! Started logfile: /scr/pima/rv118_uvs/J0514+5602_S_dfm.log on Sun Dec 10 00:08:17 2017 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23275 obs /scr/pima/rv118_uvs/J0514+5602_S_uva.fits ! Reading UV FITS file: /scr/pima/rv118_uvs/J0514+5602_S_uva.fits ! AN table 1: 87 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.99553 visibilities/baseline/integration-bin. ! Found source: J0514+5602 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23275e+09 8e+06 1 8e+06 ! 02 2 2.26275e+09 8e+06 1 8e+06 ! 03 3 2.35275e+09 8e+06 1 8e+06 ! 04 4 2.37275e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 12472 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0514+5602_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.012375Jy sigma=19.815965 ! Fit after self-cal, rms=0.827259Jy sigma=16.242321 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.862 mas, bmaj=4.904 mas, bpa=49.9 degrees ! Estimated noise=0.624818 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.133867 Jy ! Component: 100 - total flux cleaned = 0.163769 Jy ! Total flux subtracted in 100 components = 0.163769 Jy ! Clean residual min=-0.005832 max=0.010285 Jy/beam ! Clean residual mean=0.000011 rms=0.001440 Jy/beam ! Combined flux in latest and established models = 0.163769 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.163769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084699Jy sigma=1.242084 ! Fit after self-cal, rms=0.084683Jy sigma=1.241879 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107066 Jy ! Component: 100 - total flux cleaned = 0.0155167 Jy ! Total flux subtracted in 100 components = 0.0155167 Jy ! Clean residual min=-0.005665 max=0.007714 Jy/beam ! Clean residual mean=0.000012 rms=0.001290 Jy/beam ! Combined flux in latest and established models = 0.179285 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 13 components and 0.179285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082990Jy sigma=1.208609 ! Fit after self-cal, rms=0.082967Jy sigma=1.208012 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.012 mas, bmaj=6.029 mas, bpa=48.06 degrees ! Estimated noise=0.334161 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00350416 Jy ! Component: 100 - total flux cleaned = 0.00486161 Jy ! Component: 150 - total flux cleaned = 0.00516362 Jy ! Component: 200 - total flux cleaned = 0.00537445 Jy ! Total flux subtracted in 200 components = 0.00537445 Jy ! Clean residual min=-0.004309 max=0.004321 Jy/beam ! Clean residual mean=0.000056 rms=0.001049 Jy/beam ! Combined flux in latest and established models = 0.18466 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 21 components and 0.18466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082746Jy sigma=1.205950 ! Fit after self-cal, rms=0.082738Jy sigma=1.205606 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.012 x 6.029 at 48.06 degrees (North through East) ! Clean map min=-0.0042719 max=0.17328 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.06 HN 0.99 KP 1.00 ! LA 1.00 NL 0.96 OV 0.99 PT 1.02 ! SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.08 HN 0.98 KP 0.99 ! LA 0.99 NL 0.96 OV 1.00 PT 1.03 ! SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.15 HN 1.01 KP 0.67 ! LA 1.00 NL 1.23 OV 0.98 PT 1.02 ! SC 0.80 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.06 HN 1.01 KP 1.00 ! LA 1.00 NL 0.98 OV 1.01 PT 1.03 ! SC 1.05 ! ! ! Fit before self-cal, rms=0.082738Jy sigma=1.205606 ! Fit after self-cal, rms=0.072028Jy sigma=1.140155 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.966 mas, bmaj=5.99 mas, bpa=47.61 degrees ! Estimated noise=0.334262 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00348554 Jy ! Component: 100 - total flux cleaned = 0.00501374 Jy ! Component: 150 - total flux cleaned = 0.00558378 Jy ! Component: 200 - total flux cleaned = 0.0056594 Jy ! Total flux subtracted in 200 components = 0.0056594 Jy ! Clean residual min=-0.002663 max=0.003154 Jy/beam ! Clean residual mean=0.000038 rms=0.000723 Jy/beam ! Combined flux in latest and established models = 0.190319 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 43 components and 0.190319 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071859Jy sigma=1.136251 ! Fit after self-cal, rms=0.071955Jy sigma=1.134858 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071955Jy sigma=1.134858 ! Fit after self-cal, rms=0.070061Jy sigma=1.079580 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.948 mas, bmaj=5.995 mas, bpa=48.15 degrees ! Estimated noise=0.333585 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000959026 Jy ! Component: 100 - total flux cleaned = 0.000959206 Jy ! Component: 150 - total flux cleaned = 0.000930893 Jy ! Component: 200 - total flux cleaned = 0.000879936 Jy ! Total flux subtracted in 200 components = 0.000879936 Jy ! Clean residual min=-0.001679 max=0.002013 Jy/beam ! Clean residual mean=0.000020 rms=0.000395 Jy/beam ! Combined flux in latest and established models = 0.191199 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 58 components and 0.191199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070028Jy sigma=1.078584 ! Fit after self-cal, rms=0.070124Jy sigma=1.077673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (108.5, -22.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00184236 Jy ! Component: 100 - total flux cleaned = 0.00229569 Jy ! Component: 150 - total flux cleaned = 0.00268814 Jy ! Component: 200 - total flux cleaned = 0.00284063 Jy ! Total flux subtracted in 200 components = 0.00284063 Jy ! Clean residual min=-0.001552 max=0.001426 Jy/beam ! Clean residual mean=0.000016 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.19404 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 73 components and 0.19404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070043Jy sigma=1.076259 ! Fit after self-cal, rms=0.070040Jy sigma=1.076193 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070040Jy sigma=1.076193 ! Fit after self-cal, rms=0.070020Jy sigma=1.075880 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.945 mas, bmaj=5.992 mas, bpa=47.88 degrees ! Estimated noise=0.33357 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000705974 Jy ! Component: 100 - total flux cleaned = 0.000819413 Jy ! Component: 150 - total flux cleaned = 0.000940682 Jy ! Component: 200 - total flux cleaned = 0.00100608 Jy ! Total flux subtracted in 200 components = 0.00100608 Jy ! Clean residual min=-0.001457 max=0.001332 Jy/beam ! Clean residual mean=0.000015 rms=0.000352 Jy/beam ! Combined flux in latest and established models = 0.195046 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 84 components and 0.195046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069996Jy sigma=1.075443 ! Fit after self-cal, rms=0.070001Jy sigma=1.075420 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000136745 Jy ! Component: 100 - total flux cleaned = 0.000194736 Jy ! Component: 150 - total flux cleaned = 0.000248311 Jy ! Component: 200 - total flux cleaned = 0.000281739 Jy ! Total flux subtracted in 200 components = 0.000281739 Jy ! Clean residual min=-0.001440 max=0.001345 Jy/beam ! Clean residual mean=0.000015 rms=0.000349 Jy/beam ! Combined flux in latest and established models = 0.195328 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 93 components and 0.195328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069988Jy sigma=1.075214 ! Fit after self-cal, rms=0.069989Jy sigma=1.075204 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069989Jy sigma=1.075204 ! Fit after self-cal, rms=0.069973Jy sigma=1.075033 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.526 mas, bmaj=9.286 mas, bpa=80.05 degrees ! Estimated noise=0.388115 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000597447 Jy ! Component: 100 - total flux cleaned = 0.000884864 Jy ! Component: 150 - total flux cleaned = 0.000953053 Jy ! Component: 200 - total flux cleaned = 0.00100077 Jy ! Total flux subtracted in 200 components = 0.00100077 Jy ! Clean residual min=-0.001473 max=0.001535 Jy/beam ! Clean residual mean=0.000027 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.196328 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 116 components and 0.196328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069968Jy sigma=1.074966 ! Fit after self-cal, rms=0.069968Jy sigma=1.074951 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000120716 Jy ! Component: 100 - total flux cleaned = 0.000176951 Jy ! Component: 150 - total flux cleaned = 0.000216409 Jy ! Component: 200 - total flux cleaned = 0.000242741 Jy ! Total flux subtracted in 200 components = 0.000242741 Jy ! Clean residual min=-0.001464 max=0.001518 Jy/beam ! Clean residual mean=0.000026 rms=0.000384 Jy/beam ! Combined flux in latest and established models = 0.196571 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 123 components and 0.196571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069965Jy sigma=1.074930 ! Fit after self-cal, rms=0.069965Jy sigma=1.074919 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.945 mas, bmaj=5.99 mas, bpa=47.74 degrees ! Estimated noise=0.333639 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.945 x 5.99 at 47.74 degrees (North through East) ! Clean map min=-0.0015368 max=0.17291 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.817 mas, bmaj=4.886 mas, bpa=49.87 degrees ! Estimated noise=0.618513 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.132392 Jy ! Component: 100 - total flux cleaned = 0.162868 Jy ! Component: 150 - total flux cleaned = 0.174442 Jy ! Component: 200 - total flux cleaned = 0.1805 Jy ! Total flux subtracted in 200 components = 0.1805 Jy ! Clean residual min=-0.003366 max=0.004089 Jy/beam ! Clean residual mean=0.000003 rms=0.000867 Jy/beam ! Combined flux in latest and established models = 0.1805 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.1805 Jy ! Inverting map and beam ! Estimated beam: bmin=4.945 mas, bmaj=5.99 mas, bpa=47.74 degrees ! Estimated noise=0.333639 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0048211 Jy ! Component: 100 - total flux cleaned = 0.00756194 Jy ! Component: 150 - total flux cleaned = 0.00951198 Jy ! Component: 200 - total flux cleaned = 0.0107044 Jy ! Total flux subtracted in 200 components = 0.0107044 Jy ! Clean residual min=-0.001578 max=0.001528 Jy/beam ! Clean residual mean=0.000017 rms=0.000375 Jy/beam ! Combined flux in latest and established models = 0.191204 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 30 components and 0.191204 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.526 mas, bmaj=9.286 mas, bpa=80.05 degrees ! Estimated noise=0.388115 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00161472 Jy ! Component: 100 - total flux cleaned = 0.00272384 Jy ! Component: 150 - total flux cleaned = 0.00338184 Jy ! Component: 200 - total flux cleaned = 0.00377882 Jy ! Total flux subtracted in 200 components = 0.00377882 Jy ! Clean residual min=-0.001517 max=0.001610 Jy/beam ! Clean residual mean=0.000028 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.194983 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000335092 Jy ! Component: 100 - total flux cleaned = 0.000521464 Jy ! Component: 150 - total flux cleaned = 0.000669067 Jy ! Component: 200 - total flux cleaned = 0.000801841 Jy ! Total flux subtracted in 200 components = 0.000801841 Jy ! Clean residual min=-0.001480 max=0.001551 Jy/beam ! Clean residual mean=0.000027 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.195785 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 90 components and 0.195785 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.945 mas, bmaj=5.99 mas, bpa=47.74 degrees ! Estimated noise=0.333639 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000486578 Jy ! Component: 100 - total flux cleaned = -0.000568409 Jy ! Component: 150 - total flux cleaned = -0.00052082 Jy ! Component: 200 - total flux cleaned = -0.00047769 Jy ! Total flux subtracted in 200 components = -0.00047769 Jy ! Clean residual min=-0.001404 max=0.001321 Jy/beam ! Clean residual mean=0.000014 rms=0.000347 Jy/beam ! Combined flux in latest and established models = 0.195307 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 106 components and 0.195307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069975Jy sigma=1.075158 ! Fit after self-cal, rms=0.069970Jy sigma=1.075104 wmodel J0514+5602_S_map.mod ! Writing 106 model components to file: J0514+5602_S_map.mod wobs J0514+5602_S_uvs.fits ! Writing UV FITS file: J0514+5602_S_uvs.fits wwins J0514+5602_S_map.win ! wwins: Wrote 3 windows to J0514+5602_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000243073 Jy ! Component: 100 - total flux cleaned = -0.000314789 Jy ! Component: 150 - total flux cleaned = -0.000383793 Jy ! Component: 200 - total flux cleaned = -0.000449297 Jy ! Component: 250 - total flux cleaned = -0.00049163 Jy ! Component: 300 - total flux cleaned = -0.000471273 Jy ! Component: 350 - total flux cleaned = -0.000411169 Jy ! Component: 400 - total flux cleaned = -0.000391212 Jy ! Component: 450 - total flux cleaned = -0.000255087 Jy ! Component: 500 - total flux cleaned = -0.000178967 Jy ! Component: 550 - total flux cleaned = -8.46381e-05 Jy ! Component: 600 - total flux cleaned = 8.17463e-05 Jy ! Component: 650 - total flux cleaned = 0.000100124 Jy ! Component: 700 - total flux cleaned = 0.000154805 Jy ! Component: 750 - total flux cleaned = 0.000279551 Jy ! Component: 800 - total flux cleaned = 0.000332138 Jy ! Component: 850 - total flux cleaned = 0.000401781 Jy ! Component: 900 - total flux cleaned = 0.000418973 Jy ! Component: 950 - total flux cleaned = 0.000469763 Jy ! Component: 1000 - total flux cleaned = 0.000537131 Jy ! Component: 1050 - total flux cleaned = 0.000603967 Jy ! Component: 1100 - total flux cleaned = 0.000604004 Jy ! Component: 1150 - total flux cleaned = 0.000669669 Jy ! Component: 1200 - total flux cleaned = 0.000718472 Jy ! Component: 1250 - total flux cleaned = 0.000782914 Jy ! Component: 1300 - total flux cleaned = 0.000814995 Jy ! Component: 1350 - total flux cleaned = 0.000862837 Jy ! Component: 1400 - total flux cleaned = 0.000957312 Jy ! Component: 1450 - total flux cleaned = 0.0010197 Jy ! Component: 1500 - total flux cleaned = 0.00106635 Jy ! Component: 1550 - total flux cleaned = 0.00115868 Jy ! Component: 1600 - total flux cleaned = 0.00120448 Jy ! Component: 1650 - total flux cleaned = 0.00128014 Jy ! Component: 1700 - total flux cleaned = 0.00137036 Jy ! Component: 1750 - total flux cleaned = 0.00143012 Jy ! Component: 1800 - total flux cleaned = 0.0015043 Jy ! Component: 1850 - total flux cleaned = 0.00151914 Jy ! Component: 1900 - total flux cleaned = 0.00162153 Jy ! Component: 1950 - total flux cleaned = 0.0017087 Jy ! Component: 2000 - total flux cleaned = 0.00172335 Jy ! Component: 2050 - total flux cleaned = 0.00186674 Jy ! Component: 2100 - total flux cleaned = 0.00193769 Jy ! Component: 2150 - total flux cleaned = 0.0020082 Jy ! Component: 2200 - total flux cleaned = 0.00206445 Jy ! Component: 2250 - total flux cleaned = 0.0021341 Jy ! Component: 2300 - total flux cleaned = 0.00218964 Jy ! Component: 2350 - total flux cleaned = 0.00227238 Jy ! Component: 2400 - total flux cleaned = 0.00236826 Jy ! Component: 2450 - total flux cleaned = 0.00238194 Jy ! Component: 2500 - total flux cleaned = 0.00244963 Jy ! Component: 2550 - total flux cleaned = 0.00251686 Jy ! Component: 2600 - total flux cleaned = 0.00257024 Jy ! Component: 2650 - total flux cleaned = 0.00267644 Jy ! Component: 2700 - total flux cleaned = 0.00266327 Jy ! Component: 2750 - total flux cleaned = 0.0027288 Jy ! Component: 2800 - total flux cleaned = 0.00278095 Jy ! Component: 2850 - total flux cleaned = 0.00284567 Jy ! Component: 2900 - total flux cleaned = 0.00293604 Jy ! Component: 2950 - total flux cleaned = 0.00298732 Jy ! Component: 3000 - total flux cleaned = 0.00301282 Jy ! Component: 3050 - total flux cleaned = 0.00308894 Jy ! Component: 3100 - total flux cleaned = 0.00313937 Jy ! Component: 3150 - total flux cleaned = 0.00316442 Jy ! Component: 3200 - total flux cleaned = 0.00317698 Jy ! Component: 3250 - total flux cleaned = 0.00323905 Jy ! Component: 3300 - total flux cleaned = 0.00328856 Jy ! Component: 3350 - total flux cleaned = 0.00330076 Jy ! Component: 3400 - total flux cleaned = 0.00336191 Jy ! Component: 3450 - total flux cleaned = 0.00339844 Jy ! Component: 3500 - total flux cleaned = 0.00342263 Jy ! Component: 3550 - total flux cleaned = 0.00347086 Jy ! Component: 3600 - total flux cleaned = 0.00349481 Jy ! Component: 3650 - total flux cleaned = 0.00353058 Jy ! Component: 3700 - total flux cleaned = 0.00357814 Jy ! Component: 3750 - total flux cleaned = 0.0036017 Jy ! Component: 3800 - total flux cleaned = 0.00362521 Jy ! Component: 3850 - total flux cleaned = 0.00364852 Jy ! Component: 3900 - total flux cleaned = 0.00371832 Jy ! Component: 3950 - total flux cleaned = 0.00376459 Jy ! Component: 4000 - total flux cleaned = 0.00376451 Jy ! Component: 4050 - total flux cleaned = 0.00378737 Jy ! Total flux subtracted in 4096 components = 0.00381021 Jy ! Clean residual min=-0.000639 max=0.000746 Jy/beam ! Clean residual mean=0.000007 rms=0.000218 Jy/beam ! Combined flux in latest and established models = 0.199118 Jy keep ! Adding 285 model components to the UV plane model. ! The established model now contains 391 components and 0.199117 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv118_uvs/J0514+5602_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.945 x 5.99 at 47.74 degrees (North through East) ! Clean map min=-0.0013301 max=0.17293 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv118_uvs/J0514+5602_S_map.fits wmodel /scr/pima/rv118_uvs/J0514+5602_S_map.mod ! Writing 391 model components to file: /scr/pima/rv118_uvs/J0514+5602_S_map.mod wobs /scr/pima/rv118_uvs/J0514+5602_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv118_uvs/J0514+5602_S_uvs.fits wwins /scr/pima/rv118_uvs/J0514+5602_S_map.win ! wwins: Wrote 4 windows to /scr/pima/rv118_uvs/J0514+5602_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.17293 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000217117 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.376655 0.376655 0.753311 1.50662 3.01324 6.02649 12.053 24.1059 48.2119 96.4238 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.172 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 796.484 quit ! Quitting program ! Log file /scr/pima/rv118_uvs/J0514+5602_S_dfm.log closed on Sun Dec 10 00:08:21 2017