! Started logfile: /scr/pima/rv118_uvs/J0040-0146_S_dfm.log on Sun Dec 10 00:07:01 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.23275
obs     /scr/pima/rv118_uvs/J0040-0146_S_uva.fits
! Reading UV FITS file: /scr/pima/rv118_uvs/J0040-0146_S_uva.fits
! AN table 1: 44 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.996212 visibilities/baseline/integration-bin.
! Found source: J0040-0146
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23275e+09        8e+06          1        8e+06
!  02        2  2.26275e+09        8e+06          1        8e+06
!  03        3  2.35275e+09        8e+06          1        8e+06
!  04        4  2.37275e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 6312 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0040-0146_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.152503Jy  sigma=18.151703
! Fit after  self-cal, rms=0.661708Jy  sigma=10.703683
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.487 mas, bmaj=9.842 mas, bpa=20.16 degrees
! Estimated noise=0.860041 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.279938 Jy
! Component: 100  -  total flux cleaned = 0.390262 Jy
! Total flux subtracted in 100 components = 0.390262 Jy
! Clean residual min=-0.020763 max=0.047233 Jy/beam
! Clean residual mean=0.000026 rms=0.006348 Jy/beam
! Combined flux in latest and established models = 0.390262 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.390262 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.322219Jy  sigma=2.658015
! Fit after  self-cal, rms=0.322011Jy  sigma=2.652119
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0519258 Jy
! Component: 100  -  total flux cleaned = 0.0826313 Jy
! Total flux subtracted in 100 components = 0.0826313 Jy
! Clean residual min=-0.014957 max=0.033701 Jy/beam
! Clean residual mean=0.000015 rms=0.004489 Jy/beam
! Combined flux in latest and established models = 0.472894 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 25 components and 0.472894 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.301085Jy  sigma=2.266340
! Fit after  self-cal, rms=0.301012Jy  sigma=2.263488
! Inverting map 
! Added new window around map position (-8.5, 11).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0321813 Jy
! Component: 100  -  total flux cleaned = 0.0507494 Jy
! Total flux subtracted in 100 components = 0.0507494 Jy
! Clean residual min=-0.014303 max=0.018323 Jy/beam
! Clean residual mean=0.000009 rms=0.003478 Jy/beam
! Combined flux in latest and established models = 0.523643 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 38 components and 0.523643 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.292644Jy  sigma=2.107699
! Fit after  self-cal, rms=0.292331Jy  sigma=2.098321
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.238 mas, bmaj=10.27 mas, bpa=17.52 degrees
! Estimated noise=0.552018 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.027035 Jy
! Component: 100  -  total flux cleaned = 0.0440192 Jy
! Component: 150  -  total flux cleaned = 0.0559096 Jy
! Component: 200  -  total flux cleaned = 0.0644162 Jy
! Total flux subtracted in 200 components = 0.0644162 Jy
! Clean residual min=-0.016120 max=0.018479 Jy/beam
! Clean residual mean=0.000005 rms=0.003975 Jy/beam
! Combined flux in latest and established models = 0.588059 Jy
! Performing phase self-cal
! Adding 55 model components to the UV plane model.
! The established model now contains 83 components and 0.588059 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.284631Jy  sigma=2.042242
! Fit after  self-cal, rms=0.284490Jy  sigma=2.038411
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.238 x 10.27 at 17.52 degrees (North through East)
! Clean map  min=-0.015733  max=0.36797 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.04     KP        1.02     
!   LA        0.99     NL        1.09     OV        1.02     PT        1.05     
!   SC        1.13     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        1.05     KP        1.03     
!   LA        1.01     NL        1.04     OV        1.01     PT        1.07     
!   SC        1.10     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.08     HN        1.08     KP        0.54     
!   LA        1.04     NL        0.40     OV        1.02     PT        1.09     
!   SC        0.72     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        1.08     KP        1.06     
!   LA        1.02     NL        1.04     OV        1.04     PT        1.11     
!   SC        1.14     
! 
! 
! Fit before self-cal, rms=0.284490Jy  sigma=2.038411
! Fit after  self-cal, rms=0.073763Jy  sigma=1.138348
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.226 mas, bmaj=10.29 mas, bpa=17.78 degrees
! Estimated noise=0.54704 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-8, 0.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00368608 Jy
! Component: 100  -  total flux cleaned = 0.00420633 Jy
! Component: 150  -  total flux cleaned = 0.00381909 Jy
! Component: 200  -  total flux cleaned = 0.00382137 Jy
! Total flux subtracted in 200 components = 0.00382137 Jy
! Clean residual min=-0.004996 max=0.004092 Jy/beam
! Clean residual mean=0.000010 rms=0.001134 Jy/beam
! Combined flux in latest and established models = 0.591881 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 112 components and 0.591881 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072953Jy  sigma=1.123867
! Fit after  self-cal, rms=0.072923Jy  sigma=1.119491
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072923Jy  sigma=1.119491
! Fit after  self-cal, rms=0.068836Jy  sigma=1.082294
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.21 mas, bmaj=10.26 mas, bpa=17.64 degrees
! Estimated noise=0.545302 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000354424 Jy
! Component: 100  -  total flux cleaned = 0.000346113 Jy
! Component: 150  -  total flux cleaned = 0.000338086 Jy
! Component: 200  -  total flux cleaned = 0.00040021 Jy
! Total flux subtracted in 200 components = 0.00040021 Jy
! Clean residual min=-0.003078 max=0.003162 Jy/beam
! Clean residual mean=0.000000 rms=0.000749 Jy/beam
! Combined flux in latest and established models = 0.592281 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 133 components and 0.592281 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068667Jy  sigma=1.078733
! Fit after  self-cal, rms=0.068613Jy  sigma=1.078436
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000108637 Jy
! Component: 100  -  total flux cleaned = -5.55199e-05 Jy
! Component: 150  -  total flux cleaned = -6.82888e-06 Jy
! Component: 200  -  total flux cleaned = 3.94496e-05 Jy
! Total flux subtracted in 200 components = 3.94496e-05 Jy
! Clean residual min=-0.002939 max=0.003049 Jy/beam
! Clean residual mean=0.000000 rms=0.000722 Jy/beam
! Combined flux in latest and established models = 0.592321 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 147 components and 0.592321 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068546Jy  sigma=1.077067
! Fit after  self-cal, rms=0.068529Jy  sigma=1.076979
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068529Jy  sigma=1.076979
! Fit after  self-cal, rms=0.068425Jy  sigma=1.076326
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.201 mas, bmaj=10.25 mas, bpa=17.67 degrees
! Estimated noise=0.544874 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000297652 Jy
! Component: 100  -  total flux cleaned = -0.000108214 Jy
! Component: 150  -  total flux cleaned = -2.30815e-05 Jy
! Component: 200  -  total flux cleaned = 1.61397e-05 Jy
! Total flux subtracted in 200 components = 1.61397e-05 Jy
! Clean residual min=-0.002790 max=0.002922 Jy/beam
! Clean residual mean=-0.000000 rms=0.000695 Jy/beam
! Combined flux in latest and established models = 0.592337 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 158 components and 0.592337 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068373Jy  sigma=1.075257
! Fit after  self-cal, rms=0.068363Jy  sigma=1.075191
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.72941e-05 Jy
! Component: 100  -  total flux cleaned = 0.000164587 Jy
! Component: 150  -  total flux cleaned = 0.000164386 Jy
! Component: 200  -  total flux cleaned = 0.000164198 Jy
! Total flux subtracted in 200 components = 0.000164198 Jy
! Clean residual min=-0.002705 max=0.002854 Jy/beam
! Clean residual mean=-0.000000 rms=0.000682 Jy/beam
! Combined flux in latest and established models = 0.592501 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 166 components and 0.592501 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068332Jy  sigma=1.074555
! Fit after  self-cal, rms=0.068324Jy  sigma=1.074516
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068324Jy  sigma=1.074516
! Fit after  self-cal, rms=0.068202Jy  sigma=1.073942
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.997 mas, bmaj=12.66 mas, bpa=9.267 degrees
! Estimated noise=0.631309 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000697212 Jy
! Component: 100  -  total flux cleaned = 0.000871105 Jy
! Component: 150  -  total flux cleaned = 0.00102152 Jy
! Component: 200  -  total flux cleaned = 0.00117798 Jy
! Total flux subtracted in 200 components = 0.00117798 Jy
! Clean residual min=-0.002821 max=0.002910 Jy/beam
! Clean residual mean=-0.000000 rms=0.000745 Jy/beam
! Combined flux in latest and established models = 0.593679 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 184 components and 0.593679 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068194Jy  sigma=1.073829
! Fit after  self-cal, rms=0.068191Jy  sigma=1.073802
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000158983 Jy
! Component: 100  -  total flux cleaned = 0.000241139 Jy
! Component: 150  -  total flux cleaned = 0.000315755 Jy
! Component: 200  -  total flux cleaned = 0.000386892 Jy
! Total flux subtracted in 200 components = 0.000386892 Jy
! Clean residual min=-0.002779 max=0.002959 Jy/beam
! Clean residual mean=0.000000 rms=0.000735 Jy/beam
! Combined flux in latest and established models = 0.594066 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 195 components and 0.594066 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068186Jy  sigma=1.073746
! Fit after  self-cal, rms=0.068185Jy  sigma=1.073731
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.196 mas, bmaj=10.25 mas, bpa=17.69 degrees
! Estimated noise=0.544594 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.196 x 10.25 at 17.69 degrees (North through East)
! Clean map  min=-0.0026523  max=0.36297 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.415 mas, bmaj=9.865 mas, bpa=20.38 degrees
! Estimated noise=0.856237 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.280879 Jy
! Component: 100  -  total flux cleaned = 0.393748 Jy
! Component: 150  -  total flux cleaned = 0.451278 Jy
! Component: 200  -  total flux cleaned = 0.489246 Jy
! Total flux subtracted in 200 components = 0.489246 Jy
! Clean residual min=-0.009155 max=0.020614 Jy/beam
! Clean residual mean=0.000010 rms=0.002952 Jy/beam
! Combined flux in latest and established models = 0.489246 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.489246 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.196 mas, bmaj=10.25 mas, bpa=17.69 degrees
! Estimated noise=0.544594 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0355245 Jy
! Component: 100  -  total flux cleaned = 0.056684 Jy
! Component: 150  -  total flux cleaned = 0.0703932 Jy
! Component: 200  -  total flux cleaned = 0.0799925 Jy
! Total flux subtracted in 200 components = 0.0799925 Jy
! Clean residual min=-0.004282 max=0.005788 Jy/beam
! Clean residual mean=0.000002 rms=0.001171 Jy/beam
! Combined flux in latest and established models = 0.569238 Jy
! Adding 61 model components to the UV plane model.
! The established model now contains 77 components and 0.569238 Jy
! Inverting map 
! Added new window around map position (-35, 44).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00701852 Jy
! Component: 100  -  total flux cleaned = 0.0122144 Jy
! Component: 150  -  total flux cleaned = 0.0161454 Jy
! Component: 200  -  total flux cleaned = 0.0183627 Jy
! Total flux subtracted in 200 components = 0.0183627 Jy
! Clean residual min=-0.003461 max=0.003504 Jy/beam
! Clean residual mean=0.000001 rms=0.000746 Jy/beam
! Combined flux in latest and established models = 0.587601 Jy
! Adding 54 model components to the UV plane model.
! The established model now contains 124 components and 0.587601 Jy
! Inverting map 
! Added new window around map position (-23, 34.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00225856 Jy
! Component: 100  -  total flux cleaned = 0.00332068 Jy
! Component: 150  -  total flux cleaned = 0.00432586 Jy
! Component: 200  -  total flux cleaned = 0.00499353 Jy
! Total flux subtracted in 200 components = 0.00499353 Jy
! Clean residual min=-0.003057 max=0.002334 Jy/beam
! Clean residual mean=0.000000 rms=0.000629 Jy/beam
! Combined flux in latest and established models = 0.592595 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 158 components and 0.592595 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.997 mas, bmaj=12.66 mas, bpa=9.267 degrees
! Estimated noise=0.631309 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00195921 Jy
! Component: 100  -  total flux cleaned = 0.00334176 Jy
! Component: 150  -  total flux cleaned = 0.00384669 Jy
! Component: 200  -  total flux cleaned = 0.00413496 Jy
! Total flux subtracted in 200 components = 0.00413496 Jy
! Clean residual min=-0.002289 max=0.001835 Jy/beam
! Clean residual mean=0.000001 rms=0.000590 Jy/beam
! Combined flux in latest and established models = 0.59673 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000228397 Jy
! Component: 100  -  total flux cleaned = 0.000441247 Jy
! Component: 150  -  total flux cleaned = 0.000639446 Jy
! Component: 200  -  total flux cleaned = 0.000825456 Jy
! Total flux subtracted in 200 components = 0.000825456 Jy
! Clean residual min=-0.002267 max=0.001792 Jy/beam
! Clean residual mean=0.000001 rms=0.000569 Jy/beam
! Combined flux in latest and established models = 0.597555 Jy
! Adding 64 model components to the UV plane model.
! The established model now contains 214 components and 0.597555 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.196 mas, bmaj=10.25 mas, bpa=17.69 degrees
! Estimated noise=0.544594 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00107785 Jy
! Component: 100  -  total flux cleaned = -0.00113483 Jy
! Component: 150  -  total flux cleaned = -0.00113633 Jy
! Component: 200  -  total flux cleaned = -0.00109157 Jy
! Total flux subtracted in 200 components = -0.00109157 Jy
! Clean residual min=-0.002463 max=0.002015 Jy/beam
! Clean residual mean=0.000000 rms=0.000561 Jy/beam
! Combined flux in latest and established models = 0.596464 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 232 components and 0.596464 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068035Jy  sigma=1.070049
! Fit after  self-cal, rms=0.067999Jy  sigma=1.069653
wmodel J0040-0146_S_map.mod
! Writing 232 model components to file: J0040-0146_S_map.mod
wobs   J0040-0146_S_uvs.fits
! Writing UV FITS file: J0040-0146_S_uvs.fits
wwins  J0040-0146_S_map.win
! wwins: Wrote 5 windows to J0040-0146_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00105933 Jy
! Component: 100  -  total flux cleaned = -0.00180984 Jy
! Component: 150  -  total flux cleaned = -0.002162 Jy
! Component: 200  -  total flux cleaned = -0.00239594 Jy
! Component: 250  -  total flux cleaned = -0.00249229 Jy
! Component: 300  -  total flux cleaned = -0.00264826 Jy
! Component: 350  -  total flux cleaned = -0.00270856 Jy
! Component: 400  -  total flux cleaned = -0.00270876 Jy
! Component: 450  -  total flux cleaned = -0.00270919 Jy
! Component: 500  -  total flux cleaned = -0.00276575 Jy
! Component: 550  -  total flux cleaned = -0.0027106 Jy
! Component: 600  -  total flux cleaned = -0.00268452 Jy
! Component: 650  -  total flux cleaned = -0.00271173 Jy
! Component: 700  -  total flux cleaned = -0.00278983 Jy
! Component: 750  -  total flux cleaned = -0.0028409 Jy
! Component: 800  -  total flux cleaned = -0.00294095 Jy
! Component: 850  -  total flux cleaned = -0.00296543 Jy
! Component: 900  -  total flux cleaned = -0.00311064 Jy
! Component: 950  -  total flux cleaned = -0.00315876 Jy
! Component: 1000  -  total flux cleaned = -0.00329958 Jy
! Component: 1050  -  total flux cleaned = -0.0033693 Jy
! Component: 1100  -  total flux cleaned = -0.00343785 Jy
! Component: 1150  -  total flux cleaned = -0.00357226 Jy
! Component: 1200  -  total flux cleaned = -0.00363871 Jy
! Component: 1250  -  total flux cleaned = -0.00366063 Jy
! Component: 1300  -  total flux cleaned = -0.00368232 Jy
! Component: 1350  -  total flux cleaned = -0.0037039 Jy
! Component: 1400  -  total flux cleaned = -0.00376696 Jy
! Component: 1450  -  total flux cleaned = -0.00376692 Jy
! Component: 1500  -  total flux cleaned = -0.00378729 Jy
! Component: 1550  -  total flux cleaned = -0.00376728 Jy
! Component: 1600  -  total flux cleaned = -0.00374726 Jy
! Component: 1650  -  total flux cleaned = -0.00372739 Jy
! Component: 1700  -  total flux cleaned = -0.00364912 Jy
! Component: 1750  -  total flux cleaned = -0.00361053 Jy
! Component: 1800  -  total flux cleaned = -0.00355347 Jy
! Component: 1850  -  total flux cleaned = -0.00359135 Jy
! Component: 1900  -  total flux cleaned = -0.00353509 Jy
! Component: 1950  -  total flux cleaned = -0.00349831 Jy
! Component: 2000  -  total flux cleaned = -0.00340641 Jy
! Component: 2050  -  total flux cleaned = -0.00340625 Jy
! Component: 2100  -  total flux cleaned = -0.00335236 Jy
! Component: 2150  -  total flux cleaned = -0.00331715 Jy
! Component: 2200  -  total flux cleaned = -0.00337038 Jy
! Component: 2250  -  total flux cleaned = -0.00324766 Jy
! Component: 2300  -  total flux cleaned = -0.00323048 Jy
! Component: 2350  -  total flux cleaned = -0.00321342 Jy
! Component: 2400  -  total flux cleaned = -0.00314514 Jy
! Component: 2450  -  total flux cleaned = -0.00306073 Jy
! Component: 2500  -  total flux cleaned = -0.0030776 Jy
! Component: 2550  -  total flux cleaned = -0.00301113 Jy
! Component: 2600  -  total flux cleaned = -0.00292903 Jy
! Component: 2650  -  total flux cleaned = -0.00292912 Jy
! Component: 2700  -  total flux cleaned = -0.00291287 Jy
! Component: 2750  -  total flux cleaned = -0.00284836 Jy
! Component: 2800  -  total flux cleaned = -0.00284834 Jy
! Component: 2850  -  total flux cleaned = -0.00272184 Jy
! Component: 2900  -  total flux cleaned = -0.00269058 Jy
! Component: 2950  -  total flux cleaned = -0.00267487 Jy
! Component: 3000  -  total flux cleaned = -0.00264408 Jy
! Component: 3050  -  total flux cleaned = -0.00262875 Jy
! Component: 3100  -  total flux cleaned = -0.00256787 Jy
! Component: 3150  -  total flux cleaned = -0.00249248 Jy
! Component: 3200  -  total flux cleaned = -0.00241743 Jy
! Component: 3250  -  total flux cleaned = -0.0023283 Jy
! Component: 3300  -  total flux cleaned = -0.00229876 Jy
! Component: 3350  -  total flux cleaned = -0.00225479 Jy
! Component: 3400  -  total flux cleaned = -0.00219662 Jy
! Component: 3450  -  total flux cleaned = -0.00216764 Jy
! Component: 3500  -  total flux cleaned = -0.00205268 Jy
! Component: 3550  -  total flux cleaned = -0.00200994 Jy
! Component: 3600  -  total flux cleaned = -0.0019392 Jy
! Component: 3650  -  total flux cleaned = -0.00186902 Jy
! Component: 3700  -  total flux cleaned = -0.0017572 Jy
! Component: 3750  -  total flux cleaned = -0.00168789 Jy
! Component: 3800  -  total flux cleaned = -0.00167412 Jy
! Component: 3850  -  total flux cleaned = -0.00160559 Jy
! Component: 3900  -  total flux cleaned = -0.00153751 Jy
! Component: 3950  -  total flux cleaned = -0.00151039 Jy
! Component: 4000  -  total flux cleaned = -0.00145648 Jy
! Component: 4050  -  total flux cleaned = -0.00132285 Jy
! Total flux subtracted in 4096 components = -0.00133617 Jy
! Clean residual min=-0.000715 max=0.000824 Jy/beam
! Clean residual mean=0.000000 rms=0.000254 Jy/beam
! Combined flux in latest and established models = 0.595128 Jy
keep
! Adding 278 model components to the UV plane model.
! The established model now contains 510 components and 0.595128 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv118_uvs/J0040-0146_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.196 x 10.25 at 17.69 degrees (North through East)
! Clean map  min=-0.0017758  max=0.36457 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv118_uvs/J0040-0146_S_map.fits
wmodel /scr/pima/rv118_uvs/J0040-0146_S_map.mod
! Writing 510 model components to file: /scr/pima/rv118_uvs/J0040-0146_S_map.mod
wobs   /scr/pima/rv118_uvs/J0040-0146_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv118_uvs/J0040-0146_S_uvs.fits
wwins  /scr/pima/rv118_uvs/J0040-0146_S_map.win
! wwins: Wrote 6 windows to /scr/pima/rv118_uvs/J0040-0146_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.36457 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000252994 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.208185 0.208185 0.41637 0.83274 1.66548 3.33096 6.66192 13.3238 26.6477 53.2953
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.364 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1441.03 
quit
! Quitting program
! Log file /scr/pima/rv118_uvs/J0040-0146_S_dfm.log closed on Sun Dec 10 00:07:05 2017