! Started logfile: /scr/pima/rv118_uvs/J0012-3954_X_dfm.log on Sun Dec 10 00:06:05 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv118_uvs/J0012-3954_X_uva.fits ! Reading UV FITS file: /scr/pima/rv118_uvs/J0012-3954_X_uva.fits ! AN table 1: 44 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.99026 visibilities/baseline/integration-bin. ! Found source: J0012-3954 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 3660 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0012-3954_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.071592Jy sigma=15.317550 ! Fit after self-cal, rms=0.637481Jy sigma=8.431931 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7374 mas, bmaj=3.853 mas, bpa=17.32 degrees ! Estimated noise=1.62405 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.282188 Jy ! Component: 100 - total flux cleaned = 0.347688 Jy ! Total flux subtracted in 100 components = 0.347688 Jy ! Clean residual min=-0.018175 max=0.032101 Jy/beam ! Clean residual mean=-0.000035 rms=0.006149 Jy/beam ! Combined flux in latest and established models = 0.347688 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.347688 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127111Jy sigma=1.734837 ! Fit after self-cal, rms=0.127105Jy sigma=1.734723 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.055 mas, bmaj=4.783 mas, bpa=16.26 degrees ! Estimated noise=0.858609 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0617187 Jy ! Component: 100 - total flux cleaned = 0.094957 Jy ! Component: 150 - total flux cleaned = 0.113901 Jy ! Component: 200 - total flux cleaned = 0.124978 Jy ! Total flux subtracted in 200 components = 0.124978 Jy ! Clean residual min=-0.015332 max=0.016667 Jy/beam ! Clean residual mean=-0.000000 rms=0.004155 Jy/beam ! Combined flux in latest and established models = 0.472666 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 47 components and 0.472666 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100542Jy sigma=1.162727 ! Fit after self-cal, rms=0.100544Jy sigma=1.161738 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.055 x 4.783 at 16.26 degrees (North through East) ! Clean map min=-0.014722 max=0.35161 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.93 KP 0.99 LA 0.97 NL 1.41 ! OV 0.96 PT 1.02 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.93 KP 0.98 LA 0.98 NL 1.44 ! OV 0.95 PT 1.02 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.94 KP 0.99 LA 0.98 NL 1.42 ! OV 0.94 PT 1.01 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 0.94 KP 0.98 LA 0.98 NL 1.43 ! OV 0.93 PT 1.03 SC 1.05 ! ! ! Fit before self-cal, rms=0.100544Jy sigma=1.161738 ! Fit after self-cal, rms=0.102459Jy sigma=0.983597 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.056 mas, bmaj=5.001 mas, bpa=16.47 degrees ! Estimated noise=0.878117 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00586718 Jy ! Component: 100 - total flux cleaned = -0.00583468 Jy ! Component: 150 - total flux cleaned = -0.00610359 Jy ! Component: 200 - total flux cleaned = -0.00635503 Jy ! Total flux subtracted in 200 components = -0.00635503 Jy ! Clean residual min=-0.009062 max=0.009674 Jy/beam ! Clean residual mean=0.000018 rms=0.002133 Jy/beam ! Combined flux in latest and established models = 0.466311 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 61 components and 0.466311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099777Jy sigma=0.968059 ! Fit after self-cal, rms=0.099990Jy sigma=0.967676 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099990Jy sigma=0.967676 ! Fit after self-cal, rms=0.098082Jy sigma=0.912804 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.059 mas, bmaj=4.971 mas, bpa=16.3 degrees ! Estimated noise=0.874827 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00366857 Jy ! Component: 100 - total flux cleaned = -0.00419923 Jy ! Component: 150 - total flux cleaned = -0.00451606 Jy ! Component: 200 - total flux cleaned = -0.00494188 Jy ! Total flux subtracted in 200 components = -0.00494188 Jy ! Clean residual min=-0.006221 max=0.004891 Jy/beam ! Clean residual mean=0.000002 rms=0.001109 Jy/beam ! Combined flux in latest and established models = 0.461369 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 68 components and 0.461369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097356Jy sigma=0.903688 ! Fit after self-cal, rms=0.097371Jy sigma=0.903568 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000272041 Jy ! Component: 100 - total flux cleaned = -0.000622307 Jy ! Component: 150 - total flux cleaned = -0.000830052 Jy ! Component: 200 - total flux cleaned = -0.00102076 Jy ! Total flux subtracted in 200 components = -0.00102076 Jy ! Clean residual min=-0.005605 max=0.004582 Jy/beam ! Clean residual mean=0.000004 rms=0.001049 Jy/beam ! Combined flux in latest and established models = 0.460348 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 71 components and 0.460348 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097113Jy sigma=0.899519 ! Fit after self-cal, rms=0.097100Jy sigma=0.899495 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097100Jy sigma=0.899495 ! Fit after self-cal, rms=0.099693Jy sigma=0.896802 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.062 mas, bmaj=4.975 mas, bpa=16.26 degrees ! Estimated noise=0.874401 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00257557 Jy ! Component: 100 - total flux cleaned = -0.00294178 Jy ! Component: 150 - total flux cleaned = -0.00310207 Jy ! Component: 200 - total flux cleaned = -0.00332092 Jy ! Total flux subtracted in 200 components = -0.00332092 Jy ! Clean residual min=-0.004981 max=0.004092 Jy/beam ! Clean residual mean=-0.000002 rms=0.000933 Jy/beam ! Combined flux in latest and established models = 0.457027 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 76 components and 0.457027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099452Jy sigma=0.894268 ! Fit after self-cal, rms=0.099451Jy sigma=0.894246 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000142146 Jy ! Component: 100 - total flux cleaned = -0.000260987 Jy ! Component: 150 - total flux cleaned = -0.00031761 Jy ! Component: 200 - total flux cleaned = -0.000423546 Jy ! Total flux subtracted in 200 components = -0.000423546 Jy ! Clean residual min=-0.004694 max=0.004004 Jy/beam ! Clean residual mean=-0.000002 rms=0.000917 Jy/beam ! Combined flux in latest and established models = 0.456604 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 80 components and 0.456604 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099361Jy sigma=0.893170 ! Fit after self-cal, rms=0.099354Jy sigma=0.893156 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099354Jy sigma=0.893156 ! Fit after self-cal, rms=0.100258Jy sigma=0.892463 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.859 mas, bmaj=10.43 mas, bpa=0.3094 degrees ! Estimated noise=0.963902 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00121375 Jy ! Component: 100 - total flux cleaned = -0.0013449 Jy ! Component: 150 - total flux cleaned = -0.00140554 Jy ! Component: 200 - total flux cleaned = -0.00146276 Jy ! Total flux subtracted in 200 components = -0.00146276 Jy ! Clean residual min=-0.002958 max=0.002485 Jy/beam ! Clean residual mean=-0.000006 rms=0.000769 Jy/beam ! Combined flux in latest and established models = 0.455141 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 82 components and 0.455141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100197Jy sigma=0.891994 ! Fit after self-cal, rms=0.100200Jy sigma=0.891939 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000232418 Jy ! Component: 100 - total flux cleaned = -0.00023431 Jy ! Component: 150 - total flux cleaned = -0.000252886 Jy ! Component: 200 - total flux cleaned = -0.0002986 Jy ! Total flux subtracted in 200 components = -0.0002986 Jy ! Clean residual min=-0.002930 max=0.002446 Jy/beam ! Clean residual mean=-0.000005 rms=0.000767 Jy/beam ! Combined flux in latest and established models = 0.454842 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 82 components and 0.454842 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100169Jy sigma=0.891735 ! Fit after self-cal, rms=0.100166Jy sigma=0.891703 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.064 mas, bmaj=4.989 mas, bpa=16.25 degrees ! Estimated noise=0.87451 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.064 x 4.989 at 16.25 degrees (North through East) ! Clean map min=-0.0041875 max=0.36403 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7304 mas, bmaj=3.916 mas, bpa=17.38 degrees ! Estimated noise=1.68047 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.291897 Jy ! Component: 100 - total flux cleaned = 0.358021 Jy ! Component: 150 - total flux cleaned = 0.387394 Jy ! Component: 200 - total flux cleaned = 0.40552 Jy ! Total flux subtracted in 200 components = 0.40552 Jy ! Clean residual min=-0.007216 max=0.010458 Jy/beam ! Clean residual mean=-0.000018 rms=0.002168 Jy/beam ! Combined flux in latest and established models = 0.40552 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.40552 Jy ! Inverting map and beam ! Estimated beam: bmin=1.064 mas, bmaj=4.989 mas, bpa=16.25 degrees ! Estimated noise=0.87451 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0199971 Jy ! Component: 100 - total flux cleaned = 0.0303301 Jy ! Component: 150 - total flux cleaned = 0.0359254 Jy ! Component: 200 - total flux cleaned = 0.039033 Jy ! Total flux subtracted in 200 components = 0.039033 Jy ! Clean residual min=-0.003886 max=0.006110 Jy/beam ! Clean residual mean=0.000013 rms=0.001125 Jy/beam ! Combined flux in latest and established models = 0.444553 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 51 components and 0.444553 Jy ! Inverting map ! Added new window around map position (2.2, 1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00536004 Jy ! Component: 100 - total flux cleaned = 0.00573325 Jy ! Component: 150 - total flux cleaned = 0.00605126 Jy ! Component: 200 - total flux cleaned = 0.00643582 Jy ! Total flux subtracted in 200 components = 0.00643582 Jy ! Clean residual min=-0.003441 max=0.004257 Jy/beam ! Clean residual mean=0.000003 rms=0.000877 Jy/beam ! Combined flux in latest and established models = 0.450989 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 70 components and 0.450989 Jy ! Inverting map ! Added new window around map position (-3.2, 3.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00213308 Jy ! Component: 100 - total flux cleaned = 0.00258317 Jy ! Component: 150 - total flux cleaned = 0.00250538 Jy ! Component: 200 - total flux cleaned = 0.00244771 Jy ! Total flux subtracted in 200 components = 0.00244771 Jy ! Clean residual min=-0.003041 max=0.002996 Jy/beam ! Clean residual mean=-0.000001 rms=0.000755 Jy/beam ! Combined flux in latest and established models = 0.453437 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 90 components and 0.453437 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.859 mas, bmaj=10.43 mas, bpa=0.3094 degrees ! Estimated noise=0.963902 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000396076 Jy ! Component: 100 - total flux cleaned = 0.000318381 Jy ! Component: 150 - total flux cleaned = 0.000212171 Jy ! Component: 200 - total flux cleaned = 0.000212242 Jy ! Total flux subtracted in 200 components = 0.000212242 Jy ! Clean residual min=-0.002594 max=0.002508 Jy/beam ! Clean residual mean=-0.000002 rms=0.000739 Jy/beam ! Combined flux in latest and established models = 0.453649 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.92738e-07 Jy ! Component: 100 - total flux cleaned = 1.83974e-06 Jy ! Component: 150 - total flux cleaned = 4.85888e-05 Jy ! Component: 200 - total flux cleaned = 6.98341e-05 Jy ! Total flux subtracted in 200 components = 6.98341e-05 Jy ! Clean residual min=-0.002577 max=0.002464 Jy/beam ! Clean residual mean=-0.000002 rms=0.000732 Jy/beam ! Combined flux in latest and established models = 0.453719 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 124 components and 0.453719 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.064 mas, bmaj=4.989 mas, bpa=16.25 degrees ! Estimated noise=0.87451 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.21611e-05 Jy ! Component: 100 - total flux cleaned = -3.68115e-05 Jy ! Component: 150 - total flux cleaned = -0.000199966 Jy ! Component: 200 - total flux cleaned = -0.000313553 Jy ! Total flux subtracted in 200 components = -0.000313553 Jy ! Clean residual min=-0.002874 max=0.002905 Jy/beam ! Clean residual mean=-0.000001 rms=0.000726 Jy/beam ! Combined flux in latest and established models = 0.453405 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 146 components and 0.453405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099461Jy sigma=0.885056 ! Fit after self-cal, rms=0.099420Jy sigma=0.884910 wmodel J0012-3954_X_map.mod ! Writing 146 model components to file: J0012-3954_X_map.mod wobs J0012-3954_X_uvs.fits ! Writing UV FITS file: J0012-3954_X_uvs.fits wwins J0012-3954_X_map.win ! wwins: Wrote 3 windows to J0012-3954_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000102816 Jy ! Component: 100 - total flux cleaned = 0.000572619 Jy ! Component: 150 - total flux cleaned = 0.00119884 Jy ! Component: 200 - total flux cleaned = 0.00166746 Jy ! Component: 250 - total flux cleaned = 0.00223627 Jy ! Component: 300 - total flux cleaned = 0.00270694 Jy ! Component: 350 - total flux cleaned = 0.00308691 Jy ! Component: 400 - total flux cleaned = 0.00319817 Jy ! Component: 450 - total flux cleaned = 0.00341575 Jy ! Component: 500 - total flux cleaned = 0.0036645 Jy ! Component: 550 - total flux cleaned = 0.00397813 Jy ! Component: 600 - total flux cleaned = 0.00421738 Jy ! Component: 650 - total flux cleaned = 0.0043523 Jy ! Component: 700 - total flux cleaned = 0.00451781 Jy ! Component: 750 - total flux cleaned = 0.00448529 Jy ! Component: 800 - total flux cleaned = 0.00454935 Jy ! Component: 850 - total flux cleaned = 0.00461253 Jy ! Component: 900 - total flux cleaned = 0.00464403 Jy ! Component: 950 - total flux cleaned = 0.00473563 Jy ! Component: 1000 - total flux cleaned = 0.00473506 Jy ! Component: 1050 - total flux cleaned = 0.00470487 Jy ! Component: 1100 - total flux cleaned = 0.004705 Jy ! Component: 1150 - total flux cleaned = 0.00467614 Jy ! Component: 1200 - total flux cleaned = 0.0047338 Jy ! Component: 1250 - total flux cleaned = 0.00476207 Jy ! Component: 1300 - total flux cleaned = 0.00490245 Jy ! Component: 1350 - total flux cleaned = 0.00509593 Jy ! Component: 1400 - total flux cleaned = 0.00506819 Jy ! Component: 1450 - total flux cleaned = 0.00520386 Jy ! Component: 1500 - total flux cleaned = 0.00531056 Jy ! Component: 1550 - total flux cleaned = 0.0053634 Jy ! Component: 1600 - total flux cleaned = 0.00544201 Jy ! Component: 1650 - total flux cleaned = 0.00546773 Jy ! Component: 1700 - total flux cleaned = 0.00554507 Jy ! Component: 1750 - total flux cleaned = 0.00562175 Jy ! Component: 1800 - total flux cleaned = 0.00579877 Jy ! Component: 1850 - total flux cleaned = 0.00589887 Jy ! Component: 1900 - total flux cleaned = 0.00599815 Jy ! Component: 1950 - total flux cleaned = 0.00607199 Jy ! Component: 2000 - total flux cleaned = 0.0062916 Jy ! Component: 2050 - total flux cleaned = 0.00636411 Jy ! Component: 2100 - total flux cleaned = 0.00655596 Jy ! Component: 2150 - total flux cleaned = 0.00660369 Jy ! Component: 2200 - total flux cleaned = 0.0067218 Jy ! Component: 2250 - total flux cleaned = 0.00683873 Jy ! Component: 2300 - total flux cleaned = 0.00690861 Jy ! Component: 2350 - total flux cleaned = 0.00706981 Jy ! Component: 2400 - total flux cleaned = 0.00716128 Jy ! Component: 2450 - total flux cleaned = 0.00732 Jy ! Component: 2500 - total flux cleaned = 0.00747781 Jy ! Component: 2550 - total flux cleaned = 0.00763434 Jy ! Component: 2600 - total flux cleaned = 0.00776746 Jy ! Component: 2650 - total flux cleaned = 0.00794384 Jy ! Component: 2700 - total flux cleaned = 0.00803141 Jy ! Component: 2750 - total flux cleaned = 0.00816223 Jy ! Component: 2800 - total flux cleaned = 0.00833538 Jy ! Component: 2850 - total flux cleaned = 0.00842161 Jy ! Component: 2900 - total flux cleaned = 0.00859264 Jy ! Component: 2950 - total flux cleaned = 0.00874128 Jy ! Component: 3000 - total flux cleaned = 0.00888918 Jy ! Component: 3050 - total flux cleaned = 0.00895228 Jy ! Component: 3100 - total flux cleaned = 0.00914008 Jy ! Component: 3150 - total flux cleaned = 0.0093059 Jy ! Component: 3200 - total flux cleaned = 0.00945006 Jy ! Component: 3250 - total flux cleaned = 0.00957277 Jy ! Component: 3300 - total flux cleaned = 0.00969492 Jy ! Component: 3350 - total flux cleaned = 0.00973559 Jy ! Component: 3400 - total flux cleaned = 0.00991671 Jy ! Component: 3450 - total flux cleaned = 0.00997671 Jy ! Component: 3500 - total flux cleaned = 0.0100364 Jy ! Component: 3550 - total flux cleaned = 0.0100958 Jy ! Component: 3600 - total flux cleaned = 0.0101944 Jy ! Component: 3650 - total flux cleaned = 0.0103512 Jy ! Component: 3700 - total flux cleaned = 0.0104291 Jy ! Component: 3750 - total flux cleaned = 0.0105261 Jy ! Component: 3800 - total flux cleaned = 0.0106419 Jy ! Component: 3850 - total flux cleaned = 0.0106417 Jy ! Component: 3900 - total flux cleaned = 0.0107562 Jy ! Component: 3950 - total flux cleaned = 0.0107564 Jy ! Component: 4000 - total flux cleaned = 0.0108696 Jy ! Component: 4050 - total flux cleaned = 0.0108695 Jy ! Total flux subtracted in 4096 components = 0.0108694 Jy ! Clean residual min=-0.000975 max=0.001229 Jy/beam ! Clean residual mean=-0.000002 rms=0.000328 Jy/beam ! Combined flux in latest and established models = 0.464274 Jy keep ! Adding 229 model components to the UV plane model. ! The established model now contains 375 components and 0.464274 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv118_uvs/J0012-3954_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.064 x 4.989 at 16.25 degrees (North through East) ! Clean map min=-0.0022739 max=0.37782 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv118_uvs/J0012-3954_X_map.fits wmodel /scr/pima/rv118_uvs/J0012-3954_X_map.mod ! Writing 375 model components to file: /scr/pima/rv118_uvs/J0012-3954_X_map.mod wobs /scr/pima/rv118_uvs/J0012-3954_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv118_uvs/J0012-3954_X_uvs.fits wwins /scr/pima/rv118_uvs/J0012-3954_X_map.win ! wwins: Wrote 4 windows to /scr/pima/rv118_uvs/J0012-3954_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.377824 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000324187 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.257411 0.257411 0.514822 1.02964 2.05929 4.11857 8.23715 16.4743 32.9486 65.8972 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.377 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1165.45 quit ! Quitting program ! Log file /scr/pima/rv118_uvs/J0012-3954_X_dfm.log closed on Sun Dec 10 00:06:09 2017