! Started logfile: /scr/pima/rv118_uvs/J0326-3243_X_dfm.log on Sun Dec 10 00:07:24 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv118_uvs/J0326-3243_X_uva.fits ! Reading UV FITS file: /scr/pima/rv118_uvs/J0326-3243_X_uva.fits ! AN table 1: 58 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.972906 visibilities/baseline/integration-bin. ! Found source: J0326-3243 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 6320 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0326-3243_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.001430Jy sigma=17.083246 ! Fit after self-cal, rms=0.939983Jy sigma=16.021442 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7582 mas, bmaj=4.038 mas, bpa=23.87 degrees ! Estimated noise=1.05204 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0477953 Jy ! Component: 100 - total flux cleaned = 0.0584913 Jy ! Total flux subtracted in 100 components = 0.0584913 Jy ! Clean residual min=-0.004354 max=0.005091 Jy/beam ! Clean residual mean=-0.000014 rms=0.001161 Jy/beam ! Combined flux in latest and established models = 0.0584913 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0584913 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063801Jy sigma=0.983450 ! Fit after self-cal, rms=0.062919Jy sigma=0.968207 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.104 mas, bmaj=4.933 mas, bpa=21.79 degrees ! Estimated noise=0.537324 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00591093 Jy ! Component: 100 - total flux cleaned = 0.0089193 Jy ! Component: 150 - total flux cleaned = 0.0106539 Jy ! Component: 200 - total flux cleaned = 0.0116981 Jy ! Total flux subtracted in 200 components = 0.0116981 Jy ! Clean residual min=-0.002081 max=0.002334 Jy/beam ! Clean residual mean=-0.000004 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.0701894 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 42 components and 0.0701894 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062428Jy sigma=0.957537 ! Fit after self-cal, rms=0.062461Jy sigma=0.957091 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.104 x 4.933 at 21.79 degrees (North through East) ! Clean map min=-0.0019299 max=0.060546 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.93 KP 0.98 LA 1.05 ! NL 1.09 OV 0.97 PT 1.02 SC 1.08 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.94 KP 0.99 LA 1.03 ! NL 1.00 OV 1.01 PT 1.04 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.93 KP 1.00 LA 0.93 ! NL 1.09 OV 0.98 PT 1.06 SC 0.94 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 KP 0.95 LA 0.99 ! NL 1.02 OV 0.94 PT 1.00 SC 0.86 ! ! ! Fit before self-cal, rms=0.062461Jy sigma=0.957091 ! Fit after self-cal, rms=0.061724Jy sigma=0.954338 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.103 mas, bmaj=4.963 mas, bpa=21.82 degrees ! Estimated noise=0.533942 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000421733 Jy ! Component: 100 - total flux cleaned = 0.000397577 Jy ! Component: 150 - total flux cleaned = 0.000377983 Jy ! Component: 200 - total flux cleaned = 0.000360848 Jy ! Total flux subtracted in 200 components = 0.000360848 Jy ! Clean residual min=-0.001927 max=0.001908 Jy/beam ! Clean residual mean=-0.000005 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.0705503 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 57 components and 0.0705503 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061704Jy sigma=0.954014 ! Fit after self-cal, rms=0.061743Jy sigma=0.953824 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061743Jy sigma=0.953824 ! Fit after self-cal, rms=0.062018Jy sigma=0.952785 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.101 mas, bmaj=4.95 mas, bpa=21.73 degrees ! Estimated noise=0.532728 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000252144 Jy ! Component: 100 - total flux cleaned = 0.000252264 Jy ! Component: 150 - total flux cleaned = 0.00023533 Jy ! Component: 200 - total flux cleaned = 0.000250787 Jy ! Total flux subtracted in 200 components = 0.000250787 Jy ! Clean residual min=-0.001865 max=0.001893 Jy/beam ! Clean residual mean=-0.000004 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 0.070801 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 68 components and 0.070801 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062005Jy sigma=0.952608 ! Fit after self-cal, rms=0.062030Jy sigma=0.952530 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.94901e-05 Jy ! Component: 100 - total flux cleaned = 3.9359e-06 Jy ! Component: 150 - total flux cleaned = 1.81378e-05 Jy ! Component: 200 - total flux cleaned = 1.90227e-05 Jy ! Total flux subtracted in 200 components = 1.90227e-05 Jy ! Clean residual min=-0.001873 max=0.001858 Jy/beam ! Clean residual mean=-0.000004 rms=0.000502 Jy/beam ! Combined flux in latest and established models = 0.0708201 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 69 components and 0.0708201 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062022Jy sigma=0.952417 ! Fit after self-cal, rms=0.062021Jy sigma=0.952401 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062021Jy sigma=0.952401 ! Fit after self-cal, rms=0.062767Jy sigma=0.952656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.1 mas, bmaj=4.936 mas, bpa=21.58 degrees ! Estimated noise=0.537043 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000465123 Jy ! Component: 100 - total flux cleaned = 0.00050605 Jy ! Component: 150 - total flux cleaned = 0.000521541 Jy ! Component: 200 - total flux cleaned = 0.000535522 Jy ! Total flux subtracted in 200 components = 0.000535522 Jy ! Clean residual min=-0.001891 max=0.001800 Jy/beam ! Clean residual mean=-0.000005 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 0.0713556 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 80 components and 0.0713556 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062753Jy sigma=0.952479 ! Fit after self-cal, rms=0.062756Jy sigma=0.952429 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.29567e-05 Jy ! Component: 100 - total flux cleaned = -1.23062e-05 Jy ! Component: 150 - total flux cleaned = -3.45065e-07 Jy ! Component: 200 - total flux cleaned = 1.07814e-05 Jy ! Total flux subtracted in 200 components = 1.07814e-05 Jy ! Clean residual min=-0.001897 max=0.001788 Jy/beam ! Clean residual mean=-0.000005 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.0713664 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 83 components and 0.0713664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062751Jy sigma=0.952362 ! Fit after self-cal, rms=0.062751Jy sigma=0.952354 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062751Jy sigma=0.952354 ! Fit after self-cal, rms=0.063258Jy sigma=0.952385 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.67 mas, bmaj=8.146 mas, bpa=8.881 degrees ! Estimated noise=0.598954 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000774753 Jy ! Component: 100 - total flux cleaned = 0.000773893 Jy ! Component: 150 - total flux cleaned = 0.000773493 Jy ! Component: 200 - total flux cleaned = 0.000773652 Jy ! Total flux subtracted in 200 components = 0.000773652 Jy ! Clean residual min=-0.001829 max=0.001750 Jy/beam ! Clean residual mean=-0.000008 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.07214 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 93 components and 0.07214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063250Jy sigma=0.952294 ! Fit after self-cal, rms=0.063250Jy sigma=0.952234 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.5357e-06 Jy ! Component: 100 - total flux cleaned = -1.85173e-05 Jy ! Component: 150 - total flux cleaned = -2.84874e-05 Jy ! Component: 200 - total flux cleaned = -2.85247e-05 Jy ! Total flux subtracted in 200 components = -2.85247e-05 Jy ! Clean residual min=-0.001845 max=0.001754 Jy/beam ! Clean residual mean=-0.000008 rms=0.000581 Jy/beam ! Combined flux in latest and established models = 0.0721115 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 95 components and 0.0721115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063246Jy sigma=0.952194 ! Fit after self-cal, rms=0.063245Jy sigma=0.952157 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.1 mas, bmaj=4.928 mas, bpa=21.46 degrees ! Estimated noise=0.540821 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.1 x 4.928 at 21.46 degrees (North through East) ! Clean map min=-0.0017994 max=0.061259 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.757 mas, bmaj=4.017 mas, bpa=23.53 degrees ! Estimated noise=1.05815 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0484161 Jy ! Component: 100 - total flux cleaned = 0.0593438 Jy ! Component: 150 - total flux cleaned = 0.0636772 Jy ! Component: 200 - total flux cleaned = 0.066616 Jy ! Total flux subtracted in 200 components = 0.066616 Jy ! Clean residual min=-0.003996 max=0.004278 Jy/beam ! Clean residual mean=-0.000007 rms=0.001000 Jy/beam ! Combined flux in latest and established models = 0.066616 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.066616 Jy ! Inverting map and beam ! Estimated beam: bmin=1.1 mas, bmaj=4.928 mas, bpa=21.46 degrees ! Estimated noise=0.540821 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.2, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00348911 Jy ! Component: 100 - total flux cleaned = 0.00524007 Jy ! Component: 150 - total flux cleaned = 0.00614984 Jy ! Component: 200 - total flux cleaned = 0.00652706 Jy ! Total flux subtracted in 200 components = 0.00652706 Jy ! Clean residual min=-0.001785 max=0.001876 Jy/beam ! Clean residual mean=-0.000004 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.073143 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 49 components and 0.073143 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.67 mas, bmaj=8.146 mas, bpa=8.881 degrees ! Estimated noise=0.598954 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000481843 Jy ! Component: 100 - total flux cleaned = 0.000539229 Jy ! Component: 150 - total flux cleaned = 0.000565933 Jy ! Component: 200 - total flux cleaned = 0.000524607 Jy ! Total flux subtracted in 200 components = 0.000524607 Jy ! Clean residual min=-0.001643 max=0.001872 Jy/beam ! Clean residual mean=-0.000006 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.0736676 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.64081e-05 Jy ! Component: 100 - total flux cleaned = -7.00515e-05 Jy ! Component: 150 - total flux cleaned = -0.000101313 Jy ! Component: 200 - total flux cleaned = -0.000130599 Jy ! Total flux subtracted in 200 components = -0.000130599 Jy ! Clean residual min=-0.001674 max=0.001856 Jy/beam ! Clean residual mean=-0.000007 rms=0.000541 Jy/beam ! Combined flux in latest and established models = 0.073537 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 89 components and 0.073537 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.1 mas, bmaj=4.928 mas, bpa=21.46 degrees ! Estimated noise=0.540821 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.72238e-05 Jy ! Component: 100 - total flux cleaned = 2.32447e-06 Jy ! Component: 150 - total flux cleaned = 2.30596e-06 Jy ! Component: 200 - total flux cleaned = 2.48785e-06 Jy ! Total flux subtracted in 200 components = 2.48785e-06 Jy ! Clean residual min=-0.001762 max=0.001926 Jy/beam ! Clean residual mean=-0.000004 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.0735395 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 107 components and 0.0735395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063208Jy sigma=0.951461 ! Fit after self-cal, rms=0.063181Jy sigma=0.951326 wmodel J0326-3243_X_map.mod ! Writing 107 model components to file: J0326-3243_X_map.mod wobs J0326-3243_X_uvs.fits ! Writing UV FITS file: J0326-3243_X_uvs.fits wwins J0326-3243_X_map.win ! wwins: Wrote 2 windows to J0326-3243_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000454918 Jy ! Component: 100 - total flux cleaned = 0.000747323 Jy ! Component: 150 - total flux cleaned = 0.000902436 Jy ! Component: 200 - total flux cleaned = 0.00102134 Jy ! Component: 250 - total flux cleaned = 0.0011375 Jy ! Component: 300 - total flux cleaned = 0.00130524 Jy ! Component: 350 - total flux cleaned = 0.00135925 Jy ! Component: 400 - total flux cleaned = 0.00138589 Jy ! Component: 450 - total flux cleaned = 0.00146285 Jy ! Component: 500 - total flux cleaned = 0.00146308 Jy ! Component: 550 - total flux cleaned = 0.00158585 Jy ! Component: 600 - total flux cleaned = 0.00168229 Jy ! Component: 650 - total flux cleaned = 0.00184744 Jy ! Component: 700 - total flux cleaned = 0.00196268 Jy ! Component: 750 - total flux cleaned = 0.00207548 Jy ! Component: 800 - total flux cleaned = 0.00214193 Jy ! Component: 850 - total flux cleaned = 0.00214217 Jy ! Component: 900 - total flux cleaned = 0.00225025 Jy ! Component: 950 - total flux cleaned = 0.00229272 Jy ! Component: 1000 - total flux cleaned = 0.00237635 Jy ! Component: 1050 - total flux cleaned = 0.00235571 Jy ! Component: 1100 - total flux cleaned = 0.00237609 Jy ! Component: 1150 - total flux cleaned = 0.00243631 Jy ! Component: 1200 - total flux cleaned = 0.00243583 Jy ! Component: 1250 - total flux cleaned = 0.00237739 Jy ! Component: 1300 - total flux cleaned = 0.00235822 Jy ! Component: 1350 - total flux cleaned = 0.00233891 Jy ! Component: 1400 - total flux cleaned = 0.00224461 Jy ! Component: 1450 - total flux cleaned = 0.00230079 Jy ! Component: 1500 - total flux cleaned = 0.00228269 Jy ! Component: 1550 - total flux cleaned = 0.00242916 Jy ! Component: 1600 - total flux cleaned = 0.00237459 Jy ! Component: 1650 - total flux cleaned = 0.00241058 Jy ! Component: 1700 - total flux cleaned = 0.0024462 Jy ! Component: 1750 - total flux cleaned = 0.00251637 Jy ! Component: 1800 - total flux cleaned = 0.00251641 Jy ! Component: 1850 - total flux cleaned = 0.00249887 Jy ! Component: 1900 - total flux cleaned = 0.00249903 Jy ! Component: 1950 - total flux cleaned = 0.00253282 Jy ! Component: 2000 - total flux cleaned = 0.00254954 Jy ! Component: 2050 - total flux cleaned = 0.00259925 Jy ! Component: 2100 - total flux cleaned = 0.00259923 Jy ! Component: 2150 - total flux cleaned = 0.00259917 Jy ! Component: 2200 - total flux cleaned = 0.0026801 Jy ! Component: 2250 - total flux cleaned = 0.00269621 Jy ! Component: 2300 - total flux cleaned = 0.00277588 Jy ! Component: 2350 - total flux cleaned = 0.00285486 Jy ! Component: 2400 - total flux cleaned = 0.00288628 Jy ! Component: 2450 - total flux cleaned = 0.00296421 Jy ! Component: 2500 - total flux cleaned = 0.0030105 Jy ! Component: 2550 - total flux cleaned = 0.00310241 Jy ! Component: 2600 - total flux cleaned = 0.00311765 Jy ! Component: 2650 - total flux cleaned = 0.0032082 Jy ! Component: 2700 - total flux cleaned = 0.00326815 Jy ! Component: 2750 - total flux cleaned = 0.00334263 Jy ! Component: 2800 - total flux cleaned = 0.00340172 Jy ! Component: 2850 - total flux cleaned = 0.00338716 Jy ! Component: 2900 - total flux cleaned = 0.00345984 Jy ! Component: 2950 - total flux cleaned = 0.00350313 Jy ! Component: 3000 - total flux cleaned = 0.00346007 Jy ! Component: 3050 - total flux cleaned = 0.00353154 Jy ! Component: 3100 - total flux cleaned = 0.00353136 Jy ! Component: 3150 - total flux cleaned = 0.00351718 Jy ! Component: 3200 - total flux cleaned = 0.00358753 Jy ! Component: 3250 - total flux cleaned = 0.00350377 Jy ! Component: 3300 - total flux cleaned = 0.00350386 Jy ! Component: 3350 - total flux cleaned = 0.00350386 Jy ! Component: 3400 - total flux cleaned = 0.00353122 Jy ! Component: 3450 - total flux cleaned = 0.00351751 Jy ! Component: 3500 - total flux cleaned = 0.00346326 Jy ! Component: 3550 - total flux cleaned = 0.00347685 Jy ! Component: 3600 - total flux cleaned = 0.00346337 Jy ! Component: 3650 - total flux cleaned = 0.00349018 Jy ! Component: 3700 - total flux cleaned = 0.00353018 Jy ! Component: 3750 - total flux cleaned = 0.00349047 Jy ! Component: 3800 - total flux cleaned = 0.00349046 Jy ! Component: 3850 - total flux cleaned = 0.0034905 Jy ! Component: 3900 - total flux cleaned = 0.00355582 Jy ! Component: 3950 - total flux cleaned = 0.0035557 Jy ! Component: 4000 - total flux cleaned = 0.00351682 Jy ! Component: 4050 - total flux cleaned = 0.00355552 Jy ! Total flux subtracted in 4096 components = 0.00352989 Jy ! Clean residual min=-0.000857 max=0.000799 Jy/beam ! Clean residual mean=-0.000002 rms=0.000231 Jy/beam ! Combined flux in latest and established models = 0.0770694 Jy keep ! Adding 242 model components to the UV plane model. ! The established model now contains 349 components and 0.0770694 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv118_uvs/J0326-3243_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.1 x 4.928 at 21.46 degrees (North through East) ! Clean map min=-0.001545 max=0.060733 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv118_uvs/J0326-3243_X_map.fits wmodel /scr/pima/rv118_uvs/J0326-3243_X_map.mod ! Writing 349 model components to file: /scr/pima/rv118_uvs/J0326-3243_X_map.mod wobs /scr/pima/rv118_uvs/J0326-3243_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv118_uvs/J0326-3243_X_uvs.fits wwins /scr/pima/rv118_uvs/J0326-3243_X_map.win ! wwins: Wrote 3 windows to /scr/pima/rv118_uvs/J0326-3243_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0607326 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000229521 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.13376 1.13376 2.26753 4.53505 9.07011 18.1402 36.2804 72.5608 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.06 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 264.605 quit ! Quitting program ! Log file /scr/pima/rv118_uvs/J0326-3243_X_dfm.log closed on Sun Dec 10 00:07:28 2017