! Started logfile: /scr/pima/rv118_uvs/J0326-3243_S_dfm.log on Sun Dec 10 00:07:50 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.23275
obs     /scr/pima/rv118_uvs/J0326-3243_S_uva.fits
! Reading UV FITS file: /scr/pima/rv118_uvs/J0326-3243_S_uva.fits
! AN table 1: 58 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.837438 visibilities/baseline/integration-bin.
! Found source: J0326-3243
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23275e+09        8e+06          1        8e+06
!  02        2  2.26275e+09        8e+06          1        8e+06
!  03        3  2.35275e+09        8e+06          1        8e+06
!  04        4  2.37275e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 5440 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0326-3243_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007205Jy  sigma=14.791332
! Fit after  self-cal, rms=0.947540Jy  sigma=13.929378
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.73 mas, bmaj=15.42 mas, bpa=23.77 degrees
! Estimated noise=1.37013 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0408095 Jy
! Component: 100  -  total flux cleaned = 0.0510534 Jy
! Total flux subtracted in 100 components = 0.0510534 Jy
! Clean residual min=-0.007737 max=0.008365 Jy/beam
! Clean residual mean=-0.000019 rms=0.002338 Jy/beam
! Combined flux in latest and established models = 0.0510534 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0510534 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085969Jy  sigma=1.107668
! Fit after  self-cal, rms=0.084520Jy  sigma=1.081151
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.912 mas, bmaj=19.18 mas, bpa=22.15 degrees
! Estimated noise=0.672976 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00776794 Jy
! Component: 100  -  total flux cleaned = 0.01096 Jy
! Component: 150  -  total flux cleaned = 0.0119192 Jy
! Component: 200  -  total flux cleaned = 0.0120996 Jy
! Total flux subtracted in 200 components = 0.0120996 Jy
! Clean residual min=-0.004115 max=0.005547 Jy/beam
! Clean residual mean=-0.000024 rms=0.001249 Jy/beam
! Combined flux in latest and established models = 0.063153 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 25 components and 0.063153 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083754Jy  sigma=1.071403
! Fit after  self-cal, rms=0.083737Jy  sigma=1.071106
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.912 x 19.18 at 22.15 degrees (North through East)
! Clean map  min=-0.0040721  max=0.054845 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.10     KP        1.03     LA        0.91     
!   NL        1.05     OV        1.06     PT        1.07     SC        1.26     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        1.10     KP        1.04     LA        0.98     
!   NL        1.09     OV        1.04     PT        0.99     SC        1.44     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.30     KP        0.57     LA        1.14     
!   NL        0.62     OV        0.97     PT        0.98     SC        0.58     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.10     KP        1.09     LA        1.18     
!   NL        0.99     OV        0.90     PT        0.94     SC        1.27     
! 
! 
! Fit before self-cal, rms=0.083737Jy  sigma=1.071106
! Fit after  self-cal, rms=0.073620Jy  sigma=1.038082
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.9 mas, bmaj=18.74 mas, bpa=21.85 degrees
! Estimated noise=0.664308 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000950132 Jy
! Component: 100  -  total flux cleaned = 0.000993036 Jy
! Component: 150  -  total flux cleaned = 0.000994573 Jy
! Component: 200  -  total flux cleaned = 0.000994634 Jy
! Total flux subtracted in 200 components = 0.000994634 Jy
! Clean residual min=-0.003076 max=0.003857 Jy/beam
! Clean residual mean=-0.000037 rms=0.000883 Jy/beam
! Combined flux in latest and established models = 0.0641476 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 38 components and 0.0641476 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073559Jy  sigma=1.037400
! Fit after  self-cal, rms=0.074173Jy  sigma=1.030592
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074173Jy  sigma=1.030592
! Fit after  self-cal, rms=0.075611Jy  sigma=1.026881
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.83 mas, bmaj=18.42 mas, bpa=21.78 degrees
! Estimated noise=0.665096 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00086545 Jy
! Component: 100  -  total flux cleaned = 0.000995079 Jy
! Component: 150  -  total flux cleaned = 0.00103183 Jy
! Component: 200  -  total flux cleaned = 0.00103139 Jy
! Total flux subtracted in 200 components = 0.00103139 Jy
! Clean residual min=-0.002663 max=0.003119 Jy/beam
! Clean residual mean=-0.000027 rms=0.000819 Jy/beam
! Combined flux in latest and established models = 0.065179 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 51 components and 0.065179 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075562Jy  sigma=1.026194
! Fit after  self-cal, rms=0.075791Jy  sigma=1.025245
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000315788 Jy
! Component: 100  -  total flux cleaned = -0.00028122 Jy
! Component: 150  -  total flux cleaned = -0.000253277 Jy
! Component: 200  -  total flux cleaned = -0.00020138 Jy
! Total flux subtracted in 200 components = -0.00020138 Jy
! Clean residual min=-0.002778 max=0.003073 Jy/beam
! Clean residual mean=-0.000025 rms=0.000814 Jy/beam
! Combined flux in latest and established models = 0.0649777 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 59 components and 0.0649777 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075762Jy  sigma=1.024812
! Fit after  self-cal, rms=0.075757Jy  sigma=1.024720
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075757Jy  sigma=1.024720
! Fit after  self-cal, rms=0.075885Jy  sigma=1.024321
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.792 mas, bmaj=18.28 mas, bpa=21.64 degrees
! Estimated noise=0.662752 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000613869 Jy
! Component: 100  -  total flux cleaned = 0.000647848 Jy
! Component: 150  -  total flux cleaned = 0.000650381 Jy
! Component: 200  -  total flux cleaned = 0.000625381 Jy
! Total flux subtracted in 200 components = 0.000625381 Jy
! Clean residual min=-0.002511 max=0.002905 Jy/beam
! Clean residual mean=-0.000024 rms=0.000797 Jy/beam
! Combined flux in latest and established models = 0.0656031 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 62 components and 0.0656031 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075858Jy  sigma=1.023920
! Fit after  self-cal, rms=0.075930Jy  sigma=1.023748
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.82508e-05 Jy
! Component: 100  -  total flux cleaned = -1.20552e-05 Jy
! Component: 150  -  total flux cleaned = -3.41134e-05 Jy
! Component: 200  -  total flux cleaned = -3.48201e-05 Jy
! Total flux subtracted in 200 components = -3.48201e-05 Jy
! Clean residual min=-0.002540 max=0.002915 Jy/beam
! Clean residual mean=-0.000023 rms=0.000792 Jy/beam
! Combined flux in latest and established models = 0.0655683 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 68 components and 0.0655682 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075915Jy  sigma=1.023513
! Fit after  self-cal, rms=0.075924Jy  sigma=1.023463
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075924Jy  sigma=1.023463
! Fit after  self-cal, rms=0.075878Jy  sigma=1.023343
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.815 mas, bmaj=28.33 mas, bpa=11.12 degrees
! Estimated noise=0.761391 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000282904 Jy
! Component: 100  -  total flux cleaned = 0.000304849 Jy
! Component: 150  -  total flux cleaned = 0.000336911 Jy
! Component: 200  -  total flux cleaned = 0.000350363 Jy
! Total flux subtracted in 200 components = 0.000350363 Jy
! Clean residual min=-0.002644 max=0.003784 Jy/beam
! Clean residual mean=-0.000035 rms=0.000976 Jy/beam
! Combined flux in latest and established models = 0.0659186 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 82 components and 0.0659186 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075873Jy  sigma=1.023215
! Fit after  self-cal, rms=0.075933Jy  sigma=1.022902
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.72836e-05 Jy
! Component: 100  -  total flux cleaned = -0.000112557 Jy
! Component: 150  -  total flux cleaned = -0.000112014 Jy
! Component: 200  -  total flux cleaned = -0.000125506 Jy
! Total flux subtracted in 200 components = -0.000125506 Jy
! Clean residual min=-0.002564 max=0.003797 Jy/beam
! Clean residual mean=-0.000035 rms=0.000969 Jy/beam
! Combined flux in latest and established models = 0.0657931 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 86 components and 0.0657931 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075928Jy  sigma=1.022798
! Fit after  self-cal, rms=0.075940Jy  sigma=1.022760
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.767 mas, bmaj=18.22 mas, bpa=21.52 degrees
! Estimated noise=0.661086 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.767 x 18.22 at 21.52 degrees (North through East)
! Clean map  min=-0.0028897  max=0.054659 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.649 mas, bmaj=14.72 mas, bpa=23.51 degrees
! Estimated noise=1.30027 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.040047 Jy
! Component: 100  -  total flux cleaned = 0.0519205 Jy
! Component: 150  -  total flux cleaned = 0.0591565 Jy
! Component: 200  -  total flux cleaned = 0.0631105 Jy
! Total flux subtracted in 200 components = 0.0631105 Jy
! Clean residual min=-0.005913 max=0.005593 Jy/beam
! Clean residual mean=-0.000010 rms=0.001567 Jy/beam
! Combined flux in latest and established models = 0.0631105 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.0631105 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.767 mas, bmaj=18.22 mas, bpa=21.52 degrees
! Estimated noise=0.661086 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00247501 Jy
! Component: 100  -  total flux cleaned = 0.00265508 Jy
! Component: 150  -  total flux cleaned = 0.00284694 Jy
! Component: 200  -  total flux cleaned = 0.00280229 Jy
! Total flux subtracted in 200 components = 0.00280229 Jy
! Clean residual min=-0.002765 max=0.003024 Jy/beam
! Clean residual mean=-0.000022 rms=0.000812 Jy/beam
! Combined flux in latest and established models = 0.0659128 Jy
! Adding 13 model components to the UV plane model.
! The established model now contains 29 components and 0.0659128 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.815 mas, bmaj=28.33 mas, bpa=11.12 degrees
! Estimated noise=0.761391 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00012943 Jy
! Component: 100  -  total flux cleaned = -0.000168376 Jy
! Component: 150  -  total flux cleaned = -0.000169313 Jy
! Component: 200  -  total flux cleaned = -0.000185568 Jy
! Total flux subtracted in 200 components = -0.000185568 Jy
! Clean residual min=-0.002597 max=0.003802 Jy/beam
! Clean residual mean=-0.000035 rms=0.000973 Jy/beam
! Combined flux in latest and established models = 0.0657273 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.51277e-05 Jy
! Component: 100  -  total flux cleaned = -2.93283e-05 Jy
! Component: 150  -  total flux cleaned = -2.97109e-05 Jy
! Component: 200  -  total flux cleaned = -2.99492e-05 Jy
! Total flux subtracted in 200 components = -2.99492e-05 Jy
! Clean residual min=-0.002587 max=0.003781 Jy/beam
! Clean residual mean=-0.000035 rms=0.000970 Jy/beam
! Combined flux in latest and established models = 0.0656973 Jy
! Adding 15 model components to the UV plane model.
! The established model now contains 39 components and 0.0656973 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.767 mas, bmaj=18.22 mas, bpa=21.52 degrees
! Estimated noise=0.661086 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.20281e-05 Jy
! Component: 100  -  total flux cleaned = -5.29607e-05 Jy
! Component: 150  -  total flux cleaned = -5.33002e-05 Jy
! Component: 200  -  total flux cleaned = -2.7928e-05 Jy
! Total flux subtracted in 200 components = -2.7928e-05 Jy
! Clean residual min=-0.002537 max=0.002884 Jy/beam
! Clean residual mean=-0.000022 rms=0.000794 Jy/beam
! Combined flux in latest and established models = 0.0656694 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 51 components and 0.0656694 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075947Jy  sigma=1.023020
! Fit after  self-cal, rms=0.075940Jy  sigma=1.022889
wmodel J0326-3243_S_map.mod
! Writing 51 model components to file: J0326-3243_S_map.mod
wobs   J0326-3243_S_uvs.fits
! Writing UV FITS file: J0326-3243_S_uvs.fits
wwins  J0326-3243_S_map.win
! wwins: Wrote 1 windows to J0326-3243_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000971615 Jy
! Component: 100  -  total flux cleaned = 0.00147601 Jy
! Component: 150  -  total flux cleaned = 0.00173842 Jy
! Component: 200  -  total flux cleaned = 0.0019905 Jy
! Component: 250  -  total flux cleaned = 0.00219285 Jy
! Component: 300  -  total flux cleaned = 0.00238734 Jy
! Component: 350  -  total flux cleaned = 0.00253738 Jy
! Component: 400  -  total flux cleaned = 0.00275478 Jy
! Component: 450  -  total flux cleaned = 0.00289512 Jy
! Component: 500  -  total flux cleaned = 0.00320108 Jy
! Component: 550  -  total flux cleaned = 0.00339868 Jy
! Component: 600  -  total flux cleaned = 0.00362338 Jy
! Component: 650  -  total flux cleaned = 0.00381113 Jy
! Component: 700  -  total flux cleaned = 0.00408527 Jy
! Component: 750  -  total flux cleaned = 0.00417407 Jy
! Component: 800  -  total flux cleaned = 0.00417453 Jy
! Component: 850  -  total flux cleaned = 0.00437366 Jy
! Component: 900  -  total flux cleaned = 0.00453973 Jy
! Component: 950  -  total flux cleaned = 0.00462089 Jy
! Component: 1000  -  total flux cleaned = 0.00478001 Jy
! Component: 1050  -  total flux cleaned = 0.00478003 Jy
! Component: 1100  -  total flux cleaned = 0.00485677 Jy
! Component: 1150  -  total flux cleaned = 0.00485697 Jy
! Component: 1200  -  total flux cleaned = 0.00498013 Jy
! Component: 1250  -  total flux cleaned = 0.00500411 Jy
! Component: 1300  -  total flux cleaned = 0.00500431 Jy
! Component: 1350  -  total flux cleaned = 0.00505187 Jy
! Component: 1400  -  total flux cleaned = 0.00507567 Jy
! Component: 1450  -  total flux cleaned = 0.00514402 Jy
! Component: 1500  -  total flux cleaned = 0.00505403 Jy
! Component: 1550  -  total flux cleaned = 0.00500987 Jy
! Component: 1600  -  total flux cleaned = 0.00490096 Jy
! Component: 1650  -  total flux cleaned = 0.00494431 Jy
! Component: 1700  -  total flux cleaned = 0.00490168 Jy
! Component: 1750  -  total flux cleaned = 0.00488098 Jy
! Component: 1800  -  total flux cleaned = 0.00492268 Jy
! Component: 1850  -  total flux cleaned = 0.00490241 Jy
! Component: 1900  -  total flux cleaned = 0.00490246 Jy
! Component: 1950  -  total flux cleaned = 0.00492252 Jy
! Component: 2000  -  total flux cleaned = 0.00490299 Jy
! Component: 2050  -  total flux cleaned = 0.00501986 Jy
! Component: 2100  -  total flux cleaned = 0.00500045 Jy
! Component: 2150  -  total flux cleaned = 0.00505801 Jy
! Component: 2200  -  total flux cleaned = 0.00515296 Jy
! Component: 2250  -  total flux cleaned = 0.00520902 Jy
! Component: 2300  -  total flux cleaned = 0.00511608 Jy
! Component: 2350  -  total flux cleaned = 0.00515299 Jy
! Component: 2400  -  total flux cleaned = 0.00511646 Jy
! Component: 2450  -  total flux cleaned = 0.0051891 Jy
! Component: 2500  -  total flux cleaned = 0.00509924 Jy
! Component: 2550  -  total flux cleaned = 0.00509917 Jy
! Component: 2600  -  total flux cleaned = 0.00504609 Jy
! Component: 2650  -  total flux cleaned = 0.0050462 Jy
! Component: 2700  -  total flux cleaned = 0.00499385 Jy
! Component: 2750  -  total flux cleaned = 0.00501123 Jy
! Component: 2800  -  total flux cleaned = 0.00504564 Jy
! Component: 2850  -  total flux cleaned = 0.00501128 Jy
! Component: 2900  -  total flux cleaned = 0.00501112 Jy
! Component: 2950  -  total flux cleaned = 0.00494347 Jy
! Component: 3000  -  total flux cleaned = 0.00496037 Jy
! Component: 3050  -  total flux cleaned = 0.00499374 Jy
! Component: 3100  -  total flux cleaned = 0.00491065 Jy
! Component: 3150  -  total flux cleaned = 0.00491081 Jy
! Component: 3200  -  total flux cleaned = 0.00489451 Jy
! Component: 3250  -  total flux cleaned = 0.00486182 Jy
! Component: 3300  -  total flux cleaned = 0.00487794 Jy
! Component: 3350  -  total flux cleaned = 0.00486182 Jy
! Component: 3400  -  total flux cleaned = 0.0048137 Jy
! Component: 3450  -  total flux cleaned = 0.00486168 Jy
! Component: 3500  -  total flux cleaned = 0.00479811 Jy
! Component: 3550  -  total flux cleaned = 0.00478224 Jy
! Component: 3600  -  total flux cleaned = 0.00473515 Jy
! Component: 3650  -  total flux cleaned = 0.00473519 Jy
! Component: 3700  -  total flux cleaned = 0.00468859 Jy
! Component: 3750  -  total flux cleaned = 0.004704 Jy
! Component: 3800  -  total flux cleaned = 0.00464242 Jy
! Component: 3850  -  total flux cleaned = 0.00462709 Jy
! Component: 3900  -  total flux cleaned = 0.00456614 Jy
! Component: 3950  -  total flux cleaned = 0.0045663 Jy
! Component: 4000  -  total flux cleaned = 0.00450602 Jy
! Component: 4050  -  total flux cleaned = 0.00450598 Jy
! Total flux subtracted in 4096 components = 0.00447621 Jy
! Clean residual min=-0.001046 max=0.000906 Jy/beam
! Clean residual mean=-0.000009 rms=0.000284 Jy/beam
! Combined flux in latest and established models = 0.0701456 Jy
keep
! Adding 282 model components to the UV plane model.
! The established model now contains 333 components and 0.0701456 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv118_uvs/J0326-3243_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.767 x 18.22 at 21.52 degrees (North through East)
! Clean map  min=-0.0019981  max=0.054446 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv118_uvs/J0326-3243_S_map.fits
wmodel /scr/pima/rv118_uvs/J0326-3243_S_map.mod
! Writing 333 model components to file: /scr/pima/rv118_uvs/J0326-3243_S_map.mod
wobs   /scr/pima/rv118_uvs/J0326-3243_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv118_uvs/J0326-3243_S_uvs.fits
wwins  /scr/pima/rv118_uvs/J0326-3243_S_map.win
! wwins: Wrote 2 windows to /scr/pima/rv118_uvs/J0326-3243_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0544462 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000277844 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.53093 1.53093 3.06186 6.12371 12.2474 24.4949 48.9897 97.9794
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.054 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  195.959 
quit
! Quitting program
! Log file /scr/pima/rv118_uvs/J0326-3243_S_dfm.log closed on Sun Dec 10 00:07:54 2017