clean residual mean=0.000015 rms=0.001393 Jy/beam
! Combined flux in latest and established models = 0.927781 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 28 components and 0.927781 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079806Jy  sigma=0.982364
! Fit after  self-cal, rms=0.079598Jy  sigma=0.978525
! Inverting map 
! Your choice of large map pixels excluded 0.388% of the data.
!  The x-axis pixel size should ideally be below 0.1713 milli-arcsec
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.5962 x 1.024 at -1.346 degrees (North through East)
! Clean map  min=-0.0059269  max=0.69602 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.98     KP        0.99     LA        1.02     
!   MK        1.00     NL        1.00     NY        1.01     OV        1.02     
!   PT        0.99     
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     FD        0.98     HN        1.02     KK        1.08     
!   KP        1.01     LA        0.98     NL        0.99     NY        1.01     
!   ON        1.01     OV        1.02     PT        0.99     SC        1.00     
!   WZ        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     KP        1.00     LA        0.98     
!   MK        1.04     NL        0.99     NY        1.03     OV        1.02     
!   PT        0.99     
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        0.98     HN        1.01     KK        1.04     
!   KP        1.01     LA        0.97     NL        0.99     NY        1.02     
!   ON        1.03     OV        1.03     PT        0.99     SC        0.98     
!   WZ        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.98     KP        0.98     LA        1.00     
!   MK        1.01     NL        0.99     NY        1.01     OV        1.03     
!   PT        0.98     
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        0.98     HN        1.00     KK        1.06     
!   KP        1.00     LA        0.97     NL        0.97     NY        1.01     
!   ON        1.02     OV        1.02     PT        0.99     SC        0.95     
!   WZ        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.99     KP        0.99     LA        1.01     
!   MK        1.02     NL        0.97     NY        1.06     OV        1.03     
!   PT        0.98     
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.99     FD        0.98     HN        1.00     KK        1.07     
!   KP        0.99     LA        0.97     NL        0.96     NY        1.02     
!   ON        1.02     OV        1.02     PT        0.98     SC        0.94     
!   WZ        0.98     
! 
! 
! Fit before self-cal, rms=0.079598Jy  sigma=0.978525
! Fit after  self-cal, rms=0.077197Jy  sigma=0.922902
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.362% of the data.
!  The x-axis pixel size should ideally be below 0.1713 milli-arcsec
! Estimated beam: bmin=0.5968 mas, bmaj=1.03 mas, bpa=-1.819 degrees
! Estimated noise=0.604233 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00409816 Jy
! Component: 100  -  total flux cleaned = -0.00439117 Jy
! Component: 150  -  total flux cleaned = -0.00438858 Jy
! Component: 200  -  total flux cleaned = -0.00449877 Jy
! Total flux subtracted in 200 components = -0.00449877 Jy
! Clean residual min=-0.004400 max=0.005654 Jy/beam
! Clean residual mean=0.000010 rms=0.000900 Jy/beam
! Combined flux in latest and established models = 0.923283 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 35 components and 0.923283 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076293Jy  sigma=0.912224
! Fit after  self-cal, rms=0.076182Jy  sigma=0.910822
! Inverting map 
! Your choice of large map pixels excluded 0.362% of the data.
!  The x-axis pixel size should ideally be below 0.1713 milli-arcsec
! Added new window around map position (-1.4, 0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00435331 Jy
! Component: 100  -  total flux cleaned = 0.00608541 Jy
! Component: 150  -  total flux cleaned = 0.00634491 Jy
! Component: 200  -  total flux cleaned = 0.0061297 Jy
! Total flux subtracted in 200 components = 0.0061297 Jy
! Clean residual min=-0.003600 max=0.003870 Jy/beam
! Clean residual mean=0.000008 rms=0.000802 Jy/beam
! Combined flux in latest and established models = 0.929412 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 50 components and 0.929412 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075468Jy  sigma=0.901296
! Fit after  self-cal, rms=0.075394Jy  sigma=0.900188
! Inverting map 
! Your choice of large map pixels excluded 0.362% of the data.
!  The x-axis pixel size should ideally be below 0.1713 milli-arcsec
! Added new window around map position (-4.8, 1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00306205 Jy
! Component: 100  -  total flux cleaned = 0.00452498 Jy
! Component: 150  -  total flux cleaned = 0.00514161 Jy
! Component: 200  -  total flux cleaned = 0.00523354 Jy
! Total flux subtracted in 200 components = 0.00523354 Jy
! Clean residual min=-0.003198 max=0.003567 Jy/beam
! Clean residual mean=0.000006 rms=0.000743 Jy/beam
! Combined flux in latest and established models = 0.934646 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 66 components and 0.934646 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074953Jy  sigma=0.895169
! Fit after  self-cal, rms=0.074902Jy  sigma=0.894449
! Inverting map 
! Your choice of large map pixels excluded 0.362% of the data.
!  The x-axis pixel size should ideally be below 0.1713 milli-arcsec
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074902Jy  sigma=0.894449
! Fit after  self-cal, rms=0.074042Jy  sigma=0.873892
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.362% of the data.
!  The x-axis pixel size should ideally be below 0.1713 milli-arcsec
! Estimated beam: bmin=0.597 mas, bmaj=1.031 mas, bpa=-1.848 degrees
! Estimated noise=0.604458 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0010481 Jy
! Component: 100  -  total flux cleaned = 0.00160548 Jy
! Component: 150  -  total flux cleaned = 0.00192951 Jy
! Component: 200  -  total flux cleaned = 0.00200734 Jy
! Total flux subtracted in 200 components = 0.00200734 Jy
! Clean residual min=-0.002807 max=0.003281 Jy/beam
! Clean residual mean=0.000004 rms=0.000629 Jy/beam
! Combined flux in latest and established models = 0.936653 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 73 components and 0.936653 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073778Jy  sigma=0.871178
! Fit after  self-cal, rms=0.073750Jy  sigma=0.870867
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.362% of the data.
!  The x-axis pixel size should ideally be below 0.1713 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.2, 3.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00331008 Jy
! Component: 100  -  total flux cleaned = 0.00368559 Jy
! Component: 150  -  total flux cleaned = 0.00376475 Jy
! Component: 200  -  total flux cleaned = 0.00376464 Jy
! Total flux subtracted in 200 components = 0.00376464 Jy
! Clean residual min=-0.002639 max=0.002930 Jy/beam
! Clean residual mean=0.000003 rms=0.000582 Jy/beam
! Combined flux in latest and established models = 0.940418 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 86 components and 0.940418 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073453Jy  sigma=0.867416
! Fit after  self-cal, rms=0.073428Jy  sigma=0.867243
! Inverting map 
! Your choice of large map pixels excluded 0.362% of the data.
!  The x-axis pixel size should ideally be below 0.1713 milli-arcsec
! Added new window around map position (-9.2, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00221221 Jy
! Component: 100  -  total flux cleaned = 0.00322646 Jy
! Component: 150  -  total flux cleaned = 0.00348583 Jy
! Component: 200  -  total flux cleaned = 0.00354473 Jy
! Total flux subtracted in 200 components = 0.00354473 Jy
! Clean residual min=-0.002471 max=0.002631 Jy/beam
! Clean residual mean=0.000003 rms=0.000560 Jy/beam
! Combined flux in latest and established models = 0.943963 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 97 components and 0.943963 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073230Jy  sigma=0.865253
! Fit after  self-cal, rms=0.073203Jy  sigma=0.865069
! Inverting map 
! Your choice of large map pixels excluded 0.362% of the data.
!  The x-axis pixel size should ideally be below 0.1713 milli-arcsec
! Added new window around map position (39.4, 18.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00140397 Jy
! Component: 100  -  total flux cleaned = 0.00202936 Jy
! Component: 150  -  total flux cleaned = 0.00214362 Jy
! Component: 200  -  total flux cleaned = 0.00225175 Jy
! Total flux subtracted in 200 components = 0.00225175 Jy
! Clean residual min=-0.002395 max=0.002485 Jy/beam
! Clean residual mean=0.000003 rms=0.000549 Jy/beam
! Combined flux in latest and established models = 0.946215 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 103 components and 0.946215 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073042Jy  sigma=0.863580
! Fit after  self-cal, rms=0.073015Jy  sigma=0.863404
! Inverting map 
! Your choice of large map pixels excluded 0.362% of the data.
!  The x-axis pixel size should ideally be below 0.1713 milli-arcsec
! Added new window around map position (-36.8, 16.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00135513 Jy
! Component: 100  -  total flux cleaned = 0.00190567 Jy
! Component: 150  -  total flux cleaned = 0.00243966 Jy
! Component: 200  -  total flux cleaned = 0.00263854 Jy
! Total flux subtracted in 200 components = 0.00263854 Jy
! Clean residual min=-0.002325 max=0.002416 Jy/beam
! Clean residual mean=0.000002 rms=0.000538 Jy/beam
! Combined flux in latest and established models = 0.948853 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 108 components and 0.948853 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072877Jy  sigma=0.862013
! Fit after  self-cal, rms=0.072861Jy  sigma=0.861917
! Inverting map 
! Your choice of large map pixels excluded 0.362% of the data.
!  The x-axis pixel size should ideally be below 0.1713 milli-arcsec
! Added new window around map position (31.8, -28.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00152712 Jy
! Component: 100  -  total flux cleaned = 0.00175613 Jy
! Component: 150  -  total flux cleaned = 0.00170654 Jy
! Component: 200  -  total flux cleaned = 0.00165801 Jy
! Total flux subtracted in 200 components = 0.00165801 Jy
! Clean residual min=-0.002247 max=0.002329 Jy/beam
! Clean residual mean=0.000002 rms=0.000527 Jy/beam
! Combined flux in latest and established models = 0.950511 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 118 components and 0.950511 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072749Jy  sigma=0.860483
! Fit after  self-cal, rms=0.072729Jy  sigma=0.860391
! Inverting map 
! Your choice of large map pixels excluded 0.362% of the data.
!  The x-axis pixel size should ideally be below 0.1713 milli-arcsec
! Added new window around map position (22, -18.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000696297 Jy
! Component: 100  -  total flux cleaned = 0.000576248 Jy
! Component: 150  -  total flux cleaned = 0.000778955 Jy
! Component: 200  -  total flux cleaned = 0.000733315 Jy
! Total flux subtracted in 200 components = 0.000733315 Jy
! Clean residual min=-0.002260 max=0.002275 Jy/beam
! Clean residual mean=0.000002 rms=0.000519 Jy/beam
! Combined flux in latest and established models = 0.951245 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 135 components and 0.951245 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072609Jy  sigma=0.859189
! Fit after  self-cal, rms=0.072597Jy  sigma=0.859110
! Inverting map 
! Your choice of large map pixels excluded 0.362% of the data.
!  The x-axis pixel size should ideally be below 0.1713 milli-arcsec
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072597Jy  sigma=0.859110
! Fit after  self-cal, rms=0.072517Jy  sigma=0.858047
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.362% of the data.
!  The x-axis pixel size should ideally be below 0.1713 milli-arcsec
! Estimated beam: bmin=0.5971 mas, bmaj=1.031 mas, bpa=-1.845 degrees
! Estimated noise=0.604217 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.11173e-05 Jy
! Component: 100  -  total flux cleaned = 0.000268473 Jy
! Component: 150  -  total flux cleaned = 0.000221459 Jy
! Component: 200  -  total flux cleaned = 0.000176534 Jy
! Total flux subtracted in 200 components = 0.000176534 Jy
! Clean residual min=-0.002287 max=0.002184 Jy/beam
! Clean residual mean=0.000002 rms=0.000507 Jy/beam
! Combined flux in latest and established models = 0.951421 Jy
selfcal
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 140 components and 0.951421 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072431Jy  sigma=0.857329
! Fit after  self-cal, rms=0.072422Jy  sigma=0.857280
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.362% of the data.
!  The x-axis pixel size should ideally be below 0.1713 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.93738e-05 Jy
! Component: 100  -  total flux cleaned = 7.01475e-05 Jy
! Component: 150  -  total flux cleaned = -1.2233e-05 Jy
! Component: 200  -  total flux cleaned = -1.19538e-05 Jy
! Total flux subtracted in 200 components = -1.19538e-05 Jy
! Clean residual min=-0.002250 max=0.002175 Jy/beam
! Clean residual mean=0.000002 rms=0.000503 Jy/beam
! Combined flux in latest and established models = 0.951409 Jy
! Performing phase self-cal
! Adding 60 model components to the UV plane model.
! The established model now contains 145 components and 0.95141 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072357Jy  sigma=0.856737
! Fit after  self-cal, rms=0.072349Jy  sigma=0.856700
! Inverting map 
! Your choice of large map pixels excluded 0.362% of the data.
!  The x-axis pixel size should ideally be below 0.1713 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072349Jy  sigma=0.856700
! Fit after  self-cal, rms=0.072328Jy  sigma=0.856576
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.362% of the data.
!  The x-axis pixel size should ideally be below 0.1713 milli-arcsec
! Estimated beam: bmin=2.1 mas, bmaj=3.001 mas, bpa=58.92 degrees
! Estimated noise=0.893013 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00181542 Jy
! Component: 100  -  total flux cleaned = 0.00279084 Jy
! Component: 150  -  total flux cleaned = 0.00315451 Jy
! Component: 200  -  total flux cleaned = 0.00326867 Jy
! Total flux subtracted in 200 components = 0.00326867 Jy
! Clean residual min=-0.002119 max=0.002539 Jy/beam
! Clean residual mean=0.000004 rms=0.000632 Jy/beam
! Combined flux in latest and established models = 0.954678 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 154 components and 0.954678 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072322Jy  sigma=0.856474
! Fit after  self-cal, rms=0.072321Jy  sigma=0.856431
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.362% of the data.
!  The x-axis pixel size should ideally be below 0.1713 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000468524 Jy
! Component: 100  -  total flux cleaned = 0.000545333 Jy
! Component: 150  -  total flux cleaned = 0.000545775 Jy
! Component: 200  -  total flux cleaned = 0.000546189 Jy
! Total flux subtracted in 200 components = 0.000546189 Jy
! Clean residual min=-0.002107 max=0.002505 Jy/beam
! Clean residual mean=0.000004 rms=0.000632 Jy/beam
! Combined flux in latest and established models = 0.955224 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 163 components and 0.955224 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072317Jy  sigma=0.856399
! Fit after  self-cal, rms=0.072317Jy  sigma=0.856393
! Inverting map 
! Your choice of large map pixels excluded 0.362% of the data.
!  The x-axis pixel size should ideally be below 0.1713 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Your choice of large map pixels excluded 0.362% of the data.
!  The x-axis pixel size should ideally be below 0.1713 milli-arcsec
! Estimated beam: bmin=0.5971 mas, bmaj=1.031 mas, bpa=-1.843 degrees
! Estimated noise=0.604017 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.5971 x 1.031 at -1.843 degrees (North through East)
! Clean map  min=-0.0020208  max=0.69442 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072317Jy  sigma=0.856393
! Fit after  self-cal, rms=0.069405Jy  sigma=0.810481
! Inverting map and beam 
! Your choice of large map pixels excluded 0.362% of the data.
!  The x-axis pixel size should ideally be below 0.1713 milli-arcsec
! Estimated beam: bmin=0.5971 mas, bmaj=1.031 mas, bpa=-1.842 degrees
! Estimated noise=0.603913 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00121178 Jy
! Component: 100  -  total flux cleaned = -0.00140018 Jy
! Component: 150  -  total flux cleaned = -0.00161571 Jy
! Component: 200  -  total flux cleaned = -0.00169782 Jy
! Total flux subtracted in 200 components = -0.00169782 Jy
! Clean residual min=-0.002224 max=0.002265 Jy/beam
! Clean residual mean=0.000001 rms=0.000492 Jy/beam
! Combined flux in latest and established models = 0.953526 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 172 components and 0.953526 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069329Jy  sigma=0.809813
! Fit after  self-cal, rms=0.069324Jy  sigma=0.809783
! Inverting map 
! Your choice of large map pixels excluded 0.362% of the data.
!  The x-axis pixel size should ideally be below 0.1713 milli-arcsec
! Added new window around map position (34, -42.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000604267 Jy
! Component: 100  -  total flux cleaned = 0.000699493 Jy
! Component: 150  -  total flux cleaned = 0.000658333 Jy
! Component: 200  -  total flux cleaned = 0.000577553 Jy
! Total flux subtracted in 200 components = 0.000577553 Jy
! Clean residual min=-0.002200 max=0.002001 Jy/beam
! Clean residual mean=0.000001 rms=0.000483 Jy/beam
! Combined flux in latest and established models = 0.954104 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 181 components and 0.954104 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069224Jy  sigma=0.808502
! Fit after  self-cal, rms=0.069214Jy  sigma=0.808413
! Inverting map 
! Your choice of large map pixels excluded 0.362% of the data.
!  The x-axis pixel size should ideally be below 0.1713 milli-arcsec
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069214Jy  sigma=0.808413
! Fit after  self-cal, rms=0.069188Jy  sigma=0.808308
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.362% of the data.
!  The x-axis pixel size should ideally be below 0.1713 milli-arcsec
! Estimated beam: bmin=0.5146 mas, bmaj=0.9024 mas, bpa=-5.812 degrees
! Estimated noise=0.967293 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.54277 Jy
! Component: 100  -  total flux cleaned = 0.721184 Jy
! Component: 150  -  total flux cleaned = 0.805861 Jy
! Component: 200  -  total flux cleaned = 0.849388 Jy
! Total flux subtracted in 200 components = 0.849388 Jy
! Clean residual min=-0.009971 max=0.020851 Jy/beam
! Clean residual mean=0.000024 rms=0.001420 Jy/beam
! Combined flux in latest and established models = 0.849388 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.849388 Jy
! Inverting map and beam 
! Your choice of large map pixels excluded 0.362% of the data.
!  The x-axis pixel size should ideally be below 0.1713 milli-arcsec
! Estimated beam: bmin=0.5971 mas, bmaj=1.031 mas, bpa=-1.842 degrees
! Estimated noise=0.603781 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0312593 Jy
! Component: 100  -  total flux cleaned = 0.0487832 Jy
! Component: 150  -  total flux cleaned = 0.0606124 Jy
! Component: 200  -  total flux cleaned = 0.069157 Jy
! Total flux subtracted in 200 components = 0.069157 Jy
! Clean residual min=-0.006349 max=0.005130 Jy/beam
! Clean residual mean=0.000009 rms=0.000912 Jy/beam
! Combined flux in latest and established models = 0.918545 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 32 components and 0.918545 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.362% of the data.
!  The x-axis pixel size should ideally be below 0.1713 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.362% of the data.
!  The x-axis pixel size should ideally be below 0.1713 milli-arcsec
! Estimated beam: bmin=2.1 mas, bmaj=3.001 mas, bpa=58.91 degrees
! Estimated noise=0.892731 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0125728 Jy
! Component: 100  -  total flux cleaned = 0.0192616 Jy
! Component: 150  -  total flux cleaned = 0.0236327 Jy
! Component: 200  -  total flux cleaned = 0.026951 Jy
! Total flux subtracted in 200 components = 0.026951 Jy
! Clean residual min=-0.002702 max=0.002735 Jy/beam
! Clean residual mean=0.000007 rms=0.000803 Jy/beam
! Combined flux in latest and established models = 0.945496 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00266474 Jy
! Component: 100  -  total flux cleaned = 0.00462671 Jy
! Component: 150  -  total flux cleaned = 0.00600293 Jy
! Component: 200  -  total flux cleaned = 0.0072089 Jy
! Total flux subtracted in 200 components = 0.0072089 Jy
! Clean residual min=-0.002414 max=0.002260 Jy/beam
! Clean residual mean=0.000004 rms=0.000664 Jy/beam
! Combined flux in latest and established models = 0.952705 Jy
! Adding 81 model components to the UV plane model.
! The established model now contains 111 components and 0.952705 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.362% of the data.
!  The x-axis pixel size should ideally be below 0.1713 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Your choice of large map pixels excluded 0.362% of the data.
!  The x-axis pixel size should ideally be below 0.1713 milli-arcsec
! Estimated beam: bmin=0.5971 mas, bmaj=1.031 mas, bpa=-1.842 degrees
! Estimated noise=0.603781 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.14228e-05 Jy
! Component: 100  -  total flux cleaned = -0.000810564 Jy
! Component: 150  -  total flux cleaned = -0.000803358 Jy
! Component: 200  -  total flux cleaned = -0.000533217 Jy
! Total flux subtracted in 200 components = -0.000533217 Jy
! Clean residual min=-0.004316 max=0.002706 Jy/beam
! Clean residual mean=0.000001 rms=0.000582 Jy/beam
! Combined flux in latest and established models = 0.952172 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 120 components and 0.952172 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071011Jy  sigma=0.830305
! Fit after  self-cal, rms=0.070764Jy  sigma=0.826811
wmodel J0958+6533_X_map.mod
! Writing 120 model components to file: J0958+6533_X_map.mod
wobs   J0958+6533_X_uvs.fits
! Writing UV FITS file: J0958+6533_X_uvs.fits
wwins  J0958+6533_X_map.win
! wwins: Wrote 12 windows to J0958+6533_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! Your choice of large map pixels excluded 0.362% of the data.
!  The x-axis pixel size should ideally be below 0.1713 milli-arcsec
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000815582 Jy
! Component: 100  -  total flux cleaned = -0.00126852 Jy
! Component: 150  -  total flux cleaned = -0.00168397 Jy
! Component: 200  -  total flux cleaned = -0.0019279 Jy
! Component: 250  -  total flux cleaned = -0.00220638 Jy
! Component: 300  -  total flux cleaned = -0.00243055 Jy
! Component: 350  -  total flux cleaned = -0.00251797 Jy
! Component: 400  -  total flux cleaned = -0.00260395 Jy
! Component: 450  -  total flux cleaned = -0.00260406 Jy
! Component: 500  -  total flux cleaned = -0.00276897 Jy
! Component: 550  -  total flux cleaned = -0.00284962 Jy
! Component: 600  -  total flux cleaned = -0.00288926 Jy
! Component: 650  -  total flux cleaned = -0.00292818 Jy
! Component: 700  -  total flux cleaned = -0.00296678 Jy
! Component: 750  -  total flux cleaned = -0.00288993 Jy
! Component: 800  -  total flux cleaned = -0.00292773 Jy
! Component: 850  -  total flux cleaned = -0.00285321 Jy
! Component: 900  -  total flux cleaned = -0.00289023 Jy
! Component: 950  -  total flux cleaned = -0.00285363 Jy
! Component: 1000  -  total flux cleaned = -0.00267255 Jy
! Component: 1050  -  total flux cleaned = -0.00270816 Jy
! Component: 1100  -  total flux cleaned = -0.00256554 Jy
! Component: 1150  -  total flux cleaned = -0.00238893 Jy
! Component: 1200  -  total flux cleaned = -0.0024237 Jy
! Component: 1250  -  total flux cleaned = -0.00235403 Jy
! Component: 1300  -  total flux cleaned = -0.00214788 Jy
! Component: 1350  -  total flux cleaned = -0.00214855 Jy
! Component: 1400  -  total flux cleaned = -0.00197998 Jy
! Component: 1450  -  total flux cleaned = -0.00204782 Jy
! Component: 1500  -  total flux cleaned = -0.00211453 Jy
! Component: 1550  -  total flux cleaned = -0.00211496 Jy
! Component: 1600  -  total flux cleaned = -0.0020493 Jy
! Component: 1650  -  total flux cleaned = -0.00211449 Jy
! Component: 1700  -  total flux cleaned = -0.00211461 Jy
! Component: 1750  -  total flux cleaned = -0.00221092 Jy
! Component: 1800  -  total flux cleaned = -0.00230661 Jy
! Component: 1850  -  total flux cleaned = -0.00217976 Jy
! Component: 1900  -  total flux cleaned = -0.0024318 Jy
! Component: 1950  -  total flux cleaned = -0.00243165 Jy
! Component: 2000  -  total flux cleaned = -0.00230705 Jy
! Component: 2050  -  total flux cleaned = -0.00249281 Jy
! Component: 2100  -  total flux cleaned = -0.00246219 Jy
! Component: 2150  -  total flux cleaned = -0.00255423 Jy
! Component: 2200  -  total flux cleaned = -0.00255441 Jy
! Component: 2250  -  total flux cleaned = -0.00261502 Jy
! Component: 2300  -  total flux cleaned = -0.00267531 Jy
! Component: 2350  -  total flux cleaned = -0.00270529 Jy
! Component: 2400  -  total flux cleaned = -0.00273496 Jy
! Component: 2450  -  total flux cleaned = -0.00288309 Jy
! Component: 2500  -  total flux cleaned = -0.00285351 Jy
! Component: 2550  -  total flux cleaned = -0.00279473 Jy
! Component: 2600  -  total flux cleaned = -0.0029407 Jy
! Component: 2650  -  total flux cleaned = -0.00308614 Jy
! Component: 2700  -  total flux cleaned = -0.00288332 Jy
! Component: 2750  -  total flux cleaned = -0.00294104 Jy
! Component: 2800  -  total flux cleaned = -0.00314203 Jy
! Component: 2850  -  total flux cleaned = -0.00317039 Jy
! Component: 2900  -  total flux cleaned = -0.00328399 Jy
! Component: 2950  -  total flux cleaned = -0.00348225 Jy
! Component: 3000  -  total flux cleaned = -0.00339759 Jy
! Component: 3050  -  total flux cleaned = -0.00339743 Jy
! Component: 3100  -  total flux cleaned = -0.00348135 Jy
! Component: 3150  -  total flux cleaned = -0.00348132 Jy
! Component: 3200  -  total flux cleaned = -0.00345358 Jy
! Component: 3250  -  total flux cleaned = -0.00356407 Jy
! Component: 3300  -  total flux cleaned = -0.00359157 Jy
! Component: 3350  -  total flux cleaned = -0.00356434 Jy
! Component: 3400  -  total flux cleaned = -0.0037281 Jy
! Component: 3450  -  total flux cleaned = -0.00370059 Jy
! Component: 3500  -  total flux cleaned = -0.00364635 Jy
! Component: 3550  -  total flux cleaned = -0.00375389 Jy
! Component: 3600  -  total flux cleaned = -0.00370002 Jy
! Component: 3650  -  total flux cleaned = -0.00367316 Jy
! Component: 3700  -  total flux cleaned = -0.00364651 Jy
! Component: 3750  -  total flux cleaned = -0.00372633 Jy
! Component: 3800  -  total flux cleaned = -0.00380573 Jy
! Component: 3850  -  total flux cleaned = -0.00383196 Jy
! Component: 3900  -  total flux cleaned = -0.0038055 Jy
! Component: 3950  -  total flux cleaned = -0.00385779 Jy
! Component: 4000  -  total flux cleaned = -0.00388407 Jy
! Component: 4050  -  total flux cleaned = -0.00396223 Jy
! Total flux subtracted in 4096 components = -0.00396231 Jy
! Clean residual min=-0.001564 max=0.001504 Jy/beam
! Clean residual mean=0.000001 rms=0.000415 Jy/beam
! Combined flux in latest and established models = 0.94821 Jy
keep
! Adding 327 model components to the UV plane model.
! The established model now contains 440 components and 0.948209 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv118_uvs/J0958+6533_X_map.fits
! Inverting map 
! Your choice of large map pixels excluded 0.362% of the data.
!  The x-axis pixel size should ideally be below 0.1713 milli-arcsec
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.5971 x 1.031 at -1.842 degrees (North through East)
! Clean map  min=-0.0019559  max=0.69423 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv118_uvs/J0958+6533_X_map.fits
wmodel /scr/pima/rv118_uvs/J0958+6533_X_map.mod
! Writing 440 model components to file: /scr/pima/rv118_uvs/J0958+6533_X_map.mod
wobs   /scr/pima/rv118_uvs/J0958+6533_X_uvs.fits
! Writing UV FITS file: /scr/pima/rv118_uvs/J0958+6533_X_uvs.fits
wwins  /scr/pima/rv118_uvs/J0958+6533_X_map.win
! wwins: Wrote 13 windows to /scr/pima/rv118_uvs/J0958+6533_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.694234 
invert
! Inverting map 
! Your choice of large map pixels excluded 0.362% of the data.
!  The x-axis pixel size should ideally be below 0.1713 milli-arcsec
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000414459 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.179101 0.179101 0.358201 0.716403 1.43281 2.86561 5.73122 11.4624 22.9249 45.8498 91.6996
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0012 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.694 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1675.04 
quit
! Quitting program
! Log file /scr/pima/rv118_uvs/J0958+6533_X_dfm.log closed on Sun Dec 10 00:08:56 2017