! Started logfile: /scr/pima/rv118_uvs/J0317-4414_X_dfm.log on Sun Dec 10 00:07:20 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv118_uvs/J0317-4414_X_uva.fits ! Reading UV FITS file: /scr/pima/rv118_uvs/J0317-4414_X_uva.fits ! AN table 1: 58 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.974713 visibilities/baseline/integration-bin. ! Found source: J0317-4414 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 3392 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0317-4414_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.003270Jy sigma=15.652639 ! Fit after self-cal, rms=0.919333Jy sigma=14.331131 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6653 mas, bmaj=7.602 mas, bpa=18.56 degrees ! Estimated noise=1.66387 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0565937 Jy ! Component: 100 - total flux cleaned = 0.0721281 Jy ! Total flux subtracted in 100 components = 0.0721281 Jy ! Clean residual min=-0.006649 max=0.007593 Jy/beam ! Clean residual mean=0.000019 rms=0.001718 Jy/beam ! Combined flux in latest and established models = 0.0721281 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0721281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062605Jy sigma=0.926960 ! Fit after self-cal, rms=0.062449Jy sigma=0.924831 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9872 mas, bmaj=8.902 mas, bpa=17.75 degrees ! Estimated noise=0.795255 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0137799 Jy ! Component: 100 - total flux cleaned = 0.0185357 Jy ! Component: 150 - total flux cleaned = 0.0205788 Jy ! Component: 200 - total flux cleaned = 0.0217548 Jy ! Total flux subtracted in 200 components = 0.0217548 Jy ! Clean residual min=-0.002807 max=0.002734 Jy/beam ! Clean residual mean=-0.000016 rms=0.000747 Jy/beam ! Combined flux in latest and established models = 0.0938829 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 55 components and 0.0938829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060026Jy sigma=0.880240 ! Fit after self-cal, rms=0.060070Jy sigma=0.879926 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9872 x 8.902 at 17.75 degrees (North through East) ! Clean map min=-0.0027275 max=0.078483 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 KP 0.95 LA 1.05 OV 0.97 ! PT 1.03 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.97 KP 0.94 LA 0.97 OV 1.06 ! PT 1.06 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.92 KP 1.03 LA 0.99 OV 0.99 ! PT 1.10 SC 0.94 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 0.93 KP 0.96 LA 1.02 OV 1.09 ! PT 0.93 SC 1.05 ! ! ! Fit before self-cal, rms=0.060070Jy sigma=0.879926 ! Fit after self-cal, rms=0.060128Jy sigma=0.875729 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9955 mas, bmaj=8.943 mas, bpa=17.74 degrees ! Estimated noise=0.792873 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000185974 Jy ! Component: 100 - total flux cleaned = -0.000187714 Jy ! Component: 150 - total flux cleaned = -0.000213686 Jy ! Component: 200 - total flux cleaned = -0.000237971 Jy ! Total flux subtracted in 200 components = -0.000237971 Jy ! Clean residual min=-0.002011 max=0.002591 Jy/beam ! Clean residual mean=0.000005 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 0.0936449 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 62 components and 0.0936449 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060108Jy sigma=0.875267 ! Fit after self-cal, rms=0.060145Jy sigma=0.875028 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060145Jy sigma=0.875028 ! Fit after self-cal, rms=0.060136Jy sigma=0.874979 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9962 mas, bmaj=8.948 mas, bpa=17.74 degrees ! Estimated noise=0.79199 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.137e-06 Jy ! Component: 100 - total flux cleaned = -1.72922e-05 Jy ! Component: 150 - total flux cleaned = -7.9183e-05 Jy ! Component: 200 - total flux cleaned = -0.00011688 Jy ! Total flux subtracted in 200 components = -0.00011688 Jy ! Clean residual min=-0.002092 max=0.002577 Jy/beam ! Clean residual mean=0.000007 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.093528 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 67 components and 0.093528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060124Jy sigma=0.874703 ! Fit after self-cal, rms=0.060126Jy sigma=0.874693 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.30577e-05 Jy ! Component: 100 - total flux cleaned = -4.75534e-05 Jy ! Component: 150 - total flux cleaned = -6.251e-05 Jy ! Component: 200 - total flux cleaned = -6.2946e-05 Jy ! Total flux subtracted in 200 components = -6.2946e-05 Jy ! Clean residual min=-0.002083 max=0.002581 Jy/beam ! Clean residual mean=0.000007 rms=0.000638 Jy/beam ! Combined flux in latest and established models = 0.0934651 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 72 components and 0.0934651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060119Jy sigma=0.874537 ! Fit after self-cal, rms=0.060118Jy sigma=0.874531 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060118Jy sigma=0.874531 ! Fit after self-cal, rms=0.060312Jy sigma=0.871967 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9967 mas, bmaj=8.934 mas, bpa=17.77 degrees ! Estimated noise=0.792853 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000110357 Jy ! Component: 100 - total flux cleaned = -6.32265e-05 Jy ! Component: 150 - total flux cleaned = -2.25306e-05 Jy ! Component: 200 - total flux cleaned = -1.00119e-05 Jy ! Total flux subtracted in 200 components = -1.00119e-05 Jy ! Clean residual min=-0.002020 max=0.002394 Jy/beam ! Clean residual mean=0.000018 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.0934551 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 79 components and 0.0934551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060304Jy sigma=0.871879 ! Fit after self-cal, rms=0.060322Jy sigma=0.871782 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.01538e-05 Jy ! Component: 100 - total flux cleaned = 1.36665e-05 Jy ! Component: 150 - total flux cleaned = 2.60106e-05 Jy ! Component: 200 - total flux cleaned = 3.74402e-05 Jy ! Total flux subtracted in 200 components = 3.74402e-05 Jy ! Clean residual min=-0.002014 max=0.002433 Jy/beam ! Clean residual mean=0.000018 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.0934925 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 83 components and 0.0934925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060317Jy sigma=0.871719 ! Fit after self-cal, rms=0.060317Jy sigma=0.871715 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060317Jy sigma=0.871715 ! Fit after self-cal, rms=0.060443Jy sigma=0.871612 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.346 mas, bmaj=16.51 mas, bpa=3.4 degrees ! Estimated noise=0.906008 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.85009e-06 Jy ! Component: 100 - total flux cleaned = 2.22948e-05 Jy ! Component: 150 - total flux cleaned = 4.37316e-05 Jy ! Component: 200 - total flux cleaned = 6.46989e-05 Jy ! Total flux subtracted in 200 components = 6.46989e-05 Jy ! Clean residual min=-0.001662 max=0.001966 Jy/beam ! Clean residual mean=0.000026 rms=0.000611 Jy/beam ! Combined flux in latest and established models = 0.0935572 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 92 components and 0.0935572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060443Jy sigma=0.871593 ! Fit after self-cal, rms=0.060444Jy sigma=0.871586 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.38941e-05 Jy ! Component: 100 - total flux cleaned = 3.08361e-05 Jy ! Component: 150 - total flux cleaned = 4.459e-05 Jy ! Component: 200 - total flux cleaned = 5.8099e-05 Jy ! Total flux subtracted in 200 components = 5.8099e-05 Jy ! Clean residual min=-0.001646 max=0.001974 Jy/beam ! Clean residual mean=0.000026 rms=0.000609 Jy/beam ! Combined flux in latest and established models = 0.0936153 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 95 components and 0.0936153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060445Jy sigma=0.871580 ! Fit after self-cal, rms=0.060444Jy sigma=0.871576 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.9981 mas, bmaj=8.934 mas, bpa=17.78 degrees ! Estimated noise=0.794288 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9981 x 8.934 at 17.78 degrees (North through East) ! Clean map min=-0.0018868 max=0.077973 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6686 mas, bmaj=7.637 mas, bpa=18.64 degrees ! Estimated noise=1.67444 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0566209 Jy ! Component: 100 - total flux cleaned = 0.0722357 Jy ! Component: 150 - total flux cleaned = 0.0811307 Jy ! Component: 200 - total flux cleaned = 0.0866181 Jy ! Total flux subtracted in 200 components = 0.0866181 Jy ! Clean residual min=-0.005923 max=0.006725 Jy/beam ! Clean residual mean=-0.000002 rms=0.001320 Jy/beam ! Combined flux in latest and established models = 0.0866181 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.0866181 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9981 mas, bmaj=8.934 mas, bpa=17.78 degrees ! Estimated noise=0.794288 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00488493 Jy ! Component: 100 - total flux cleaned = 0.00655562 Jy ! Component: 150 - total flux cleaned = 0.00690247 Jy ! Component: 200 - total flux cleaned = 0.00715506 Jy ! Total flux subtracted in 200 components = 0.00715506 Jy ! Clean residual min=-0.002163 max=0.002514 Jy/beam ! Clean residual mean=0.000017 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.0937731 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 60 components and 0.0937731 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.346 mas, bmaj=16.51 mas, bpa=3.4 degrees ! Estimated noise=0.906008 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.84955e-05 Jy ! Component: 100 - total flux cleaned = 0.000119553 Jy ! Component: 150 - total flux cleaned = 0.000120884 Jy ! Component: 200 - total flux cleaned = 0.000122369 Jy ! Total flux subtracted in 200 components = 0.000122369 Jy ! Clean residual min=-0.001660 max=0.002020 Jy/beam ! Clean residual mean=0.000023 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.0938955 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.14931e-07 Jy ! Component: 100 - total flux cleaned = -7.57913e-06 Jy ! Component: 150 - total flux cleaned = -6.25817e-06 Jy ! Component: 200 - total flux cleaned = 1.37414e-06 Jy ! Total flux subtracted in 200 components = 1.37414e-06 Jy ! Clean residual min=-0.001658 max=0.002005 Jy/beam ! Clean residual mean=0.000023 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.0938968 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 79 components and 0.0938968 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9981 mas, bmaj=8.934 mas, bpa=17.78 degrees ! Estimated noise=0.794288 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.07977e-05 Jy ! Component: 100 - total flux cleaned = -0.000109986 Jy ! Component: 150 - total flux cleaned = -9.28753e-05 Jy ! Component: 200 - total flux cleaned = -9.21635e-05 Jy ! Total flux subtracted in 200 components = -9.21635e-05 Jy ! Clean residual min=-0.002110 max=0.002478 Jy/beam ! Clean residual mean=0.000016 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.0938047 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 89 components and 0.0938047 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060470Jy sigma=0.872058 ! Fit after self-cal, rms=0.060470Jy sigma=0.872011 wmodel J0317-4414_X_map.mod ! Writing 89 model components to file: J0317-4414_X_map.mod wobs J0317-4414_X_uvs.fits ! Writing UV FITS file: J0317-4414_X_uvs.fits wwins J0317-4414_X_map.win ! wwins: Wrote 1 windows to J0317-4414_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000931255 Jy ! Component: 100 - total flux cleaned = 0.00115579 Jy ! Component: 150 - total flux cleaned = 0.00125959 Jy ! Component: 200 - total flux cleaned = 0.00132608 Jy ! Component: 250 - total flux cleaned = 0.00135833 Jy ! Component: 300 - total flux cleaned = 0.00142054 Jy ! Component: 350 - total flux cleaned = 0.00148088 Jy ! Component: 400 - total flux cleaned = 0.00162663 Jy ! Component: 450 - total flux cleaned = 0.00176807 Jy ! Component: 500 - total flux cleaned = 0.00185057 Jy ! Component: 550 - total flux cleaned = 0.0020373 Jy ! Component: 600 - total flux cleaned = 0.00216693 Jy ! Component: 650 - total flux cleaned = 0.002218 Jy ! Component: 700 - total flux cleaned = 0.00231777 Jy ! Component: 750 - total flux cleaned = 0.00231785 Jy ! Component: 800 - total flux cleaned = 0.00236551 Jy ! Component: 850 - total flux cleaned = 0.0022953 Jy ! Component: 900 - total flux cleaned = 0.0022722 Jy ! Component: 950 - total flux cleaned = 0.00224931 Jy ! Component: 1000 - total flux cleaned = 0.00227149 Jy ! Component: 1050 - total flux cleaned = 0.00220576 Jy ! Component: 1100 - total flux cleaned = 0.00222742 Jy ! Component: 1150 - total flux cleaned = 0.00229123 Jy ! Component: 1200 - total flux cleaned = 0.0022699 Jy ! Component: 1250 - total flux cleaned = 0.00222862 Jy ! Component: 1300 - total flux cleaned = 0.00220833 Jy ! Component: 1350 - total flux cleaned = 0.00216849 Jy ! Component: 1400 - total flux cleaned = 0.00224787 Jy ! Component: 1450 - total flux cleaned = 0.00226708 Jy ! Component: 1500 - total flux cleaned = 0.00226687 Jy ! Component: 1550 - total flux cleaned = 0.00230518 Jy ! Component: 1600 - total flux cleaned = 0.00234328 Jy ! Component: 1650 - total flux cleaned = 0.00239946 Jy ! Component: 1700 - total flux cleaned = 0.00245458 Jy ! Component: 1750 - total flux cleaned = 0.00249114 Jy ! Component: 1800 - total flux cleaned = 0.00250928 Jy ! Component: 1850 - total flux cleaned = 0.00256306 Jy ! Component: 1900 - total flux cleaned = 0.00254538 Jy ! Component: 1950 - total flux cleaned = 0.0025808 Jy ! Component: 2000 - total flux cleaned = 0.0025636 Jy ! Component: 2050 - total flux cleaned = 0.00265001 Jy ! Component: 2100 - total flux cleaned = 0.00266679 Jy ! Component: 2150 - total flux cleaned = 0.00264968 Jy ! Component: 2200 - total flux cleaned = 0.00266649 Jy ! Component: 2250 - total flux cleaned = 0.00273337 Jy ! Component: 2300 - total flux cleaned = 0.0027002 Jy ! Component: 2350 - total flux cleaned = 0.0027166 Jy ! Component: 2400 - total flux cleaned = 0.00274935 Jy ! Component: 2450 - total flux cleaned = 0.00276537 Jy ! Component: 2500 - total flux cleaned = 0.00284573 Jy ! Component: 2550 - total flux cleaned = 0.00294137 Jy ! Component: 2600 - total flux cleaned = 0.00298872 Jy ! Component: 2650 - total flux cleaned = 0.00306719 Jy ! Component: 2700 - total flux cleaned = 0.00317641 Jy ! Component: 2750 - total flux cleaned = 0.00322294 Jy ! Component: 2800 - total flux cleaned = 0.00336152 Jy ! Component: 2850 - total flux cleaned = 0.00343795 Jy ! Component: 2900 - total flux cleaned = 0.00351393 Jy ! Component: 2950 - total flux cleaned = 0.00355926 Jy ! Component: 3000 - total flux cleaned = 0.0036793 Jy ! Component: 3050 - total flux cleaned = 0.00376876 Jy ! Component: 3100 - total flux cleaned = 0.00382817 Jy ! Component: 3150 - total flux cleaned = 0.00391647 Jy ! Component: 3200 - total flux cleaned = 0.00396049 Jy ! Component: 3250 - total flux cleaned = 0.00406238 Jy ! Component: 3300 - total flux cleaned = 0.00413467 Jy ! Component: 3350 - total flux cleaned = 0.00416345 Jy ! Component: 3400 - total flux cleaned = 0.00429222 Jy ! Component: 3450 - total flux cleaned = 0.00432064 Jy ! Component: 3500 - total flux cleaned = 0.00434893 Jy ! Component: 3550 - total flux cleaned = 0.00433493 Jy ! Component: 3600 - total flux cleaned = 0.00436308 Jy ! Component: 3650 - total flux cleaned = 0.00437705 Jy ! Component: 3700 - total flux cleaned = 0.00440485 Jy ! Component: 3750 - total flux cleaned = 0.00445999 Jy ! Component: 3800 - total flux cleaned = 0.00445999 Jy ! Component: 3850 - total flux cleaned = 0.00451467 Jy ! Component: 3900 - total flux cleaned = 0.00451473 Jy ! Component: 3950 - total flux cleaned = 0.00458239 Jy ! Component: 4000 - total flux cleaned = 0.00460927 Jy ! Component: 4050 - total flux cleaned = 0.00459575 Jy ! Total flux subtracted in 4096 components = 0.00458233 Jy ! Clean residual min=-0.000733 max=0.000737 Jy/beam ! Clean residual mean=0.000001 rms=0.000252 Jy/beam ! Combined flux in latest and established models = 0.098387 Jy keep ! Adding 225 model components to the UV plane model. ! The established model now contains 314 components and 0.098387 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv118_uvs/J0317-4414_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9981 x 8.934 at 17.78 degrees (North through East) ! Clean map min=-0.0019141 max=0.073661 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv118_uvs/J0317-4414_X_map.fits wmodel /scr/pima/rv118_uvs/J0317-4414_X_map.mod ! Writing 314 model components to file: /scr/pima/rv118_uvs/J0317-4414_X_map.mod wobs /scr/pima/rv118_uvs/J0317-4414_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv118_uvs/J0317-4414_X_uvs.fits wwins /scr/pima/rv118_uvs/J0317-4414_X_map.win ! wwins: Wrote 2 windows to /scr/pima/rv118_uvs/J0317-4414_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0736611 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000248164 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.0107 1.0107 2.0214 4.0428 8.0856 16.1712 32.3424 64.6848 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.073 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 296.823 quit ! Quitting program ! Log file /scr/pima/rv118_uvs/J0317-4414_X_dfm.log closed on Sun Dec 10 00:07:24 2017