! Started logfile: /scr/pima/rv118_uvs/J0317-4414_S_dfm.log on Sun Dec 10 00:07:45 2017 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23275 obs /scr/pima/rv118_uvs/J0317-4414_S_uva.fits ! Reading UV FITS file: /scr/pima/rv118_uvs/J0317-4414_S_uva.fits ! AN table 1: 58 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.956322 visibilities/baseline/integration-bin. ! Found source: J0317-4414 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23275e+09 8e+06 1 8e+06 ! 02 2 2.26275e+09 8e+06 1 8e+06 ! 03 3 2.35275e+09 8e+06 1 8e+06 ! 04 4 2.37275e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 3328 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0317-4414_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.005137Jy sigma=12.778982 ! Fit after self-cal, rms=0.923584Jy sigma=11.754105 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.586 mas, bmaj=28.63 mas, bpa=18.21 degrees ! Estimated noise=2.12479 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0641211 Jy ! Component: 100 - total flux cleaned = 0.0786091 Jy ! Total flux subtracted in 100 components = 0.0786091 Jy ! Clean residual min=-0.013670 max=0.013318 Jy/beam ! Clean residual mean=0.000040 rms=0.003407 Jy/beam ! Combined flux in latest and established models = 0.0786091 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0786091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095281Jy sigma=1.117843 ! Fit after self-cal, rms=0.094505Jy sigma=1.108630 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.598 mas, bmaj=33.48 mas, bpa=17.8 degrees ! Estimated noise=0.990149 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.01443e-05 Jy ! Component: 100 - total flux cleaned = 3.69652e-05 Jy ! Component: 150 - total flux cleaned = -5.00374e-05 Jy ! Component: 200 - total flux cleaned = -0.000129429 Jy ! Total flux subtracted in 200 components = -0.000129429 Jy ! Clean residual min=-0.009095 max=0.008414 Jy/beam ! Clean residual mean=0.000045 rms=0.002684 Jy/beam ! Combined flux in latest and established models = 0.0784796 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 25 components and 0.0784796 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094213Jy sigma=1.105793 ! Fit after self-cal, rms=0.094156Jy sigma=1.105575 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.598 x 33.48 at 17.8 degrees (North through East) ! Clean map min=-0.0088315 max=0.075124 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.10 KP 1.05 LA 1.07 OV 0.98 ! PT 1.00 SC 1.28 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.08 KP 1.01 LA 1.09 OV 1.03 ! PT 1.06 SC 1.27 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.12 KP 0.55 LA 1.01 OV 1.05 ! PT 1.10 SC 0.61 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 0.98 KP 1.10 LA 1.10 OV 0.88 ! PT 1.05 SC 1.16 ! ! ! Fit before self-cal, rms=0.094156Jy sigma=1.105575 ! Fit after self-cal, rms=0.083034Jy sigma=1.041415 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.515 mas, bmaj=33.29 mas, bpa=17.74 degrees ! Estimated noise=0.983065 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.93273e-06 Jy ! Component: 100 - total flux cleaned = -6.09419e-05 Jy ! Component: 150 - total flux cleaned = -0.000115053 Jy ! Component: 200 - total flux cleaned = -6.67886e-05 Jy ! Total flux subtracted in 200 components = -6.67886e-05 Jy ! Clean residual min=-0.005462 max=0.006927 Jy/beam ! Clean residual mean=-0.000049 rms=0.002050 Jy/beam ! Combined flux in latest and established models = 0.0784129 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 42 components and 0.0784129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082957Jy sigma=1.040428 ! Fit after self-cal, rms=0.083726Jy sigma=1.034437 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083726Jy sigma=1.034437 ! Fit after self-cal, rms=0.084782Jy sigma=1.033405 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.508 mas, bmaj=33.3 mas, bpa=17.72 degrees ! Estimated noise=0.986461 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000165117 Jy ! Component: 100 - total flux cleaned = 0.000217983 Jy ! Component: 150 - total flux cleaned = 0.000313008 Jy ! Component: 200 - total flux cleaned = 0.000312581 Jy ! Total flux subtracted in 200 components = 0.000312581 Jy ! Clean residual min=-0.005280 max=0.006696 Jy/beam ! Clean residual mean=-0.000044 rms=0.002032 Jy/beam ! Combined flux in latest and established models = 0.0787254 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 46 components and 0.0787254 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084731Jy sigma=1.032567 ! Fit after self-cal, rms=0.084944Jy sigma=1.032372 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.02064e-05 Jy ! Component: 100 - total flux cleaned = 6.46885e-05 Jy ! Component: 150 - total flux cleaned = 0.000107298 Jy ! Component: 200 - total flux cleaned = 0.000107763 Jy ! Total flux subtracted in 200 components = 0.000107763 Jy ! Clean residual min=-0.005283 max=0.006687 Jy/beam ! Clean residual mean=-0.000039 rms=0.002030 Jy/beam ! Combined flux in latest and established models = 0.0788332 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 51 components and 0.0788332 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084910Jy sigma=1.031701 ! Fit after self-cal, rms=0.084932Jy sigma=1.031671 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084932Jy sigma=1.031671 ! Fit after self-cal, rms=0.084951Jy sigma=1.025409 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.502 mas, bmaj=33.13 mas, bpa=17.79 degrees ! Estimated noise=0.987344 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000635876 Jy ! Component: 100 - total flux cleaned = 0.000739541 Jy ! Component: 150 - total flux cleaned = 0.000829733 Jy ! Component: 200 - total flux cleaned = 0.000912243 Jy ! Total flux subtracted in 200 components = 0.000912243 Jy ! Clean residual min=-0.004880 max=0.006278 Jy/beam ! Clean residual mean=-0.000051 rms=0.001905 Jy/beam ! Combined flux in latest and established models = 0.0797454 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 66 components and 0.0797454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084894Jy sigma=1.024690 ! Fit after self-cal, rms=0.085058Jy sigma=1.023727 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000222905 Jy ! Component: 100 - total flux cleaned = -0.000149256 Jy ! Component: 150 - total flux cleaned = -7.98225e-05 Jy ! Component: 200 - total flux cleaned = -4.64177e-05 Jy ! Total flux subtracted in 200 components = -4.64177e-05 Jy ! Clean residual min=-0.004892 max=0.006275 Jy/beam ! Clean residual mean=-0.000042 rms=0.001891 Jy/beam ! Combined flux in latest and established models = 0.079699 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 69 components and 0.079699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085029Jy sigma=1.023294 ! Fit after self-cal, rms=0.085020Jy sigma=1.023262 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085020Jy sigma=1.023262 ! Fit after self-cal, rms=0.085512Jy sigma=1.022875 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.86 mas, bmaj=55.75 mas, bpa=5.807 degrees ! Estimated noise=1.17063 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000283676 Jy ! Component: 100 - total flux cleaned = -0.00019147 Jy ! Component: 150 - total flux cleaned = -0.000144861 Jy ! Component: 200 - total flux cleaned = -0.000115187 Jy ! Total flux subtracted in 200 components = -0.000115187 Jy ! Clean residual min=-0.005822 max=0.007956 Jy/beam ! Clean residual mean=-0.000085 rms=0.002726 Jy/beam ! Combined flux in latest and established models = 0.0795838 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 76 components and 0.0795838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085508Jy sigma=1.022904 ! Fit after self-cal, rms=0.085564Jy sigma=1.022778 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00018914 Jy ! Component: 100 - total flux cleaned = -0.000144876 Jy ! Component: 150 - total flux cleaned = -0.000116775 Jy ! Component: 200 - total flux cleaned = -8.95604e-05 Jy ! Total flux subtracted in 200 components = -8.95604e-05 Jy ! Clean residual min=-0.005808 max=0.007962 Jy/beam ! Clean residual mean=-0.000083 rms=0.002715 Jy/beam ! Combined flux in latest and established models = 0.0794943 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 81 components and 0.0794943 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085562Jy sigma=1.022736 ! Fit after self-cal, rms=0.085561Jy sigma=1.022716 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.495 mas, bmaj=33 mas, bpa=17.86 degrees ! Estimated noise=0.987115 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.495 x 33 at 17.86 degrees (North through East) ! Clean map min=-0.0046675 max=0.074327 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.52 mas, bmaj=28.87 mas, bpa=18.3 degrees ! Estimated noise=2.10304 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0635873 Jy ! Component: 100 - total flux cleaned = 0.0786304 Jy ! Component: 150 - total flux cleaned = 0.0793596 Jy ! Component: 200 - total flux cleaned = 0.0791783 Jy ! Total flux subtracted in 200 components = 0.0791783 Jy ! Clean residual min=-0.007726 max=0.008213 Jy/beam ! Clean residual mean=0.000005 rms=0.002290 Jy/beam ! Combined flux in latest and established models = 0.0791783 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0791783 Jy ! Inverting map and beam ! Estimated beam: bmin=3.495 mas, bmaj=33 mas, bpa=17.86 degrees ! Estimated noise=0.987115 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000346365 Jy ! Component: 100 - total flux cleaned = 0.000526614 Jy ! Component: 150 - total flux cleaned = 0.000604692 Jy ! Component: 200 - total flux cleaned = 0.000668716 Jy ! Total flux subtracted in 200 components = 0.000668716 Jy ! Clean residual min=-0.004862 max=0.006582 Jy/beam ! Clean residual mean=-0.000048 rms=0.001931 Jy/beam ! Combined flux in latest and established models = 0.079847 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 40 components and 0.079847 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.86 mas, bmaj=55.75 mas, bpa=5.807 degrees ! Estimated noise=1.17063 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000579144 Jy ! Component: 100 - total flux cleaned = -0.000581318 Jy ! Component: 150 - total flux cleaned = -0.000547123 Jy ! Component: 200 - total flux cleaned = -0.000517154 Jy ! Total flux subtracted in 200 components = -0.000517154 Jy ! Clean residual min=-0.005942 max=0.007952 Jy/beam ! Clean residual mean=-0.000085 rms=0.002757 Jy/beam ! Combined flux in latest and established models = 0.0793299 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.93537e-05 Jy ! Component: 100 - total flux cleaned = 8.24652e-05 Jy ! Component: 150 - total flux cleaned = 0.000107151 Jy ! Component: 200 - total flux cleaned = 0.000153505 Jy ! Total flux subtracted in 200 components = 0.000153505 Jy ! Clean residual min=-0.005921 max=0.007950 Jy/beam ! Clean residual mean=-0.000084 rms=0.002745 Jy/beam ! Combined flux in latest and established models = 0.0794834 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 49 components and 0.0794834 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.495 mas, bmaj=33 mas, bpa=17.86 degrees ! Estimated noise=0.987115 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00044115 Jy ! Component: 100 - total flux cleaned = 0.000601018 Jy ! Component: 150 - total flux cleaned = 0.000646762 Jy ! Component: 200 - total flux cleaned = 0.000643696 Jy ! Total flux subtracted in 200 components = 0.000643696 Jy ! Clean residual min=-0.004662 max=0.006535 Jy/beam ! Clean residual mean=-0.000047 rms=0.001886 Jy/beam ! Combined flux in latest and established models = 0.0801271 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 62 components and 0.0801271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085607Jy sigma=1.023251 ! Fit after self-cal, rms=0.085580Jy sigma=1.023012 wmodel J0317-4414_S_map.mod ! Writing 62 model components to file: J0317-4414_S_map.mod wobs J0317-4414_S_uvs.fits ! Writing UV FITS file: J0317-4414_S_uvs.fits wwins J0317-4414_S_map.win ! wwins: Wrote 1 windows to J0317-4414_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00245101 Jy ! Component: 100 - total flux cleaned = 0.00322975 Jy ! Component: 150 - total flux cleaned = 0.00402906 Jy ! Component: 200 - total flux cleaned = 0.00425267 Jy ! Component: 250 - total flux cleaned = 0.00445971 Jy ! Component: 300 - total flux cleaned = 0.00459029 Jy ! Component: 350 - total flux cleaned = 0.00471458 Jy ! Component: 400 - total flux cleaned = 0.00483428 Jy ! Component: 450 - total flux cleaned = 0.00500681 Jy ! Component: 500 - total flux cleaned = 0.00528128 Jy ! Component: 550 - total flux cleaned = 0.00528162 Jy ! Component: 600 - total flux cleaned = 0.00523003 Jy ! Component: 650 - total flux cleaned = 0.0050308 Jy ! Component: 700 - total flux cleaned = 0.00493426 Jy ! Component: 750 - total flux cleaned = 0.00488799 Jy ! Component: 800 - total flux cleaned = 0.00479867 Jy ! Component: 850 - total flux cleaned = 0.00466705 Jy ! Component: 900 - total flux cleaned = 0.0045825 Jy ! Component: 950 - total flux cleaned = 0.00441792 Jy ! Component: 1000 - total flux cleaned = 0.00433756 Jy ! Component: 1050 - total flux cleaned = 0.00425951 Jy ! Component: 1100 - total flux cleaned = 0.00414518 Jy ! Component: 1150 - total flux cleaned = 0.00422056 Jy ! Component: 1200 - total flux cleaned = 0.00425681 Jy ! Component: 1250 - total flux cleaned = 0.0043287 Jy ! Component: 1300 - total flux cleaned = 0.00429282 Jy ! Component: 1350 - total flux cleaned = 0.00422346 Jy ! Component: 1400 - total flux cleaned = 0.00408807 Jy ! Component: 1450 - total flux cleaned = 0.00402258 Jy ! Component: 1500 - total flux cleaned = 0.00405638 Jy ! Component: 1550 - total flux cleaned = 0.00415353 Jy ! Component: 1600 - total flux cleaned = 0.0041219 Jy ! Component: 1650 - total flux cleaned = 0.00415316 Jy ! Component: 1700 - total flux cleaned = 0.00412272 Jy ! Component: 1750 - total flux cleaned = 0.00421357 Jy ! Component: 1800 - total flux cleaned = 0.00421396 Jy ! Component: 1850 - total flux cleaned = 0.00430197 Jy ! Component: 1900 - total flux cleaned = 0.00433075 Jy ! Component: 1950 - total flux cleaned = 0.00433058 Jy ! Component: 2000 - total flux cleaned = 0.00441495 Jy ! Component: 2050 - total flux cleaned = 0.00441477 Jy ! Component: 2100 - total flux cleaned = 0.00446992 Jy ! Component: 2150 - total flux cleaned = 0.00449713 Jy ! Component: 2200 - total flux cleaned = 0.00457801 Jy ! Component: 2250 - total flux cleaned = 0.00465805 Jy ! Component: 2300 - total flux cleaned = 0.00476394 Jy ! Component: 2350 - total flux cleaned = 0.00484281 Jy ! Component: 2400 - total flux cleaned = 0.00486879 Jy ! Component: 2450 - total flux cleaned = 0.00494656 Jy ! Component: 2500 - total flux cleaned = 0.00494674 Jy ! Component: 2550 - total flux cleaned = 0.00502367 Jy ! Component: 2600 - total flux cleaned = 0.00509985 Jy ! Component: 2650 - total flux cleaned = 0.00517561 Jy ! Component: 2700 - total flux cleaned = 0.00525076 Jy ! Component: 2750 - total flux cleaned = 0.00527568 Jy ! Component: 2800 - total flux cleaned = 0.00535004 Jy ! Component: 2850 - total flux cleaned = 0.00537462 Jy ! Component: 2900 - total flux cleaned = 0.00544805 Jy ! Component: 2950 - total flux cleaned = 0.0054724 Jy ! Component: 3000 - total flux cleaned = 0.00542397 Jy ! Component: 3050 - total flux cleaned = 0.00544824 Jy ! Component: 3100 - total flux cleaned = 0.00547237 Jy ! Component: 3150 - total flux cleaned = 0.00552046 Jy ! Component: 3200 - total flux cleaned = 0.00547257 Jy ! Component: 3250 - total flux cleaned = 0.00549636 Jy ! Component: 3300 - total flux cleaned = 0.00549635 Jy ! Component: 3350 - total flux cleaned = 0.00544885 Jy ! Component: 3400 - total flux cleaned = 0.00544893 Jy ! Component: 3450 - total flux cleaned = 0.00542544 Jy ! Component: 3500 - total flux cleaned = 0.00552019 Jy ! Component: 3550 - total flux cleaned = 0.00549659 Jy ! Component: 3600 - total flux cleaned = 0.00552009 Jy ! Component: 3650 - total flux cleaned = 0.00552015 Jy ! Component: 3700 - total flux cleaned = 0.00554377 Jy ! Component: 3750 - total flux cleaned = 0.00556738 Jy ! Component: 3800 - total flux cleaned = 0.00559079 Jy ! Component: 3850 - total flux cleaned = 0.00563814 Jy ! Component: 3900 - total flux cleaned = 0.00568536 Jy ! Component: 3950 - total flux cleaned = 0.00568529 Jy ! Component: 4000 - total flux cleaned = 0.00578008 Jy ! Component: 4050 - total flux cleaned = 0.0057564 Jy ! Total flux subtracted in 4096 components = 0.00582757 Jy ! Clean residual min=-0.001294 max=0.001309 Jy/beam ! Clean residual mean=-0.000033 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 0.0859546 Jy keep ! Adding 293 model components to the UV plane model. ! The established model now contains 355 components and 0.0859546 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv118_uvs/J0317-4414_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.495 x 33 at 17.86 degrees (North through East) ! Clean map min=-0.0028171 max=0.071778 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv118_uvs/J0317-4414_S_map.fits wmodel /scr/pima/rv118_uvs/J0317-4414_S_map.mod ! Writing 355 model components to file: /scr/pima/rv118_uvs/J0317-4414_S_map.mod wobs /scr/pima/rv118_uvs/J0317-4414_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv118_uvs/J0317-4414_S_uvs.fits wwins /scr/pima/rv118_uvs/J0317-4414_S_map.win ! wwins: Wrote 2 windows to /scr/pima/rv118_uvs/J0317-4414_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0717783 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000490387 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.04959 2.04959 4.09918 8.19836 16.3967 32.7934 65.5869 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.071 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 146.37 quit ! Quitting program ! Log file /scr/pima/rv118_uvs/J0317-4414_S_dfm.log closed on Sun Dec 10 00:07:49 2017