! Started logfile: /scr/pima/rv118_uvs/J0432-3309_S_dfm.log on Sun Dec 10 00:08:03 2017 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23275 obs /scr/pima/rv118_uvs/J0432-3309_S_uva.fits ! Reading UV FITS file: /scr/pima/rv118_uvs/J0432-3309_S_uva.fits ! AN table 1: 22 integrations on 28 of 28 possible baselines. ! AN table 2: 22 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.976461 visibilities/baseline/integration-bin. ! Found source: J0432-3309 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23275e+09 8e+06 1 8e+06 ! 02 2 2.26275e+09 8e+06 1 8e+06 ! 03 3 2.35275e+09 8e+06 1 8e+06 ! 04 4 2.37275e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 4812 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0432-3309_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.003908Jy sigma=13.411503 ! Fit after self-cal, rms=0.933454Jy sigma=12.497561 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.856 mas, bmaj=14.14 mas, bpa=17.72 degrees ! Estimated noise=1.55167 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0570103 Jy ! Component: 100 - total flux cleaned = 0.069214 Jy ! Total flux subtracted in 100 components = 0.069214 Jy ! Clean residual min=-0.008878 max=0.009338 Jy/beam ! Clean residual mean=0.000015 rms=0.002571 Jy/beam ! Combined flux in latest and established models = 0.069214 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.069214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100848Jy sigma=1.125036 ! Fit after self-cal, rms=0.100114Jy sigma=1.115522 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.851 mas, bmaj=16.11 mas, bpa=15.3 degrees ! Estimated noise=0.789432 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00456469 Jy ! Component: 100 - total flux cleaned = 0.00491497 Jy ! Component: 150 - total flux cleaned = 0.0049094 Jy ! Component: 200 - total flux cleaned = 0.00482231 Jy ! Total flux subtracted in 200 components = 0.00482231 Jy ! Clean residual min=-0.004473 max=0.005629 Jy/beam ! Clean residual mean=0.000022 rms=0.001329 Jy/beam ! Combined flux in latest and established models = 0.0740363 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 17 components and 0.0740363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099754Jy sigma=1.111636 ! Fit after self-cal, rms=0.099727Jy sigma=1.111398 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.851 x 16.11 at 15.3 degrees (North through East) ! Clean map min=-0.0045258 max=0.0702 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.03 HN 1.24 KP 0.97 LA 1.12 ! NL 0.98 OV 1.03 PT 1.00 SC 1.13 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 1.13 KP 1.03 LA 0.96 ! NL 1.18 OV 0.97 PT 1.11 SC 1.14 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.98 HN 0.98 KP 1.01 LA 1.05 ! NL 0.97 OV 0.96 PT 1.08 SC 1.17 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 1.06 KP 1.01 LA 1.12 ! NL 1.02 OV 1.06 PT 1.11 SC 1.19 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.22 HN 1.22 KP 0.55 LA 1.16 ! NL 0.73 OV 0.99 PT 1.13 SC 0.58 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 1.11 KP 0.58 LA 1.07 ! NL 0.68 OV 0.98 PT 1.08 SC 0.61 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 HN 1.14 KP 1.08 LA 1.14 ! NL 0.93 OV 1.05 PT 0.99 SC 1.07 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.05 KP 1.02 LA 1.18 ! NL 0.94 OV 0.98 PT 1.17 SC 1.32 ! ! ! Fit before self-cal, rms=0.099727Jy sigma=1.111398 ! Fit after self-cal, rms=0.084382Jy sigma=1.066620 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.757 mas, bmaj=16.13 mas, bpa=15.6 degrees ! Estimated noise=0.775222 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00015748 Jy ! Component: 100 - total flux cleaned = 0.000216679 Jy ! Component: 150 - total flux cleaned = 0.000243662 Jy ! Component: 200 - total flux cleaned = 0.000244392 Jy ! Total flux subtracted in 200 components = 0.000244392 Jy ! Clean residual min=-0.002767 max=0.002873 Jy/beam ! Clean residual mean=-0.000011 rms=0.000755 Jy/beam ! Combined flux in latest and established models = 0.0742807 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 32 components and 0.0742807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084357Jy sigma=1.066433 ! Fit after self-cal, rms=0.084931Jy sigma=1.060981 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084931Jy sigma=1.060981 ! Fit after self-cal, rms=0.085030Jy sigma=1.059732 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.736 mas, bmaj=16.02 mas, bpa=15.61 degrees ! Estimated noise=0.77483 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000269856 Jy ! Component: 100 - total flux cleaned = 0.000473842 Jy ! Component: 150 - total flux cleaned = 0.000583975 Jy ! Component: 200 - total flux cleaned = 0.000698711 Jy ! Total flux subtracted in 200 components = 0.000698711 Jy ! Clean residual min=-0.002920 max=0.003067 Jy/beam ! Clean residual mean=-0.000013 rms=0.000781 Jy/beam ! Combined flux in latest and established models = 0.0749794 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 39 components and 0.0749794 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084998Jy sigma=1.059508 ! Fit after self-cal, rms=0.085120Jy sigma=1.059223 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.11748e-05 Jy ! Component: 100 - total flux cleaned = 3.94453e-05 Jy ! Component: 150 - total flux cleaned = 6.33859e-05 Jy ! Component: 200 - total flux cleaned = 8.3071e-05 Jy ! Total flux subtracted in 200 components = 8.3071e-05 Jy ! Clean residual min=-0.002935 max=0.002970 Jy/beam ! Clean residual mean=-0.000013 rms=0.000785 Jy/beam ! Combined flux in latest and established models = 0.0750625 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 47 components and 0.0750625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085102Jy sigma=1.059064 ! Fit after self-cal, rms=0.085111Jy sigma=1.058974 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085111Jy sigma=1.058974 ! Fit after self-cal, rms=0.085462Jy sigma=1.058964 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.734 mas, bmaj=15.94 mas, bpa=15.54 degrees ! Estimated noise=0.778392 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000665735 Jy ! Component: 100 - total flux cleaned = 0.000854647 Jy ! Component: 150 - total flux cleaned = 0.000962253 Jy ! Component: 200 - total flux cleaned = 0.00101743 Jy ! Total flux subtracted in 200 components = 0.00101743 Jy ! Clean residual min=-0.002915 max=0.002877 Jy/beam ! Clean residual mean=-0.000015 rms=0.000785 Jy/beam ! Combined flux in latest and established models = 0.07608 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 60 components and 0.07608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085444Jy sigma=1.058771 ! Fit after self-cal, rms=0.085489Jy sigma=1.058700 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.90489e-06 Jy ! Component: 100 - total flux cleaned = 8.48461e-05 Jy ! Component: 150 - total flux cleaned = 0.000119956 Jy ! Component: 200 - total flux cleaned = 0.000152106 Jy ! Total flux subtracted in 200 components = 0.000152106 Jy ! Clean residual min=-0.002904 max=0.002848 Jy/beam ! Clean residual mean=-0.000015 rms=0.000784 Jy/beam ! Combined flux in latest and established models = 0.0762321 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 69 components and 0.0762321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085481Jy sigma=1.058582 ! Fit after self-cal, rms=0.085486Jy sigma=1.058557 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085486Jy sigma=1.058557 ! Fit after self-cal, rms=0.085353Jy sigma=1.058532 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.453 mas, bmaj=25.59 mas, bpa=3.995 degrees ! Estimated noise=0.902212 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000555954 Jy ! Component: 100 - total flux cleaned = 0.000569779 Jy ! Component: 150 - total flux cleaned = 0.000570277 Jy ! Component: 200 - total flux cleaned = 0.000570854 Jy ! Total flux subtracted in 200 components = 0.000570854 Jy ! Clean residual min=-0.003113 max=0.003015 Jy/beam ! Clean residual mean=-0.000031 rms=0.000880 Jy/beam ! Combined flux in latest and established models = 0.0768029 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 74 components and 0.0768029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085347Jy sigma=1.058463 ! Fit after self-cal, rms=0.085354Jy sigma=1.058444 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.55108e-05 Jy ! Component: 100 - total flux cleaned = 7.80254e-05 Jy ! Component: 150 - total flux cleaned = 7.77969e-05 Jy ! Component: 200 - total flux cleaned = 8.95395e-05 Jy ! Total flux subtracted in 200 components = 8.95395e-05 Jy ! Clean residual min=-0.003107 max=0.003018 Jy/beam ! Clean residual mean=-0.000030 rms=0.000878 Jy/beam ! Combined flux in latest and established models = 0.0768925 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 75 components and 0.0768925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085350Jy sigma=1.058407 ! Fit after self-cal, rms=0.085353Jy sigma=1.058404 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.731 mas, bmaj=15.87 mas, bpa=15.48 degrees ! Estimated noise=0.780197 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.731 x 15.87 at 15.48 degrees (North through East) ! Clean map min=-0.0028174 max=0.068924 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.781 mas, bmaj=14.18 mas, bpa=17.99 degrees ! Estimated noise=1.49204 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0557167 Jy ! Component: 100 - total flux cleaned = 0.0687099 Jy ! Component: 150 - total flux cleaned = 0.0724529 Jy ! Component: 200 - total flux cleaned = 0.073155 Jy ! Total flux subtracted in 200 components = 0.073155 Jy ! Clean residual min=-0.006332 max=0.006210 Jy/beam ! Clean residual mean=-0.000006 rms=0.001658 Jy/beam ! Combined flux in latest and established models = 0.0731551 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0731551 Jy ! Inverting map and beam ! Estimated beam: bmin=3.731 mas, bmaj=15.87 mas, bpa=15.48 degrees ! Estimated noise=0.780197 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102757 Jy ! Component: 100 - total flux cleaned = 0.00166546 Jy ! Component: 150 - total flux cleaned = 0.00221663 Jy ! Component: 200 - total flux cleaned = 0.00259803 Jy ! Total flux subtracted in 200 components = 0.00259803 Jy ! Clean residual min=-0.002877 max=0.002903 Jy/beam ! Clean residual mean=-0.000017 rms=0.000812 Jy/beam ! Combined flux in latest and established models = 0.0757531 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 43 components and 0.0757531 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.453 mas, bmaj=25.59 mas, bpa=3.995 degrees ! Estimated noise=0.902212 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000839263 Jy ! Component: 100 - total flux cleaned = 0.000948104 Jy ! Component: 150 - total flux cleaned = 0.00102191 Jy ! Component: 200 - total flux cleaned = 0.00102315 Jy ! Total flux subtracted in 200 components = 0.00102315 Jy ! Clean residual min=-0.003245 max=0.003180 Jy/beam ! Clean residual mean=-0.000030 rms=0.000888 Jy/beam ! Combined flux in latest and established models = 0.0767762 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.08527e-06 Jy ! Component: 100 - total flux cleaned = 2.39041e-05 Jy ! Component: 150 - total flux cleaned = 2.39701e-05 Jy ! Component: 200 - total flux cleaned = 2.42645e-05 Jy ! Total flux subtracted in 200 components = 2.42645e-05 Jy ! Clean residual min=-0.003196 max=0.003131 Jy/beam ! Clean residual mean=-0.000030 rms=0.000884 Jy/beam ! Combined flux in latest and established models = 0.0768005 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 51 components and 0.0768005 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.731 mas, bmaj=15.87 mas, bpa=15.48 degrees ! Estimated noise=0.780197 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000106624 Jy ! Component: 100 - total flux cleaned = -7.5379e-05 Jy ! Component: 150 - total flux cleaned = -2.66991e-05 Jy ! Component: 200 - total flux cleaned = 5.93741e-05 Jy ! Total flux subtracted in 200 components = 5.93741e-05 Jy ! Clean residual min=-0.002878 max=0.002846 Jy/beam ! Clean residual mean=-0.000017 rms=0.000792 Jy/beam ! Combined flux in latest and established models = 0.0768599 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 59 components and 0.0768599 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085360Jy sigma=1.058733 ! Fit after self-cal, rms=0.085367Jy sigma=1.058703 wmodel J0432-3309_S_map.mod ! Writing 59 model components to file: J0432-3309_S_map.mod wobs J0432-3309_S_uvs.fits ! Writing UV FITS file: J0432-3309_S_uvs.fits wwins J0432-3309_S_map.win ! wwins: Wrote 1 windows to J0432-3309_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -3.22391e-06 Jy ! Component: 100 - total flux cleaned = 0.000301269 Jy ! Component: 150 - total flux cleaned = 0.000736019 Jy ! Component: 200 - total flux cleaned = 0.000966926 Jy ! Component: 250 - total flux cleaned = 0.00114588 Jy ! Component: 300 - total flux cleaned = 0.00149052 Jy ! Component: 350 - total flux cleaned = 0.00177983 Jy ! Component: 400 - total flux cleaned = 0.0018198 Jy ! Component: 450 - total flux cleaned = 0.00189926 Jy ! Component: 500 - total flux cleaned = 0.00208933 Jy ! Component: 550 - total flux cleaned = 0.00216285 Jy ! Component: 600 - total flux cleaned = 0.00234308 Jy ! Component: 650 - total flux cleaned = 0.00241338 Jy ! Component: 700 - total flux cleaned = 0.00248233 Jy ! Component: 750 - total flux cleaned = 0.00265027 Jy ! Component: 800 - total flux cleaned = 0.00281395 Jy ! Component: 850 - total flux cleaned = 0.00300631 Jy ! Component: 900 - total flux cleaned = 0.00322703 Jy ! Component: 950 - total flux cleaned = 0.0033195 Jy ! Component: 1000 - total flux cleaned = 0.00331959 Jy ! Component: 1050 - total flux cleaned = 0.00340938 Jy ! Component: 1100 - total flux cleaned = 0.00332158 Jy ! Component: 1150 - total flux cleaned = 0.00337988 Jy ! Component: 1200 - total flux cleaned = 0.00337935 Jy ! Component: 1250 - total flux cleaned = 0.00335085 Jy ! Component: 1300 - total flux cleaned = 0.00332351 Jy ! Component: 1350 - total flux cleaned = 0.003323 Jy ! Component: 1400 - total flux cleaned = 0.00329551 Jy ! Component: 1450 - total flux cleaned = 0.00324289 Jy ! Component: 1500 - total flux cleaned = 0.00334738 Jy ! Component: 1550 - total flux cleaned = 0.00332112 Jy ! Component: 1600 - total flux cleaned = 0.00337213 Jy ! Component: 1650 - total flux cleaned = 0.00339743 Jy ! Component: 1700 - total flux cleaned = 0.00342248 Jy ! Component: 1750 - total flux cleaned = 0.0034713 Jy ! Component: 1800 - total flux cleaned = 0.00351962 Jy ! Component: 1850 - total flux cleaned = 0.00363888 Jy ! Component: 1900 - total flux cleaned = 0.00370883 Jy ! Component: 1950 - total flux cleaned = 0.00370884 Jy ! Component: 2000 - total flux cleaned = 0.00389278 Jy ! Component: 2050 - total flux cleaned = 0.00391537 Jy ! Component: 2100 - total flux cleaned = 0.00400568 Jy ! Component: 2150 - total flux cleaned = 0.00413942 Jy ! Component: 2200 - total flux cleaned = 0.0042056 Jy ! Component: 2250 - total flux cleaned = 0.00437956 Jy ! Component: 2300 - total flux cleaned = 0.00440108 Jy ! Component: 2350 - total flux cleaned = 0.00442261 Jy ! Component: 2400 - total flux cleaned = 0.00446526 Jy ! Component: 2450 - total flux cleaned = 0.00454937 Jy ! Component: 2500 - total flux cleaned = 0.00454949 Jy ! Component: 2550 - total flux cleaned = 0.00459055 Jy ! Component: 2600 - total flux cleaned = 0.00463144 Jy ! Component: 2650 - total flux cleaned = 0.00467184 Jy ! Component: 2700 - total flux cleaned = 0.00467199 Jy ! Component: 2750 - total flux cleaned = 0.00471168 Jy ! Component: 2800 - total flux cleaned = 0.00481002 Jy ! Component: 2850 - total flux cleaned = 0.00490744 Jy ! Component: 2900 - total flux cleaned = 0.00490737 Jy ! Component: 2950 - total flux cleaned = 0.0049841 Jy ! Component: 3000 - total flux cleaned = 0.00498413 Jy ! Component: 3050 - total flux cleaned = 0.00498423 Jy ! Component: 3100 - total flux cleaned = 0.00502167 Jy ! Component: 3150 - total flux cleaned = 0.00511483 Jy ! Component: 3200 - total flux cleaned = 0.00507797 Jy ! Component: 3250 - total flux cleaned = 0.00511487 Jy ! Component: 3300 - total flux cleaned = 0.00511498 Jy ! Component: 3350 - total flux cleaned = 0.00524151 Jy ! Component: 3400 - total flux cleaned = 0.00522369 Jy ! Component: 3450 - total flux cleaned = 0.00536617 Jy ! Component: 3500 - total flux cleaned = 0.00538374 Jy ! Component: 3550 - total flux cleaned = 0.00540126 Jy ! Component: 3600 - total flux cleaned = 0.00545353 Jy ! Component: 3650 - total flux cleaned = 0.00545354 Jy ! Component: 3700 - total flux cleaned = 0.00557397 Jy ! Component: 3750 - total flux cleaned = 0.00555703 Jy ! Component: 3800 - total flux cleaned = 0.00557414 Jy ! Component: 3850 - total flux cleaned = 0.00565852 Jy ! Component: 3900 - total flux cleaned = 0.00567542 Jy ! Component: 3950 - total flux cleaned = 0.00570871 Jy ! Component: 4000 - total flux cleaned = 0.0057582 Jy ! Component: 4050 - total flux cleaned = 0.00580745 Jy ! Total flux subtracted in 4096 components = 0.0057746 Jy ! Clean residual min=-0.000980 max=0.000940 Jy/beam ! Clean residual mean=-0.000011 rms=0.000318 Jy/beam ! Combined flux in latest and established models = 0.0826345 Jy keep ! Adding 273 model components to the UV plane model. ! The established model now contains 332 components and 0.0826345 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv118_uvs/J0432-3309_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.731 x 15.87 at 15.48 degrees (North through East) ! Clean map min=-0.0025899 max=0.068449 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv118_uvs/J0432-3309_S_map.fits wmodel /scr/pima/rv118_uvs/J0432-3309_S_map.mod ! Writing 332 model components to file: /scr/pima/rv118_uvs/J0432-3309_S_map.mod wobs /scr/pima/rv118_uvs/J0432-3309_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv118_uvs/J0432-3309_S_uvs.fits wwins /scr/pima/rv118_uvs/J0432-3309_S_map.win ! wwins: Wrote 2 windows to /scr/pima/rv118_uvs/J0432-3309_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0684488 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000316092 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.38538 1.38538 2.77076 5.54152 11.083 22.1661 44.3322 88.6644 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.068 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 216.547 quit ! Quitting program ! Log file /scr/pima/rv118_uvs/J0432-3309_S_dfm.log closed on Sun Dec 10 00:08:07 2017