! Started logfile: /scr/pima/rv117_uvs/J2236-1433_X_dfm.log on Sat Dec 9 23:46:43 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv117_uvs/J2236-1433_X_uva.fits ! Reading UV FITS file: /scr/pima/rv117_uvs/J2236-1433_X_uva.fits ! AN table 1: 28 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.989683 visibilities/baseline/integration-bin. ! Found source: J2236-1433 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 74 lines of history. ! ! Reading 4988 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2236-1433_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.138389Jy sigma=19.572174 ! Fit after self-cal, rms=0.517942Jy sigma=8.617759 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6811 mas, bmaj=1.696 mas, bpa=-3.523 degrees ! Estimated noise=0.944797 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.36892 Jy ! Component: 100 - total flux cleaned = 0.453853 Jy ! Total flux subtracted in 100 components = 0.453853 Jy ! Clean residual min=-0.018984 max=0.054095 Jy/beam ! Clean residual mean=0.000045 rms=0.004722 Jy/beam ! Combined flux in latest and established models = 0.453853 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.453853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124887Jy sigma=2.112064 ! Fit after self-cal, rms=0.124895Jy sigma=2.111180 ! Inverting map ! Added new window around map position (1.6, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0502839 Jy ! Component: 100 - total flux cleaned = 0.0799773 Jy ! Total flux subtracted in 100 components = 0.0799773 Jy ! Clean residual min=-0.012637 max=0.024365 Jy/beam ! Clean residual mean=0.000034 rms=0.003068 Jy/beam ! Combined flux in latest and established models = 0.53383 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 18 components and 0.53383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092862Jy sigma=1.512081 ! Fit after self-cal, rms=0.090327Jy sigma=1.472634 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0250763 Jy ! Component: 100 - total flux cleaned = 0.041746 Jy ! Total flux subtracted in 100 components = 0.041746 Jy ! Clean residual min=-0.009279 max=0.014837 Jy/beam ! Clean residual mean=0.000029 rms=0.002159 Jy/beam ! Combined flux in latest and established models = 0.575576 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 30 components and 0.575576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078433Jy sigma=1.245511 ! Fit after self-cal, rms=0.077468Jy sigma=1.230535 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0147184 Jy ! Component: 100 - total flux cleaned = 0.0243784 Jy ! Total flux subtracted in 100 components = 0.0243784 Jy ! Clean residual min=-0.007607 max=0.010605 Jy/beam ! Clean residual mean=0.000026 rms=0.001750 Jy/beam ! Combined flux in latest and established models = 0.599955 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 32 components and 0.599955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072754Jy sigma=1.139821 ! Fit after self-cal, rms=0.072384Jy sigma=1.133921 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8709 mas, bmaj=2.036 mas, bpa=-2.936 degrees ! Estimated noise=0.605504 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0137665 Jy ! Component: 100 - total flux cleaned = 0.0215672 Jy ! Component: 150 - total flux cleaned = 0.0266849 Jy ! Component: 200 - total flux cleaned = 0.0302662 Jy ! Total flux subtracted in 200 components = 0.0302662 Jy ! Clean residual min=-0.005835 max=0.010217 Jy/beam ! Clean residual mean=0.000038 rms=0.001750 Jy/beam ! Combined flux in latest and established models = 0.630221 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 40 components and 0.630221 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069678Jy sigma=1.082039 ! Fit after self-cal, rms=0.069453Jy sigma=1.077746 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8709 x 2.036 at -2.936 degrees (North through East) ! Clean map min=-0.0052357 max=0.48118 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 HN 1.09 KP 0.99 ! LA 0.99 MK 1.00 NL 1.00 OV 0.99 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 1.09 KP 0.99 ! LA 0.99 MK 0.99 NL 1.00 OV 1.00 ! PT 0.99 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.07 KP 0.99 ! LA 1.00 MK 0.99 NL 0.99 OV 0.99 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 1.05 KP 0.99 ! LA 1.01 MK 0.98 NL 0.97 OV 0.98 ! PT 0.98 SC 0.98 ! ! ! Fit before self-cal, rms=0.069453Jy sigma=1.077746 ! Fit after self-cal, rms=0.067625Jy sigma=1.050351 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.872 mas, bmaj=2.033 mas, bpa=-2.855 degrees ! Estimated noise=0.604655 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.6, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00954942 Jy ! Component: 100 - total flux cleaned = 0.014706 Jy ! Component: 150 - total flux cleaned = 0.0183665 Jy ! Component: 200 - total flux cleaned = 0.0211184 Jy ! Total flux subtracted in 200 components = 0.0211184 Jy ! Clean residual min=-0.004341 max=0.005866 Jy/beam ! Clean residual mean=0.000024 rms=0.001171 Jy/beam ! Combined flux in latest and established models = 0.651339 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 61 components and 0.651339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066226Jy sigma=1.023121 ! Fit after self-cal, rms=0.066165Jy sigma=1.021724 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066165Jy sigma=1.021724 ! Fit after self-cal, rms=0.064427Jy sigma=0.981524 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8723 mas, bmaj=2.036 mas, bpa=-2.867 degrees ! Estimated noise=0.604079 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00304236 Jy ! Component: 100 - total flux cleaned = 0.00512223 Jy ! Component: 150 - total flux cleaned = 0.00623157 Jy ! Component: 200 - total flux cleaned = 0.00672639 Jy ! Total flux subtracted in 200 components = 0.00672639 Jy ! Clean residual min=-0.002423 max=0.003356 Jy/beam ! Clean residual mean=0.000001 rms=0.000641 Jy/beam ! Combined flux in latest and established models = 0.658066 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 85 components and 0.658066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064243Jy sigma=0.977881 ! Fit after self-cal, rms=0.064239Jy sigma=0.977582 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.2, -1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00321761 Jy ! Component: 100 - total flux cleaned = 0.00397345 Jy ! Component: 150 - total flux cleaned = 0.00418426 Jy ! Component: 200 - total flux cleaned = 0.00437558 Jy ! Total flux subtracted in 200 components = 0.00437558 Jy ! Clean residual min=-0.002253 max=0.002460 Jy/beam ! Clean residual mean=-0.000001 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.662441 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 105 components and 0.662441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064063Jy sigma=0.974197 ! Fit after self-cal, rms=0.064052Jy sigma=0.974025 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064052Jy sigma=0.974025 ! Fit after self-cal, rms=0.064109Jy sigma=0.973114 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8719 mas, bmaj=2.037 mas, bpa=-2.852 degrees ! Estimated noise=0.604449 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169469 Jy ! Component: 100 - total flux cleaned = 0.00263322 Jy ! Component: 150 - total flux cleaned = 0.00321714 Jy ! Component: 200 - total flux cleaned = 0.00362983 Jy ! Total flux subtracted in 200 components = 0.00362983 Jy ! Clean residual min=-0.002238 max=0.002339 Jy/beam ! Clean residual mean=-0.000002 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.666071 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 116 components and 0.666071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064038Jy sigma=0.971914 ! Fit after self-cal, rms=0.064031Jy sigma=0.971851 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000382566 Jy ! Component: 100 - total flux cleaned = 0.000588785 Jy ! Component: 150 - total flux cleaned = 0.000813394 Jy ! Component: 200 - total flux cleaned = 0.000993246 Jy ! Total flux subtracted in 200 components = 0.000993246 Jy ! Clean residual min=-0.002294 max=0.002301 Jy/beam ! Clean residual mean=-0.000002 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.667064 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 121 components and 0.667064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063998Jy sigma=0.971312 ! Fit after self-cal, rms=0.063992Jy sigma=0.971283 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063992Jy sigma=0.971283 ! Fit after self-cal, rms=0.063973Jy sigma=0.970571 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.195 mas, bmaj=4.114 mas, bpa=3.914 degrees ! Estimated noise=0.765106 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147786 Jy ! Component: 100 - total flux cleaned = 0.00247244 Jy ! Component: 150 - total flux cleaned = 0.00276046 Jy ! Component: 200 - total flux cleaned = 0.00293154 Jy ! Total flux subtracted in 200 components = 0.00293154 Jy ! Clean residual min=-0.002602 max=0.002531 Jy/beam ! Clean residual mean=-0.000006 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.669996 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 129 components and 0.669996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063952Jy sigma=0.970197 ! Fit after self-cal, rms=0.063945Jy sigma=0.970157 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000198446 Jy ! Component: 100 - total flux cleaned = 0.000382567 Jy ! Component: 150 - total flux cleaned = 0.000503606 Jy ! Component: 200 - total flux cleaned = 0.000657416 Jy ! Total flux subtracted in 200 components = 0.000657416 Jy ! Clean residual min=-0.002650 max=0.002432 Jy/beam ! Clean residual mean=-0.000007 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.670653 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 134 components and 0.670653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063938Jy sigma=0.970045 ! Fit after self-cal, rms=0.063931Jy sigma=0.970010 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8714 mas, bmaj=2.036 mas, bpa=-2.842 degrees ! Estimated noise=0.604672 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8714 x 2.036 at -2.842 degrees (North through East) ! Clean map min=-0.0021785 max=0.4807 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6809 mas, bmaj=1.695 mas, bpa=-3.43 degrees ! Estimated noise=0.944095 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.367751 Jy ! Component: 100 - total flux cleaned = 0.461511 Jy ! Component: 150 - total flux cleaned = 0.512521 Jy ! Component: 200 - total flux cleaned = 0.545517 Jy ! Total flux subtracted in 200 components = 0.545517 Jy ! Clean residual min=-0.007879 max=0.017660 Jy/beam ! Clean residual mean=0.000019 rms=0.002147 Jy/beam ! Combined flux in latest and established models = 0.545518 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.545518 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8714 mas, bmaj=2.036 mas, bpa=-2.842 degrees ! Estimated noise=0.604672 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0348023 Jy ! Component: 100 - total flux cleaned = 0.0548502 Jy ! Component: 150 - total flux cleaned = 0.0672589 Jy ! Component: 200 - total flux cleaned = 0.0765488 Jy ! Total flux subtracted in 200 components = 0.0765488 Jy ! Clean residual min=-0.003629 max=0.005874 Jy/beam ! Clean residual mean=0.000016 rms=0.001317 Jy/beam ! Combined flux in latest and established models = 0.622066 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 50 components and 0.622066 Jy ! Inverting map ! Added new window around map position (-4.6, 14.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00746749 Jy ! Component: 100 - total flux cleaned = 0.0134931 Jy ! Component: 150 - total flux cleaned = 0.0184473 Jy ! Component: 200 - total flux cleaned = 0.0225919 Jy ! Total flux subtracted in 200 components = 0.0225919 Jy ! Clean residual min=-0.002687 max=0.003357 Jy/beam ! Clean residual mean=0.000007 rms=0.000818 Jy/beam ! Combined flux in latest and established models = 0.644658 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 89 components and 0.644658 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.195 mas, bmaj=4.114 mas, bpa=3.914 degrees ! Estimated noise=0.765106 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00626041 Jy ! Component: 100 - total flux cleaned = 0.0107912 Jy ! Component: 150 - total flux cleaned = 0.0142495 Jy ! Component: 200 - total flux cleaned = 0.0169477 Jy ! Total flux subtracted in 200 components = 0.0169477 Jy ! Clean residual min=-0.002586 max=0.002880 Jy/beam ! Clean residual mean=0.000000 rms=0.000804 Jy/beam ! Combined flux in latest and established models = 0.661606 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00212512 Jy ! Component: 100 - total flux cleaned = 0.00380939 Jy ! Component: 150 - total flux cleaned = 0.00515033 Jy ! Component: 200 - total flux cleaned = 0.0062202 Jy ! Total flux subtracted in 200 components = 0.0062202 Jy ! Clean residual min=-0.002472 max=0.002427 Jy/beam ! Clean residual mean=-0.000005 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 0.667826 Jy ! Adding 103 model components to the UV plane model. ! The established model now contains 182 components and 0.667826 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8714 mas, bmaj=2.036 mas, bpa=-2.842 degrees ! Estimated noise=0.604672 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000479426 Jy ! Component: 100 - total flux cleaned = 0.000653233 Jy ! Component: 150 - total flux cleaned = 0.000850075 Jy ! Component: 200 - total flux cleaned = 0.00106885 Jy ! Total flux subtracted in 200 components = 0.00106885 Jy ! Clean residual min=-0.002272 max=0.002180 Jy/beam ! Clean residual mean=-0.000003 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.668895 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 203 components and 0.668895 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063939Jy sigma=0.970225 ! Fit after self-cal, rms=0.063899Jy sigma=0.969831 wmodel J2236-1433_X_map.mod ! Writing 203 model components to file: J2236-1433_X_map.mod wobs J2236-1433_X_uvs.fits ! Writing UV FITS file: J2236-1433_X_uvs.fits wwins J2236-1433_X_map.win ! wwins: Wrote 5 windows to J2236-1433_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000292195 Jy ! Component: 100 - total flux cleaned = -0.000367727 Jy ! Component: 150 - total flux cleaned = -0.00029433 Jy ! Component: 200 - total flux cleaned = -0.000189016 Jy ! Component: 250 - total flux cleaned = -1.77938e-05 Jy ! Component: 300 - total flux cleaned = 8.22573e-05 Jy ! Component: 350 - total flux cleaned = 8.22039e-05 Jy ! Component: 400 - total flux cleaned = 0.000146235 Jy ! Component: 450 - total flux cleaned = 0.00014659 Jy ! Component: 500 - total flux cleaned = 0.000269721 Jy ! Component: 550 - total flux cleaned = 0.000300029 Jy ! Component: 600 - total flux cleaned = 0.000329983 Jy ! Component: 650 - total flux cleaned = 0.000301477 Jy ! Component: 700 - total flux cleaned = 0.000330665 Jy ! Component: 750 - total flux cleaned = 0.000473069 Jy ! Component: 800 - total flux cleaned = 0.000557089 Jy ! Component: 850 - total flux cleaned = 0.000696263 Jy ! Component: 900 - total flux cleaned = 0.000806317 Jy ! Component: 950 - total flux cleaned = 0.000941974 Jy ! Component: 1000 - total flux cleaned = 0.0011027 Jy ! Component: 1050 - total flux cleaned = 0.00126094 Jy ! Component: 1100 - total flux cleaned = 0.00136532 Jy ! Component: 1150 - total flux cleaned = 0.00139117 Jy ! Component: 1200 - total flux cleaned = 0.00151954 Jy ! Component: 1250 - total flux cleaned = 0.00167123 Jy ! Component: 1300 - total flux cleaned = 0.00169662 Jy ! Component: 1350 - total flux cleaned = 0.00184518 Jy ! Component: 1400 - total flux cleaned = 0.00189426 Jy ! Component: 1450 - total flux cleaned = 0.00194255 Jy ! Component: 1500 - total flux cleaned = 0.00196664 Jy ! Component: 1550 - total flux cleaned = 0.00208557 Jy ! Component: 1600 - total flux cleaned = 0.00210915 Jy ! Component: 1650 - total flux cleaned = 0.00220275 Jy ! Component: 1700 - total flux cleaned = 0.00227255 Jy ! Component: 1750 - total flux cleaned = 0.00236462 Jy ! Component: 1800 - total flux cleaned = 0.00240985 Jy ! Component: 1850 - total flux cleaned = 0.00243227 Jy ! Component: 1900 - total flux cleaned = 0.00241003 Jy ! Component: 1950 - total flux cleaned = 0.00252119 Jy ! Component: 2000 - total flux cleaned = 0.00252112 Jy ! Component: 2050 - total flux cleaned = 0.00254284 Jy ! Component: 2100 - total flux cleaned = 0.00258635 Jy ! Component: 2150 - total flux cleaned = 0.00265107 Jy ! Component: 2200 - total flux cleaned = 0.00271487 Jy ! Component: 2250 - total flux cleaned = 0.00269353 Jy ! Component: 2300 - total flux cleaned = 0.00275633 Jy ! Component: 2350 - total flux cleaned = 0.00279792 Jy ! Component: 2400 - total flux cleaned = 0.00281869 Jy ! Component: 2450 - total flux cleaned = 0.00281877 Jy ! Component: 2500 - total flux cleaned = 0.00283918 Jy ! Component: 2550 - total flux cleaned = 0.0028797 Jy ! Component: 2600 - total flux cleaned = 0.00287964 Jy ! Component: 2650 - total flux cleaned = 0.00295952 Jy ! Component: 2700 - total flux cleaned = 0.0030186 Jy ! Component: 2750 - total flux cleaned = 0.00297917 Jy ! Component: 2800 - total flux cleaned = 0.00307675 Jy ! Component: 2850 - total flux cleaned = 0.00307655 Jy ! Component: 2900 - total flux cleaned = 0.0031536 Jy ! Component: 2950 - total flux cleaned = 0.00326843 Jy ! Component: 3000 - total flux cleaned = 0.00323028 Jy ! Component: 3050 - total flux cleaned = 0.00326787 Jy ! Component: 3100 - total flux cleaned = 0.00334306 Jy ! Component: 3150 - total flux cleaned = 0.0032495 Jy ! Component: 3200 - total flux cleaned = 0.00332386 Jy ! Component: 3250 - total flux cleaned = 0.00330545 Jy ! Component: 3300 - total flux cleaned = 0.00332395 Jy ! Component: 3350 - total flux cleaned = 0.00339705 Jy ! Component: 3400 - total flux cleaned = 0.00346969 Jy ! Component: 3450 - total flux cleaned = 0.00357788 Jy ! Component: 3500 - total flux cleaned = 0.00356004 Jy ! Component: 3550 - total flux cleaned = 0.0035778 Jy ! Component: 3600 - total flux cleaned = 0.00370208 Jy ! Component: 3650 - total flux cleaned = 0.00379031 Jy ! Component: 3700 - total flux cleaned = 0.0037904 Jy ! Component: 3750 - total flux cleaned = 0.00377294 Jy ! Component: 3800 - total flux cleaned = 0.00385984 Jy ! Component: 3850 - total flux cleaned = 0.00389457 Jy ! Component: 3900 - total flux cleaned = 0.00392898 Jy ! Component: 3950 - total flux cleaned = 0.00403172 Jy ! Component: 4000 - total flux cleaned = 0.00404864 Jy ! Component: 4050 - total flux cleaned = 0.0040657 Jy ! Total flux subtracted in 4096 components = 0.00408259 Jy ! Clean residual min=-0.001148 max=0.000962 Jy/beam ! Clean residual mean=-0.000001 rms=0.000292 Jy/beam ! Combined flux in latest and established models = 0.672978 Jy keep ! Adding 310 model components to the UV plane model. ! The established model now contains 513 components and 0.672978 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv117_uvs/J2236-1433_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8714 x 2.036 at -2.842 degrees (North through East) ! Clean map min=-0.0014837 max=0.4824 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv117_uvs/J2236-1433_X_map.fits wmodel /scr/pima/rv117_uvs/J2236-1433_X_map.mod ! Writing 513 model components to file: /scr/pima/rv117_uvs/J2236-1433_X_map.mod wobs /scr/pima/rv117_uvs/J2236-1433_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv117_uvs/J2236-1433_X_uvs.fits wwins /scr/pima/rv117_uvs/J2236-1433_X_map.win ! wwins: Wrote 6 windows to /scr/pima/rv117_uvs/J2236-1433_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.4824 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000289871 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.180268 0.180268 0.360536 0.721072 1.44214 2.88429 5.76858 11.5372 23.0743 46.1486 92.2972 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.482 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1664.19 quit ! Quitting program ! Log file /scr/pima/rv117_uvs/J2236-1433_X_dfm.log closed on Sat Dec 9 23:46:47 2017