! Started logfile: /scr/pima/rv118_uvs/J0514+5602_X_dfm.log on Sun Dec 10 00:07:51 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv118_uvs/J0514+5602_X_uva.fits ! Reading UV FITS file: /scr/pima/rv118_uvs/J0514+5602_X_uva.fits ! AN table 1: 87 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.990102 visibilities/baseline/integration-bin. ! Found source: J0514+5602 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 12404 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0514+5602_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.036464Jy sigma=20.477451 ! Fit after self-cal, rms=0.742774Jy sigma=14.663282 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.016 mas, bmaj=1.348 mas, bpa=49.97 degrees ! Estimated noise=0.617943 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.196416 Jy ! Component: 100 - total flux cleaned = 0.241821 Jy ! Total flux subtracted in 100 components = 0.241821 Jy ! Clean residual min=-0.005005 max=0.016924 Jy/beam ! Clean residual mean=-0.000017 rms=0.001203 Jy/beam ! Combined flux in latest and established models = 0.241821 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.241821 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059621Jy sigma=1.097046 ! Fit after self-cal, rms=0.059598Jy sigma=1.096575 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0172986 Jy ! Component: 100 - total flux cleaned = 0.0246734 Jy ! Total flux subtracted in 100 components = 0.0246734 Jy ! Clean residual min=-0.003191 max=0.006573 Jy/beam ! Clean residual mean=-0.000009 rms=0.000784 Jy/beam ! Combined flux in latest and established models = 0.266495 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 10 components and 0.266495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053764Jy sigma=0.965916 ! Fit after self-cal, rms=0.053732Jy sigma=0.965348 ! Inverting map ! Added new window around map position (-2.8, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00614299 Jy ! Component: 100 - total flux cleaned = 0.00965103 Jy ! Total flux subtracted in 100 components = 0.00965103 Jy ! Clean residual min=-0.002956 max=0.003419 Jy/beam ! Clean residual mean=-0.000006 rms=0.000708 Jy/beam ! Combined flux in latest and established models = 0.276146 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 18 components and 0.276146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052865Jy sigma=0.946324 ! Fit after self-cal, rms=0.052808Jy sigma=0.945264 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.349 mas, bmaj=1.671 mas, bpa=50.12 degrees ! Estimated noise=0.330776 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00386192 Jy ! Component: 100 - total flux cleaned = 0.0059641 Jy ! Component: 150 - total flux cleaned = 0.00726784 Jy ! Component: 200 - total flux cleaned = 0.00772002 Jy ! Total flux subtracted in 200 components = 0.00772002 Jy ! Clean residual min=-0.001901 max=0.002083 Jy/beam ! Clean residual mean=-0.000012 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.283866 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 38 components and 0.283866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052515Jy sigma=0.939431 ! Fit after self-cal, rms=0.052497Jy sigma=0.939082 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.349 x 1.671 at 50.12 degrees (North through East) ! Clean map min=-0.0017225 max=0.25744 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.03 KP 1.01 ! LA 1.00 NL 0.97 OV 1.02 PT 0.98 ! SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 HN 1.01 KP 1.02 ! LA 1.00 NL 0.97 OV 1.02 PT 1.00 ! SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 0.99 KP 1.02 ! LA 0.99 NL 0.97 OV 1.00 PT 0.98 ! SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.97 HN 1.01 KP 1.01 ! LA 0.99 NL 0.97 OV 1.01 PT 0.97 ! SC 0.98 ! ! ! Fit before self-cal, rms=0.052497Jy sigma=0.939082 ! Fit after self-cal, rms=0.051878Jy sigma=0.930921 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.354 mas, bmaj=1.676 mas, bpa=50.12 degrees ! Estimated noise=0.33025 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000171628 Jy ! Component: 100 - total flux cleaned = -4.56084e-05 Jy ! Component: 150 - total flux cleaned = 3.12399e-05 Jy ! Component: 200 - total flux cleaned = 6.27925e-05 Jy ! Total flux subtracted in 200 components = 6.27925e-05 Jy ! Clean residual min=-0.001540 max=0.001401 Jy/beam ! Clean residual mean=-0.000004 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.283929 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 51 components and 0.283928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051849Jy sigma=0.930520 ! Fit after self-cal, rms=0.051846Jy sigma=0.930434 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051846Jy sigma=0.930434 ! Fit after self-cal, rms=0.051721Jy sigma=0.926520 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.351 mas, bmaj=1.677 mas, bpa=50.05 degrees ! Estimated noise=0.330003 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000124698 Jy ! Component: 100 - total flux cleaned = 9.00751e-05 Jy ! Component: 150 - total flux cleaned = 0.000118031 Jy ! Component: 200 - total flux cleaned = 0.000106425 Jy ! Total flux subtracted in 200 components = 0.000106425 Jy ! Clean residual min=-0.001167 max=0.001259 Jy/beam ! Clean residual mean=-0.000002 rms=0.000297 Jy/beam ! Combined flux in latest and established models = 0.284035 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 62 components and 0.284035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051707Jy sigma=0.926296 ! Fit after self-cal, rms=0.051708Jy sigma=0.926262 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (26.8, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000660194 Jy ! Component: 100 - total flux cleaned = 0.000633137 Jy ! Component: 150 - total flux cleaned = 0.000703972 Jy ! Component: 200 - total flux cleaned = 0.000819911 Jy ! Total flux subtracted in 200 components = 0.000819911 Jy ! Clean residual min=-0.001223 max=0.001123 Jy/beam ! Clean residual mean=-0.000002 rms=0.000290 Jy/beam ! Combined flux in latest and established models = 0.284855 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 78 components and 0.284855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051675Jy sigma=0.925615 ! Fit after self-cal, rms=0.051674Jy sigma=0.925592 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051674Jy sigma=0.925592 ! Fit after self-cal, rms=0.051661Jy sigma=0.925479 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.352 mas, bmaj=1.677 mas, bpa=50.07 degrees ! Estimated noise=0.32981 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.53428e-05 Jy ! Component: 100 - total flux cleaned = 1.90553e-05 Jy ! Component: 150 - total flux cleaned = 3.51088e-05 Jy ! Component: 200 - total flux cleaned = 3.5608e-05 Jy ! Total flux subtracted in 200 components = 3.5608e-05 Jy ! Clean residual min=-0.001266 max=0.001149 Jy/beam ! Clean residual mean=-0.000002 rms=0.000288 Jy/beam ! Combined flux in latest and established models = 0.28489 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 87 components and 0.284891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051650Jy sigma=0.925278 ! Fit after self-cal, rms=0.051650Jy sigma=0.925273 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.84174e-06 Jy ! Component: 100 - total flux cleaned = 3.54038e-05 Jy ! Component: 150 - total flux cleaned = 7.26356e-05 Jy ! Component: 200 - total flux cleaned = 9.61036e-05 Jy ! Total flux subtracted in 200 components = 9.61036e-05 Jy ! Clean residual min=-0.001272 max=0.001143 Jy/beam ! Clean residual mean=-0.000002 rms=0.000287 Jy/beam ! Combined flux in latest and established models = 0.284987 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 94 components and 0.284987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051644Jy sigma=0.925167 ! Fit after self-cal, rms=0.051643Jy sigma=0.925160 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051643Jy sigma=0.925160 ! Fit after self-cal, rms=0.051626Jy sigma=0.925091 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.424 mas, bmaj=2.649 mas, bpa=81.9 degrees ! Estimated noise=0.375061 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000221506 Jy ! Component: 100 - total flux cleaned = -0.000259177 Jy ! Component: 150 - total flux cleaned = -0.000274148 Jy ! Component: 200 - total flux cleaned = -0.00027377 Jy ! Total flux subtracted in 200 components = -0.00027377 Jy ! Clean residual min=-0.001297 max=0.001052 Jy/beam ! Clean residual mean=-0.000004 rms=0.000312 Jy/beam ! Combined flux in latest and established models = 0.284713 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 106 components and 0.284713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051623Jy sigma=0.925061 ! Fit after self-cal, rms=0.051623Jy sigma=0.925054 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.78713e-06 Jy ! Component: 100 - total flux cleaned = 1.7875e-05 Jy ! Component: 150 - total flux cleaned = 1.82102e-05 Jy ! Component: 200 - total flux cleaned = 1.84355e-05 Jy ! Total flux subtracted in 200 components = 1.84355e-05 Jy ! Clean residual min=-0.001292 max=0.001057 Jy/beam ! Clean residual mean=-0.000004 rms=0.000311 Jy/beam ! Combined flux in latest and established models = 0.284731 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 112 components and 0.284731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051622Jy sigma=0.925038 ! Fit after self-cal, rms=0.051622Jy sigma=0.925036 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.352 mas, bmaj=1.678 mas, bpa=50.09 degrees ! Estimated noise=0.329635 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.352 x 1.678 at 50.09 degrees (North through East) ! Clean map min=-0.0011843 max=0.25693 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.017 mas, bmaj=1.353 mas, bpa=49.96 degrees ! Estimated noise=0.618474 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.196507 Jy ! Component: 100 - total flux cleaned = 0.241932 Jy ! Component: 150 - total flux cleaned = 0.258818 Jy ! Component: 200 - total flux cleaned = 0.267311 Jy ! Total flux subtracted in 200 components = 0.267311 Jy ! Clean residual min=-0.002871 max=0.004361 Jy/beam ! Clean residual mean=-0.000005 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.267311 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.267311 Jy ! Inverting map and beam ! Estimated beam: bmin=1.352 mas, bmaj=1.678 mas, bpa=50.09 degrees ! Estimated noise=0.329635 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0072054 Jy ! Component: 100 - total flux cleaned = 0.0110645 Jy ! Component: 150 - total flux cleaned = 0.013317 Jy ! Component: 200 - total flux cleaned = 0.0148628 Jy ! Total flux subtracted in 200 components = 0.0148628 Jy ! Clean residual min=-0.001320 max=0.001198 Jy/beam ! Clean residual mean=-0.000005 rms=0.000305 Jy/beam ! Combined flux in latest and established models = 0.282173 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 32 components and 0.282173 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.424 mas, bmaj=2.649 mas, bpa=81.9 degrees ! Estimated noise=0.375061 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119824 Jy ! Component: 100 - total flux cleaned = 0.00170333 Jy ! Component: 150 - total flux cleaned = 0.00199751 Jy ! Component: 200 - total flux cleaned = 0.00209688 Jy ! Total flux subtracted in 200 components = 0.00209688 Jy ! Clean residual min=-0.001396 max=0.001120 Jy/beam ! Clean residual mean=-0.000005 rms=0.000316 Jy/beam ! Combined flux in latest and established models = 0.28427 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.07314e-05 Jy ! Component: 100 - total flux cleaned = 0.000123917 Jy ! Component: 150 - total flux cleaned = 0.000162579 Jy ! Component: 200 - total flux cleaned = 0.000185475 Jy ! Total flux subtracted in 200 components = 0.000185475 Jy ! Clean residual min=-0.001355 max=0.001079 Jy/beam ! Clean residual mean=-0.000004 rms=0.000313 Jy/beam ! Combined flux in latest and established models = 0.284456 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 73 components and 0.284456 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.352 mas, bmaj=1.678 mas, bpa=50.09 degrees ! Estimated noise=0.329635 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.52644e-05 Jy ! Component: 100 - total flux cleaned = 0.000134382 Jy ! Component: 150 - total flux cleaned = 0.000174068 Jy ! Component: 200 - total flux cleaned = 0.000229479 Jy ! Total flux subtracted in 200 components = 0.000229479 Jy ! Clean residual min=-0.001240 max=0.001102 Jy/beam ! Clean residual mean=-0.000002 rms=0.000287 Jy/beam ! Combined flux in latest and established models = 0.284685 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 90 components and 0.284685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051640Jy sigma=0.925208 ! Fit after self-cal, rms=0.051636Jy sigma=0.925153 wmodel J0514+5602_X_map.mod ! Writing 90 model components to file: J0514+5602_X_map.mod wobs J0514+5602_X_uvs.fits ! Writing UV FITS file: J0514+5602_X_uvs.fits wwins J0514+5602_X_map.win ! wwins: Wrote 3 windows to J0514+5602_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000388684 Jy ! Component: 100 - total flux cleaned = -0.000450997 Jy ! Component: 150 - total flux cleaned = -0.000510679 Jy ! Component: 200 - total flux cleaned = -0.000530224 Jy ! Component: 250 - total flux cleaned = -0.00053034 Jy ! Component: 300 - total flux cleaned = -0.000511784 Jy ! Component: 350 - total flux cleaned = -0.000511793 Jy ! Component: 400 - total flux cleaned = -0.000547702 Jy ! Component: 450 - total flux cleaned = -0.000547543 Jy ! Component: 500 - total flux cleaned = -0.000617352 Jy ! Component: 550 - total flux cleaned = -0.000669247 Jy ! Component: 600 - total flux cleaned = -0.000720363 Jy ! Component: 650 - total flux cleaned = -0.000720396 Jy ! Component: 700 - total flux cleaned = -0.000720615 Jy ! Component: 750 - total flux cleaned = -0.00073714 Jy ! Component: 800 - total flux cleaned = -0.000802052 Jy ! Component: 850 - total flux cleaned = -0.000785756 Jy ! Component: 900 - total flux cleaned = -0.000753923 Jy ! Component: 950 - total flux cleaned = -0.000785658 Jy ! Component: 1000 - total flux cleaned = -0.000785659 Jy ! Component: 1050 - total flux cleaned = -0.000816626 Jy ! Component: 1100 - total flux cleaned = -0.000877654 Jy ! Component: 1150 - total flux cleaned = -0.000862356 Jy ! Component: 1200 - total flux cleaned = -0.000907563 Jy ! Component: 1250 - total flux cleaned = -0.000892819 Jy ! Component: 1300 - total flux cleaned = -0.000907658 Jy ! Component: 1350 - total flux cleaned = -0.000995711 Jy ! Component: 1400 - total flux cleaned = -0.000995819 Jy ! Component: 1450 - total flux cleaned = -0.00103911 Jy ! Component: 1500 - total flux cleaned = -0.00101067 Jy ! Component: 1550 - total flux cleaned = -0.00109618 Jy ! Component: 1600 - total flux cleaned = -0.00112417 Jy ! Component: 1650 - total flux cleaned = -0.00105412 Jy ! Component: 1700 - total flux cleaned = -0.001068 Jy ! Component: 1750 - total flux cleaned = -0.00110954 Jy ! Component: 1800 - total flux cleaned = -0.00109575 Jy ! Component: 1850 - total flux cleaned = -0.00109564 Jy ! Component: 1900 - total flux cleaned = -0.0010687 Jy ! Component: 1950 - total flux cleaned = -0.00112243 Jy ! Component: 2000 - total flux cleaned = -0.00106891 Jy ! Component: 2050 - total flux cleaned = -0.00122832 Jy ! Component: 2100 - total flux cleaned = -0.001149 Jy ! Component: 2150 - total flux cleaned = -0.00114909 Jy ! Component: 2200 - total flux cleaned = -0.00122743 Jy ! Component: 2250 - total flux cleaned = -0.00121454 Jy ! Component: 2300 - total flux cleaned = -0.00127904 Jy ! Component: 2350 - total flux cleaned = -0.00133034 Jy ! Component: 2400 - total flux cleaned = -0.00131759 Jy ! Component: 2450 - total flux cleaned = -0.00131755 Jy ! Component: 2500 - total flux cleaned = -0.00140582 Jy ! Component: 2550 - total flux cleaned = -0.00139335 Jy ! Component: 2600 - total flux cleaned = -0.00143081 Jy ! Component: 2650 - total flux cleaned = -0.00145567 Jy ! Component: 2700 - total flux cleaned = -0.00146798 Jy ! Component: 2750 - total flux cleaned = -0.00152942 Jy ! Component: 2800 - total flux cleaned = -0.00152934 Jy ! Component: 2850 - total flux cleaned = -0.0015536 Jy ! Component: 2900 - total flux cleaned = -0.00160177 Jy ! Component: 2950 - total flux cleaned = -0.00162578 Jy ! Component: 3000 - total flux cleaned = -0.00156608 Jy ! Component: 3050 - total flux cleaned = -0.00167309 Jy ! Component: 3100 - total flux cleaned = -0.00170864 Jy ! Component: 3150 - total flux cleaned = -0.00173214 Jy ! Component: 3200 - total flux cleaned = -0.00177902 Jy ! Component: 3250 - total flux cleaned = -0.00181409 Jy ! Component: 3300 - total flux cleaned = -0.00183731 Jy ! Component: 3350 - total flux cleaned = -0.0018025 Jy ! Component: 3400 - total flux cleaned = -0.00186013 Jy ! Component: 3450 - total flux cleaned = -0.00189457 Jy ! Component: 3500 - total flux cleaned = -0.00190592 Jy ! Component: 3550 - total flux cleaned = -0.00192873 Jy ! Component: 3600 - total flux cleaned = -0.00189478 Jy ! Component: 3650 - total flux cleaned = -0.00196244 Jy ! Component: 3700 - total flux cleaned = -0.00195122 Jy ! Component: 3750 - total flux cleaned = -0.00197367 Jy ! Component: 3800 - total flux cleaned = -0.00201823 Jy ! Component: 3850 - total flux cleaned = -0.00204039 Jy ! Component: 3900 - total flux cleaned = -0.00205155 Jy ! Component: 3950 - total flux cleaned = -0.00212859 Jy ! Component: 4000 - total flux cleaned = -0.00211762 Jy ! Component: 4050 - total flux cleaned = -0.0021176 Jy ! Total flux subtracted in 4096 components = -0.00212853 Jy ! Clean residual min=-0.000566 max=0.000691 Jy/beam ! Clean residual mean=-0.000001 rms=0.000189 Jy/beam ! Combined flux in latest and established models = 0.282557 Jy keep ! Adding 311 model components to the UV plane model. ! The established model now contains 401 components and 0.282557 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv118_uvs/J0514+5602_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.352 x 1.678 at 50.09 degrees (North through East) ! Clean map min=-0.0010679 max=0.2568 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv118_uvs/J0514+5602_X_map.fits wmodel /scr/pima/rv118_uvs/J0514+5602_X_map.mod ! Writing 401 model components to file: /scr/pima/rv118_uvs/J0514+5602_X_map.mod wobs /scr/pima/rv118_uvs/J0514+5602_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv118_uvs/J0514+5602_X_uvs.fits wwins /scr/pima/rv118_uvs/J0514+5602_X_map.win ! wwins: Wrote 4 windows to /scr/pima/rv118_uvs/J0514+5602_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.256803 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000189149 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.220965 0.220965 0.441931 0.883862 1.76772 3.53545 7.07089 14.1418 28.2836 56.5672 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.256 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1357.68 quit ! Quitting program ! Log file /scr/pima/rv118_uvs/J0514+5602_X_dfm.log closed on Sun Dec 10 00:07:55 2017