! Started logfile: /scr/pima/rv118_uvs/J0214+1722_S_dfm.log on Sun Dec 10 00:07:24 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.23275
obs     /scr/pima/rv118_uvs/J0214+1722_S_uva.fits
! Reading UV FITS file: /scr/pima/rv118_uvs/J0214+1722_S_uva.fits
! AN table 1: 58 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.865421 visibilities/baseline/integration-bin.
! Found source: J0214+1722
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23275e+09        8e+06          1        8e+06
!  02        2  2.26275e+09        8e+06          1        8e+06
!  03        3  2.35275e+09        8e+06          1        8e+06
!  04        4  2.37275e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 7228 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0214+1722_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.008198Jy  sigma=20.054601
! Fit after  self-cal, rms=0.935495Jy  sigma=18.798556
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.64 mas, bmaj=7.818 mas, bpa=24.38 degrees
! Estimated noise=0.82711 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0491927 Jy
! Component: 100  -  total flux cleaned = 0.0606865 Jy
! Total flux subtracted in 100 components = 0.0606865 Jy
! Clean residual min=-0.004170 max=0.005739 Jy/beam
! Clean residual mean=-0.000008 rms=0.001142 Jy/beam
! Combined flux in latest and established models = 0.0606865 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0606865 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109459Jy  sigma=1.105054
! Fit after  self-cal, rms=0.109260Jy  sigma=1.097346
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.536 mas, bmaj=8.798 mas, bpa=20.64 degrees
! Estimated noise=0.431064 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.5, -7).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00694076 Jy
! Component: 100  -  total flux cleaned = 0.0103911 Jy
! Component: 150  -  total flux cleaned = 0.0109508 Jy
! Component: 200  -  total flux cleaned = 0.01133 Jy
! Total flux subtracted in 200 components = 0.01133 Jy
! Clean residual min=-0.003059 max=0.003509 Jy/beam
! Clean residual mean=0.000008 rms=0.000775 Jy/beam
! Combined flux in latest and established models = 0.0720165 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 29 components and 0.0720166 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108321Jy  sigma=1.084783
! Fit after  self-cal, rms=0.108293Jy  sigma=1.084163
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.536 x 8.798 at 20.64 degrees (North through East)
! Clean map  min=-0.0030373  max=0.064286 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.04     HN        0.98     KP        0.99     
!   LA        1.02     NL        0.90     OV        0.97     PT        1.03     
!   SC        1.23     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.06     HN        0.96     KP        1.01     
!   LA        0.96     NL        0.98     OV        0.99     PT        1.09     
!   SC        1.16     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.10     HN        1.09     KP        0.53     
!   LA        1.04     NL        0.30     OV        0.99     PT        1.06     
!   SC        0.66     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.08     HN        1.08     KP        1.06     
!   LA        1.02     NL        1.03     OV        1.00     PT        1.08     
!   SC        1.13     
! 
! 
! Fit before self-cal, rms=0.108293Jy  sigma=1.084163
! Fit after  self-cal, rms=0.055071Jy  sigma=1.038930
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.505 mas, bmaj=8.826 mas, bpa=20.4 degrees
! Estimated noise=0.424213 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00082679 Jy
! Component: 100  -  total flux cleaned = 0.000957701 Jy
! Component: 150  -  total flux cleaned = 0.00113528 Jy
! Component: 200  -  total flux cleaned = 0.00128406 Jy
! Total flux subtracted in 200 components = 0.00128406 Jy
! Clean residual min=-0.001955 max=0.001930 Jy/beam
! Clean residual mean=0.000002 rms=0.000434 Jy/beam
! Combined flux in latest and established models = 0.0733006 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 45 components and 0.0733006 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055001Jy  sigma=1.037818
! Fit after  self-cal, rms=0.055058Jy  sigma=1.034202
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055058Jy  sigma=1.034202
! Fit after  self-cal, rms=0.054796Jy  sigma=1.031797
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.499 mas, bmaj=8.817 mas, bpa=20.55 degrees
! Estimated noise=0.424999 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000728824 Jy
! Component: 100  -  total flux cleaned = 0.00084725 Jy
! Component: 150  -  total flux cleaned = 0.000993558 Jy
! Component: 200  -  total flux cleaned = 0.00103516 Jy
! Total flux subtracted in 200 components = 0.00103516 Jy
! Clean residual min=-0.001923 max=0.001486 Jy/beam
! Clean residual mean=0.000003 rms=0.000402 Jy/beam
! Combined flux in latest and established models = 0.0743358 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 58 components and 0.0743358 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054765Jy  sigma=1.031263
! Fit after  self-cal, rms=0.054798Jy  sigma=1.030986
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000138755 Jy
! Component: 100  -  total flux cleaned = 0.000198565 Jy
! Component: 150  -  total flux cleaned = 0.000216358 Jy
! Component: 200  -  total flux cleaned = 0.000233957 Jy
! Total flux subtracted in 200 components = 0.000233957 Jy
! Clean residual min=-0.001891 max=0.001448 Jy/beam
! Clean residual mean=0.000003 rms=0.000398 Jy/beam
! Combined flux in latest and established models = 0.0745698 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 69 components and 0.0745697 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054785Jy  sigma=1.030740
! Fit after  self-cal, rms=0.054781Jy  sigma=1.030716
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054781Jy  sigma=1.030716
! Fit after  self-cal, rms=0.054822Jy  sigma=1.030441
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.495 mas, bmaj=8.814 mas, bpa=20.68 degrees
! Estimated noise=0.425284 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000347303 Jy
! Component: 100  -  total flux cleaned = 0.000484356 Jy
! Component: 150  -  total flux cleaned = 0.000567342 Jy
! Component: 200  -  total flux cleaned = 0.000612537 Jy
! Total flux subtracted in 200 components = 0.000612537 Jy
! Clean residual min=-0.001889 max=0.001293 Jy/beam
! Clean residual mean=0.000002 rms=0.000391 Jy/beam
! Combined flux in latest and established models = 0.0751823 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 76 components and 0.0751823 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054809Jy  sigma=1.030217
! Fit after  self-cal, rms=0.054812Jy  sigma=1.030183
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.82451e-05 Jy
! Component: 100  -  total flux cleaned = 0.000103504 Jy
! Component: 150  -  total flux cleaned = 0.000130367 Jy
! Component: 200  -  total flux cleaned = 0.000142553 Jy
! Total flux subtracted in 200 components = 0.000142553 Jy
! Clean residual min=-0.001870 max=0.001283 Jy/beam
! Clean residual mean=0.000002 rms=0.000389 Jy/beam
! Combined flux in latest and established models = 0.0753248 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 83 components and 0.0753248 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054806Jy  sigma=1.030044
! Fit after  self-cal, rms=0.054803Jy  sigma=1.030033
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054803Jy  sigma=1.030033
! Fit after  self-cal, rms=0.054830Jy  sigma=1.029850
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.162 mas, bmaj=10.7 mas, bpa=11.38 degrees
! Estimated noise=0.482665 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000343691 Jy
! Component: 100  -  total flux cleaned = 0.000448595 Jy
! Component: 150  -  total flux cleaned = 0.000541153 Jy
! Component: 200  -  total flux cleaned = 0.000590818 Jy
! Total flux subtracted in 200 components = 0.000590818 Jy
! Clean residual min=-0.001533 max=0.001465 Jy/beam
! Clean residual mean=0.000003 rms=0.000405 Jy/beam
! Combined flux in latest and established models = 0.0759156 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 98 components and 0.0759156 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054828Jy  sigma=1.029803
! Fit after  self-cal, rms=0.054828Jy  sigma=1.029783
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.73768e-05 Jy
! Component: 100  -  total flux cleaned = 8.6993e-05 Jy
! Component: 150  -  total flux cleaned = 0.000103786 Jy
! Component: 200  -  total flux cleaned = 0.000109304 Jy
! Total flux subtracted in 200 components = 0.000109304 Jy
! Clean residual min=-0.001528 max=0.001445 Jy/beam
! Clean residual mean=0.000003 rms=0.000405 Jy/beam
! Combined flux in latest and established models = 0.0760249 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 106 components and 0.0760249 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054828Jy  sigma=1.029750
! Fit after  self-cal, rms=0.054826Jy  sigma=1.029744
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.494 mas, bmaj=8.813 mas, bpa=20.77 degrees
! Estimated noise=0.425631 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.494 x 8.813 at 20.77 degrees (North through East)
! Clean map  min=-0.0018109  max=0.062938 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.6 mas, bmaj=7.853 mas, bpa=24.27 degrees
! Estimated noise=0.827432 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0492141 Jy
! Component: 100  -  total flux cleaned = 0.0613194 Jy
! Component: 150  -  total flux cleaned = 0.0671557 Jy
! Component: 200  -  total flux cleaned = 0.0704363 Jy
! Total flux subtracted in 200 components = 0.0704363 Jy
! Clean residual min=-0.003718 max=0.003426 Jy/beam
! Clean residual mean=-0.000002 rms=0.000911 Jy/beam
! Combined flux in latest and established models = 0.0704363 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.0704363 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.494 mas, bmaj=8.813 mas, bpa=20.77 degrees
! Estimated noise=0.425631 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.5, -21).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0025307 Jy
! Component: 100  -  total flux cleaned = 0.00370216 Jy
! Component: 150  -  total flux cleaned = 0.00385261 Jy
! Component: 200  -  total flux cleaned = 0.00385209 Jy
! Total flux subtracted in 200 components = 0.00385209 Jy
! Clean residual min=-0.002055 max=0.001488 Jy/beam
! Clean residual mean=-0.000000 rms=0.000414 Jy/beam
! Combined flux in latest and established models = 0.0742884 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 53 components and 0.0742884 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.162 mas, bmaj=10.7 mas, bpa=11.38 degrees
! Estimated noise=0.482665 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000278015 Jy
! Component: 100  -  total flux cleaned = 0.000260464 Jy
! Component: 150  -  total flux cleaned = 0.000180512 Jy
! Component: 200  -  total flux cleaned = 0.000144906 Jy
! Total flux subtracted in 200 components = 0.000144906 Jy
! Clean residual min=-0.001545 max=0.001465 Jy/beam
! Clean residual mean=0.000001 rms=0.000409 Jy/beam
! Combined flux in latest and established models = 0.0744333 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.5554e-05 Jy
! Component: 100  -  total flux cleaned = -9.33686e-07 Jy
! Component: 150  -  total flux cleaned = -1.44125e-05 Jy
! Component: 200  -  total flux cleaned = -1.28974e-06 Jy
! Total flux subtracted in 200 components = -1.28974e-06 Jy
! Clean residual min=-0.001511 max=0.001452 Jy/beam
! Clean residual mean=0.000001 rms=0.000404 Jy/beam
! Combined flux in latest and established models = 0.074432 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 91 components and 0.074432 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.494 mas, bmaj=8.813 mas, bpa=20.77 degrees
! Estimated noise=0.425631 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000108991 Jy
! Component: 100  -  total flux cleaned = -0.000138239 Jy
! Component: 150  -  total flux cleaned = -0.000189297 Jy
! Component: 200  -  total flux cleaned = -0.000235696 Jy
! Total flux subtracted in 200 components = -0.000235696 Jy
! Clean residual min=-0.001858 max=0.001303 Jy/beam
! Clean residual mean=0.000000 rms=0.000390 Jy/beam
! Combined flux in latest and established models = 0.0741963 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 109 components and 0.0741963 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054828Jy  sigma=1.030220
! Fit after  self-cal, rms=0.054835Jy  sigma=1.030110
wmodel J0214+1722_S_map.mod
! Writing 109 model components to file: J0214+1722_S_map.mod
wobs   J0214+1722_S_uvs.fits
! Writing UV FITS file: J0214+1722_S_uvs.fits
wwins  J0214+1722_S_map.win
! wwins: Wrote 3 windows to J0214+1722_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000752186 Jy
! Component: 100  -  total flux cleaned = -0.00133196 Jy
! Component: 150  -  total flux cleaned = -0.00175773 Jy
! Component: 200  -  total flux cleaned = -0.00202954 Jy
! Component: 250  -  total flux cleaned = -0.00218232 Jy
! Component: 300  -  total flux cleaned = -0.00224562 Jy
! Component: 350  -  total flux cleaned = -0.00239044 Jy
! Component: 400  -  total flux cleaned = -0.0024916 Jy
! Component: 450  -  total flux cleaned = -0.00261022 Jy
! Component: 500  -  total flux cleaned = -0.00274572 Jy
! Component: 550  -  total flux cleaned = -0.0028794 Jy
! Component: 600  -  total flux cleaned = -0.0031039 Jy
! Component: 650  -  total flux cleaned = -0.00323218 Jy
! Component: 700  -  total flux cleaned = -0.00337671 Jy
! Component: 750  -  total flux cleaned = -0.00353709 Jy
! Component: 800  -  total flux cleaned = -0.00371286 Jy
! Component: 850  -  total flux cleaned = -0.00383408 Jy
! Component: 900  -  total flux cleaned = -0.00400493 Jy
! Component: 950  -  total flux cleaned = -0.00405556 Jy
! Component: 1000  -  total flux cleaned = -0.0041721 Jy
! Component: 1050  -  total flux cleaned = -0.00427082 Jy
! Component: 1100  -  total flux cleaned = -0.00435214 Jy
! Component: 1150  -  total flux cleaned = -0.00443277 Jy
! Component: 1200  -  total flux cleaned = -0.00457554 Jy
! Component: 1250  -  total flux cleaned = -0.00459128 Jy
! Component: 1300  -  total flux cleaned = -0.00468464 Jy
! Component: 1350  -  total flux cleaned = -0.00474627 Jy
! Component: 1400  -  total flux cleaned = -0.00482229 Jy
! Component: 1450  -  total flux cleaned = -0.0048674 Jy
! Component: 1500  -  total flux cleaned = -0.00488225 Jy
! Component: 1550  -  total flux cleaned = -0.00495624 Jy
! Component: 1600  -  total flux cleaned = -0.00497087 Jy
! Component: 1650  -  total flux cleaned = -0.00502874 Jy
! Component: 1700  -  total flux cleaned = -0.00508604 Jy
! Component: 1750  -  total flux cleaned = -0.0051003 Jy
! Component: 1800  -  total flux cleaned = -0.00517072 Jy
! Component: 1850  -  total flux cleaned = -0.00521262 Jy
! Component: 1900  -  total flux cleaned = -0.00526813 Jy
! Component: 1950  -  total flux cleaned = -0.00532297 Jy
! Component: 2000  -  total flux cleaned = -0.0053774 Jy
! Component: 2050  -  total flux cleaned = -0.00539079 Jy
! Component: 2100  -  total flux cleaned = -0.00544428 Jy
! Component: 2150  -  total flux cleaned = -0.00551047 Jy
! Component: 2200  -  total flux cleaned = -0.00553668 Jy
! Component: 2250  -  total flux cleaned = -0.00556275 Jy
! Component: 2300  -  total flux cleaned = -0.00557582 Jy
! Component: 2350  -  total flux cleaned = -0.00561448 Jy
! Component: 2400  -  total flux cleaned = -0.00560161 Jy
! Component: 2450  -  total flux cleaned = -0.00565214 Jy
! Component: 2500  -  total flux cleaned = -0.00567721 Jy
! Component: 2550  -  total flux cleaned = -0.00568957 Jy
! Component: 2600  -  total flux cleaned = -0.00568967 Jy
! Component: 2650  -  total flux cleaned = -0.00571417 Jy
! Component: 2700  -  total flux cleaned = -0.00573858 Jy
! Component: 2750  -  total flux cleaned = -0.00573872 Jy
! Component: 2800  -  total flux cleaned = -0.00576291 Jy
! Component: 2850  -  total flux cleaned = -0.00577492 Jy
! Component: 2900  -  total flux cleaned = -0.00577493 Jy
! Component: 2950  -  total flux cleaned = -0.0057397 Jy
! Component: 3000  -  total flux cleaned = -0.00578659 Jy
! Component: 3050  -  total flux cleaned = -0.00583297 Jy
! Component: 3100  -  total flux cleaned = -0.00582131 Jy
! Component: 3150  -  total flux cleaned = -0.00584412 Jy
! Component: 3200  -  total flux cleaned = -0.0058441 Jy
! Component: 3250  -  total flux cleaned = -0.00586668 Jy
! Component: 3300  -  total flux cleaned = -0.00586668 Jy
! Component: 3350  -  total flux cleaned = -0.00585544 Jy
! Component: 3400  -  total flux cleaned = -0.00591121 Jy
! Component: 3450  -  total flux cleaned = -0.0059333 Jy
! Component: 3500  -  total flux cleaned = -0.00596629 Jy
! Component: 3550  -  total flux cleaned = -0.00592243 Jy
! Component: 3600  -  total flux cleaned = -0.00594434 Jy
! Component: 3650  -  total flux cleaned = -0.00598776 Jy
! Component: 3700  -  total flux cleaned = -0.00599854 Jy
! Component: 3750  -  total flux cleaned = -0.00599868 Jy
! Component: 3800  -  total flux cleaned = -0.00602016 Jy
! Component: 3850  -  total flux cleaned = -0.00600955 Jy
! Component: 3900  -  total flux cleaned = -0.0060519 Jy
! Component: 3950  -  total flux cleaned = -0.00606244 Jy
! Component: 4000  -  total flux cleaned = -0.00610436 Jy
! Component: 4050  -  total flux cleaned = -0.00609393 Jy
! Total flux subtracted in 4096 components = -0.00605253 Jy
! Clean residual min=-0.000628 max=0.000667 Jy/beam
! Clean residual mean=-0.000000 rms=0.000198 Jy/beam
! Combined flux in latest and established models = 0.0681438 Jy
keep
! Adding 274 model components to the UV plane model.
! The established model now contains 383 components and 0.0681438 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv118_uvs/J0214+1722_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.494 x 8.813 at 20.77 degrees (North through East)
! Clean map  min=-0.0012495  max=0.062478 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv118_uvs/J0214+1722_S_map.fits
wmodel /scr/pima/rv118_uvs/J0214+1722_S_map.mod
! Writing 383 model components to file: /scr/pima/rv118_uvs/J0214+1722_S_map.mod
wobs   /scr/pima/rv118_uvs/J0214+1722_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv118_uvs/J0214+1722_S_uvs.fits
wwins  /scr/pima/rv118_uvs/J0214+1722_S_map.win
! wwins: Wrote 4 windows to /scr/pima/rv118_uvs/J0214+1722_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0624777 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000195841 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.940375 0.940375 1.88075 3.7615 7.523 15.046 30.092 60.184
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.062 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  319.021 
quit
! Quitting program
! Log file /scr/pima/rv118_uvs/J0214+1722_S_dfm.log closed on Sun Dec 10 00:07:28 2017