! Started logfile: /scr/pima/rv118_uvs/J0807+0432_X_dfm.log on Sun Dec 10 00:08:13 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.36575
obs     /scr/pima/rv118_uvs/J0807+0432_X_uva.fits
! Reading UV FITS file: /scr/pima/rv118_uvs/J0807+0432_X_uva.fits
! AN table 1: 29 integrations on 45 of 45 possible baselines.
! AN table 2: 89 integrations on 66 of 66 possible baselines.
! Apparent sampling: 0.445745 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0807+0432
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.36575e+09        8e+06          1        8e+06
!  02        2  8.44575e+09        8e+06          1        8e+06
!  03        3  8.80575e+09        8e+06          1        8e+06
!  04        4  8.92575e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 12800 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0807+0432_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  A total of 596 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  A total of 596 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  A total of 596 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  A total of 596 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.016004Jy  sigma=16.479581
! Fit after  self-cal, rms=0.866808Jy  sigma=13.962959
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 6.46% of the data.
!  The x-axis pixel size should ideally be below 0.1642 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1853 milli-arcsec
! Estimated beam: bmin=0.6129 mas, bmaj=1.142 mas, bpa=-0.806 degrees
! Estimated noise=0.711704 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.107765 Jy
! Component: 100  -  total flux cleaned = 0.139931 Jy
! Total flux subtracted in 100 components = 0.139931 Jy
! Clean residual min=-0.019413 max=0.075649 Jy/beam
! Clean residual mean=-0.000050 rms=0.004025 Jy/beam
! Combined flux in latest and established models = 0.139931 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.139931 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.123093Jy  sigma=1.975919
! Fit after  self-cal, rms=0.122096Jy  sigma=1.959737
! Inverting map 
! Your choice of large map pixels excluded 6.46% of the data.
!  The x-axis pixel size should ideally be below 0.1642 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1853 milli-arcsec
! Added new window around map position (-5.2, 3.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0628683 Jy
! Component: 100  -  total flux cleaned = 0.0846961 Jy
! Total flux subtracted in 100 components = 0.0846961 Jy
! Clean residual min=-0.011439 max=0.020309 Jy/beam
! Clean residual mean=-0.000031 rms=0.002301 Jy/beam
! Combined flux in latest and established models = 0.224627 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 16 components and 0.224627 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090437Jy  sigma=1.336388
! Fit after  self-cal, rms=0.081304Jy  sigma=1.182778
! Inverting map 
! Your choice of large map pixels excluded 6.46% of the data.
!  The x-axis pixel size should ideally be below 0.1642 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1853 milli-arcsec
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0246423 Jy
! Component: 100  -  total flux cleaned = 0.0357783 Jy
! Total flux subtracted in 100 components = 0.0357783 Jy
! Clean residual min=-0.004888 max=0.011712 Jy/beam
! Clean residual mean=-0.000017 rms=0.001170 Jy/beam
! Combined flux in latest and established models = 0.260405 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 22 components and 0.260405 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073845Jy  sigma=1.016852
! Fit after  self-cal, rms=0.072992Jy  sigma=1.000366
! Inverting map 
! Your choice of large map pixels excluded 6.46% of the data.
!  The x-axis pixel size should ideally be below 0.1642 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1853 milli-arcsec
! Added new window around map position (-1, 0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0114981 Jy
! Component: 100  -  total flux cleaned = 0.018378 Jy
! Total flux subtracted in 100 components = 0.018378 Jy
! Clean residual min=-0.003986 max=0.005456 Jy/beam
! Clean residual mean=-0.000009 rms=0.000858 Jy/beam
! Combined flux in latest and established models = 0.278783 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 33 components and 0.278783 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070968Jy  sigma=0.952130
! Fit after  self-cal, rms=0.070869Jy  sigma=0.950772
! Inverting map 
! Your choice of large map pixels excluded 6.46% of the data.
!  The x-axis pixel size should ideally be below 0.1642 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1853 milli-arcsec
! Added new window around map position (-3.6, 1.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00598806 Jy
! Component: 100  -  total flux cleaned = 0.0104593 Jy
! Total flux subtracted in 100 components = 0.0104593 Jy
! Clean residual min=-0.003589 max=0.004184 Jy/beam
! Clean residual mean=-0.000006 rms=0.000760 Jy/beam
! Combined flux in latest and established models = 0.289243 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 44 components and 0.289243 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070248Jy  sigma=0.934492
! Fit after  self-cal, rms=0.070235Jy  sigma=0.934210
! Inverting map 
! Your choice of large map pixels excluded 6.46% of the data.
!  The x-axis pixel size should ideally be below 0.1642 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1853 milli-arcsec
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 6.46% of the data.
!  The x-axis pixel size should ideally be below 0.1642 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1853 milli-arcsec
! Estimated beam: bmin=0.7216 mas, bmaj=1.373 mas, bpa=-3.452 degrees
! Estimated noise=0.415704 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2, 0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00564448 Jy
! Component: 100  -  total flux cleaned = 0.00953344 Jy
! Component: 150  -  total flux cleaned = 0.0123785 Jy
! Component: 200  -  total flux cleaned = 0.0145119 Jy
! Total flux subtracted in 200 components = 0.0145119 Jy
! Clean residual min=-0.002257 max=0.002539 Jy/beam
! Clean residual mean=-0.000005 rms=0.000523 Jy/beam
! Combined flux in latest and established models = 0.303754 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 59 components and 0.303754 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069749Jy  sigma=0.921932
! Fit after  self-cal, rms=0.069745Jy  sigma=0.921751
! Inverting map 
! Your choice of large map pixels excluded 6.46% of the data.
!  The x-axis pixel size should ideally be below 0.1642 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1853 milli-arcsec
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7216 x 1.373 at -3.452 degrees (North through East)
! Clean map  min=-0.0019436  max=0.13499 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.03     KK        1.02     
!   KP        1.00     LA        0.98     NL        0.94     OV        1.01     
!   PT        0.98     SC        0.99     
! 
!  A total of 24 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.04     FD        0.95     HH        0.93     HN        1.00     
!   KP        1.00     LA        0.98     NL        0.97     NY        1.08     
!   OV        0.98     PT        0.99     SC        0.96     WZ        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.04     KK        0.96     
!   KP        1.01     LA        0.97     NL        0.96     OV        1.01     
!   PT        0.97     SC        1.07     
! 
!  A total of 24 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     FD        0.97     HH        1.05     HN        1.00     
!   KP        1.01     LA        0.99     NL        1.00     NY        1.04     
!   OV        0.99     PT        1.00     SC        1.00     WZ        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.96     HN        1.03     KK        1.02     
!   KP        1.02     LA        0.98     NL        0.97     OV        1.00     
!   PT        0.98     SC        1.06     
! 
!  A total of 24 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     FD        0.99     HH        1.02     HN        1.01     
!   KP        1.05     LA        0.99     NL        0.99     NY        1.04     
!   OV        1.03     PT        0.99     SC        0.98     WZ        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.97     HN        1.05     KK        0.97     
!   KP        1.03     LA        0.99     NL        0.95     OV        1.03     
!   PT        0.98     SC        1.05     
! 
!  A total of 24 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.05     FD        0.97     HH        1.09     HN        1.02     
!   KP        1.01     LA        1.02     NL        0.99     NY        1.05     
!   OV        1.03     PT        0.98     SC        0.99     WZ        0.96     
! 
! 
! Fit before self-cal, rms=0.069745Jy  sigma=0.921751
! Fit after  self-cal, rms=0.070633Jy  sigma=0.915124
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 6.3% of the data.
!  The x-axis pixel size should ideally be below 0.1642 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1853 milli-arcsec
! Estimated beam: bmin=0.7214 mas, bmaj=1.414 mas, bpa=-3.726 degrees
! Estimated noise=0.415237 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000142581 Jy
! Component: 100  -  total flux cleaned = 0.000310169 Jy
! Component: 150  -  total flux cleaned = 0.000428591 Jy
! Component: 200  -  total flux cleaned = 0.000509335 Jy
! Total flux subtracted in 200 components = 0.000509335 Jy
! Clean residual min=-0.001735 max=0.001673 Jy/beam
! Clean residual mean=0.000001 rms=0.000405 Jy/beam
! Combined flux in latest and established models = 0.304264 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 74 components and 0.304264 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070592Jy  sigma=0.914598
! Fit after  self-cal, rms=0.070626Jy  sigma=0.914519
! Inverting map 
! Your choice of large map pixels excluded 6.3% of the data.
!  The x-axis pixel size should ideally be below 0.1642 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1853 milli-arcsec
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070626Jy  sigma=0.914519
! Fit after  self-cal, rms=0.071278Jy  sigma=0.913340
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 6.3% of the data.
!  The x-axis pixel size should ideally be below 0.1642 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1853 milli-arcsec
! Estimated beam: bmin=0.7232 mas, bmaj=1.414 mas, bpa=-3.778 degrees
! Estimated noise=0.415685 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000205516 Jy
! Component: 100  -  total flux cleaned = 0.000282833 Jy
! Component: 150  -  total flux cleaned = 0.00035346 Jy
! Component: 200  -  total flux cleaned = 0.000376481 Jy
! Total flux subtracted in 200 components = 0.000376481 Jy
! Clean residual min=-0.001673 max=0.001642 Jy/beam
! Clean residual mean=0.000000 rms=0.000395 Jy/beam
! Combined flux in latest and established models = 0.30464 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 79 components and 0.30464 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071250Jy  sigma=0.913065
! Fit after  self-cal, rms=0.071267Jy  sigma=0.913044
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 6.3% of the data.
!  The x-axis pixel size should ideally be below 0.1642 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1853 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.92101e-06 Jy
! Component: 100  -  total flux cleaned = 3.76511e-05 Jy
! Component: 150  -  total flux cleaned = 3.78224e-05 Jy
! Component: 200  -  total flux cleaned = 5.72435e-05 Jy
! Total flux subtracted in 200 components = 5.72435e-05 Jy
! Clean residual min=-0.001674 max=0.001625 Jy/beam
! Clean residual mean=0.000000 rms=0.000393 Jy/beam
! Combined flux in latest and established models = 0.304697 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 81 components and 0.304697 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071248Jy  sigma=0.912885
! Fit after  self-cal, rms=0.071247Jy  sigma=0.912880
! Inverting map 
! Your choice of large map pixels excluded 6.3% of the data.
!  The x-axis pixel size should ideally be below 0.1642 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1853 milli-arcsec
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071247Jy  sigma=0.912880
! Fit after  self-cal, rms=0.071372Jy  sigma=0.912784
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 6.3% of the data.
!  The x-axis pixel size should ideally be below 0.1642 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1853 milli-arcsec
! Estimated beam: bmin=0.7234 mas, bmaj=1.414 mas, bpa=-3.842 degrees
! Estimated noise=0.415526 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.78762e-05 Jy
! Component: 100  -  total flux cleaned = 0.000147975 Jy
! Component: 150  -  total flux cleaned = 0.000166439 Jy
! Component: 200  -  total flux cleaned = 0.000202541 Jy
! Total flux subtracted in 200 components = 0.000202541 Jy
! Clean residual min=-0.001674 max=0.001624 Jy/beam
! Clean residual mean=0.000000 rms=0.000391 Jy/beam
! Combined flux in latest and established models = 0.3049 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 84 components and 0.3049 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071355Jy  sigma=0.912640
! Fit after  self-cal, rms=0.071365Jy  sigma=0.912633
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 6.3% of the data.
!  The x-axis pixel size should ideally be below 0.1642 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1853 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.85995e-06 Jy
! Component: 100  -  total flux cleaned = 1.46323e-05 Jy
! Component: 150  -  total flux cleaned = 3.05177e-05 Jy
! Component: 200  -  total flux cleaned = 4.58395e-05 Jy
! Total flux subtracted in 200 components = 4.58395e-05 Jy
! Clean residual min=-0.001675 max=0.001617 Jy/beam
! Clean residual mean=0.000000 rms=0.000389 Jy/beam
! Combined flux in latest and established models = 0.304946 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 87 components and 0.304946 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071352Jy  sigma=0.912533
! Fit after  self-cal, rms=0.071352Jy  sigma=0.912531
! Inverting map 
! Your choice of large map pixels excluded 6.3% of the data.
!  The x-axis pixel size should ideally be below 0.1642 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1853 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071352Jy  sigma=0.912531
! Fit after  self-cal, rms=0.071362Jy  sigma=0.912504
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 6.3% of the data.
!  The x-axis pixel size should ideally be below 0.1642 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1853 milli-arcsec
! Estimated beam: bmin=2.359 mas, bmaj=3.094 mas, bpa=2.647 degrees
! Estimated noise=0.49365 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000470446 Jy
! Component: 100  -  total flux cleaned = 0.000483275 Jy
! Component: 150  -  total flux cleaned = 0.000483103 Jy
! Component: 200  -  total flux cleaned = 0.000493076 Jy
! Total flux subtracted in 200 components = 0.000493076 Jy
! Clean residual min=-0.001951 max=0.001963 Jy/beam
! Clean residual mean=0.000002 rms=0.000468 Jy/beam
! Combined flux in latest and established models = 0.305439 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 94 components and 0.305439 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071367Jy  sigma=0.912543
! Fit after  self-cal, rms=0.071373Jy  sigma=0.912530
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 6.3% of the data.
!  The x-axis pixel size should ideally be below 0.1642 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1853 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.61316e-05 Jy
! Component: 100  -  total flux cleaned = 7.40506e-05 Jy
! Component: 150  -  total flux cleaned = 6.63518e-05 Jy
! Component: 200  -  total flux cleaned = 6.64659e-05 Jy
! Total flux subtracted in 200 components = 6.64659e-05 Jy
! Clean residual min=-0.001949 max=0.001951 Jy/beam
! Clean residual mean=0.000002 rms=0.000467 Jy/beam
! Combined flux in latest and established models = 0.305506 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 97 components and 0.305506 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071376Jy  sigma=0.912555
! Fit after  self-cal, rms=0.071376Jy  sigma=0.912551
! Inverting map 
! Your choice of large map pixels excluded 6.3% of the data.
!  The x-axis pixel size should ideally be below 0.1642 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1853 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Your choice of large map pixels excluded 6.3% of the data.
!  The x-axis pixel size should ideally be below 0.1642 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1853 milli-arcsec
! Estimated beam: bmin=0.7236 mas, bmaj=1.414 mas, bpa=-3.863 degrees
! Estimated noise=0.415443 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7236 x 1.414 at -3.863 degrees (North through East)
! Clean map  min=-0.0014997  max=0.13389 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 6.3% of the data.
!  The x-axis pixel size should ideally be below 0.1642 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1853 milli-arcsec
! Estimated beam: bmin=0.615 mas, bmaj=1.153 mas, bpa=-1.174 degrees
! Estimated noise=0.715148 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.125694 Jy
! Component: 100  -  total flux cleaned = 0.186216 Jy
! Component: 150  -  total flux cleaned = 0.219715 Jy
! Component: 200  -  total flux cleaned = 0.240729 Jy
! Total flux subtracted in 200 components = 0.240729 Jy
! Clean residual min=-0.004878 max=0.011465 Jy/beam
! Clean residual mean=-0.000019 rms=0.001287 Jy/beam
! Combined flux in latest and established models = 0.240729 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.240729 Jy
! Inverting map and beam 
! Your choice of large map pixels excluded 6.3% of the data.
!  The x-axis pixel size should ideally be below 0.1642 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1853 milli-arcsec
! Estimated beam: bmin=0.7236 mas, bmaj=1.414 mas, bpa=-3.863 degrees
! Estimated noise=0.415443 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0195078 Jy
! Component: 100  -  total flux cleaned = 0.0322215 Jy
! Component: 150  -  total flux cleaned = 0.0410286 Jy
! Component: 200  -  total flux cleaned = 0.0473 Jy
! Total flux subtracted in 200 components = 0.0473 Jy
! Clean residual min=-0.002275 max=0.003651 Jy/beam
! Clean residual mean=-0.000011 rms=0.000610 Jy/beam
! Combined flux in latest and established models = 0.288029 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 41 components and 0.288029 Jy
! Inverting map 
! Your choice of large map pixels excluded 6.3% of the data.
!  The x-axis pixel size should ideally be below 0.1642 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1853 milli-arcsec
! Added new window around map position (-4.6, 2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00453222 Jy
! Component: 100  -  total flux cleaned = 0.00781479 Jy
! Component: 150  -  total flux cleaned = 0.0102324 Jy
! Component: 200  -  total flux cleaned = 0.0120455 Jy
! Total flux subtracted in 200 components = 0.0120455 Jy
! Clean residual min=-0.001719 max=0.001859 Jy/beam
! Clean residual mean=-0.000003 rms=0.000415 Jy/beam
! Combined flux in latest and established models = 0.300075 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 61 components and 0.300075 Jy
! Inverting map 
! Your choice of large map pixels excluded 6.3% of the data.
!  The x-axis pixel size should ideally be below 0.1642 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1853 milli-arcsec
! Added new window around map position (1, 0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00176949 Jy
! Component: 100  -  total flux cleaned = 0.00284945 Jy
! Component: 150  -  total flux cleaned = 0.00338806 Jy
! Component: 200  -  total flux cleaned = 0.00382674 Jy
! Total flux subtracted in 200 components = 0.00382674 Jy
! Clean residual min=-0.001675 max=0.001649 Jy/beam
! Clean residual mean=-0.000000 rms=0.000385 Jy/beam
! Combined flux in latest and established models = 0.303902 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 81 components and 0.303902 Jy
! Inverting map 
! Your choice of large map pixels excluded 6.3% of the data.
!  The x-axis pixel size should ideally be below 0.1642 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1853 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 6.3% of the data.
!  The x-axis pixel size should ideally be below 0.1642 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1853 milli-arcsec
! Estimated beam: bmin=2.359 mas, bmaj=3.094 mas, bpa=2.647 degrees
! Estimated noise=0.49365 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00112894 Jy
! Component: 100  -  total flux cleaned = 0.00168521 Jy
! Component: 150  -  total flux cleaned = 0.0018786 Jy
! Component: 200  -  total flux cleaned = 0.00200062 Jy
! Total flux subtracted in 200 components = 0.00200062 Jy
! Clean residual min=-0.001895 max=0.001621 Jy/beam
! Clean residual mean=0.000002 rms=0.000449 Jy/beam
! Combined flux in latest and established models = 0.305902 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.7387e-05 Jy
! Component: 100  -  total flux cleaned = 0.000113277 Jy
! Component: 150  -  total flux cleaned = 0.000137261 Jy
! Component: 200  -  total flux cleaned = 0.000169786 Jy
! Total flux subtracted in 200 components = 0.000169786 Jy
! Clean residual min=-0.001893 max=0.001635 Jy/beam
! Clean residual mean=0.000003 rms=0.000445 Jy/beam
! Combined flux in latest and established models = 0.306072 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 123 components and 0.306072 Jy
! Inverting map 
! Your choice of large map pixels excluded 6.3% of the data.
!  The x-axis pixel size should ideally be below 0.1642 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1853 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Your choice of large map pixels excluded 6.3% of the data.
!  The x-axis pixel size should ideally be below 0.1642 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1853 milli-arcsec
! Estimated beam: bmin=0.7236 mas, bmaj=1.414 mas, bpa=-3.863 degrees
! Estimated noise=0.415443 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000308418 Jy
! Component: 100  -  total flux cleaned = -0.000336967 Jy
! Component: 150  -  total flux cleaned = -0.000336976 Jy
! Component: 200  -  total flux cleaned = -0.000267433 Jy
! Total flux subtracted in 200 components = -0.000267433 Jy
! Clean residual min=-0.001690 max=0.001669 Jy/beam
! Clean residual mean=0.000001 rms=0.000374 Jy/beam
! Combined flux in latest and established models = 0.305805 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 137 components and 0.305805 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071595Jy  sigma=0.913488
! Fit after  self-cal, rms=0.071552Jy  sigma=0.913274
wmodel J0807+0432_X_map.mod
! Writing 137 model components to file: J0807+0432_X_map.mod
wobs   J0807+0432_X_uvs.fits
! Writing UV FITS file: J0807+0432_X_uvs.fits
wwins  J0807+0432_X_map.win
! wwins: Wrote 7 windows to J0807+0432_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! Your choice of large map pixels excluded 6.3% of the data.
!  The x-axis pixel size should ideally be below 0.1642 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1853 milli-arcsec
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000401082 Jy
! Component: 100  -  total flux cleaned = -0.000742851 Jy
! Component: 150  -  total flux cleaned = -0.000904964 Jy
! Component: 200  -  total flux cleaned = -0.0010617 Jy
! Component: 250  -  total flux cleaned = -0.00118868 Jy
! Component: 300  -  total flux cleaned = -0.00133787 Jy
! Component: 350  -  total flux cleaned = -0.00148456 Jy
! Component: 400  -  total flux cleaned = -0.00158115 Jy
! Component: 450  -  total flux cleaned = -0.00167592 Jy
! Component: 500  -  total flux cleaned = -0.00172267 Jy
! Component: 550  -  total flux cleaned = -0.0017456 Jy
! Component: 600  -  total flux cleaned = -0.0018136 Jy
! Component: 650  -  total flux cleaned = -0.00188084 Jy
! Component: 700  -  total flux cleaned = -0.00196913 Jy
! Component: 750  -  total flux cleaned = -0.0020127 Jy
! Component: 800  -  total flux cleaned = -0.00203425 Jy
! Component: 850  -  total flux cleaned = -0.00205539 Jy
! Component: 900  -  total flux cleaned = -0.0020554 Jy
! Component: 950  -  total flux cleaned = -0.00205537 Jy
! Component: 1000  -  total flux cleaned = -0.00205536 Jy
! Component: 1050  -  total flux cleaned = -0.00205531 Jy
! Component: 1100  -  total flux cleaned = -0.00205515 Jy
! Component: 1150  -  total flux cleaned = -0.0020353 Jy
! Component: 1200  -  total flux cleaned = -0.00209461 Jy
! Component: 1250  -  total flux cleaned = -0.00205533 Jy
! Component: 1300  -  total flux cleaned = -0.00201653 Jy
! Component: 1350  -  total flux cleaned = -0.00209357 Jy
! Component: 1400  -  total flux cleaned = -0.00197943 Jy
! Component: 1450  -  total flux cleaned = -0.00207418 Jy
! Component: 1500  -  total flux cleaned = -0.00201765 Jy
! Component: 1550  -  total flux cleaned = -0.00192438 Jy
! Component: 1600  -  total flux cleaned = -0.00183196 Jy
! Component: 1650  -  total flux cleaned = -0.00177713 Jy
! Component: 1700  -  total flux cleaned = -0.00177709 Jy
! Component: 1750  -  total flux cleaned = -0.00174082 Jy
! Component: 1800  -  total flux cleaned = -0.00165112 Jy
! Component: 1850  -  total flux cleaned = -0.00165121 Jy
! Component: 1900  -  total flux cleaned = -0.00158042 Jy
! Component: 1950  -  total flux cleaned = -0.00156254 Jy
! Component: 2000  -  total flux cleaned = -0.00147539 Jy
! Component: 2050  -  total flux cleaned = -0.00142339 Jy
! Component: 2100  -  total flux cleaned = -0.00137179 Jy
! Component: 2150  -  total flux cleaned = -0.00135457 Jy
! Component: 2200  -  total flux cleaned = -0.00125276 Jy
! Component: 2250  -  total flux cleaned = -0.00120178 Jy
! Component: 2300  -  total flux cleaned = -0.00113461 Jy
! Component: 2350  -  total flux cleaned = -0.00108458 Jy
! Component: 2400  -  total flux cleaned = -0.00103489 Jy
! Component: 2450  -  total flux cleaned = -0.00105125 Jy
! Component: 2500  -  total flux cleaned = -0.00105131 Jy
! Component: 2550  -  total flux cleaned = -0.000986192 Jy
! Component: 2600  -  total flux cleaned = -0.00095379 Jy
! Component: 2650  -  total flux cleaned = -0.000937609 Jy
! Component: 2700  -  total flux cleaned = -0.000937701 Jy
! Component: 2750  -  total flux cleaned = -0.000842081 Jy
! Component: 2800  -  total flux cleaned = -0.000858082 Jy
! Component: 2850  -  total flux cleaned = -0.000794946 Jy
! Component: 2900  -  total flux cleaned = -0.000794919 Jy
! Component: 2950  -  total flux cleaned = -0.000779337 Jy
! Component: 3000  -  total flux cleaned = -0.000779485 Jy
! Component: 3050  -  total flux cleaned = -0.000763973 Jy
! Component: 3100  -  total flux cleaned = -0.000687301 Jy
! Component: 3150  -  total flux cleaned = -0.000656669 Jy
! Component: 3200  -  total flux cleaned = -0.00061111 Jy
! Component: 3250  -  total flux cleaned = -0.000656465 Jy
! Component: 3300  -  total flux cleaned = -0.000611373 Jy
! Component: 3350  -  total flux cleaned = -0.000611468 Jy
! Component: 3400  -  total flux cleaned = -0.00065606 Jy
! Component: 3450  -  total flux cleaned = -0.000641258 Jy
! Component: 3500  -  total flux cleaned = -0.000537792 Jy
! Component: 3550  -  total flux cleaned = -0.00061116 Jy
! Component: 3600  -  total flux cleaned = -0.000596504 Jy
! Component: 3650  -  total flux cleaned = -0.000596517 Jy
! Component: 3700  -  total flux cleaned = -0.000553139 Jy
! Component: 3750  -  total flux cleaned = -0.000509856 Jy
! Component: 3800  -  total flux cleaned = -0.000524321 Jy
! Component: 3850  -  total flux cleaned = -0.000581497 Jy
! Component: 3900  -  total flux cleaned = -0.000581461 Jy
! Component: 3950  -  total flux cleaned = -0.00060983 Jy
! Component: 4000  -  total flux cleaned = -0.000595625 Jy
! Component: 4050  -  total flux cleaned = -0.000567604 Jy
! Total flux subtracted in 4096 components = -0.000609446 Jy
! Clean residual min=-0.000890 max=0.000787 Jy/beam
! Clean residual mean=-0.000000 rms=0.000233 Jy/beam
! Combined flux in latest and established models = 0.305195 Jy
keep
! Adding 324 model components to the UV plane model.
! The established model now contains 461 components and 0.305195 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv118_uvs/J0807+0432_X_map.fits
! Inverting map 
! Your choice of large map pixels excluded 6.3% of the data.
!  The x-axis pixel size should ideally be below 0.1642 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1853 milli-arcsec
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7236 x 1.414 at -3.863 degrees (North through East)
! Clean map  min=-0.0013378  max=0.13376 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv118_uvs/J0807+0432_X_map.fits
wmodel /scr/pima/rv118_uvs/J0807+0432_X_map.mod
! Writing 461 model components to file: /scr/pima/rv118_uvs/J0807+0432_X_map.mod
wobs   /scr/pima/rv118_uvs/J0807+0432_X_uvs.fits
! Writing UV FITS file: /scr/pima/rv118_uvs/J0807+0432_X_uvs.fits
wwins  /scr/pima/rv118_uvs/J0807+0432_X_map.win
! wwins: Wrote 8 windows to /scr/pima/rv118_uvs/J0807+0432_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.133763 
invert
! Inverting map 
! Your choice of large map pixels excluded 6.3% of the data.
!  The x-axis pixel size should ideally be below 0.1642 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1853 milli-arcsec
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000232133 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.520623 0.520623 1.04125 2.08249 4.16498 8.32996 16.6599 33.3199 66.6397
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.133 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  576.232 
quit
! Quitting program
! Log file /scr/pima/rv118_uvs/J0807+0432_X_dfm.log closed on Sun Dec 10 00:08:18 2017