! Started logfile: /scr/pima/rv118_uvs/J0625+4440_S_dfm.log on Sun Dec 10 00:08:31 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.23275
obs     /scr/pima/rv118_uvs/J0625+4440_S_uva.fits
! Reading UV FITS file: /scr/pima/rv118_uvs/J0625+4440_S_uva.fits
! AN table 1: 44 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.888889 visibilities/baseline/integration-bin.
! Found source: J0625+4440
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23275e+09        8e+06          1        8e+06
!  02        2  2.26275e+09        8e+06          1        8e+06
!  03        3  2.35275e+09        8e+06          1        8e+06
!  04        4  2.37275e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 5632 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0625+4440_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.043255Jy  sigma=20.029353
! Fit after  self-cal, rms=0.726324Jy  sigma=13.981639
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.836 mas, bmaj=5.83 mas, bpa=29.91 degrees
! Estimated noise=0.910879 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.218062 Jy
! Component: 100  -  total flux cleaned = 0.265613 Jy
! Total flux subtracted in 100 components = 0.265613 Jy
! Clean residual min=-0.010156 max=0.013263 Jy/beam
! Clean residual mean=0.000014 rms=0.002584 Jy/beam
! Combined flux in latest and established models = 0.265613 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.265613 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106635Jy  sigma=1.290558
! Fit after  self-cal, rms=0.106632Jy  sigma=1.290512
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.07 mas, bmaj=6.728 mas, bpa=27.31 degrees
! Estimated noise=0.507161 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00378203 Jy
! Component: 100  -  total flux cleaned = 0.00286727 Jy
! Component: 150  -  total flux cleaned = 0.00284826 Jy
! Component: 200  -  total flux cleaned = 0.00299471 Jy
! Total flux subtracted in 200 components = 0.00299471 Jy
! Clean residual min=-0.009128 max=0.006916 Jy/beam
! Clean residual mean=0.000020 rms=0.001706 Jy/beam
! Combined flux in latest and established models = 0.268608 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.268608 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105010Jy  sigma=1.273272
! Fit after  self-cal, rms=0.104994Jy  sigma=1.273240
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.07 x 6.728 at 27.31 degrees (North through East)
! Clean map  min=-0.0089852  max=0.27565 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.04     HN        0.99     KP        0.97     
!   LA        0.98     NL        0.97     OV        0.99     PT        0.99     
!   SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.06     HN        1.00     KP        0.96     
!   LA        0.97     NL        1.00     OV        1.01     PT        1.00     
!   SC        1.08     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.12     HN        1.00     KP        0.79     
!   LA        1.00     NL        1.01     OV        1.03     PT        1.02     
!   SC        0.68     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.09     HN        1.02     KP        0.98     
!   LA        1.01     NL        1.01     OV        1.02     PT        1.01     
!   SC        1.14     
! 
! 
! Fit before self-cal, rms=0.104994Jy  sigma=1.273240
! Fit after  self-cal, rms=0.082736Jy  sigma=1.116066
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.977 mas, bmaj=6.717 mas, bpa=27.1 degrees
! Estimated noise=0.505855 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000546909 Jy
! Component: 100  -  total flux cleaned = 0.000550715 Jy
! Component: 150  -  total flux cleaned = 0.000550464 Jy
! Component: 200  -  total flux cleaned = 0.000483537 Jy
! Total flux subtracted in 200 components = 0.000483537 Jy
! Clean residual min=-0.004264 max=0.004214 Jy/beam
! Clean residual mean=0.000011 rms=0.001058 Jy/beam
! Combined flux in latest and established models = 0.269092 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 18 components and 0.269091 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082481Jy  sigma=1.113576
! Fit after  self-cal, rms=0.082491Jy  sigma=1.112343
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082491Jy  sigma=1.112343
! Fit after  self-cal, rms=0.069391Jy  sigma=1.055566
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.988 mas, bmaj=6.692 mas, bpa=26.67 degrees
! Estimated noise=0.504288 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00114924 Jy
! Component: 100  -  total flux cleaned = 0.00129438 Jy
! Component: 150  -  total flux cleaned = 0.00136018 Jy
! Component: 200  -  total flux cleaned = 0.00137767 Jy
! Total flux subtracted in 200 components = 0.00137767 Jy
! Clean residual min=-0.002337 max=0.002576 Jy/beam
! Clean residual mean=0.000000 rms=0.000592 Jy/beam
! Combined flux in latest and established models = 0.270469 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 26 components and 0.270469 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069342Jy  sigma=1.055054
! Fit after  self-cal, rms=0.069371Jy  sigma=1.054598
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-56.5, 75.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00146054 Jy
! Component: 100  -  total flux cleaned = 0.0014354 Jy
! Component: 150  -  total flux cleaned = 0.00140094 Jy
! Component: 200  -  total flux cleaned = 0.00137118 Jy
! Total flux subtracted in 200 components = 0.00137118 Jy
! Clean residual min=-0.002369 max=0.002373 Jy/beam
! Clean residual mean=0.000000 rms=0.000559 Jy/beam
! Combined flux in latest and established models = 0.27184 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 45 components and 0.27184 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069264Jy  sigma=1.053396
! Fit after  self-cal, rms=0.069262Jy  sigma=1.053315
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069262Jy  sigma=1.053315
! Fit after  self-cal, rms=0.069229Jy  sigma=1.052975
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.985 mas, bmaj=6.683 mas, bpa=26.56 degrees
! Estimated noise=0.504513 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000862188 Jy
! Component: 100  -  total flux cleaned = 0.000948784 Jy
! Component: 150  -  total flux cleaned = 0.000924618 Jy
! Component: 200  -  total flux cleaned = 0.000902519 Jy
! Total flux subtracted in 200 components = 0.000902519 Jy
! Clean residual min=-0.002348 max=0.002322 Jy/beam
! Clean residual mean=-0.000000 rms=0.000546 Jy/beam
! Combined flux in latest and established models = 0.272743 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 54 components and 0.272743 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069192Jy  sigma=1.052658
! Fit after  self-cal, rms=0.069191Jy  sigma=1.052627
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000212346 Jy
! Component: 100  -  total flux cleaned = 0.000148097 Jy
! Component: 150  -  total flux cleaned = 0.000108667 Jy
! Component: 200  -  total flux cleaned = 8.96828e-05 Jy
! Total flux subtracted in 200 components = 8.96828e-05 Jy
! Clean residual min=-0.002348 max=0.002311 Jy/beam
! Clean residual mean=-0.000001 rms=0.000540 Jy/beam
! Combined flux in latest and established models = 0.272833 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 64 components and 0.272833 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069172Jy  sigma=1.052456
! Fit after  self-cal, rms=0.069172Jy  sigma=1.052443
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069172Jy  sigma=1.052443
! Fit after  self-cal, rms=0.069108Jy  sigma=1.052293
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.935 mas, bmaj=9.441 mas, bpa=-49.9 degrees
! Estimated noise=0.567341 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000571432 Jy
! Component: 100  -  total flux cleaned = 0.000607772 Jy
! Component: 150  -  total flux cleaned = 0.000690937 Jy
! Component: 200  -  total flux cleaned = 0.000706423 Jy
! Total flux subtracted in 200 components = 0.000706423 Jy
! Clean residual min=-0.002106 max=0.002090 Jy/beam
! Clean residual mean=-0.000000 rms=0.000541 Jy/beam
! Combined flux in latest and established models = 0.273539 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 75 components and 0.273539 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069099Jy  sigma=1.052184
! Fit after  self-cal, rms=0.069098Jy  sigma=1.052135
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.76113e-05 Jy
! Component: 100  -  total flux cleaned = 3.26174e-05 Jy
! Component: 150  -  total flux cleaned = 4.60378e-05 Jy
! Component: 200  -  total flux cleaned = 5.94333e-05 Jy
! Total flux subtracted in 200 components = 5.94333e-05 Jy
! Clean residual min=-0.002126 max=0.002081 Jy/beam
! Clean residual mean=-0.000000 rms=0.000535 Jy/beam
! Combined flux in latest and established models = 0.273598 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 77 components and 0.273598 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069091Jy  sigma=1.052135
! Fit after  self-cal, rms=0.069091Jy  sigma=1.052104
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.984 mas, bmaj=6.678 mas, bpa=26.5 degrees
! Estimated noise=0.504836 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.984 x 6.678 at 26.5 degrees (North through East)
! Clean map  min=-0.0022199  max=0.2753 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.794 mas, bmaj=5.79 mas, bpa=28.84 degrees
! Estimated noise=0.895026 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.214289 Jy
! Component: 100  -  total flux cleaned = 0.261023 Jy
! Component: 150  -  total flux cleaned = 0.271453 Jy
! Component: 200  -  total flux cleaned = 0.272958 Jy
! Total flux subtracted in 200 components = 0.272958 Jy
! Clean residual min=-0.004026 max=0.004102 Jy/beam
! Clean residual mean=-0.000003 rms=0.000996 Jy/beam
! Combined flux in latest and established models = 0.272958 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.272958 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.984 mas, bmaj=6.678 mas, bpa=26.5 degrees
! Estimated noise=0.504836 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00153787 Jy
! Component: 100  -  total flux cleaned = 0.00162979 Jy
! Component: 150  -  total flux cleaned = 0.0015669 Jy
! Component: 200  -  total flux cleaned = 0.00150481 Jy
! Total flux subtracted in 200 components = 0.00150481 Jy
! Clean residual min=-0.002348 max=0.002349 Jy/beam
! Clean residual mean=0.000000 rms=0.000564 Jy/beam
! Combined flux in latest and established models = 0.274462 Jy
! Adding 11 model components to the UV plane model.
! The established model now contains 16 components and 0.274462 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.935 mas, bmaj=9.441 mas, bpa=-49.9 degrees
! Estimated noise=0.567341 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000273676 Jy
! Component: 100  -  total flux cleaned = 0.00043095 Jy
! Component: 150  -  total flux cleaned = 0.000461712 Jy
! Component: 200  -  total flux cleaned = 0.000438237 Jy
! Total flux subtracted in 200 components = 0.000438237 Jy
! Clean residual min=-0.001978 max=0.002145 Jy/beam
! Clean residual mean=0.000001 rms=0.000538 Jy/beam
! Combined flux in latest and established models = 0.274901 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.27566e-05 Jy
! Component: 100  -  total flux cleaned = -6.61196e-05 Jy
! Component: 150  -  total flux cleaned = -0.000124946 Jy
! Component: 200  -  total flux cleaned = -0.000180278 Jy
! Total flux subtracted in 200 components = -0.000180278 Jy
! Clean residual min=-0.002031 max=0.002142 Jy/beam
! Clean residual mean=0.000001 rms=0.000531 Jy/beam
! Combined flux in latest and established models = 0.27472 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 37 components and 0.27472 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.984 mas, bmaj=6.678 mas, bpa=26.5 degrees
! Estimated noise=0.504836 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000175145 Jy
! Component: 100  -  total flux cleaned = -0.000284003 Jy
! Component: 150  -  total flux cleaned = -0.000377664 Jy
! Component: 200  -  total flux cleaned = -0.000377124 Jy
! Total flux subtracted in 200 components = -0.000377124 Jy
! Clean residual min=-0.002335 max=0.002345 Jy/beam
! Clean residual mean=-0.000000 rms=0.000537 Jy/beam
! Combined flux in latest and established models = 0.274343 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 49 components and 0.274343 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069138Jy  sigma=1.052780
! Fit after  self-cal, rms=0.069145Jy  sigma=1.052689
wmodel J0625+4440_S_map.mod
! Writing 49 model components to file: J0625+4440_S_map.mod
wobs   J0625+4440_S_uvs.fits
! Writing UV FITS file: J0625+4440_S_uvs.fits
wwins  J0625+4440_S_map.win
! wwins: Wrote 2 windows to J0625+4440_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000135414 Jy
! Component: 100  -  total flux cleaned = 5.90386e-05 Jy
! Component: 150  -  total flux cleaned = 0.000164997 Jy
! Component: 200  -  total flux cleaned = 0.00033483 Jy
! Component: 250  -  total flux cleaned = 0.000432999 Jy
! Component: 300  -  total flux cleaned = 0.000400538 Jy
! Component: 350  -  total flux cleaned = 0.000431326 Jy
! Component: 400  -  total flux cleaned = 0.000431233 Jy
! Component: 450  -  total flux cleaned = 0.000459782 Jy
! Component: 500  -  total flux cleaned = 0.000431112 Jy
! Component: 550  -  total flux cleaned = 0.000430979 Jy
! Component: 600  -  total flux cleaned = 0.00037765 Jy
! Component: 650  -  total flux cleaned = 0.000431082 Jy
! Component: 700  -  total flux cleaned = 0.000378348 Jy
! Component: 750  -  total flux cleaned = 0.000250953 Jy
! Component: 800  -  total flux cleaned = 0.000151166 Jy
! Component: 850  -  total flux cleaned = 5.27656e-05 Jy
! Component: 900  -  total flux cleaned = -6.82212e-05 Jy
! Component: 950  -  total flux cleaned = -0.00032988 Jy
! Component: 1000  -  total flux cleaned = -0.000493723 Jy
! Component: 1050  -  total flux cleaned = -0.000724023 Jy
! Component: 1100  -  total flux cleaned = -0.000928747 Jy
! Component: 1150  -  total flux cleaned = -0.00101857 Jy
! Component: 1200  -  total flux cleaned = -0.0012178 Jy
! Component: 1250  -  total flux cleaned = -0.00141387 Jy
! Component: 1300  -  total flux cleaned = -0.00160682 Jy
! Component: 1350  -  total flux cleaned = -0.00171323 Jy
! Component: 1400  -  total flux cleaned = -0.00194361 Jy
! Component: 1450  -  total flux cleaned = -0.00204669 Jy
! Component: 1500  -  total flux cleaned = -0.00221 Jy
! Component: 1550  -  total flux cleaned = -0.00225028 Jy
! Component: 1600  -  total flux cleaned = -0.00238992 Jy
! Component: 1650  -  total flux cleaned = -0.00250818 Jy
! Component: 1700  -  total flux cleaned = -0.00266408 Jy
! Component: 1750  -  total flux cleaned = -0.00268315 Jy
! Component: 1800  -  total flux cleaned = -0.00275938 Jy
! Component: 1850  -  total flux cleaned = -0.0028726 Jy
! Component: 1900  -  total flux cleaned = -0.00294707 Jy
! Component: 1950  -  total flux cleaned = -0.00305796 Jy
! Component: 2000  -  total flux cleaned = -0.0031494 Jy
! Component: 2050  -  total flux cleaned = -0.00325805 Jy
! Component: 2100  -  total flux cleaned = -0.00331207 Jy
! Component: 2150  -  total flux cleaned = -0.00338297 Jy
! Component: 2200  -  total flux cleaned = -0.00341831 Jy
! Component: 2250  -  total flux cleaned = -0.00354027 Jy
! Component: 2300  -  total flux cleaned = -0.0036267 Jy
! Component: 2350  -  total flux cleaned = -0.00362673 Jy
! Component: 2400  -  total flux cleaned = -0.00377978 Jy
! Component: 2450  -  total flux cleaned = -0.00383028 Jy
! Component: 2500  -  total flux cleaned = -0.00381355 Jy
! Component: 2550  -  total flux cleaned = -0.00388001 Jy
! Component: 2600  -  total flux cleaned = -0.00397897 Jy
! Component: 2650  -  total flux cleaned = -0.00401171 Jy
! Component: 2700  -  total flux cleaned = -0.00407679 Jy
! Component: 2750  -  total flux cleaned = -0.00415749 Jy
! Component: 2800  -  total flux cleaned = -0.00422157 Jy
! Component: 2850  -  total flux cleaned = -0.00426923 Jy
! Component: 2900  -  total flux cleaned = -0.00434822 Jy
! Component: 2950  -  total flux cleaned = -0.00434821 Jy
! Component: 3000  -  total flux cleaned = -0.00441056 Jy
! Component: 3050  -  total flux cleaned = -0.00445688 Jy
! Component: 3100  -  total flux cleaned = -0.00456455 Jy
! Component: 3150  -  total flux cleaned = -0.0045644 Jy
! Component: 3200  -  total flux cleaned = -0.00456453 Jy
! Component: 3250  -  total flux cleaned = -0.00468514 Jy
! Component: 3300  -  total flux cleaned = -0.00468516 Jy
! Component: 3350  -  total flux cleaned = -0.00477456 Jy
! Component: 3400  -  total flux cleaned = -0.0047893 Jy
! Component: 3450  -  total flux cleaned = -0.00487766 Jy
! Component: 3500  -  total flux cleaned = -0.00484833 Jy
! Component: 3550  -  total flux cleaned = -0.00492109 Jy
! Component: 3600  -  total flux cleaned = -0.00493549 Jy
! Component: 3650  -  total flux cleaned = -0.00494987 Jy
! Component: 3700  -  total flux cleaned = -0.00502134 Jy
! Component: 3750  -  total flux cleaned = -0.00502146 Jy
! Component: 3800  -  total flux cleaned = -0.00504973 Jy
! Component: 3850  -  total flux cleaned = -0.00504974 Jy
! Component: 3900  -  total flux cleaned = -0.00511975 Jy
! Component: 3950  -  total flux cleaned = -0.00517541 Jy
! Component: 4000  -  total flux cleaned = -0.00521692 Jy
! Component: 4050  -  total flux cleaned = -0.00523077 Jy
! Total flux subtracted in 4096 components = -0.00528556 Jy
! Clean residual min=-0.000823 max=0.000808 Jy/beam
! Clean residual mean=-0.000002 rms=0.000253 Jy/beam
! Combined flux in latest and established models = 0.269058 Jy
keep
! Adding 266 model components to the UV plane model.
! The established model now contains 315 components and 0.269058 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv118_uvs/J0625+4440_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.984 x 6.678 at 26.5 degrees (North through East)
! Clean map  min=-0.0015515  max=0.27445 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv118_uvs/J0625+4440_S_map.fits
wmodel /scr/pima/rv118_uvs/J0625+4440_S_map.mod
! Writing 315 model components to file: /scr/pima/rv118_uvs/J0625+4440_S_map.mod
wobs   /scr/pima/rv118_uvs/J0625+4440_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv118_uvs/J0625+4440_S_uvs.fits
wwins  /scr/pima/rv118_uvs/J0625+4440_S_map.win
! wwins: Wrote 3 windows to /scr/pima/rv118_uvs/J0625+4440_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.274448 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000252137 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.275611 0.275611 0.551223 1.10245 2.20489 4.40978 8.81956 17.6391 35.2782 70.5565
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.274 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1088.49 
quit
! Quitting program
! Log file /scr/pima/rv118_uvs/J0625+4440_S_dfm.log closed on Sun Dec 10 00:08:35 2017