! Started logfile: /scr/pima/rv118_uvs/J0049+0237_S_dfm.log on Sun Dec 10 00:07:06 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.23275
obs     /scr/pima/rv118_uvs/J0049+0237_S_uva.fits
! Reading UV FITS file: /scr/pima/rv118_uvs/J0049+0237_S_uva.fits
! AN table 1: 29 integrations on 36 of 36 possible baselines.
! AN table 2: 96 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.635906 visibilities/baseline/integration-bin.
! Found source: J0049+0237
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23275e+09        8e+06          1        8e+06
!  02        2  2.26275e+09        8e+06          1        8e+06
!  03        3  2.35275e+09        8e+06          1        8e+06
!  04        4  2.37275e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 13644 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0049+0237_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
!  A total of 293 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
!  A total of 293 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
!  A total of 293 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
!  A total of 293 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.019484Jy  sigma=17.627333
! Fit after  self-cal, rms=0.825254Jy  sigma=14.316187
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.929 mas, bmaj=7.021 mas, bpa=1.277 degrees
! Estimated noise=0.638138 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.134496 Jy
! Component: 100  -  total flux cleaned = 0.169775 Jy
! Total flux subtracted in 100 components = 0.169775 Jy
! Clean residual min=-0.008054 max=0.013424 Jy/beam
! Clean residual mean=-0.000019 rms=0.001923 Jy/beam
! Combined flux in latest and established models = 0.169775 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.169775 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092421Jy  sigma=1.320203
! Fit after  self-cal, rms=0.092417Jy  sigma=1.319948
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0133036 Jy
! Component: 100  -  total flux cleaned = 0.0171081 Jy
! Total flux subtracted in 100 components = 0.0171081 Jy
! Clean residual min=-0.008457 max=0.008391 Jy/beam
! Clean residual mean=-0.000005 rms=0.001787 Jy/beam
! Combined flux in latest and established models = 0.186884 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 17 components and 0.186884 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089741Jy  sigma=1.280607
! Fit after  self-cal, rms=0.089731Jy  sigma=1.280327
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.539 mas, bmaj=8.503 mas, bpa=-0.7519 degrees
! Estimated noise=0.369046 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5, 1.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0086526 Jy
! Component: 100  -  total flux cleaned = 0.0140079 Jy
! Component: 150  -  total flux cleaned = 0.0176283 Jy
! Component: 200  -  total flux cleaned = 0.0201275 Jy
! Total flux subtracted in 200 components = 0.0201275 Jy
! Clean residual min=-0.006967 max=0.005520 Jy/beam
! Clean residual mean=0.000004 rms=0.001331 Jy/beam
! Combined flux in latest and established models = 0.207011 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 38 components and 0.207011 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088573Jy  sigma=1.264424
! Fit after  self-cal, rms=0.088511Jy  sigma=1.263345
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.539 x 8.503 at -0.7519 degrees (North through East)
! Clean map  min=-0.006348  max=0.17157 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.05     HN        1.04     KP        1.02     
!   LA        1.00     NL        1.04     OV        0.98     SC        1.13     
!   WZ        1.05     
! 
!  A total of 36 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        1.04     HN        1.01     KK        1.00     
!   KP        1.03     LA        0.99     NL        1.04     OV        1.01     
!   PT        1.05     SC        1.17     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.09     HN        1.05     KP        1.00     
!   LA        1.00     NL        1.01     OV        1.01     SC        1.05     
!   WZ        0.95     
! 
!  A total of 36 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        1.07     HN        1.03     KK        1.00     
!   KP        1.00     LA        1.00     NL        1.02     OV        1.01     
!   PT        1.06     SC        1.18     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.14     HN        1.03     KP        0.61     
!   LA        1.01     NL        0.71     OV        1.02     SC        0.58     
!   WZ        1.01     
! 
!  A total of 36 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     FD        1.13     HN        1.06     KK        1.02     
!   KP        0.55     LA        1.04     NL        0.76     OV        1.02     
!   PT        1.07     SC        0.65     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.09     HN        1.05     KP        1.06     
!   LA        1.01     NL        1.04     OV        1.02     SC        1.16     
!   WZ        1.02     
! 
!  A total of 36 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     FD        1.05     HN        1.05     KK        1.00     
!   KP        1.03     LA        1.02     NL        1.07     OV        1.03     
!   PT        1.07     SC        1.20     
! 
! 
! Fit before self-cal, rms=0.088511Jy  sigma=1.263345
! Fit after  self-cal, rms=0.063109Jy  sigma=1.031543
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.519 mas, bmaj=8.521 mas, bpa=-0.3959 degrees
! Estimated noise=0.369205 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (11, 2.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00260104 Jy
! Component: 100  -  total flux cleaned = 0.00269603 Jy
! Component: 150  -  total flux cleaned = 0.00256948 Jy
! Component: 200  -  total flux cleaned = 0.00245631 Jy
! Total flux subtracted in 200 components = 0.00245631 Jy
! Clean residual min=-0.001943 max=0.001856 Jy/beam
! Clean residual mean=-0.000002 rms=0.000468 Jy/beam
! Combined flux in latest and established models = 0.209467 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 59 components and 0.209467 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062979Jy  sigma=1.029654
! Fit after  self-cal, rms=0.063160Jy  sigma=1.027031
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063160Jy  sigma=1.027031
! Fit after  self-cal, rms=0.062644Jy  sigma=1.019331
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.511 mas, bmaj=8.507 mas, bpa=-0.3751 degrees
! Estimated noise=0.36919 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00110962 Jy
! Component: 100  -  total flux cleaned = 0.00118979 Jy
! Component: 150  -  total flux cleaned = 0.00118892 Jy
! Component: 200  -  total flux cleaned = 0.00112673 Jy
! Total flux subtracted in 200 components = 0.00112673 Jy
! Clean residual min=-0.001578 max=0.001613 Jy/beam
! Clean residual mean=0.000001 rms=0.000388 Jy/beam
! Combined flux in latest and established models = 0.210594 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 76 components and 0.210594 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062593Jy  sigma=1.018572
! Fit after  self-cal, rms=0.062584Jy  sigma=1.018464
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00025245 Jy
! Component: 100  -  total flux cleaned = 0.000195495 Jy
! Component: 150  -  total flux cleaned = 0.000222189 Jy
! Component: 200  -  total flux cleaned = 0.000221137 Jy
! Total flux subtracted in 200 components = 0.000221137 Jy
! Clean residual min=-0.001544 max=0.001595 Jy/beam
! Clean residual mean=0.000001 rms=0.000381 Jy/beam
! Combined flux in latest and established models = 0.210815 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 83 components and 0.210815 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062560Jy  sigma=1.018081
! Fit after  self-cal, rms=0.062559Jy  sigma=1.018056
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062559Jy  sigma=1.018056
! Fit after  self-cal, rms=0.062129Jy  sigma=1.012084
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.51 mas, bmaj=8.5 mas, bpa=-0.3378 degrees
! Estimated noise=0.369269 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000305207 Jy
! Component: 100  -  total flux cleaned = 0.000254849 Jy
! Component: 150  -  total flux cleaned = 0.000207529 Jy
! Component: 200  -  total flux cleaned = 0.000207985 Jy
! Total flux subtracted in 200 components = 0.000207985 Jy
! Clean residual min=-0.001482 max=0.001509 Jy/beam
! Clean residual mean=0.000006 rms=0.000345 Jy/beam
! Combined flux in latest and established models = 0.211023 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 94 components and 0.211023 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062105Jy  sigma=1.011745
! Fit after  self-cal, rms=0.062107Jy  sigma=1.011670
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (84.5, 56.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000346562 Jy
! Component: 100  -  total flux cleaned = 0.000168949 Jy
! Component: 150  -  total flux cleaned = 0.000275754 Jy
! Component: 200  -  total flux cleaned = 0.000275944 Jy
! Total flux subtracted in 200 components = 0.000275944 Jy
! Clean residual min=-0.001342 max=0.001276 Jy/beam
! Clean residual mean=0.000005 rms=0.000332 Jy/beam
! Combined flux in latest and established models = 0.211299 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 114 components and 0.211299 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062062Jy  sigma=1.011002
! Fit after  self-cal, rms=0.062061Jy  sigma=1.010976
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062061Jy  sigma=1.010976
! Fit after  self-cal, rms=0.062068Jy  sigma=1.010906
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.352 mas, bmaj=12.2 mas, bpa=-9.389 degrees
! Estimated noise=0.439302 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000206835 Jy
! Component: 100  -  total flux cleaned = 0.000150718 Jy
! Component: 150  -  total flux cleaned = 8.56933e-05 Jy
! Component: 200  -  total flux cleaned = 2.97782e-05 Jy
! Total flux subtracted in 200 components = 2.97782e-05 Jy
! Clean residual min=-0.001275 max=0.001506 Jy/beam
! Clean residual mean=0.000010 rms=0.000357 Jy/beam
! Combined flux in latest and established models = 0.211329 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 140 components and 0.211329 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062059Jy  sigma=1.010808
! Fit after  self-cal, rms=0.062060Jy  sigma=1.010792
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.73345e-05 Jy
! Component: 100  -  total flux cleaned = 1.10673e-05 Jy
! Component: 150  -  total flux cleaned = -1.12474e-05 Jy
! Component: 200  -  total flux cleaned = -3.22714e-05 Jy
! Total flux subtracted in 200 components = -3.22714e-05 Jy
! Clean residual min=-0.001253 max=0.001503 Jy/beam
! Clean residual mean=0.000010 rms=0.000353 Jy/beam
! Combined flux in latest and established models = 0.211297 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 162 components and 0.211297 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062056Jy  sigma=1.010746
! Fit after  self-cal, rms=0.062057Jy  sigma=1.010741
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.51 mas, bmaj=8.496 mas, bpa=-0.3008 degrees
! Estimated noise=0.369304 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.51 x 8.496 at -0.3008 degrees (North through East)
! Clean map  min=-0.0012246  max=0.16995 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.88 mas, bmaj=7.008 mas, bpa=2.05 degrees
! Estimated noise=0.641356 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.132896 Jy
! Component: 100  -  total flux cleaned = 0.168517 Jy
! Component: 150  -  total flux cleaned = 0.182866 Jy
! Component: 200  -  total flux cleaned = 0.190526 Jy
! Total flux subtracted in 200 components = 0.190526 Jy
! Clean residual min=-0.002889 max=0.004017 Jy/beam
! Clean residual mean=-0.000008 rms=0.000705 Jy/beam
! Combined flux in latest and established models = 0.190526 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.190526 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.51 mas, bmaj=8.496 mas, bpa=-0.3008 degrees
! Estimated noise=0.369304 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00677065 Jy
! Component: 100  -  total flux cleaned = 0.0111237 Jy
! Component: 150  -  total flux cleaned = 0.0140926 Jy
! Component: 200  -  total flux cleaned = 0.0162941 Jy
! Total flux subtracted in 200 components = 0.0162941 Jy
! Clean residual min=-0.001766 max=0.002013 Jy/beam
! Clean residual mean=0.000005 rms=0.000386 Jy/beam
! Combined flux in latest and established models = 0.20682 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 58 components and 0.20682 Jy
! Inverting map 
! Added new window around map position (-3.5, 8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00175707 Jy
! Component: 100  -  total flux cleaned = 0.00244705 Jy
! Component: 150  -  total flux cleaned = 0.00292742 Jy
! Component: 200  -  total flux cleaned = 0.00313294 Jy
! Total flux subtracted in 200 components = 0.00313294 Jy
! Clean residual min=-0.001504 max=0.001300 Jy/beam
! Clean residual mean=0.000005 rms=0.000340 Jy/beam
! Combined flux in latest and established models = 0.209953 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 85 components and 0.209953 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.352 mas, bmaj=12.2 mas, bpa=-9.389 degrees
! Estimated noise=0.439302 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000509156 Jy
! Component: 100  -  total flux cleaned = 0.000480811 Jy
! Component: 150  -  total flux cleaned = 0.000458597 Jy
! Component: 200  -  total flux cleaned = 0.000440226 Jy
! Total flux subtracted in 200 components = 0.000440226 Jy
! Clean residual min=-0.001325 max=0.001418 Jy/beam
! Clean residual mean=0.000010 rms=0.000354 Jy/beam
! Combined flux in latest and established models = 0.210393 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.73197e-07 Jy
! Component: 100  -  total flux cleaned = 1.73114e-06 Jy
! Component: 150  -  total flux cleaned = -1.2806e-05 Jy
! Component: 200  -  total flux cleaned = -2.63402e-05 Jy
! Total flux subtracted in 200 components = -2.63402e-05 Jy
! Clean residual min=-0.001334 max=0.001406 Jy/beam
! Clean residual mean=0.000009 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.210367 Jy
! Adding 67 model components to the UV plane model.
! The established model now contains 150 components and 0.210367 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.51 mas, bmaj=8.496 mas, bpa=-0.3008 degrees
! Estimated noise=0.369304 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000141595 Jy
! Component: 100  -  total flux cleaned = -7.89783e-05 Jy
! Component: 150  -  total flux cleaned = 3.52736e-05 Jy
! Component: 200  -  total flux cleaned = 0.000113239 Jy
! Total flux subtracted in 200 components = 0.000113239 Jy
! Clean residual min=-0.001331 max=0.001237 Jy/beam
! Clean residual mean=0.000005 rms=0.000323 Jy/beam
! Combined flux in latest and established models = 0.21048 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 168 components and 0.21048 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062049Jy  sigma=1.010667
! Fit after  self-cal, rms=0.062042Jy  sigma=1.010607
wmodel J0049+0237_S_map.mod
! Writing 168 model components to file: J0049+0237_S_map.mod
wobs   J0049+0237_S_uvs.fits
! Writing UV FITS file: J0049+0237_S_uvs.fits
wwins  J0049+0237_S_map.win
! wwins: Wrote 5 windows to J0049+0237_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000322152 Jy
! Component: 100  -  total flux cleaned = -0.000277489 Jy
! Component: 150  -  total flux cleaned = -0.000319818 Jy
! Component: 200  -  total flux cleaned = -0.000237718 Jy
! Component: 250  -  total flux cleaned = -0.000218196 Jy
! Component: 300  -  total flux cleaned = -0.000218315 Jy
! Component: 350  -  total flux cleaned = -0.000160657 Jy
! Component: 400  -  total flux cleaned = -0.000179617 Jy
! Component: 450  -  total flux cleaned = -0.000180013 Jy
! Component: 500  -  total flux cleaned = -0.000271167 Jy
! Component: 550  -  total flux cleaned = -0.000324852 Jy
! Component: 600  -  total flux cleaned = -0.000377907 Jy
! Component: 650  -  total flux cleaned = -0.000447469 Jy
! Component: 700  -  total flux cleaned = -0.000516263 Jy
! Component: 750  -  total flux cleaned = -0.000550414 Jy
! Component: 800  -  total flux cleaned = -0.000600843 Jy
! Component: 850  -  total flux cleaned = -0.000716271 Jy
! Component: 900  -  total flux cleaned = -0.000699807 Jy
! Component: 950  -  total flux cleaned = -0.000813022 Jy
! Component: 1000  -  total flux cleaned = -0.000828768 Jy
! Component: 1050  -  total flux cleaned = -0.000828754 Jy
! Component: 1100  -  total flux cleaned = -0.000876 Jy
! Component: 1150  -  total flux cleaned = -0.000938151 Jy
! Component: 1200  -  total flux cleaned = -0.000938011 Jy
! Component: 1250  -  total flux cleaned = -0.000999151 Jy
! Component: 1300  -  total flux cleaned = -0.0010293 Jy
! Component: 1350  -  total flux cleaned = -0.00105921 Jy
! Component: 1400  -  total flux cleaned = -0.0011037 Jy
! Component: 1450  -  total flux cleaned = -0.0011329 Jy
! Component: 1500  -  total flux cleaned = -0.00114757 Jy
! Component: 1550  -  total flux cleaned = -0.00119091 Jy
! Component: 1600  -  total flux cleaned = -0.00120539 Jy
! Component: 1650  -  total flux cleaned = -0.00121967 Jy
! Component: 1700  -  total flux cleaned = -0.00126226 Jy
! Component: 1750  -  total flux cleaned = -0.0012482 Jy
! Component: 1800  -  total flux cleaned = -0.00133188 Jy
! Component: 1850  -  total flux cleaned = -0.00133189 Jy
! Component: 1900  -  total flux cleaned = -0.00135934 Jy
! Component: 1950  -  total flux cleaned = -0.00138654 Jy
! Component: 2000  -  total flux cleaned = -0.0014271 Jy
! Component: 2050  -  total flux cleaned = -0.00144058 Jy
! Component: 2100  -  total flux cleaned = -0.00148064 Jy
! Component: 2150  -  total flux cleaned = -0.00148073 Jy
! Component: 2200  -  total flux cleaned = -0.00148074 Jy
! Component: 2250  -  total flux cleaned = -0.00149376 Jy
! Component: 2300  -  total flux cleaned = -0.00149383 Jy
! Component: 2350  -  total flux cleaned = -0.00148083 Jy
! Component: 2400  -  total flux cleaned = -0.00150658 Jy
! Component: 2450  -  total flux cleaned = -0.00145517 Jy
! Component: 2500  -  total flux cleaned = -0.00151908 Jy
! Component: 2550  -  total flux cleaned = -0.00148091 Jy
! Component: 2600  -  total flux cleaned = -0.00148091 Jy
! Component: 2650  -  total flux cleaned = -0.00145568 Jy
! Component: 2700  -  total flux cleaned = -0.00146823 Jy
! Component: 2750  -  total flux cleaned = -0.0014434 Jy
! Component: 2800  -  total flux cleaned = -0.00140639 Jy
! Component: 2850  -  total flux cleaned = -0.0013696 Jy
! Component: 2900  -  total flux cleaned = -0.00135739 Jy
! Component: 2950  -  total flux cleaned = -0.00133316 Jy
! Component: 3000  -  total flux cleaned = -0.00134523 Jy
! Component: 3050  -  total flux cleaned = -0.00135732 Jy
! Component: 3100  -  total flux cleaned = -0.00135722 Jy
! Component: 3150  -  total flux cleaned = -0.00135724 Jy
! Component: 3200  -  total flux cleaned = -0.00135706 Jy
! Component: 3250  -  total flux cleaned = -0.00138074 Jy
! Component: 3300  -  total flux cleaned = -0.00132213 Jy
! Component: 3350  -  total flux cleaned = -0.00131037 Jy
! Component: 3400  -  total flux cleaned = -0.00132195 Jy
! Component: 3450  -  total flux cleaned = -0.00127564 Jy
! Component: 3500  -  total flux cleaned = -0.00129871 Jy
! Component: 3550  -  total flux cleaned = -0.00126433 Jy
! Component: 3600  -  total flux cleaned = -0.00125286 Jy
! Component: 3650  -  total flux cleaned = -0.00132088 Jy
! Component: 3700  -  total flux cleaned = -0.00126434 Jy
! Component: 3750  -  total flux cleaned = -0.00126433 Jy
! Component: 3800  -  total flux cleaned = -0.00120845 Jy
! Component: 3850  -  total flux cleaned = -0.00125294 Jy
! Component: 3900  -  total flux cleaned = -0.00123077 Jy
! Component: 3950  -  total flux cleaned = -0.0012197 Jy
! Component: 4000  -  total flux cleaned = -0.00121974 Jy
! Component: 4050  -  total flux cleaned = -0.00120878 Jy
! Total flux subtracted in 4096 components = -0.0011652 Jy
! Clean residual min=-0.000575 max=0.000666 Jy/beam
! Clean residual mean=0.000004 rms=0.000203 Jy/beam
! Combined flux in latest and established models = 0.209315 Jy
keep
! Adding 292 model components to the UV plane model.
! The established model now contains 460 components and 0.209315 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv118_uvs/J0049+0237_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.51 x 8.496 at -0.3008 degrees (North through East)
! Clean map  min=-0.0013455  max=0.17032 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv118_uvs/J0049+0237_S_map.fits
wmodel /scr/pima/rv118_uvs/J0049+0237_S_map.mod
! Writing 460 model components to file: /scr/pima/rv118_uvs/J0049+0237_S_map.mod
wobs   /scr/pima/rv118_uvs/J0049+0237_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv118_uvs/J0049+0237_S_uvs.fits
wwins  /scr/pima/rv118_uvs/J0049+0237_S_map.win
! wwins: Wrote 6 windows to /scr/pima/rv118_uvs/J0049+0237_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.170324 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000202343 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.356398 0.356398 0.712796 1.42559 2.85118 5.70237 11.4047 22.8095 45.6189 91.2379
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.17 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  841.755 
quit
! Quitting program
! Log file /scr/pima/rv118_uvs/J0049+0237_S_dfm.log closed on Sun Dec 10 00:07:10 2017