! Started logfile: /scr/pima/rv118_uvs/J0407-3303_S_dfm.log on Sun Dec 10 00:07:54 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.23275
obs     /scr/pima/rv118_uvs/J0407-3303_S_uva.fits
! Reading UV FITS file: /scr/pima/rv118_uvs/J0407-3303_S_uva.fits
! AN table 1: 44 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.888889 visibilities/baseline/integration-bin.
! Found source: J0407-3303
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23275e+09        8e+06          1        8e+06
!  02        2  2.26275e+09        8e+06          1        8e+06
!  03        3  2.35275e+09        8e+06          1        8e+06
!  04        4  2.37275e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 5632 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0407-3303_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.125169Jy  sigma=14.327577
! Fit after  self-cal, rms=0.552881Jy  sigma=6.742919
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.936 mas, bmaj=13.64 mas, bpa=18.39 degrees
! Estimated noise=1.44128 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.369422 Jy
! Component: 100  -  total flux cleaned = 0.469735 Jy
! Total flux subtracted in 100 components = 0.469735 Jy
! Clean residual min=-0.029879 max=0.047189 Jy/beam
! Clean residual mean=0.000011 rms=0.010528 Jy/beam
! Combined flux in latest and established models = 0.469735 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.469735 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.222598Jy  sigma=2.369788
! Fit after  self-cal, rms=0.222569Jy  sigma=2.369482
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.902 mas, bmaj=16.7 mas, bpa=16.93 degrees
! Estimated noise=0.769129 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0522481 Jy
! Component: 100  -  total flux cleaned = 0.0759843 Jy
! Component: 150  -  total flux cleaned = 0.0784783 Jy
! Component: 200  -  total flux cleaned = 0.0789954 Jy
! Total flux subtracted in 200 components = 0.0789954 Jy
! Clean residual min=-0.022634 max=0.025899 Jy/beam
! Clean residual mean=0.000182 rms=0.006458 Jy/beam
! Combined flux in latest and established models = 0.54873 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 43 components and 0.54873 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.210036Jy  sigma=2.201150
! Fit after  self-cal, rms=0.210018Jy  sigma=2.200772
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.902 x 16.7 at 16.93 degrees (North through East)
! Clean map  min=-0.021688  max=0.46959 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        1.19     KP        1.02     
!   LA        1.01     NL        1.09     OV        0.96     PT        1.07     
!   SC        1.17     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.05     HN        1.19     KP        1.02     
!   LA        1.01     NL        1.09     OV        0.97     PT        1.07     
!   SC        1.18     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.12     HN        1.19     KP        0.57     
!   LA        1.04     NL        0.65     OV        0.96     PT        1.09     
!   SC        0.57     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.05     HN        1.23     KP        1.06     
!   LA        1.03     NL        1.15     OV        0.94     PT        1.09     
!   SC        1.20     
! 
! 
! Fit before self-cal, rms=0.210018Jy  sigma=2.200772
! Fit after  self-cal, rms=0.094108Jy  sigma=1.100296
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.82 mas, bmaj=16.9 mas, bpa=17.44 degrees
! Estimated noise=0.760714 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00358853 Jy
! Component: 100  -  total flux cleaned = -0.00457012 Jy
! Component: 150  -  total flux cleaned = -0.00541242 Jy
! Component: 200  -  total flux cleaned = -0.00633198 Jy
! Total flux subtracted in 200 components = -0.00633198 Jy
! Clean residual min=-0.007297 max=0.007595 Jy/beam
! Clean residual mean=-0.000003 rms=0.001862 Jy/beam
! Combined flux in latest and established models = 0.542398 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 61 components and 0.542398 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.093115Jy  sigma=1.083180
! Fit after  self-cal, rms=0.093362Jy  sigma=1.080148
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.093362Jy  sigma=1.080148
! Fit after  self-cal, rms=0.092691Jy  sigma=1.051207
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.822 mas, bmaj=16.97 mas, bpa=17.4 degrees
! Estimated noise=0.759561 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00316211 Jy
! Component: 100  -  total flux cleaned = -0.00378283 Jy
! Component: 150  -  total flux cleaned = -0.00430812 Jy
! Component: 200  -  total flux cleaned = -0.00464465 Jy
! Total flux subtracted in 200 components = -0.00464465 Jy
! Clean residual min=-0.005282 max=0.005374 Jy/beam
! Clean residual mean=-0.000005 rms=0.001323 Jy/beam
! Combined flux in latest and established models = 0.537753 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 67 components and 0.537753 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092211Jy  sigma=1.045480
! Fit after  self-cal, rms=0.092186Jy  sigma=1.045214
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.6225e-05 Jy
! Component: 100  -  total flux cleaned = -0.000343379 Jy
! Component: 150  -  total flux cleaned = -0.000576971 Jy
! Component: 200  -  total flux cleaned = -0.000850988 Jy
! Total flux subtracted in 200 components = -0.000850988 Jy
! Clean residual min=-0.004912 max=0.005052 Jy/beam
! Clean residual mean=-0.000007 rms=0.001271 Jy/beam
! Combined flux in latest and established models = 0.536902 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 73 components and 0.536902 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092045Jy  sigma=1.043029
! Fit after  self-cal, rms=0.092020Jy  sigma=1.042855
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092020Jy  sigma=1.042855
! Fit after  self-cal, rms=0.093008Jy  sigma=1.035431
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.824 mas, bmaj=17.03 mas, bpa=17.4 degrees
! Estimated noise=0.759739 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00196323 Jy
! Component: 100  -  total flux cleaned = -0.00228932 Jy
! Component: 150  -  total flux cleaned = -0.00237911 Jy
! Component: 200  -  total flux cleaned = -0.00237833 Jy
! Total flux subtracted in 200 components = -0.00237833 Jy
! Clean residual min=-0.004530 max=0.003982 Jy/beam
! Clean residual mean=-0.000004 rms=0.001018 Jy/beam
! Combined flux in latest and established models = 0.534524 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 83 components and 0.534524 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092764Jy  sigma=1.032652
! Fit after  self-cal, rms=0.092762Jy  sigma=1.032546
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.72808e-05 Jy
! Component: 100  -  total flux cleaned = -0.000242612 Jy
! Component: 150  -  total flux cleaned = -0.000307089 Jy
! Component: 200  -  total flux cleaned = -0.000306939 Jy
! Total flux subtracted in 200 components = -0.000306939 Jy
! Clean residual min=-0.004525 max=0.003719 Jy/beam
! Clean residual mean=-0.000005 rms=0.000975 Jy/beam
! Combined flux in latest and established models = 0.534217 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 88 components and 0.534217 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092666Jy  sigma=1.031208
! Fit after  self-cal, rms=0.092653Jy  sigma=1.031155
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092653Jy  sigma=1.031155
! Fit after  self-cal, rms=0.093061Jy  sigma=1.030441
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.892 mas, bmaj=27.58 mas, bpa=6.522 degrees
! Estimated noise=0.852564 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00207046 Jy
! Component: 100  -  total flux cleaned = -0.00241482 Jy
! Component: 150  -  total flux cleaned = -0.00269364 Jy
! Component: 200  -  total flux cleaned = -0.00278916 Jy
! Total flux subtracted in 200 components = -0.00278916 Jy
! Clean residual min=-0.003412 max=0.002864 Jy/beam
! Clean residual mean=-0.000009 rms=0.000998 Jy/beam
! Combined flux in latest and established models = 0.531428 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 104 components and 0.531428 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092971Jy  sigma=1.029479
! Fit after  self-cal, rms=0.092966Jy  sigma=1.029426
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.07799e-05 Jy
! Component: 100  -  total flux cleaned = -0.000135618 Jy
! Component: 150  -  total flux cleaned = -0.000173186 Jy
! Component: 200  -  total flux cleaned = -0.000208411 Jy
! Total flux subtracted in 200 components = -0.000208411 Jy
! Clean residual min=-0.003438 max=0.002749 Jy/beam
! Clean residual mean=-0.000010 rms=0.000974 Jy/beam
! Combined flux in latest and established models = 0.531219 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 106 components and 0.531219 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092940Jy  sigma=1.028916
! Fit after  self-cal, rms=0.092931Jy  sigma=1.028881
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.824 mas, bmaj=17.07 mas, bpa=17.43 degrees
! Estimated noise=0.759392 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.824 x 17.07 at 17.43 degrees (North through East)
! Clean map  min=-0.0040267  max=0.47407 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.868 mas, bmaj=14.17 mas, bpa=18.85 degrees
! Estimated noise=1.44874 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.371222 Jy
! Component: 100  -  total flux cleaned = 0.46147 Jy
! Component: 150  -  total flux cleaned = 0.500951 Jy
! Component: 200  -  total flux cleaned = 0.521347 Jy
! Total flux subtracted in 200 components = 0.521347 Jy
! Clean residual min=-0.008481 max=0.010238 Jy/beam
! Clean residual mean=-0.000019 rms=0.002005 Jy/beam
! Combined flux in latest and established models = 0.521346 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.521346 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.824 mas, bmaj=17.07 mas, bpa=17.43 degrees
! Estimated noise=0.759392 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3, -13.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0104842 Jy
! Component: 100  -  total flux cleaned = 0.0119811 Jy
! Component: 150  -  total flux cleaned = 0.0123628 Jy
! Component: 200  -  total flux cleaned = 0.0125252 Jy
! Total flux subtracted in 200 components = 0.0125252 Jy
! Clean residual min=-0.004019 max=0.004611 Jy/beam
! Clean residual mean=0.000000 rms=0.000933 Jy/beam
! Combined flux in latest and established models = 0.533871 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 59 components and 0.533872 Jy
! Inverting map 
! Added new window around map position (35.5, 127.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00222831 Jy
! Component: 100  -  total flux cleaned = 0.00248526 Jy
! Component: 150  -  total flux cleaned = 0.00260448 Jy
! Component: 200  -  total flux cleaned = 0.0027128 Jy
! Total flux subtracted in 200 components = 0.0027128 Jy
! Clean residual min=-0.003704 max=0.003234 Jy/beam
! Clean residual mean=-0.000006 rms=0.000811 Jy/beam
! Combined flux in latest and established models = 0.536584 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 74 components and 0.536584 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.892 mas, bmaj=27.58 mas, bpa=6.522 degrees
! Estimated noise=0.852564 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000339283 Jy
! Component: 100  -  total flux cleaned = 0.000249815 Jy
! Component: 150  -  total flux cleaned = 0.000177094 Jy
! Component: 200  -  total flux cleaned = 0.000175911 Jy
! Total flux subtracted in 200 components = 0.000175911 Jy
! Clean residual min=-0.003307 max=0.002214 Jy/beam
! Clean residual mean=-0.000000 rms=0.000808 Jy/beam
! Combined flux in latest and established models = 0.53676 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.78308e-05 Jy
! Component: 100  -  total flux cleaned = -8.63138e-08 Jy
! Component: 150  -  total flux cleaned = 2.57083e-05 Jy
! Component: 200  -  total flux cleaned = 5.0326e-05 Jy
! Total flux subtracted in 200 components = 5.0326e-05 Jy
! Clean residual min=-0.003273 max=0.002172 Jy/beam
! Clean residual mean=0.000001 rms=0.000804 Jy/beam
! Combined flux in latest and established models = 0.536811 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 107 components and 0.536811 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.824 mas, bmaj=17.07 mas, bpa=17.43 degrees
! Estimated noise=0.759392 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000261061 Jy
! Component: 100  -  total flux cleaned = -0.000479866 Jy
! Component: 150  -  total flux cleaned = -0.000414603 Jy
! Component: 200  -  total flux cleaned = -0.000476959 Jy
! Total flux subtracted in 200 components = -0.000476959 Jy
! Clean residual min=-0.003444 max=0.002907 Jy/beam
! Clean residual mean=0.000001 rms=0.000752 Jy/beam
! Combined flux in latest and established models = 0.536334 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 122 components and 0.536334 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092591Jy  sigma=1.025328
! Fit after  self-cal, rms=0.092552Jy  sigma=1.024984
wmodel J0407-3303_S_map.mod
! Writing 122 model components to file: J0407-3303_S_map.mod
wobs   J0407-3303_S_uvs.fits
! Writing UV FITS file: J0407-3303_S_uvs.fits
wwins  J0407-3303_S_map.win
! wwins: Wrote 3 windows to J0407-3303_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00117469 Jy
! Component: 100  -  total flux cleaned = -0.00187315 Jy
! Component: 150  -  total flux cleaned = -0.00246562 Jy
! Component: 200  -  total flux cleaned = -0.00255195 Jy
! Component: 250  -  total flux cleaned = -0.00259258 Jy
! Component: 300  -  total flux cleaned = -0.0026715 Jy
! Component: 350  -  total flux cleaned = -0.00282295 Jy
! Component: 400  -  total flux cleaned = -0.00296988 Jy
! Component: 450  -  total flux cleaned = -0.00300624 Jy
! Component: 500  -  total flux cleaned = -0.00311052 Jy
! Component: 550  -  total flux cleaned = -0.00304301 Jy
! Component: 600  -  total flux cleaned = -0.00304315 Jy
! Component: 650  -  total flux cleaned = -0.00301055 Jy
! Component: 700  -  total flux cleaned = -0.00288349 Jy
! Component: 750  -  total flux cleaned = -0.00294578 Jy
! Component: 800  -  total flux cleaned = -0.00285331 Jy
! Component: 850  -  total flux cleaned = -0.00273264 Jy
! Component: 900  -  total flux cleaned = -0.00252555 Jy
! Component: 950  -  total flux cleaned = -0.00240939 Jy
! Component: 1000  -  total flux cleaned = -0.00235284 Jy
! Component: 1050  -  total flux cleaned = -0.00224073 Jy
! Component: 1100  -  total flux cleaned = -0.00213006 Jy
! Component: 1150  -  total flux cleaned = -0.00199474 Jy
! Component: 1200  -  total flux cleaned = -0.00196754 Jy
! Component: 1250  -  total flux cleaned = -0.00183607 Jy
! Component: 1300  -  total flux cleaned = -0.00186132 Jy
! Component: 1350  -  total flux cleaned = -0.00175817 Jy
! Component: 1400  -  total flux cleaned = -0.00173275 Jy
! Component: 1450  -  total flux cleaned = -0.00163255 Jy
! Component: 1500  -  total flux cleaned = -0.00160753 Jy
! Component: 1550  -  total flux cleaned = -0.00158299 Jy
! Component: 1600  -  total flux cleaned = -0.00155866 Jy
! Component: 1650  -  total flux cleaned = -0.00155851 Jy
! Component: 1700  -  total flux cleaned = -0.0016057 Jy
! Component: 1750  -  total flux cleaned = -0.00151179 Jy
! Component: 1800  -  total flux cleaned = -0.00153524 Jy
! Component: 1850  -  total flux cleaned = -0.00158092 Jy
! Component: 1900  -  total flux cleaned = -0.00160355 Jy
! Component: 1950  -  total flux cleaned = -0.0016035 Jy
! Component: 2000  -  total flux cleaned = -0.00160355 Jy
! Component: 2050  -  total flux cleaned = -0.00173668 Jy
! Component: 2100  -  total flux cleaned = -0.00173683 Jy
! Component: 2150  -  total flux cleaned = -0.0017365 Jy
! Component: 2200  -  total flux cleaned = -0.00182248 Jy
! Component: 2250  -  total flux cleaned = -0.00182223 Jy
! Component: 2300  -  total flux cleaned = -0.00192777 Jy
! Component: 2350  -  total flux cleaned = -0.00182274 Jy
! Component: 2400  -  total flux cleaned = -0.001906 Jy
! Component: 2450  -  total flux cleaned = -0.00188542 Jy
! Component: 2500  -  total flux cleaned = -0.00192666 Jy
! Component: 2550  -  total flux cleaned = -0.00192668 Jy
! Component: 2600  -  total flux cleaned = -0.00188639 Jy
! Component: 2650  -  total flux cleaned = -0.00186641 Jy
! Component: 2700  -  total flux cleaned = -0.0018265 Jy
! Component: 2750  -  total flux cleaned = -0.00182642 Jy
! Component: 2800  -  total flux cleaned = -0.0017871 Jy
! Component: 2850  -  total flux cleaned = -0.00172862 Jy
! Component: 2900  -  total flux cleaned = -0.00169007 Jy
! Component: 2950  -  total flux cleaned = -0.00169004 Jy
! Component: 3000  -  total flux cleaned = -0.00167094 Jy
! Component: 3050  -  total flux cleaned = -0.00163312 Jy
! Component: 3100  -  total flux cleaned = -0.00157688 Jy
! Component: 3150  -  total flux cleaned = -0.00159558 Jy
! Component: 3200  -  total flux cleaned = -0.00152136 Jy
! Component: 3250  -  total flux cleaned = -0.00153982 Jy
! Component: 3300  -  total flux cleaned = -0.0015216 Jy
! Component: 3350  -  total flux cleaned = -0.00144882 Jy
! Component: 3400  -  total flux cleaned = -0.0013946 Jy
! Component: 3450  -  total flux cleaned = -0.00139466 Jy
! Component: 3500  -  total flux cleaned = -0.00137684 Jy
! Component: 3550  -  total flux cleaned = -0.00125264 Jy
! Component: 3600  -  total flux cleaned = -0.00116471 Jy
! Component: 3650  -  total flux cleaned = -0.00119998 Jy
! Component: 3700  -  total flux cleaned = -0.00116508 Jy
! Component: 3750  -  total flux cleaned = -0.00113038 Jy
! Component: 3800  -  total flux cleaned = -0.00113031 Jy
! Component: 3850  -  total flux cleaned = -0.0010789 Jy
! Component: 3900  -  total flux cleaned = -0.00104478 Jy
! Component: 3950  -  total flux cleaned = -0.000959939 Jy
! Component: 4000  -  total flux cleaned = -0.000959876 Jy
! Component: 4050  -  total flux cleaned = -0.000892782 Jy
! Total flux subtracted in 4096 components = -0.00087607 Jy
! Clean residual min=-0.001055 max=0.000924 Jy/beam
! Clean residual mean=-0.000000 rms=0.000334 Jy/beam
! Combined flux in latest and established models = 0.535458 Jy
keep
! Adding 268 model components to the UV plane model.
! The established model now contains 390 components and 0.535458 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv118_uvs/J0407-3303_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.824 x 17.07 at 17.43 degrees (North through East)
! Clean map  min=-0.002133  max=0.47256 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv118_uvs/J0407-3303_S_map.fits
wmodel /scr/pima/rv118_uvs/J0407-3303_S_map.mod
! Writing 390 model components to file: /scr/pima/rv118_uvs/J0407-3303_S_map.mod
wobs   /scr/pima/rv118_uvs/J0407-3303_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv118_uvs/J0407-3303_S_uvs.fits
wwins  /scr/pima/rv118_uvs/J0407-3303_S_map.win
! wwins: Wrote 4 windows to /scr/pima/rv118_uvs/J0407-3303_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.47256 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000336262 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.213472 0.213472 0.426944 0.853889 1.70778 3.41555 6.83111 13.6622 27.3244 54.6489
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.472 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1405.33 
quit
! Quitting program
! Log file /scr/pima/rv118_uvs/J0407-3303_S_dfm.log closed on Sun Dec 10 00:07:58 2017