! Started logfile: /scr/pima/rv117_uvs/J2236-1433_S_dfm.log on Sat Dec 9 23:47:05 2017 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23275 obs /scr/pima/rv117_uvs/J2236-1433_S_uva.fits ! Reading UV FITS file: /scr/pima/rv117_uvs/J2236-1433_S_uva.fits ! AN table 1: 28 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J2236-1433 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23275e+09 8e+06 1 8e+06 ! 02 2 2.26275e+09 8e+06 1 8e+06 ! 03 3 2.35275e+09 8e+06 1 8e+06 ! 04 4 2.37275e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 74 lines of history. ! ! Reading 5040 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2236-1433_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.086681Jy sigma=17.680174 ! Fit after self-cal, rms=0.588045Jy sigma=9.535315 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.596 mas, bmaj=6.48 mas, bpa=-4.278 degrees ! Estimated noise=1.00264 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.303107 Jy ! Component: 100 - total flux cleaned = 0.391014 Jy ! Total flux subtracted in 100 components = 0.391014 Jy ! Clean residual min=-0.017010 max=0.039445 Jy/beam ! Clean residual mean=-0.000029 rms=0.004805 Jy/beam ! Combined flux in latest and established models = 0.391014 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.391014 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117754Jy sigma=1.955145 ! Fit after self-cal, rms=0.117695Jy sigma=1.954708 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0441186 Jy ! Component: 100 - total flux cleaned = 0.067969 Jy ! Total flux subtracted in 100 components = 0.067969 Jy ! Clean residual min=-0.011836 max=0.023740 Jy/beam ! Clean residual mean=-0.000026 rms=0.003502 Jy/beam ! Combined flux in latest and established models = 0.458983 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 15 components and 0.458983 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089466Jy sigma=1.533229 ! Fit after self-cal, rms=0.089413Jy sigma=1.532775 ! Inverting map ! Added new window around map position (5.5, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0232688 Jy ! Component: 100 - total flux cleaned = 0.0366808 Jy ! Total flux subtracted in 100 components = 0.0366808 Jy ! Clean residual min=-0.010188 max=0.016623 Jy/beam ! Clean residual mean=-0.000023 rms=0.003003 Jy/beam ! Combined flux in latest and established models = 0.495664 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 29 components and 0.495664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079370Jy sigma=1.385034 ! Fit after self-cal, rms=0.078412Jy sigma=1.371605 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.206 mas, bmaj=7.548 mas, bpa=-2.324 degrees ! Estimated noise=0.62712 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0203479 Jy ! Component: 100 - total flux cleaned = 0.032402 Jy ! Component: 150 - total flux cleaned = 0.040042 Jy ! Component: 200 - total flux cleaned = 0.045055 Jy ! Total flux subtracted in 200 components = 0.045055 Jy ! Clean residual min=-0.008663 max=0.018056 Jy/beam ! Clean residual mean=-0.000037 rms=0.003317 Jy/beam ! Combined flux in latest and established models = 0.540719 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 55 components and 0.540719 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072328Jy sigma=1.294140 ! Fit after self-cal, rms=0.071893Jy sigma=1.287077 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.206 x 7.548 at -2.324 degrees (North through East) ! Clean map min=-0.0081502 max=0.40744 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.95 HN 1.05 KP 0.96 ! LA 0.96 MK 0.98 NL 1.23 OV 0.96 ! PT 0.94 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.97 HN 1.09 KP 0.99 ! LA 0.93 MK 0.97 NL 1.44 OV 1.00 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.97 HN 1.08 KP 0.97 ! LA 0.96 MK 1.00 NL 0.96 OV 1.00 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.07 KP 0.99 ! LA 0.97 MK 1.02 NL 0.95 OV 0.96 ! PT 0.96 SC 1.03 ! ! ! Fit before self-cal, rms=0.071893Jy sigma=1.287077 ! Fit after self-cal, rms=0.070332Jy sigma=1.019160 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.219 mas, bmaj=7.565 mas, bpa=-2.198 degrees ! Estimated noise=0.630476 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00395817 Jy ! Component: 100 - total flux cleaned = -0.00409488 Jy ! Component: 150 - total flux cleaned = -0.00432073 Jy ! Component: 200 - total flux cleaned = -0.00441411 Jy ! Total flux subtracted in 200 components = -0.00441411 Jy ! Clean residual min=-0.009388 max=0.010450 Jy/beam ! Clean residual mean=-0.000024 rms=0.002163 Jy/beam ! Combined flux in latest and established models = 0.536305 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 71 components and 0.536305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069474Jy sigma=1.011893 ! Fit after self-cal, rms=0.069417Jy sigma=1.010393 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069417Jy sigma=1.010393 ! Fit after self-cal, rms=0.052482Jy sigma=0.793025 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.217 mas, bmaj=7.567 mas, bpa=-2.077 degrees ! Estimated noise=0.627076 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00240237 Jy ! Component: 100 - total flux cleaned = 0.00259266 Jy ! Component: 150 - total flux cleaned = 0.00259568 Jy ! Component: 200 - total flux cleaned = 0.00264952 Jy ! Total flux subtracted in 200 components = 0.00264952 Jy ! Clean residual min=-0.002910 max=0.004282 Jy/beam ! Clean residual mean=-0.000010 rms=0.000807 Jy/beam ! Combined flux in latest and established models = 0.538955 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 83 components and 0.538955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052226Jy sigma=0.788426 ! Fit after self-cal, rms=0.052216Jy sigma=0.787843 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-11.5, 3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00407444 Jy ! Component: 100 - total flux cleaned = 0.00654287 Jy ! Component: 150 - total flux cleaned = 0.00796154 Jy ! Component: 200 - total flux cleaned = 0.00887566 Jy ! Total flux subtracted in 200 components = 0.00887566 Jy ! Clean residual min=-0.002571 max=0.002701 Jy/beam ! Clean residual mean=-0.000006 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.54783 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 107 components and 0.54783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051855Jy sigma=0.781343 ! Fit after self-cal, rms=0.051827Jy sigma=0.780935 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051827Jy sigma=0.780935 ! Fit after self-cal, rms=0.051619Jy sigma=0.779592 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.215 mas, bmaj=7.561 mas, bpa=-2.093 degrees ! Estimated noise=0.626201 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00215653 Jy ! Component: 100 - total flux cleaned = 0.00330107 Jy ! Component: 150 - total flux cleaned = 0.00398876 Jy ! Component: 200 - total flux cleaned = 0.00431207 Jy ! Total flux subtracted in 200 components = 0.00431207 Jy ! Clean residual min=-0.002396 max=0.002364 Jy/beam ! Clean residual mean=-0.000005 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.552142 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 113 components and 0.552142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051491Jy sigma=0.777270 ! Fit after self-cal, rms=0.051485Jy sigma=0.777198 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000364863 Jy ! Component: 100 - total flux cleaned = 0.000525101 Jy ! Component: 150 - total flux cleaned = 0.000673495 Jy ! Component: 200 - total flux cleaned = 0.000741756 Jy ! Total flux subtracted in 200 components = 0.000741756 Jy ! Clean residual min=-0.002338 max=0.002331 Jy/beam ! Clean residual mean=-0.000004 rms=0.000557 Jy/beam ! Combined flux in latest and established models = 0.552884 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 120 components and 0.552884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051434Jy sigma=0.776365 ! Fit after self-cal, rms=0.051432Jy sigma=0.776347 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051432Jy sigma=0.776347 ! Fit after self-cal, rms=0.051329Jy sigma=0.775944 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.609 mas, bmaj=14.31 mas, bpa=4.552 degrees ! Estimated noise=0.795455 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00176922 Jy ! Component: 100 - total flux cleaned = 0.00282146 Jy ! Component: 150 - total flux cleaned = 0.00319115 Jy ! Component: 200 - total flux cleaned = 0.00332118 Jy ! Total flux subtracted in 200 components = 0.00332118 Jy ! Clean residual min=-0.002420 max=0.003290 Jy/beam ! Clean residual mean=-0.000005 rms=0.000753 Jy/beam ! Combined flux in latest and established models = 0.556205 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 130 components and 0.556205 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051302Jy sigma=0.775470 ! Fit after self-cal, rms=0.051299Jy sigma=0.775447 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-59.5, 51.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00301447 Jy ! Component: 100 - total flux cleaned = 0.00434717 Jy ! Component: 150 - total flux cleaned = 0.00501078 Jy ! Component: 200 - total flux cleaned = 0.00553832 Jy ! Total flux subtracted in 200 components = 0.00553832 Jy ! Clean residual min=-0.002276 max=0.001907 Jy/beam ! Clean residual mean=-0.000004 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.561744 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 186 components and 0.561744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051206Jy sigma=0.773523 ! Fit after self-cal, rms=0.051202Jy sigma=0.773426 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.212 mas, bmaj=7.556 mas, bpa=-2.094 degrees ! Estimated noise=0.625636 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.212 x 7.556 at -2.094 degrees (North through East) ! Clean map min=-0.0020181 max=0.40854 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.596 mas, bmaj=6.473 mas, bpa=-4.039 degrees ! Estimated noise=1.00476 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.303628 Jy ! Component: 100 - total flux cleaned = 0.39259 Jy ! Component: 150 - total flux cleaned = 0.437868 Jy ! Component: 200 - total flux cleaned = 0.466921 Jy ! Total flux subtracted in 200 components = 0.466921 Jy ! Clean residual min=-0.006813 max=0.015601 Jy/beam ! Clean residual mean=-0.000012 rms=0.002085 Jy/beam ! Combined flux in latest and established models = 0.466921 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.466921 Jy ! Inverting map and beam ! Estimated beam: bmin=3.212 mas, bmaj=7.556 mas, bpa=-2.094 degrees ! Estimated noise=0.625636 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0292676 Jy ! Component: 100 - total flux cleaned = 0.0455911 Jy ! Component: 150 - total flux cleaned = 0.0554202 Jy ! Component: 200 - total flux cleaned = 0.0619438 Jy ! Total flux subtracted in 200 components = 0.0619438 Jy ! Clean residual min=-0.002878 max=0.004204 Jy/beam ! Clean residual mean=-0.000010 rms=0.000992 Jy/beam ! Combined flux in latest and established models = 0.528865 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 60 components and 0.528865 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.609 mas, bmaj=14.31 mas, bpa=4.552 degrees ! Estimated noise=0.795455 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00834927 Jy ! Component: 100 - total flux cleaned = 0.0138477 Jy ! Component: 150 - total flux cleaned = 0.0178716 Jy ! Component: 200 - total flux cleaned = 0.0209718 Jy ! Total flux subtracted in 200 components = 0.0209718 Jy ! Clean residual min=-0.002761 max=0.002236 Jy/beam ! Clean residual mean=-0.000006 rms=0.000829 Jy/beam ! Combined flux in latest and established models = 0.549837 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00245615 Jy ! Component: 100 - total flux cleaned = 0.00442519 Jy ! Component: 150 - total flux cleaned = 0.00601782 Jy ! Component: 200 - total flux cleaned = 0.00733711 Jy ! Total flux subtracted in 200 components = 0.00733711 Jy ! Clean residual min=-0.002257 max=0.001814 Jy/beam ! Clean residual mean=-0.000003 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.557174 Jy ! Adding 135 model components to the UV plane model. ! The established model now contains 179 components and 0.557174 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.212 mas, bmaj=7.556 mas, bpa=-2.094 degrees ! Estimated noise=0.625636 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118091 Jy ! Component: 100 - total flux cleaned = 0.00186001 Jy ! Component: 150 - total flux cleaned = 0.00240987 Jy ! Component: 200 - total flux cleaned = 0.00285198 Jy ! Total flux subtracted in 200 components = 0.00285198 Jy ! Clean residual min=-0.001995 max=0.001915 Jy/beam ! Clean residual mean=-0.000001 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.560026 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 200 components and 0.560026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051218Jy sigma=0.774130 ! Fit after self-cal, rms=0.051197Jy sigma=0.773759 wmodel J2236-1433_S_map.mod ! Writing 200 model components to file: J2236-1433_S_map.mod wobs J2236-1433_S_uvs.fits ! Writing UV FITS file: J2236-1433_S_uvs.fits wwins J2236-1433_S_map.win ! wwins: Wrote 4 windows to J2236-1433_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000221978 Jy ! Component: 100 - total flux cleaned = 0.000620915 Jy ! Component: 150 - total flux cleaned = 0.000810884 Jy ! Component: 200 - total flux cleaned = 0.000993495 Jy ! Component: 250 - total flux cleaned = 0.00113949 Jy ! Component: 300 - total flux cleaned = 0.00119625 Jy ! Component: 350 - total flux cleaned = 0.00127881 Jy ! Component: 400 - total flux cleaned = 0.00133249 Jy ! Component: 450 - total flux cleaned = 0.00135903 Jy ! Component: 500 - total flux cleaned = 0.00143573 Jy ! Component: 550 - total flux cleaned = 0.00150992 Jy ! Component: 600 - total flux cleaned = 0.00146108 Jy ! Component: 650 - total flux cleaned = 0.0014374 Jy ! Component: 700 - total flux cleaned = 0.00148461 Jy ! Component: 750 - total flux cleaned = 0.00136885 Jy ! Component: 800 - total flux cleaned = 0.00139193 Jy ! Component: 850 - total flux cleaned = 0.00132446 Jy ! Component: 900 - total flux cleaned = 0.00125847 Jy ! Component: 950 - total flux cleaned = 0.00119332 Jy ! Component: 1000 - total flux cleaned = 0.00108581 Jy ! Component: 1050 - total flux cleaned = 0.000980155 Jy ! Component: 1100 - total flux cleaned = 0.000980161 Jy ! Component: 1150 - total flux cleaned = 0.00089711 Jy ! Component: 1200 - total flux cleaned = 0.000774189 Jy ! Component: 1250 - total flux cleaned = 0.000734028 Jy ! Component: 1300 - total flux cleaned = 0.000633984 Jy ! Component: 1350 - total flux cleaned = 0.00051598 Jy ! Component: 1400 - total flux cleaned = 0.000419126 Jy ! Component: 1450 - total flux cleaned = 0.000400248 Jy ! Component: 1500 - total flux cleaned = 0.000400385 Jy ! Component: 1550 - total flux cleaned = 0.000306347 Jy ! Component: 1600 - total flux cleaned = 0.000269068 Jy ! Component: 1650 - total flux cleaned = 0.000213669 Jy ! Component: 1700 - total flux cleaned = 8.65008e-05 Jy ! Component: 1750 - total flux cleaned = 0.0001588 Jy ! Component: 1800 - total flux cleaned = 5.19796e-05 Jy ! Component: 1850 - total flux cleaned = 3.46898e-05 Jy ! Component: 1900 - total flux cleaned = -1.92673e-07 Jy ! Component: 1950 - total flux cleaned = -5.21668e-05 Jy ! Component: 2000 - total flux cleaned = -0.000171746 Jy ! Component: 2050 - total flux cleaned = -0.000188553 Jy ! Component: 2100 - total flux cleaned = -0.000255403 Jy ! Component: 2150 - total flux cleaned = -0.000272096 Jy ! Component: 2200 - total flux cleaned = -0.000370691 Jy ! Component: 2250 - total flux cleaned = -0.000403167 Jy ! Component: 2300 - total flux cleaned = -0.000515931 Jy ! Component: 2350 - total flux cleaned = -0.00058004 Jy ! Component: 2400 - total flux cleaned = -0.000674976 Jy ! Component: 2450 - total flux cleaned = -0.00073733 Jy ! Component: 2500 - total flux cleaned = -0.00072161 Jy ! Component: 2550 - total flux cleaned = -0.000844795 Jy ! Component: 2600 - total flux cleaned = -0.000844788 Jy ! Component: 2650 - total flux cleaned = -0.000890305 Jy ! Component: 2700 - total flux cleaned = -0.000920224 Jy ! Component: 2750 - total flux cleaned = -0.00103876 Jy ! Component: 2800 - total flux cleaned = -0.00103871 Jy ! Component: 2850 - total flux cleaned = -0.00100952 Jy ! Component: 2900 - total flux cleaned = -0.00103844 Jy ! Component: 2950 - total flux cleaned = -0.0010385 Jy ! Component: 3000 - total flux cleaned = -0.00105277 Jy ! Component: 3050 - total flux cleaned = -0.00113763 Jy ! Component: 3100 - total flux cleaned = -0.00116564 Jy ! Component: 3150 - total flux cleaned = -0.00113781 Jy ! Component: 3200 - total flux cleaned = -0.00113801 Jy ! Component: 3250 - total flux cleaned = -0.00116526 Jy ! Component: 3300 - total flux cleaned = -0.0011245 Jy ! Component: 3350 - total flux cleaned = -0.00117817 Jy ! Component: 3400 - total flux cleaned = -0.00112474 Jy ! Component: 3450 - total flux cleaned = -0.00109824 Jy ! Component: 3500 - total flux cleaned = -0.00113771 Jy ! Component: 3550 - total flux cleaned = -0.00108538 Jy ! Component: 3600 - total flux cleaned = -0.00116327 Jy ! Component: 3650 - total flux cleaned = -0.0011117 Jy ! Component: 3700 - total flux cleaned = -0.00111178 Jy ! Component: 3750 - total flux cleaned = -0.00103556 Jy ! Component: 3800 - total flux cleaned = -0.00107342 Jy ! Component: 3850 - total flux cleaned = -0.00103605 Jy ! Component: 3900 - total flux cleaned = -0.00106095 Jy ! Component: 3950 - total flux cleaned = -0.00107318 Jy ! Component: 4000 - total flux cleaned = -0.00106087 Jy ! Component: 4050 - total flux cleaned = -0.00108532 Jy ! Total flux subtracted in 4096 components = -0.00108526 Jy ! Clean residual min=-0.000730 max=0.000770 Jy/beam ! Clean residual mean=0.000001 rms=0.000219 Jy/beam ! Combined flux in latest and established models = 0.558941 Jy keep ! Adding 272 model components to the UV plane model. ! The established model now contains 472 components and 0.558941 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv117_uvs/J2236-1433_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.212 x 7.556 at -2.094 degrees (North through East) ! Clean map min=-0.0012285 max=0.40973 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv117_uvs/J2236-1433_S_map.fits wmodel /scr/pima/rv117_uvs/J2236-1433_S_map.mod ! Writing 472 model components to file: /scr/pima/rv117_uvs/J2236-1433_S_map.mod wobs /scr/pima/rv117_uvs/J2236-1433_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv117_uvs/J2236-1433_S_uvs.fits wwins /scr/pima/rv117_uvs/J2236-1433_S_map.win ! wwins: Wrote 5 windows to /scr/pima/rv117_uvs/J2236-1433_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.40973 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000218858 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.160246 0.160246 0.320491 0.640983 1.28197 2.56393 5.12786 10.2557 20.5114 41.0229 82.0458 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.409 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1872.12 quit ! Quitting program ! Log file /scr/pima/rv117_uvs/J2236-1433_S_dfm.log closed on Sat Dec 9 23:47:09 2017