! Started logfile: /scr/pima/rv118_uvs/J0840-0910_X_dfm.log on Sun Dec 10 00:08:37 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv118_uvs/J0840-0910_X_uva.fits ! Reading UV FITS file: /scr/pima/rv118_uvs/J0840-0910_X_uva.fits ! AN table 1: 58 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.97318 visibilities/baseline/integration-bin. ! Found source: J0840-0910 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 8128 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0840-0910_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.002015Jy sigma=19.071001 ! Fit after self-cal, rms=0.951627Jy sigma=18.103056 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9442 mas, bmaj=2.607 mas, bpa=20.56 degrees ! Estimated noise=0.792542 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0381283 Jy ! Component: 100 - total flux cleaned = 0.047161 Jy ! Total flux subtracted in 100 components = 0.047161 Jy ! Clean residual min=-0.004596 max=0.003784 Jy/beam ! Clean residual mean=0.000004 rms=0.000841 Jy/beam ! Combined flux in latest and established models = 0.047161 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.047161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057614Jy sigma=0.978985 ! Fit after self-cal, rms=0.056236Jy sigma=0.954017 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.196 mas, bmaj=2.953 mas, bpa=17.54 degrees ! Estimated noise=0.426047 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00579021 Jy ! Component: 100 - total flux cleaned = 0.00827317 Jy ! Component: 150 - total flux cleaned = 0.00946689 Jy ! Component: 200 - total flux cleaned = 0.0101826 Jy ! Total flux subtracted in 200 components = 0.0101826 Jy ! Clean residual min=-0.001744 max=0.001750 Jy/beam ! Clean residual mean=-0.000001 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.0573436 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 29 components and 0.0573436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055735Jy sigma=0.942614 ! Fit after self-cal, rms=0.055738Jy sigma=0.942246 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.196 x 2.953 at 17.54 degrees (North through East) ! Clean map min=-0.001754 max=0.05131 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.94 HN 1.07 KP 0.96 ! LA 1.02 NL 1.02 OV 0.96 PT 1.02 ! SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.99 HN 0.97 KP 1.02 ! LA 1.05 NL 1.02 OV 1.02 PT 1.00 ! SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.97 HN 1.01 KP 1.00 ! LA 0.99 NL 1.02 OV 1.01 PT 0.99 ! SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 1.00 KP 1.01 ! LA 1.04 NL 0.94 OV 0.94 PT 0.94 ! SC 0.91 ! ! ! Fit before self-cal, rms=0.055738Jy sigma=0.942246 ! Fit after self-cal, rms=0.054784Jy sigma=0.940829 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.194 mas, bmaj=2.957 mas, bpa=17.66 degrees ! Estimated noise=0.423341 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000549993 Jy ! Component: 100 - total flux cleaned = 0.000684018 Jy ! Component: 150 - total flux cleaned = 0.000725993 Jy ! Component: 200 - total flux cleaned = 0.000744432 Jy ! Total flux subtracted in 200 components = 0.000744432 Jy ! Clean residual min=-0.001687 max=0.001721 Jy/beam ! Clean residual mean=-0.000000 rms=0.000432 Jy/beam ! Combined flux in latest and established models = 0.0580881 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 36 components and 0.0580881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054778Jy sigma=0.940707 ! Fit after self-cal, rms=0.054783Jy sigma=0.940636 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054783Jy sigma=0.940636 ! Fit after self-cal, rms=0.055216Jy sigma=0.939365 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.187 mas, bmaj=2.944 mas, bpa=17.34 degrees ! Estimated noise=0.423612 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000515292 Jy ! Component: 100 - total flux cleaned = 0.000601073 Jy ! Component: 150 - total flux cleaned = 0.000653966 Jy ! Component: 200 - total flux cleaned = 0.000700723 Jy ! Total flux subtracted in 200 components = 0.000700723 Jy ! Clean residual min=-0.001703 max=0.001649 Jy/beam ! Clean residual mean=0.000002 rms=0.000417 Jy/beam ! Combined flux in latest and established models = 0.0587888 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 42 components and 0.0587888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055209Jy sigma=0.939255 ! Fit after self-cal, rms=0.055224Jy sigma=0.939174 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.38981e-05 Jy ! Component: 100 - total flux cleaned = 9.77099e-05 Jy ! Component: 150 - total flux cleaned = 0.000127633 Jy ! Component: 200 - total flux cleaned = 0.000148276 Jy ! Total flux subtracted in 200 components = 0.000148276 Jy ! Clean residual min=-0.001709 max=0.001656 Jy/beam ! Clean residual mean=0.000002 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.058937 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 45 components and 0.058937 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055221Jy sigma=0.939137 ! Fit after self-cal, rms=0.055220Jy sigma=0.939134 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055220Jy sigma=0.939134 ! Fit after self-cal, rms=0.055227Jy sigma=0.939084 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.183 mas, bmaj=2.936 mas, bpa=17.26 degrees ! Estimated noise=0.423885 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000369868 Jy ! Component: 100 - total flux cleaned = 0.000484209 Jy ! Component: 150 - total flux cleaned = 0.000523408 Jy ! Component: 200 - total flux cleaned = 0.000565057 Jy ! Total flux subtracted in 200 components = 0.000565057 Jy ! Clean residual min=-0.001693 max=0.001659 Jy/beam ! Clean residual mean=0.000002 rms=0.000415 Jy/beam ! Combined flux in latest and established models = 0.0595021 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 49 components and 0.0595021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055223Jy sigma=0.939035 ! Fit after self-cal, rms=0.055223Jy sigma=0.939029 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.59401e-05 Jy ! Component: 100 - total flux cleaned = 6.97432e-05 Jy ! Component: 150 - total flux cleaned = 8.05052e-05 Jy ! Component: 200 - total flux cleaned = 9.61888e-05 Jy ! Total flux subtracted in 200 components = 9.61888e-05 Jy ! Clean residual min=-0.001698 max=0.001654 Jy/beam ! Clean residual mean=0.000002 rms=0.000415 Jy/beam ! Combined flux in latest and established models = 0.0595983 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 51 components and 0.0595983 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055221Jy sigma=0.939011 ! Fit after self-cal, rms=0.055221Jy sigma=0.939010 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055221Jy sigma=0.939010 ! Fit after self-cal, rms=0.055220Jy sigma=0.938987 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.309 mas, bmaj=3.971 mas, bpa=6.841 degrees ! Estimated noise=0.482148 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000516771 Jy ! Component: 100 - total flux cleaned = 0.000576242 Jy ! Component: 150 - total flux cleaned = 0.000600555 Jy ! Component: 200 - total flux cleaned = 0.000617756 Jy ! Total flux subtracted in 200 components = 0.000617756 Jy ! Clean residual min=-0.001921 max=0.001729 Jy/beam ! Clean residual mean=0.000003 rms=0.000515 Jy/beam ! Combined flux in latest and established models = 0.060216 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 56 components and 0.060216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055220Jy sigma=0.939002 ! Fit after self-cal, rms=0.055221Jy sigma=0.938976 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.01326e-05 Jy ! Component: 100 - total flux cleaned = 5.61753e-05 Jy ! Component: 150 - total flux cleaned = 6.13006e-05 Jy ! Component: 200 - total flux cleaned = 7.17443e-05 Jy ! Total flux subtracted in 200 components = 7.17443e-05 Jy ! Clean residual min=-0.001908 max=0.001730 Jy/beam ! Clean residual mean=0.000003 rms=0.000515 Jy/beam ! Combined flux in latest and established models = 0.0602878 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 58 components and 0.0602878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055221Jy sigma=0.938985 ! Fit after self-cal, rms=0.055221Jy sigma=0.938976 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.18 mas, bmaj=2.931 mas, bpa=17.24 degrees ! Estimated noise=0.424317 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.18 x 2.931 at 17.24 degrees (North through East) ! Clean map min=-0.0016626 max=0.050429 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9353 mas, bmaj=2.589 mas, bpa=20.2 degrees ! Estimated noise=0.781592 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0385902 Jy ! Component: 100 - total flux cleaned = 0.0484836 Jy ! Component: 150 - total flux cleaned = 0.0529884 Jy ! Component: 200 - total flux cleaned = 0.055359 Jy ! Total flux subtracted in 200 components = 0.055359 Jy ! Clean residual min=-0.003500 max=0.003350 Jy/beam ! Clean residual mean=0.000004 rms=0.000750 Jy/beam ! Combined flux in latest and established models = 0.0553591 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0553591 Jy ! Inverting map and beam ! Estimated beam: bmin=1.18 mas, bmaj=2.931 mas, bpa=17.24 degrees ! Estimated noise=0.424317 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00222029 Jy ! Component: 100 - total flux cleaned = 0.00333545 Jy ! Component: 150 - total flux cleaned = 0.00397511 Jy ! Component: 200 - total flux cleaned = 0.00437161 Jy ! Total flux subtracted in 200 components = 0.00437161 Jy ! Clean residual min=-0.001742 max=0.001742 Jy/beam ! Clean residual mean=0.000002 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.0597307 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 28 components and 0.0597307 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.309 mas, bmaj=3.971 mas, bpa=6.841 degrees ! Estimated noise=0.482148 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000451413 Jy ! Component: 100 - total flux cleaned = 0.00046138 Jy ! Component: 150 - total flux cleaned = 0.000454486 Jy ! Component: 200 - total flux cleaned = 0.000448188 Jy ! Total flux subtracted in 200 components = 0.000448188 Jy ! Clean residual min=-0.001919 max=0.001739 Jy/beam ! Clean residual mean=0.000003 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.0601789 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.3007e-07 Jy ! Component: 100 - total flux cleaned = 2.41787e-08 Jy ! Component: 150 - total flux cleaned = 1.10849e-05 Jy ! Component: 200 - total flux cleaned = 1.11392e-05 Jy ! Total flux subtracted in 200 components = 1.11392e-05 Jy ! Clean residual min=-0.001919 max=0.001738 Jy/beam ! Clean residual mean=0.000003 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 0.06019 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 37 components and 0.06019 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.18 mas, bmaj=2.931 mas, bpa=17.24 degrees ! Estimated noise=0.424317 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000135545 Jy ! Component: 100 - total flux cleaned = -0.000103051 Jy ! Component: 150 - total flux cleaned = -9.34923e-05 Jy ! Component: 200 - total flux cleaned = -7.67869e-05 Jy ! Total flux subtracted in 200 components = -7.67869e-05 Jy ! Clean residual min=-0.001728 max=0.001666 Jy/beam ! Clean residual mean=0.000002 rms=0.000417 Jy/beam ! Combined flux in latest and established models = 0.0601132 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 44 components and 0.0601132 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055224Jy sigma=0.939061 ! Fit after self-cal, rms=0.055224Jy sigma=0.939036 wmodel J0840-0910_X_map.mod ! Writing 44 model components to file: J0840-0910_X_map.mod wobs J0840-0910_X_uvs.fits ! Writing UV FITS file: J0840-0910_X_uvs.fits wwins J0840-0910_X_map.win ! wwins: Wrote 1 windows to J0840-0910_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000446426 Jy ! Component: 100 - total flux cleaned = -0.00047521 Jy ! Component: 150 - total flux cleaned = -0.000476185 Jy ! Component: 200 - total flux cleaned = -0.000476683 Jy ! Component: 250 - total flux cleaned = -0.000502004 Jy ! Component: 300 - total flux cleaned = -0.000574083 Jy ! Component: 350 - total flux cleaned = -0.000621007 Jy ! Component: 400 - total flux cleaned = -0.000644354 Jy ! Component: 450 - total flux cleaned = -0.000577659 Jy ! Component: 500 - total flux cleaned = -0.000533886 Jy ! Component: 550 - total flux cleaned = -0.000448512 Jy ! Component: 600 - total flux cleaned = -0.000448737 Jy ! Component: 650 - total flux cleaned = -0.000407264 Jy ! Component: 700 - total flux cleaned = -0.000406825 Jy ! Component: 750 - total flux cleaned = -0.000326967 Jy ! Component: 800 - total flux cleaned = -0.000248473 Jy ! Component: 850 - total flux cleaned = -0.000113347 Jy ! Component: 900 - total flux cleaned = -3.77702e-05 Jy ! Component: 950 - total flux cleaned = 3.72773e-05 Jy ! Component: 1000 - total flux cleaned = 0.00012976 Jy ! Component: 1050 - total flux cleaned = 0.000111879 Jy ! Component: 1100 - total flux cleaned = 0.000255938 Jy ! Component: 1150 - total flux cleaned = 0.000220429 Jy ! Component: 1200 - total flux cleaned = 0.000273419 Jy ! Component: 1250 - total flux cleaned = 0.000342622 Jy ! Component: 1300 - total flux cleaned = 0.000359949 Jy ! Component: 1350 - total flux cleaned = 0.000360319 Jy ! Component: 1400 - total flux cleaned = 0.000327003 Jy ! Component: 1450 - total flux cleaned = 0.000359987 Jy ! Component: 1500 - total flux cleaned = 0.000327233 Jy ! Component: 1550 - total flux cleaned = 0.000359443 Jy ! Component: 1600 - total flux cleaned = 0.000311412 Jy ! Component: 1650 - total flux cleaned = 0.000279514 Jy ! Component: 1700 - total flux cleaned = 0.000279387 Jy ! Component: 1750 - total flux cleaned = 0.000248066 Jy ! Component: 1800 - total flux cleaned = 0.000140469 Jy ! Component: 1850 - total flux cleaned = 0.000231868 Jy ! Component: 1900 - total flux cleaned = 0.00014142 Jy ! Component: 1950 - total flux cleaned = 0.000126495 Jy ! Component: 2000 - total flux cleaned = 0.000126389 Jy ! Component: 2050 - total flux cleaned = 0.000126192 Jy ! Component: 2100 - total flux cleaned = 0.000111725 Jy ! Component: 2150 - total flux cleaned = 8.2769e-05 Jy ! Component: 2200 - total flux cleaned = 3.95627e-05 Jy ! Component: 2250 - total flux cleaned = 2.54093e-05 Jy ! Component: 2300 - total flux cleaned = 6.77945e-05 Jy ! Component: 2350 - total flux cleaned = 5.40642e-05 Jy ! Component: 2400 - total flux cleaned = 2.64405e-05 Jy ! Component: 2450 - total flux cleaned = -8.44783e-07 Jy ! Component: 2500 - total flux cleaned = 5.38627e-05 Jy ! Component: 2550 - total flux cleaned = 9.43675e-05 Jy ! Component: 2600 - total flux cleaned = 4.07848e-05 Jy ! Component: 2650 - total flux cleaned = 5.3902e-05 Jy ! Component: 2700 - total flux cleaned = 5.38865e-05 Jy ! Component: 2750 - total flux cleaned = 9.31274e-05 Jy ! Component: 2800 - total flux cleaned = 9.31009e-05 Jy ! Component: 2850 - total flux cleaned = 5.42019e-05 Jy ! Component: 2900 - total flux cleaned = 5.42544e-05 Jy ! Component: 2950 - total flux cleaned = 6.69519e-05 Jy ! Component: 3000 - total flux cleaned = 4.15426e-05 Jy ! Component: 3050 - total flux cleaned = 0.000104111 Jy ! Component: 3100 - total flux cleaned = 9.17089e-05 Jy ! Component: 3150 - total flux cleaned = 0.000103978 Jy ! Component: 3200 - total flux cleaned = 7.936e-05 Jy ! Component: 3250 - total flux cleaned = 6.72558e-05 Jy ! Component: 3300 - total flux cleaned = 9.15223e-05 Jy ! Component: 3350 - total flux cleaned = 0.000127683 Jy ! Component: 3400 - total flux cleaned = 0.000103716 Jy ! Component: 3450 - total flux cleaned = 9.1829e-05 Jy ! Component: 3500 - total flux cleaned = 0.000103495 Jy ! Component: 3550 - total flux cleaned = 9.16735e-05 Jy ! Component: 3600 - total flux cleaned = 0.000138452 Jy ! Component: 3650 - total flux cleaned = 9.18247e-05 Jy ! Component: 3700 - total flux cleaned = 9.17969e-05 Jy ! Component: 3750 - total flux cleaned = 6.89327e-05 Jy ! Component: 3800 - total flux cleaned = 5.75479e-05 Jy ! Component: 3850 - total flux cleaned = 3.485e-05 Jy ! Component: 3900 - total flux cleaned = 8.00794e-05 Jy ! Component: 3950 - total flux cleaned = 0.000102544 Jy ! Component: 4000 - total flux cleaned = 6.90079e-05 Jy ! Component: 4050 - total flux cleaned = 0.000146786 Jy ! Total flux subtracted in 4096 components = 0.000135605 Jy ! Clean residual min=-0.000765 max=0.000653 Jy/beam ! Clean residual mean=-0.000001 rms=0.000200 Jy/beam ! Combined flux in latest and established models = 0.0602488 Jy keep ! Adding 288 model components to the UV plane model. ! The established model now contains 332 components and 0.0602488 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv118_uvs/J0840-0910_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.18 x 2.931 at 17.24 degrees (North through East) ! Clean map min=-0.0012524 max=0.05011 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv118_uvs/J0840-0910_X_map.fits wmodel /scr/pima/rv118_uvs/J0840-0910_X_map.mod ! Writing 332 model components to file: /scr/pima/rv118_uvs/J0840-0910_X_map.mod wobs /scr/pima/rv118_uvs/J0840-0910_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv118_uvs/J0840-0910_X_uvs.fits wwins /scr/pima/rv118_uvs/J0840-0910_X_map.win ! wwins: Wrote 2 windows to /scr/pima/rv118_uvs/J0840-0910_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0501101 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000200122 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.19809 1.19809 2.39618 4.79237 9.58473 19.1695 38.3389 76.6779 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.05 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 250.398 quit ! Quitting program ! Log file /scr/pima/rv118_uvs/J0840-0910_X_dfm.log closed on Sun Dec 10 00:08:41 2017