! Started logfile: /scr/pima/rv118_uvs/J0012-3954_S_dfm.log on Sun Dec 10 00:06:34 2017 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23275 obs /scr/pima/rv118_uvs/J0012-3954_S_uva.fits ! Reading UV FITS file: /scr/pima/rv118_uvs/J0012-3954_S_uva.fits ! AN table 1: 44 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.992424 visibilities/baseline/integration-bin. ! Found source: J0012-3954 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23275e+09 8e+06 1 8e+06 ! 02 2 2.26275e+09 8e+06 1 8e+06 ! 03 3 2.35275e+09 8e+06 1 8e+06 ! 04 4 2.37275e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 3668 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0012-3954_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.122677Jy sigma=13.054866 ! Fit after self-cal, rms=0.585085Jy sigma=6.755504 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.882 mas, bmaj=14.63 mas, bpa=17.77 degrees ! Estimated noise=2.01948 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.362881 Jy ! Component: 100 - total flux cleaned = 0.443257 Jy ! Total flux subtracted in 100 components = 0.443257 Jy ! Clean residual min=-0.056252 max=0.063368 Jy/beam ! Clean residual mean=-0.000205 rms=0.017750 Jy/beam ! Combined flux in latest and established models = 0.443257 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.443257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.213200Jy sigma=2.178373 ! Fit after self-cal, rms=0.213225Jy sigma=2.178290 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.881 mas, bmaj=17.85 mas, bpa=16.29 degrees ! Estimated noise=1.02122 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.018262 Jy ! Component: 100 - total flux cleaned = 0.0218441 Jy ! Component: 150 - total flux cleaned = 0.0241839 Jy ! Component: 200 - total flux cleaned = 0.0256628 Jy ! Total flux subtracted in 200 components = 0.0256628 Jy ! Clean residual min=-0.028131 max=0.032677 Jy/beam ! Clean residual mean=-0.000137 rms=0.007999 Jy/beam ! Combined flux in latest and established models = 0.46892 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 16 components and 0.46892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.209053Jy sigma=2.120378 ! Fit after self-cal, rms=0.209063Jy sigma=2.120233 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.881 x 17.85 at 16.29 degrees (North through East) ! Clean map min=-0.02805 max=0.42155 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 KP 1.01 LA 0.99 NL 1.31 ! OV 0.99 PT 1.04 SC 1.20 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.05 KP 1.00 LA 0.97 NL 1.31 ! OV 1.01 PT 1.05 SC 1.21 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.11 KP 0.58 LA 1.00 NL 0.81 ! OV 0.99 PT 1.08 SC 0.61 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.05 KP 1.03 LA 1.01 NL 1.40 ! OV 0.87 PT 1.07 SC 1.26 ! ! ! Fit before self-cal, rms=0.209063Jy sigma=2.120233 ! Fit after self-cal, rms=0.110018Jy sigma=1.087156 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.785 mas, bmaj=17.93 mas, bpa=16.36 degrees ! Estimated noise=1.01351 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00427523 Jy ! Component: 100 - total flux cleaned = -0.00472542 Jy ! Component: 150 - total flux cleaned = -0.00492494 Jy ! Component: 200 - total flux cleaned = -0.00492988 Jy ! Total flux subtracted in 200 components = -0.00492988 Jy ! Clean residual min=-0.007528 max=0.007749 Jy/beam ! Clean residual mean=-0.000002 rms=0.001848 Jy/beam ! Combined flux in latest and established models = 0.46399 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 43 components and 0.46399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108953Jy sigma=1.076470 ! Fit after self-cal, rms=0.109477Jy sigma=1.073387 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109477Jy sigma=1.073387 ! Fit after self-cal, rms=0.109122Jy sigma=1.059775 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.787 mas, bmaj=17.94 mas, bpa=16.24 degrees ! Estimated noise=1.00819 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00187144 Jy ! Component: 100 - total flux cleaned = -0.0024304 Jy ! Component: 150 - total flux cleaned = -0.00275766 Jy ! Component: 200 - total flux cleaned = -0.00275672 Jy ! Total flux subtracted in 200 components = -0.00275672 Jy ! Clean residual min=-0.006509 max=0.004882 Jy/beam ! Clean residual mean=-0.000028 rms=0.001392 Jy/beam ! Combined flux in latest and established models = 0.461233 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 48 components and 0.461233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108411Jy sigma=1.054114 ! Fit after self-cal, rms=0.108412Jy sigma=1.054017 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.05119e-05 Jy ! Component: 100 - total flux cleaned = 1.37103e-05 Jy ! Component: 150 - total flux cleaned = 1.03072e-05 Jy ! Component: 200 - total flux cleaned = 0.000122631 Jy ! Total flux subtracted in 200 components = 0.000122631 Jy ! Clean residual min=-0.005855 max=0.004375 Jy/beam ! Clean residual mean=-0.000028 rms=0.001323 Jy/beam ! Combined flux in latest and established models = 0.461356 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 59 components and 0.461356 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108075Jy sigma=1.051298 ! Fit after self-cal, rms=0.108068Jy sigma=1.051265 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108068Jy sigma=1.051265 ! Fit after self-cal, rms=0.108681Jy sigma=1.049014 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.788 mas, bmaj=17.94 mas, bpa=16.14 degrees ! Estimated noise=1.00491 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000936711 Jy ! Component: 100 - total flux cleaned = -0.00119416 Jy ! Component: 150 - total flux cleaned = -0.00142976 Jy ! Component: 200 - total flux cleaned = -0.0016344 Jy ! Total flux subtracted in 200 components = -0.0016344 Jy ! Clean residual min=-0.005016 max=0.003885 Jy/beam ! Clean residual mean=-0.000022 rms=0.001137 Jy/beam ! Combined flux in latest and established models = 0.459722 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 61 components and 0.459722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108320Jy sigma=1.046356 ! Fit after self-cal, rms=0.108327Jy sigma=1.046330 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.84488e-06 Jy ! Component: 100 - total flux cleaned = -8.7411e-05 Jy ! Component: 150 - total flux cleaned = -8.64919e-05 Jy ! Component: 200 - total flux cleaned = -1.01736e-05 Jy ! Total flux subtracted in 200 components = -1.01736e-05 Jy ! Clean residual min=-0.004562 max=0.003838 Jy/beam ! Clean residual mean=-0.000023 rms=0.001101 Jy/beam ! Combined flux in latest and established models = 0.459711 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 62 components and 0.459711 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108163Jy sigma=1.045157 ! Fit after self-cal, rms=0.108157Jy sigma=1.045139 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108157Jy sigma=1.045139 ! Fit after self-cal, rms=0.108328Jy sigma=1.044342 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.815 mas, bmaj=34.48 mas, bpa=2.032 degrees ! Estimated noise=1.14719 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000193262 Jy ! Component: 100 - total flux cleaned = -0.000117141 Jy ! Component: 150 - total flux cleaned = -4.95374e-05 Jy ! Component: 200 - total flux cleaned = -1.85008e-05 Jy ! Total flux subtracted in 200 components = -1.85008e-05 Jy ! Clean residual min=-0.003940 max=0.003517 Jy/beam ! Clean residual mean=-0.000011 rms=0.001061 Jy/beam ! Combined flux in latest and established models = 0.459693 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 74 components and 0.459693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108265Jy sigma=1.043965 ! Fit after self-cal, rms=0.108273Jy sigma=1.043943 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.98432e-05 Jy ! Component: 100 - total flux cleaned = 5.41495e-05 Jy ! Component: 150 - total flux cleaned = 5.28249e-05 Jy ! Component: 200 - total flux cleaned = 5.23651e-05 Jy ! Total flux subtracted in 200 components = 5.23651e-05 Jy ! Clean residual min=-0.003937 max=0.003441 Jy/beam ! Clean residual mean=-0.000011 rms=0.001063 Jy/beam ! Combined flux in latest and established models = 0.459745 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 79 components and 0.459745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108234Jy sigma=1.043664 ! Fit after self-cal, rms=0.108231Jy sigma=1.043653 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.788 mas, bmaj=17.95 mas, bpa=16.08 degrees ! Estimated noise=1.00248 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.788 x 17.95 at 16.08 degrees (North through East) ! Clean map min=-0.0041987 max=0.42869 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.771 mas, bmaj=14.62 mas, bpa=17.68 degrees ! Estimated noise=1.9674 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.353538 Jy ! Component: 100 - total flux cleaned = 0.430633 Jy ! Component: 150 - total flux cleaned = 0.431206 Jy ! Component: 200 - total flux cleaned = 0.435654 Jy ! Total flux subtracted in 200 components = 0.435654 Jy ! Clean residual min=-0.011235 max=0.013644 Jy/beam ! Clean residual mean=-0.000124 rms=0.002630 Jy/beam ! Combined flux in latest and established models = 0.435654 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.435654 Jy ! Inverting map and beam ! Estimated beam: bmin=3.788 mas, bmaj=17.95 mas, bpa=16.08 degrees ! Estimated noise=1.00248 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6.5, -1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116866 Jy ! Component: 100 - total flux cleaned = 0.0181354 Jy ! Component: 150 - total flux cleaned = 0.0199752 Jy ! Component: 200 - total flux cleaned = 0.021056 Jy ! Total flux subtracted in 200 components = 0.021056 Jy ! Clean residual min=-0.004401 max=0.005684 Jy/beam ! Clean residual mean=-0.000028 rms=0.001143 Jy/beam ! Combined flux in latest and established models = 0.45671 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 48 components and 0.45671 Jy ! Inverting map ! Added new window around map position (-7.5, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00257117 Jy ! Component: 100 - total flux cleaned = 0.00256562 Jy ! Component: 150 - total flux cleaned = 0.00256777 Jy ! Component: 200 - total flux cleaned = 0.00256802 Jy ! Total flux subtracted in 200 components = 0.00256802 Jy ! Clean residual min=-0.003981 max=0.003382 Jy/beam ! Clean residual mean=-0.000011 rms=0.000951 Jy/beam ! Combined flux in latest and established models = 0.459278 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 81 components and 0.459278 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.815 mas, bmaj=34.48 mas, bpa=2.032 degrees ! Estimated noise=1.14719 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000532692 Jy ! Component: 100 - total flux cleaned = 0.000596426 Jy ! Component: 150 - total flux cleaned = 0.000595787 Jy ! Component: 200 - total flux cleaned = 0.000595561 Jy ! Total flux subtracted in 200 components = 0.000595561 Jy ! Clean residual min=-0.003274 max=0.002933 Jy/beam ! Clean residual mean=-0.000009 rms=0.000917 Jy/beam ! Combined flux in latest and established models = 0.459873 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.19838e-05 Jy ! Component: 100 - total flux cleaned = -7.86415e-05 Jy ! Component: 150 - total flux cleaned = -0.000150197 Jy ! Component: 200 - total flux cleaned = -0.000216721 Jy ! Total flux subtracted in 200 components = -0.000216721 Jy ! Clean residual min=-0.003195 max=0.002940 Jy/beam ! Clean residual mean=-0.000010 rms=0.000907 Jy/beam ! Combined flux in latest and established models = 0.459657 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 100 components and 0.459657 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.788 mas, bmaj=17.95 mas, bpa=16.08 degrees ! Estimated noise=1.00248 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000145365 Jy ! Component: 100 - total flux cleaned = 0.000210579 Jy ! Component: 150 - total flux cleaned = 0.000332148 Jy ! Component: 200 - total flux cleaned = 0.000331286 Jy ! Total flux subtracted in 200 components = 0.000331286 Jy ! Clean residual min=-0.003611 max=0.003100 Jy/beam ! Clean residual mean=-0.000005 rms=0.000871 Jy/beam ! Combined flux in latest and established models = 0.459988 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 124 components and 0.459988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107830Jy sigma=1.041282 ! Fit after self-cal, rms=0.107786Jy sigma=1.041102 wmodel J0012-3954_S_map.mod ! Writing 124 model components to file: J0012-3954_S_map.mod wobs J0012-3954_S_uvs.fits ! Writing UV FITS file: J0012-3954_S_uvs.fits wwins J0012-3954_S_map.win ! wwins: Wrote 3 windows to J0012-3954_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000540533 Jy ! Component: 100 - total flux cleaned = -0.00053766 Jy ! Component: 150 - total flux cleaned = -0.000839174 Jy ! Component: 200 - total flux cleaned = -0.000935237 Jy ! Component: 250 - total flux cleaned = -0.00116423 Jy ! Component: 300 - total flux cleaned = -0.001341 Jy ! Component: 350 - total flux cleaned = -0.00146797 Jy ! Component: 400 - total flux cleaned = -0.00146782 Jy ! Component: 450 - total flux cleaned = -0.00150766 Jy ! Component: 500 - total flux cleaned = -0.0015465 Jy ! Component: 550 - total flux cleaned = -0.00154609 Jy ! Component: 600 - total flux cleaned = -0.00154502 Jy ! Component: 650 - total flux cleaned = -0.00168727 Jy ! Component: 700 - total flux cleaned = -0.00165118 Jy ! Component: 750 - total flux cleaned = -0.00172003 Jy ! Component: 800 - total flux cleaned = -0.00178681 Jy ! Component: 850 - total flux cleaned = -0.00182021 Jy ! Component: 900 - total flux cleaned = -0.00194829 Jy ! Component: 950 - total flux cleaned = -0.00207442 Jy ! Component: 1000 - total flux cleaned = -0.0022923 Jy ! Component: 1050 - total flux cleaned = -0.00253679 Jy ! Component: 1100 - total flux cleaned = -0.00274705 Jy ! Component: 1150 - total flux cleaned = -0.00289524 Jy ! Component: 1200 - total flux cleaned = -0.00310026 Jy ! Component: 1250 - total flux cleaned = -0.00333127 Jy ! Component: 1300 - total flux cleaned = -0.00350273 Jy ! Component: 1350 - total flux cleaned = -0.0037276 Jy ! Component: 1400 - total flux cleaned = -0.00394955 Jy ! Component: 1450 - total flux cleaned = -0.00416847 Jy ! Component: 1500 - total flux cleaned = -0.00424987 Jy ! Component: 1550 - total flux cleaned = -0.00441097 Jy ! Component: 1600 - total flux cleaned = -0.00449011 Jy ! Component: 1650 - total flux cleaned = -0.00462142 Jy ! Component: 1700 - total flux cleaned = -0.00475096 Jy ! Component: 1750 - total flux cleaned = -0.00485327 Jy ! Component: 1800 - total flux cleaned = -0.00500544 Jy ! Component: 1850 - total flux cleaned = -0.00510616 Jy ! Component: 1900 - total flux cleaned = -0.0052554 Jy ! Component: 1950 - total flux cleaned = -0.00537857 Jy ! Component: 2000 - total flux cleaned = -0.00550051 Jy ! Component: 2050 - total flux cleaned = -0.00559716 Jy ! Component: 2100 - total flux cleaned = -0.00564496 Jy ! Component: 2150 - total flux cleaned = -0.00576426 Jy ! Component: 2200 - total flux cleaned = -0.0058587 Jy ! Component: 2250 - total flux cleaned = -0.00585878 Jy ! Component: 2300 - total flux cleaned = -0.00595215 Jy ! Component: 2350 - total flux cleaned = -0.00599827 Jy ! Component: 2400 - total flux cleaned = -0.00604443 Jy ! Component: 2450 - total flux cleaned = -0.00604458 Jy ! Component: 2500 - total flux cleaned = -0.0061125 Jy ! Component: 2550 - total flux cleaned = -0.00620255 Jy ! Component: 2600 - total flux cleaned = -0.00618032 Jy ! Component: 2650 - total flux cleaned = -0.00622458 Jy ! Component: 2700 - total flux cleaned = -0.00618054 Jy ! Component: 2750 - total flux cleaned = -0.00622464 Jy ! Component: 2800 - total flux cleaned = -0.00624673 Jy ! Component: 2850 - total flux cleaned = -0.00626815 Jy ! Component: 2900 - total flux cleaned = -0.00624682 Jy ! Component: 2950 - total flux cleaned = -0.0062682 Jy ! Component: 3000 - total flux cleaned = -0.0062258 Jy ! Component: 3050 - total flux cleaned = -0.00620464 Jy ! Component: 3100 - total flux cleaned = -0.00618364 Jy ! Component: 3150 - total flux cleaned = -0.00612089 Jy ! Component: 3200 - total flux cleaned = -0.0061 Jy ! Component: 3250 - total flux cleaned = -0.00607943 Jy ! Component: 3300 - total flux cleaned = -0.00609988 Jy ! Component: 3350 - total flux cleaned = -0.00603847 Jy ! Component: 3400 - total flux cleaned = -0.00607923 Jy ! Component: 3450 - total flux cleaned = -0.00614006 Jy ! Component: 3500 - total flux cleaned = -0.00605931 Jy ! Component: 3550 - total flux cleaned = -0.0060392 Jy ! Component: 3600 - total flux cleaned = -0.00605911 Jy ! Component: 3650 - total flux cleaned = -0.00601919 Jy ! Component: 3700 - total flux cleaned = -0.00593963 Jy ! Component: 3750 - total flux cleaned = -0.00584079 Jy ! Component: 3800 - total flux cleaned = -0.00582105 Jy ! Component: 3850 - total flux cleaned = -0.00568372 Jy ! Component: 3900 - total flux cleaned = -0.00570319 Jy ! Component: 3950 - total flux cleaned = -0.00560582 Jy ! Component: 4000 - total flux cleaned = -0.00558636 Jy ! Component: 4050 - total flux cleaned = -0.00547029 Jy ! Total flux subtracted in 4096 components = -0.00545111 Jy ! Clean residual min=-0.001065 max=0.001159 Jy/beam ! Clean residual mean=0.000003 rms=0.000358 Jy/beam ! Combined flux in latest and established models = 0.454537 Jy keep ! Adding 232 model components to the UV plane model. ! The established model now contains 356 components and 0.454536 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv118_uvs/J0012-3954_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.788 x 17.95 at 16.08 degrees (North through East) ! Clean map min=-0.0034647 max=0.44044 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv118_uvs/J0012-3954_S_map.fits wmodel /scr/pima/rv118_uvs/J0012-3954_S_map.mod ! Writing 356 model components to file: /scr/pima/rv118_uvs/J0012-3954_S_map.mod wobs /scr/pima/rv118_uvs/J0012-3954_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv118_uvs/J0012-3954_S_uvs.fits wwins /scr/pima/rv118_uvs/J0012-3954_S_map.win ! wwins: Wrote 4 windows to /scr/pima/rv118_uvs/J0012-3954_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.440445 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000353578 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.240832 0.240832 0.481665 0.96333 1.92666 3.85332 7.70664 15.4133 30.8266 61.6531 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.44 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1245.68 quit ! Quitting program ! Log file /scr/pima/rv118_uvs/J0012-3954_S_dfm.log closed on Sun Dec 10 00:06:38 2017