! Started logfile: /scr/pima/rv117_uvs/J2318-1659_X_dfm.log on Sat Dec 9 23:46:57 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv117_uvs/J2318-1659_X_uva.fits ! Reading UV FITS file: /scr/pima/rv117_uvs/J2318-1659_X_uva.fits ! AN table 1: 44 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.973232 visibilities/baseline/integration-bin. ! Found source: J2318-1659 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 74 lines of history. ! ! Reading 7708 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2318-1659_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.002495Jy sigma=18.231623 ! Fit after self-cal, rms=0.936015Jy sigma=17.009887 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6868 mas, bmaj=1.663 mas, bpa=-3.95 degrees ! Estimated noise=0.864708 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0499172 Jy ! Component: 100 - total flux cleaned = 0.0614591 Jy ! Total flux subtracted in 100 components = 0.0614591 Jy ! Clean residual min=-0.004044 max=0.004307 Jy/beam ! Clean residual mean=0.000002 rms=0.000840 Jy/beam ! Combined flux in latest and established models = 0.0614591 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0614591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058792Jy sigma=0.954984 ! Fit after self-cal, rms=0.058515Jy sigma=0.950855 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8788 mas, bmaj=2.064 mas, bpa=-3.735 degrees ! Estimated noise=0.457962 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00534992 Jy ! Component: 100 - total flux cleaned = 0.00747851 Jy ! Component: 150 - total flux cleaned = 0.00852778 Jy ! Component: 200 - total flux cleaned = 0.00907119 Jy ! Total flux subtracted in 200 components = 0.00907119 Jy ! Clean residual min=-0.001851 max=0.001812 Jy/beam ! Clean residual mean=0.000001 rms=0.000432 Jy/beam ! Combined flux in latest and established models = 0.0705303 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 27 components and 0.0705303 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058125Jy sigma=0.941400 ! Fit after self-cal, rms=0.058136Jy sigma=0.941329 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8788 x 2.064 at -3.735 degrees (North through East) ! Clean map min=-0.0017356 max=0.065637 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.97 HN 1.10 KP 0.95 ! LA 1.00 MK 0.98 NL 0.99 OV 1.02 ! PT 0.97 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 1.02 KP 1.03 ! LA 0.98 MK 1.03 NL 1.00 OV 1.02 ! PT 0.97 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.05 HN 1.03 KP 1.02 ! LA 1.00 MK 0.99 NL 1.00 OV 0.99 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 HN 0.94 KP 1.02 ! LA 0.98 MK 1.01 NL 1.01 OV 0.97 ! PT 1.01 SC 0.92 ! ! ! Fit before self-cal, rms=0.058136Jy sigma=0.941329 ! Fit after self-cal, rms=0.057918Jy sigma=0.940097 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8801 mas, bmaj=2.063 mas, bpa=-3.574 degrees ! Estimated noise=0.457133 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.79542e-05 Jy ! Component: 100 - total flux cleaned = -6.475e-05 Jy ! Component: 150 - total flux cleaned = -8.97199e-05 Jy ! Component: 200 - total flux cleaned = -0.000112304 Jy ! Total flux subtracted in 200 components = -0.000112304 Jy ! Clean residual min=-0.001878 max=0.001693 Jy/beam ! Clean residual mean=0.000001 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.070418 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 34 components and 0.070418 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057913Jy sigma=0.939987 ! Fit after self-cal, rms=0.057919Jy sigma=0.939939 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057919Jy sigma=0.939939 ! Fit after self-cal, rms=0.058721Jy sigma=0.938569 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8801 mas, bmaj=2.065 mas, bpa=-3.629 degrees ! Estimated noise=0.459042 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000268042 Jy ! Component: 100 - total flux cleaned = 0.000279451 Jy ! Component: 150 - total flux cleaned = 0.00030087 Jy ! Component: 200 - total flux cleaned = 0.000310981 Jy ! Total flux subtracted in 200 components = 0.000310981 Jy ! Clean residual min=-0.001830 max=0.001550 Jy/beam ! Clean residual mean=0.000001 rms=0.000404 Jy/beam ! Combined flux in latest and established models = 0.0707289 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 35 components and 0.0707289 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058716Jy sigma=0.938496 ! Fit after self-cal, rms=0.058736Jy sigma=0.938434 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.98339e-06 Jy ! Component: 100 - total flux cleaned = 1.25257e-05 Jy ! Component: 150 - total flux cleaned = 2.16025e-05 Jy ! Component: 200 - total flux cleaned = 3.02886e-05 Jy ! Total flux subtracted in 200 components = 3.02886e-05 Jy ! Clean residual min=-0.001832 max=0.001549 Jy/beam ! Clean residual mean=0.000001 rms=0.000403 Jy/beam ! Combined flux in latest and established models = 0.0707592 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 36 components and 0.0707592 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058733Jy sigma=0.938387 ! Fit after self-cal, rms=0.058733Jy sigma=0.938384 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058733Jy sigma=0.938384 ! Fit after self-cal, rms=0.059015Jy sigma=0.938334 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8795 mas, bmaj=2.064 mas, bpa=-3.653 degrees ! Estimated noise=0.46107 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00036483 Jy ! Component: 100 - total flux cleaned = 0.00040127 Jy ! Component: 150 - total flux cleaned = 0.000409588 Jy ! Component: 200 - total flux cleaned = 0.000417313 Jy ! Total flux subtracted in 200 components = 0.000417313 Jy ! Clean residual min=-0.001844 max=0.001554 Jy/beam ! Clean residual mean=0.000001 rms=0.000404 Jy/beam ! Combined flux in latest and established models = 0.0711765 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 37 components and 0.0711765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059011Jy sigma=0.938282 ! Fit after self-cal, rms=0.059012Jy sigma=0.938278 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.22618e-07 Jy ! Component: 100 - total flux cleaned = 5.61704e-07 Jy ! Component: 150 - total flux cleaned = 7.71021e-06 Jy ! Component: 200 - total flux cleaned = 7.61283e-06 Jy ! Total flux subtracted in 200 components = 7.61283e-06 Jy ! Clean residual min=-0.001841 max=0.001560 Jy/beam ! Clean residual mean=0.000001 rms=0.000404 Jy/beam ! Combined flux in latest and established models = 0.0711842 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 39 components and 0.0711841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059011Jy sigma=0.938249 ! Fit after self-cal, rms=0.059010Jy sigma=0.938247 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059010Jy sigma=0.938247 ! Fit after self-cal, rms=0.059215Jy sigma=0.938198 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.219 mas, bmaj=4.236 mas, bpa=1.23 degrees ! Estimated noise=0.571025 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000413711 Jy ! Component: 100 - total flux cleaned = 0.000547372 Jy ! Component: 150 - total flux cleaned = 0.000553914 Jy ! Component: 200 - total flux cleaned = 0.000556932 Jy ! Total flux subtracted in 200 components = 0.000556932 Jy ! Clean residual min=-0.002018 max=0.001920 Jy/beam ! Clean residual mean=0.000001 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.0717411 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 45 components and 0.0717411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059213Jy sigma=0.938189 ! Fit after self-cal, rms=0.059214Jy sigma=0.938179 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.36758e-06 Jy ! Component: 100 - total flux cleaned = 1.4309e-05 Jy ! Component: 150 - total flux cleaned = 1.70917e-05 Jy ! Component: 200 - total flux cleaned = 2.22e-05 Jy ! Total flux subtracted in 200 components = 2.22e-05 Jy ! Clean residual min=-0.002014 max=0.001922 Jy/beam ! Clean residual mean=0.000001 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.0717633 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 46 components and 0.0717633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059214Jy sigma=0.938186 ! Fit after self-cal, rms=0.059215Jy sigma=0.938185 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8785 mas, bmaj=2.061 mas, bpa=-3.675 degrees ! Estimated noise=0.46293 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8785 x 2.061 at -3.675 degrees (North through East) ! Clean map min=-0.001736 max=0.066244 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6851 mas, bmaj=1.66 mas, bpa=-4.015 degrees ! Estimated noise=0.872689 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0505061 Jy ! Component: 100 - total flux cleaned = 0.0623366 Jy ! Component: 150 - total flux cleaned = 0.0669575 Jy ! Component: 200 - total flux cleaned = 0.0693132 Jy ! Total flux subtracted in 200 components = 0.0693132 Jy ! Clean residual min=-0.003471 max=0.003043 Jy/beam ! Clean residual mean=0.000000 rms=0.000764 Jy/beam ! Combined flux in latest and established models = 0.0693132 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0693132 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8785 mas, bmaj=2.061 mas, bpa=-3.675 degrees ! Estimated noise=0.46293 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00177047 Jy ! Component: 100 - total flux cleaned = 0.00222384 Jy ! Component: 150 - total flux cleaned = 0.00229567 Jy ! Component: 200 - total flux cleaned = 0.00231517 Jy ! Total flux subtracted in 200 components = 0.00231517 Jy ! Clean residual min=-0.001797 max=0.001565 Jy/beam ! Clean residual mean=0.000001 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.0716284 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 25 components and 0.0716284 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.219 mas, bmaj=4.236 mas, bpa=1.23 degrees ! Estimated noise=0.571025 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000301418 Jy ! Component: 100 - total flux cleaned = 0.000301622 Jy ! Component: 150 - total flux cleaned = 0.000301807 Jy ! Component: 200 - total flux cleaned = 0.000296128 Jy ! Total flux subtracted in 200 components = 0.000296128 Jy ! Clean residual min=-0.001994 max=0.001934 Jy/beam ! Clean residual mean=0.000001 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.0719245 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.67746e-07 Jy ! Component: 100 - total flux cleaned = -5.49972e-06 Jy ! Component: 150 - total flux cleaned = -5.69308e-06 Jy ! Component: 200 - total flux cleaned = -1.05835e-05 Jy ! Total flux subtracted in 200 components = -1.05835e-05 Jy ! Clean residual min=-0.001998 max=0.001932 Jy/beam ! Clean residual mean=0.000001 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.071914 Jy ! Adding 5 model components to the UV plane model. ! The established model now contains 29 components and 0.071914 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8785 mas, bmaj=2.061 mas, bpa=-3.675 degrees ! Estimated noise=0.46293 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000109928 Jy ! Component: 100 - total flux cleaned = -0.000177707 Jy ! Component: 150 - total flux cleaned = -0.000236067 Jy ! Component: 200 - total flux cleaned = -0.000262107 Jy ! Total flux subtracted in 200 components = -0.000262107 Jy ! Clean residual min=-0.001818 max=0.001551 Jy/beam ! Clean residual mean=0.000001 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.0716519 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 35 components and 0.0716519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059224Jy sigma=0.938321 ! Fit after self-cal, rms=0.059224Jy sigma=0.938308 wmodel J2318-1659_X_map.mod ! Writing 35 model components to file: J2318-1659_X_map.mod wobs J2318-1659_X_uvs.fits ! Writing UV FITS file: J2318-1659_X_uvs.fits wwins J2318-1659_X_map.win ! wwins: Wrote 1 windows to J2318-1659_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000587298 Jy ! Component: 100 - total flux cleaned = -0.000852444 Jy ! Component: 150 - total flux cleaned = -0.000824348 Jy ! Component: 200 - total flux cleaned = -0.000768863 Jy ! Component: 250 - total flux cleaned = -0.000661408 Jy ! Component: 300 - total flux cleaned = -0.000478936 Jy ! Component: 350 - total flux cleaned = -0.000402755 Jy ! Component: 400 - total flux cleaned = -0.000352488 Jy ! Component: 450 - total flux cleaned = -0.000230622 Jy ! Component: 500 - total flux cleaned = -0.000182826 Jy ! Component: 550 - total flux cleaned = -8.88079e-05 Jy ! Component: 600 - total flux cleaned = -4.21885e-05 Jy ! Component: 650 - total flux cleaned = 2.56893e-05 Jy ! Component: 700 - total flux cleaned = 9.26079e-05 Jy ! Component: 750 - total flux cleaned = 0.000158716 Jy ! Component: 800 - total flux cleaned = 0.000202089 Jy ! Component: 850 - total flux cleaned = 0.000180588 Jy ! Component: 900 - total flux cleaned = 0.000137927 Jy ! Component: 950 - total flux cleaned = 0.000200559 Jy ! Component: 1000 - total flux cleaned = 0.000139173 Jy ! Component: 1050 - total flux cleaned = 0.000200264 Jy ! Component: 1100 - total flux cleaned = 0.000220222 Jy ! Component: 1150 - total flux cleaned = 0.000260282 Jy ! Component: 1200 - total flux cleaned = 0.000181445 Jy ! Component: 1250 - total flux cleaned = 0.000259608 Jy ! Component: 1300 - total flux cleaned = 0.000240317 Jy ! Component: 1350 - total flux cleaned = 0.000240316 Jy ! Component: 1400 - total flux cleaned = 0.000297463 Jy ! Component: 1450 - total flux cleaned = 0.000335338 Jy ! Component: 1500 - total flux cleaned = 0.000279231 Jy ! Component: 1550 - total flux cleaned = 0.00031618 Jy ! Component: 1600 - total flux cleaned = 0.000334472 Jy ! Component: 1650 - total flux cleaned = 0.000279867 Jy ! Component: 1700 - total flux cleaned = 0.00026179 Jy ! Component: 1750 - total flux cleaned = 0.000333549 Jy ! Component: 1800 - total flux cleaned = 0.000315814 Jy ! Component: 1850 - total flux cleaned = 0.000351198 Jy ! Component: 1900 - total flux cleaned = 0.000316233 Jy ! Component: 1950 - total flux cleaned = 0.000281223 Jy ! Component: 2000 - total flux cleaned = 0.00031565 Jy ! Component: 2050 - total flux cleaned = 0.000281551 Jy ! Component: 2100 - total flux cleaned = 0.000298533 Jy ! Component: 2150 - total flux cleaned = 0.000365919 Jy ! Component: 2200 - total flux cleaned = 0.000265427 Jy ! Component: 2250 - total flux cleaned = 0.000199126 Jy ! Component: 2300 - total flux cleaned = 0.000182785 Jy ! Component: 2350 - total flux cleaned = 0.000100935 Jy ! Component: 2400 - total flux cleaned = 0.000198358 Jy ! Component: 2450 - total flux cleaned = 0.00011748 Jy ! Component: 2500 - total flux cleaned = 3.72366e-05 Jy ! Component: 2550 - total flux cleaned = 3.73705e-05 Jy ! Component: 2600 - total flux cleaned = 5.63904e-06 Jy ! Component: 2650 - total flux cleaned = 3.72026e-05 Jy ! Component: 2700 - total flux cleaned = -9.70718e-06 Jy ! Component: 2750 - total flux cleaned = -4.08364e-05 Jy ! Component: 2800 - total flux cleaned = -7.14799e-05 Jy ! Component: 2850 - total flux cleaned = -5.62703e-05 Jy ! Component: 2900 - total flux cleaned = -0.00011711 Jy ! Component: 2950 - total flux cleaned = -0.000207842 Jy ! Component: 3000 - total flux cleaned = -0.000222866 Jy ! Component: 3050 - total flux cleaned = -0.000282445 Jy ! Component: 3100 - total flux cleaned = -0.000267506 Jy ! Component: 3150 - total flux cleaned = -0.000311834 Jy ! Component: 3200 - total flux cleaned = -0.00038513 Jy ! Component: 3250 - total flux cleaned = -0.000355789 Jy ! Component: 3300 - total flux cleaned = -0.000370278 Jy ! Component: 3350 - total flux cleaned = -0.000355989 Jy ! Component: 3400 - total flux cleaned = -0.000456347 Jy ! Component: 3450 - total flux cleaned = -0.000399242 Jy ! Component: 3500 - total flux cleaned = -0.000370937 Jy ! Component: 3550 - total flux cleaned = -0.00045562 Jy ! Component: 3600 - total flux cleaned = -0.000455559 Jy ! Component: 3650 - total flux cleaned = -0.000511428 Jy ! Component: 3700 - total flux cleaned = -0.000511352 Jy ! Component: 3750 - total flux cleaned = -0.000539142 Jy ! Component: 3800 - total flux cleaned = -0.000525243 Jy ! Component: 3850 - total flux cleaned = -0.000566371 Jy ! Component: 3900 - total flux cleaned = -0.000661586 Jy ! Component: 3950 - total flux cleaned = -0.000647977 Jy ! Component: 4000 - total flux cleaned = -0.00074234 Jy ! Component: 4050 - total flux cleaned = -0.00071549 Jy ! Total flux subtracted in 4096 components = -0.000768824 Jy ! Clean residual min=-0.000796 max=0.000756 Jy/beam ! Clean residual mean=0.000000 rms=0.000226 Jy/beam ! Combined flux in latest and established models = 0.070883 Jy keep ! Adding 310 model components to the UV plane model. ! The established model now contains 345 components and 0.0708831 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv117_uvs/J2318-1659_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8785 x 2.061 at -3.675 degrees (North through East) ! Clean map min=-0.0012703 max=0.066099 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv117_uvs/J2318-1659_X_map.fits wmodel /scr/pima/rv117_uvs/J2318-1659_X_map.mod ! Writing 345 model components to file: /scr/pima/rv117_uvs/J2318-1659_X_map.mod wobs /scr/pima/rv117_uvs/J2318-1659_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv117_uvs/J2318-1659_X_uvs.fits wwins /scr/pima/rv117_uvs/J2318-1659_X_map.win ! wwins: Wrote 2 windows to /scr/pima/rv117_uvs/J2318-1659_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0660987 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000225632 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.02407 1.02407 2.04814 4.09627 8.19255 16.3851 32.7702 65.5404 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.066 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 292.949 quit ! Quitting program ! Log file /scr/pima/rv117_uvs/J2318-1659_X_dfm.log closed on Sat Dec 9 23:47:01 2017