! Started logfile: /scr/pima/rv117_uvs/J2025+3343_X_dfm.log on Sat Dec 9 23:46:07 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv117_uvs/J2025+3343_X_uva.fits ! Reading UV FITS file: /scr/pima/rv117_uvs/J2025+3343_X_uva.fits ! AN table 1: 3 integrations on 21 of 21 possible baselines. ! AN table 2: 14 integrations on 21 of 21 possible baselines. ! AN table 3: 123 integrations on 45 of 45 possible baselines. ! AN table 4: 6 integrations on 21 of 21 possible baselines. ! AN table 5: 3 integrations on 10 of 10 possible baselines. ! AN table 6: 3 integrations on 6 of 6 possible baselines. ! Apparent sampling: 0.152654 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2025+3343 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 74 lines of history. ! ! Reading 3704 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2025+3343_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 54 telescope corrections were flagged in sub-array 2. ! A total of 1073 telescope corrections were flagged in sub-array 3. ! A total of 8 telescope corrections were flagged in sub-array 4. ! A total of 5 telescope corrections were flagged in sub-array 5. ! A total of 1 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 2. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 54 telescope corrections were flagged in sub-array 2. ! A total of 1073 telescope corrections were flagged in sub-array 3. ! A total of 8 telescope corrections were flagged in sub-array 4. ! A total of 5 telescope corrections were flagged in sub-array 5. ! A total of 1 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 3. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 54 telescope corrections were flagged in sub-array 2. ! A total of 1073 telescope corrections were flagged in sub-array 3. ! A total of 8 telescope corrections were flagged in sub-array 4. ! A total of 5 telescope corrections were flagged in sub-array 5. ! A total of 1 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 4. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 54 telescope corrections were flagged in sub-array 2. ! A total of 1073 telescope corrections were flagged in sub-array 3. ! A total of 8 telescope corrections were flagged in sub-array 4. ! A total of 5 telescope corrections were flagged in sub-array 5. ! A total of 1 telescope corrections were flagged in sub-array 6. ! ! Fit before self-cal, rms=1.169843Jy sigma=17.320239 ! Fit after self-cal, rms=0.689701Jy sigma=11.031260 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.299% of the data. ! The x-axis pixel size should ideally be below 0.1702 milli-arcsec ! Estimated beam: bmin=0.6878 mas, bmaj=1.065 mas, bpa=-5.799 degrees ! Estimated noise=1.23454 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.272379 Jy ! Component: 100 - total flux cleaned = 0.435919 Jy ! Total flux subtracted in 100 components = 0.435919 Jy ! Clean residual min=-0.025499 max=0.090094 Jy/beam ! Clean residual mean=0.000470 rms=0.009006 Jy/beam ! Combined flux in latest and established models = 0.435919 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.435919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.325376Jy sigma=4.669723 ! Fit after self-cal, rms=0.324934Jy sigma=4.665078 ! Inverting map ! Your choice of large map pixels excluded 0.299% of the data. ! The x-axis pixel size should ideally be below 0.1702 milli-arcsec ! Added new window around map position (-0.8, -0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.115975 Jy ! Component: 100 - total flux cleaned = 0.2016 Jy ! Total flux subtracted in 100 components = 0.2016 Jy ! Clean residual min=-0.021168 max=0.060280 Jy/beam ! Clean residual mean=0.000329 rms=0.006166 Jy/beam ! Combined flux in latest and established models = 0.637519 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 50 components and 0.637519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227457Jy sigma=3.243992 ! Fit after self-cal, rms=0.226650Jy sigma=3.235129 ! Inverting map ! Your choice of large map pixels excluded 0.299% of the data. ! The x-axis pixel size should ideally be below 0.1702 milli-arcsec ! Added new window around map position (0.4, 1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.070274 Jy ! Component: 100 - total flux cleaned = 0.124372 Jy ! Total flux subtracted in 100 components = 0.124372 Jy ! Clean residual min=-0.017478 max=0.044273 Jy/beam ! Clean residual mean=0.000243 rms=0.004672 Jy/beam ! Combined flux in latest and established models = 0.761891 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 62 components and 0.761891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.174052Jy sigma=2.474136 ! Fit after self-cal, rms=0.173257Jy sigma=2.465897 ! Inverting map ! Your choice of large map pixels excluded 0.299% of the data. ! The x-axis pixel size should ideally be below 0.1702 milli-arcsec ! Added new window around map position (-0.8, 1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0469924 Jy ! Component: 100 - total flux cleaned = 0.0835433 Jy ! Total flux subtracted in 100 components = 0.0835433 Jy ! Clean residual min=-0.014561 max=0.035289 Jy/beam ! Clean residual mean=0.000185 rms=0.003790 Jy/beam ! Combined flux in latest and established models = 0.845434 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 82 components and 0.845434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141468Jy sigma=2.014141 ! Fit after self-cal, rms=0.140670Jy sigma=2.003259 ! Inverting map ! Your choice of large map pixels excluded 0.299% of the data. ! The x-axis pixel size should ideally be below 0.1702 milli-arcsec ! Added new window around map position (1.2, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0365958 Jy ! Component: 100 - total flux cleaned = 0.0659811 Jy ! Total flux subtracted in 100 components = 0.0659811 Jy ! Clean residual min=-0.011219 max=0.023190 Jy/beam ! Clean residual mean=0.000140 rms=0.003062 Jy/beam ! Combined flux in latest and established models = 0.911415 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 98 components and 0.911415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118069Jy sigma=1.682085 ! Fit after self-cal, rms=0.117816Jy sigma=1.678768 ! Inverting map ! Your choice of large map pixels excluded 0.299% of the data. ! The x-axis pixel size should ideally be below 0.1702 milli-arcsec ! Added new window around map position (0, -1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0269376 Jy ! Component: 100 - total flux cleaned = 0.0494852 Jy ! Total flux subtracted in 100 components = 0.0494852 Jy ! Clean residual min=-0.009737 max=0.017048 Jy/beam ! Clean residual mean=0.000106 rms=0.002616 Jy/beam ! Combined flux in latest and established models = 0.9609 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 116 components and 0.960901 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103180Jy sigma=1.469046 ! Fit after self-cal, rms=0.103047Jy sigma=1.467916 ! Inverting map ! Your choice of large map pixels excluded 0.299% of the data. ! The x-axis pixel size should ideally be below 0.1702 milli-arcsec ! Added new window around map position (-0.4, 2.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0206043 Jy ! Component: 100 - total flux cleaned = 0.0382485 Jy ! Total flux subtracted in 100 components = 0.0382485 Jy ! Clean residual min=-0.008703 max=0.014074 Jy/beam ! Clean residual mean=0.000079 rms=0.002307 Jy/beam ! Combined flux in latest and established models = 0.999149 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 134 components and 0.999149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093613Jy sigma=1.331031 ! Fit after self-cal, rms=0.093500Jy sigma=1.329722 ! Inverting map ! Your choice of large map pixels excluded 0.299% of the data. ! The x-axis pixel size should ideally be below 0.1702 milli-arcsec ! Added new window around map position (-1.8, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0165278 Jy ! Component: 100 - total flux cleaned = 0.0307373 Jy ! Total flux subtracted in 100 components = 0.0307373 Jy ! Clean residual min=-0.008337 max=0.010255 Jy/beam ! Clean residual mean=0.000057 rms=0.002084 Jy/beam ! Combined flux in latest and established models = 1.02989 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 148 components and 1.02989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086907Jy sigma=1.232512 ! Fit after self-cal, rms=0.086854Jy sigma=1.231892 ! Inverting map ! Your choice of large map pixels excluded 0.299% of the data. ! The x-axis pixel size should ideally be below 0.1702 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.299% of the data. ! The x-axis pixel size should ideally be below 0.1702 milli-arcsec ! Estimated beam: bmin=0.7607 mas, bmaj=1.285 mas, bpa=-0.3396 degrees ! Estimated noise=0.919845 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0225189 Jy ! Component: 100 - total flux cleaned = 0.0397532 Jy ! Component: 150 - total flux cleaned = 0.0535022 Jy ! Component: 200 - total flux cleaned = 0.0646303 Jy ! Total flux subtracted in 200 components = 0.0646303 Jy ! Clean residual min=-0.008897 max=0.009170 Jy/beam ! Clean residual mean=0.000162 rms=0.001937 Jy/beam ! Combined flux in latest and established models = 1.09452 Jy ! Performing phase self-cal ! Adding 72 model components to the UV plane model. ! The established model now contains 188 components and 1.09452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077575Jy sigma=1.088538 ! Fit after self-cal, rms=0.077442Jy sigma=1.087077 ! Inverting map ! Your choice of large map pixels excluded 0.299% of the data. ! The x-axis pixel size should ideally be below 0.1702 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7607 x 1.285 at -0.3396 degrees (North through East) ! Clean map min=-0.0082166 max=0.30019 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 0.96 KP 0.96 LA 0.96 ! MK 1.15 OV 0.96 PT 0.96 ! ! A total of 30 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 KP 0.96 LA 1.04 MK 1.10 ! NL 1.06 OV 1.00 PT 0.99 ! ! A total of 45 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.12 FD 1.01 HN 1.08 LA 0.99 ! NL 0.97 NY 1.09 ON 0.94 PT 1.00 ! SC 1.08 WZ 1.04 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.10 FD 1.01 HN 1.10 KP 1.02 ! LA 0.97 NL 0.98 SC 1.25 ! ! Telescope amplitude corrections in sub-array 5: ! HN 1.28 MK 1.17 NL 0.85 SC 1.23 ! WZ 1.65 ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.98 MK 1.29 NY 1.43 OV 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.98 KP 0.94 LA 0.94 ! MK 1.26 OV 0.96 PT 0.95 ! ! A total of 30 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 KP 0.95 LA 1.02 MK 1.07 ! NL 1.07 OV 0.96 PT 1.00 ! ! A total of 45 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.12 FD 0.99 HN 1.07 LA 0.97 ! NL 0.99 NY 1.03 ON 0.94 PT 1.00 ! SC 1.08 WZ 1.04 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.08 FD 1.00 HN 1.06 KP 1.02 ! LA 0.95 NL 0.96 SC 1.01 ! ! Telescope amplitude corrections in sub-array 5: ! HN 1.18 MK 1.02 NL 0.90 SC 1.26 ! WZ 1.08 ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.97 MK 1.18 NY 0.95 OV 1.09 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.97 KP 0.95 LA 0.98 ! MK 0.97 OV 0.94 PT 0.93 ! ! A total of 30 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 KP 0.98 LA 1.07 MK 1.06 ! NL 0.99 OV 0.93 PT 1.02 ! ! A total of 45 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.00 HN 1.04 LA 1.00 ! NL 0.98 NY 0.95 ON 0.97 PT 1.00 ! SC 0.88 WZ 0.98 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.95 FD 1.00 HN 0.97 KP 1.00 ! LA 0.99 NL 0.97 SC 1.11 ! ! Telescope amplitude corrections in sub-array 5: ! HN 0.84 MK 0.86 NL 1.14 SC 1.00 ! WZ 1.15 ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.06 MK 1.05 NY 0.80 OV 0.93 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.97 KP 0.97 LA 0.96 ! MK 0.92 OV 0.95 PT 0.94 ! ! A total of 30 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 KP 0.97 LA 1.03 MK 0.82 ! NL 0.97 OV 0.95 PT 0.97 ! ! A total of 45 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.99 HN 1.00 LA 1.01 ! NL 0.97 NY 0.86 ON 0.94 PT 1.01 ! SC 0.89 WZ 0.95 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.94 FD 0.99 HN 0.98 KP 1.02 ! LA 0.99 NL 0.97 SC 0.93 ! ! Telescope amplitude corrections in sub-array 5: ! HN 0.82 MK 0.92 NL 1.07 SC 0.73 ! WZ 1.04 ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.88 MK 0.92 NY 1.27 OV 1.05 ! ! ! Fit before self-cal, rms=0.077442Jy sigma=1.087077 ! Fit after self-cal, rms=0.070284Jy sigma=0.967863 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.338% of the data. ! The x-axis pixel size should ideally be below 0.1702 milli-arcsec ! Estimated beam: bmin=0.729 mas, bmaj=1.255 mas, bpa=1.601 degrees ! Estimated noise=0.9884 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.2, 6.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00575734 Jy ! Component: 100 - total flux cleaned = 0.00923022 Jy ! Component: 150 - total flux cleaned = 0.0118832 Jy ! Component: 200 - total flux cleaned = 0.0133495 Jy ! Total flux subtracted in 200 components = 0.0133495 Jy ! Clean residual min=-0.004659 max=0.004158 Jy/beam ! Clean residual mean=0.000088 rms=0.001000 Jy/beam ! Combined flux in latest and established models = 1.10787 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 217 components and 1.10787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069665Jy sigma=0.959625 ! Fit after self-cal, rms=0.069623Jy sigma=0.958706 ! Inverting map ! Your choice of large map pixels excluded 0.338% of the data. ! The x-axis pixel size should ideally be below 0.1702 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069623Jy sigma=0.958706 ! Fit after self-cal, rms=0.069978Jy sigma=0.956865 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.338% of the data. ! The x-axis pixel size should ideally be below 0.1702 milli-arcsec ! Estimated beam: bmin=0.7301 mas, bmaj=1.256 mas, bpa=1.62 degrees ! Estimated noise=0.992153 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00277872 Jy ! Component: 100 - total flux cleaned = 0.00474036 Jy ! Component: 150 - total flux cleaned = 0.00563225 Jy ! Component: 200 - total flux cleaned = 0.00619525 Jy ! Total flux subtracted in 200 components = 0.00619525 Jy ! Clean residual min=-0.004536 max=0.003882 Jy/beam ! Clean residual mean=0.000061 rms=0.000949 Jy/beam ! Combined flux in latest and established models = 1.11406 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 223 components and 1.11406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069804Jy sigma=0.954386 ! Fit after self-cal, rms=0.069783Jy sigma=0.954152 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.338% of the data. ! The x-axis pixel size should ideally be below 0.1702 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125278 Jy ! Component: 100 - total flux cleaned = 0.00162693 Jy ! Component: 150 - total flux cleaned = 0.00187146 Jy ! Component: 200 - total flux cleaned = 0.0020555 Jy ! Total flux subtracted in 200 components = 0.0020555 Jy ! Clean residual min=-0.004509 max=0.003826 Jy/beam ! Clean residual mean=0.000051 rms=0.000936 Jy/beam ! Combined flux in latest and established models = 1.11612 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 231 components and 1.11612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069710Jy sigma=0.953089 ! Fit after self-cal, rms=0.069695Jy sigma=0.953006 ! Inverting map ! Your choice of large map pixels excluded 0.338% of the data. ! The x-axis pixel size should ideally be below 0.1702 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069695Jy sigma=0.953006 ! Fit after self-cal, rms=0.070136Jy sigma=0.952825 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.338% of the data. ! The x-axis pixel size should ideally be below 0.1702 milli-arcsec ! Estimated beam: bmin=0.7302 mas, bmaj=1.256 mas, bpa=1.571 degrees ! Estimated noise=0.993703 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154079 Jy ! Component: 100 - total flux cleaned = 0.00234452 Jy ! Component: 150 - total flux cleaned = 0.00265998 Jy ! Component: 200 - total flux cleaned = 0.00286812 Jy ! Total flux subtracted in 200 components = 0.00286812 Jy ! Clean residual min=-0.004364 max=0.003768 Jy/beam ! Clean residual mean=0.000045 rms=0.000922 Jy/beam ! Combined flux in latest and established models = 1.11898 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 236 components and 1.11898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070069Jy sigma=0.951851 ! Fit after self-cal, rms=0.070063Jy sigma=0.951783 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.338% of the data. ! The x-axis pixel size should ideally be below 0.1702 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000228203 Jy ! Component: 100 - total flux cleaned = 0.000433882 Jy ! Component: 150 - total flux cleaned = 0.000550926 Jy ! Component: 200 - total flux cleaned = 0.000625527 Jy ! Total flux subtracted in 200 components = 0.000625527 Jy ! Clean residual min=-0.004357 max=0.003740 Jy/beam ! Clean residual mean=0.000042 rms=0.000916 Jy/beam ! Combined flux in latest and established models = 1.11961 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 242 components and 1.11961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070021Jy sigma=0.951095 ! Fit after self-cal, rms=0.070013Jy sigma=0.951055 ! Inverting map ! Your choice of large map pixels excluded 0.338% of the data. ! The x-axis pixel size should ideally be below 0.1702 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070013Jy sigma=0.951055 ! Fit after self-cal, rms=0.070001Jy sigma=0.950955 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.338% of the data. ! The x-axis pixel size should ideally be below 0.1702 milli-arcsec ! Estimated beam: bmin=2.332 mas, bmaj=3.153 mas, bpa=-78.36 degrees ! Estimated noise=1.4682 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00250387 Jy ! Component: 100 - total flux cleaned = 0.00349852 Jy ! Component: 150 - total flux cleaned = 0.00393786 Jy ! Component: 200 - total flux cleaned = 0.00413991 Jy ! Total flux subtracted in 200 components = 0.00413991 Jy ! Clean residual min=-0.003758 max=0.004443 Jy/beam ! Clean residual mean=0.000079 rms=0.001102 Jy/beam ! Combined flux in latest and established models = 1.12375 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 254 components and 1.12375 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070001Jy sigma=0.950598 ! Fit after self-cal, rms=0.069985Jy sigma=0.950432 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.338% of the data. ! The x-axis pixel size should ideally be below 0.1702 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000289133 Jy ! Component: 100 - total flux cleaned = 0.000569683 Jy ! Component: 150 - total flux cleaned = 0.000655673 Jy ! Component: 200 - total flux cleaned = 0.00078386 Jy ! Total flux subtracted in 200 components = 0.00078386 Jy ! Clean residual min=-0.003704 max=0.004320 Jy/beam ! Clean residual mean=0.000068 rms=0.001083 Jy/beam ! Combined flux in latest and established models = 1.12453 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 261 components and 1.12453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069993Jy sigma=0.950457 ! Fit after self-cal, rms=0.069988Jy sigma=0.950381 ! Inverting map ! Your choice of large map pixels excluded 0.338% of the data. ! The x-axis pixel size should ideally be below 0.1702 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.338% of the data. ! The x-axis pixel size should ideally be below 0.1702 milli-arcsec ! Estimated beam: bmin=0.7301 mas, bmaj=1.256 mas, bpa=1.558 degrees ! Estimated noise=0.993725 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7301 x 1.256 at 1.558 degrees (North through East) ! Clean map min=-0.0036494 max=0.28454 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.338% of the data. ! The x-axis pixel size should ideally be below 0.1702 milli-arcsec ! Estimated beam: bmin=0.6741 mas, bmaj=1.044 mas, bpa=-3.885 degrees ! Estimated noise=1.34497 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.270595 Jy ! Component: 100 - total flux cleaned = 0.437929 Jy ! Component: 150 - total flux cleaned = 0.555485 Jy ! Component: 200 - total flux cleaned = 0.64287 Jy ! Total flux subtracted in 200 components = 0.64287 Jy ! Clean residual min=-0.019174 max=0.050459 Jy/beam ! Clean residual mean=0.000372 rms=0.005904 Jy/beam ! Combined flux in latest and established models = 0.64287 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 54 model components to the UV plane model. ! The established model now contains 54 components and 0.64287 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.338% of the data. ! The x-axis pixel size should ideally be below 0.1702 milli-arcsec ! Estimated beam: bmin=0.7301 mas, bmaj=1.256 mas, bpa=1.558 degrees ! Estimated noise=0.993725 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.11677 Jy ! Component: 100 - total flux cleaned = 0.196529 Jy ! Component: 150 - total flux cleaned = 0.254769 Jy ! Component: 200 - total flux cleaned = 0.298671 Jy ! Total flux subtracted in 200 components = 0.298671 Jy ! Clean residual min=-0.010948 max=0.025408 Jy/beam ! Clean residual mean=0.000905 rms=0.004322 Jy/beam ! Combined flux in latest and established models = 0.941541 Jy ! Adding 92 model components to the UV plane model. ! The established model now contains 128 components and 0.941541 Jy ! Inverting map ! Your choice of large map pixels excluded 0.338% of the data. ! The x-axis pixel size should ideally be below 0.1702 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.033746 Jy ! Component: 100 - total flux cleaned = 0.0600739 Jy ! Component: 150 - total flux cleaned = 0.0807792 Jy ! Component: 200 - total flux cleaned = 0.0971633 Jy ! Total flux subtracted in 200 components = 0.0971633 Jy ! Clean residual min=-0.006597 max=0.009974 Jy/beam ! Clean residual mean=0.000438 rms=0.001943 Jy/beam ! Combined flux in latest and established models = 1.0387 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 180 components and 1.0387 Jy ! Inverting map ! Your choice of large map pixels excluded 0.338% of the data. ! The x-axis pixel size should ideally be below 0.1702 milli-arcsec ! Added new window around map position (2.2, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0130793 Jy ! Component: 100 - total flux cleaned = 0.0236723 Jy ! Component: 150 - total flux cleaned = 0.0324321 Jy ! Component: 200 - total flux cleaned = 0.0397487 Jy ! Total flux subtracted in 200 components = 0.0397487 Jy ! Clean residual min=-0.005214 max=0.005549 Jy/beam ! Clean residual mean=0.000247 rms=0.001237 Jy/beam ! Combined flux in latest and established models = 1.07845 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 211 components and 1.07845 Jy ! Inverting map ! Your choice of large map pixels excluded 0.338% of the data. ! The x-axis pixel size should ideally be below 0.1702 milli-arcsec ! Added new window around map position (-2, 1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00660062 Jy ! Component: 100 - total flux cleaned = 0.0120806 Jy ! Component: 150 - total flux cleaned = 0.0168182 Jy ! Component: 200 - total flux cleaned = 0.0209257 Jy ! Total flux subtracted in 200 components = 0.0209257 Jy ! Clean residual min=-0.004615 max=0.004202 Jy/beam ! Clean residual mean=0.000147 rms=0.001004 Jy/beam ! Combined flux in latest and established models = 1.09938 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 232 components and 1.09938 Jy ! Inverting map ! Your choice of large map pixels excluded 0.338% of the data. ! The x-axis pixel size should ideally be below 0.1702 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.338% of the data. ! The x-axis pixel size should ideally be below 0.1702 milli-arcsec ! Estimated beam: bmin=2.332 mas, bmaj=3.153 mas, bpa=-78.36 degrees ! Estimated noise=1.4682 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0072304 Jy ! Component: 100 - total flux cleaned = 0.0121171 Jy ! Component: 150 - total flux cleaned = 0.0156577 Jy ! Component: 200 - total flux cleaned = 0.0182891 Jy ! Total flux subtracted in 200 components = 0.0182891 Jy ! Clean residual min=-0.004009 max=0.004165 Jy/beam ! Clean residual mean=0.000160 rms=0.001108 Jy/beam ! Combined flux in latest and established models = 1.11767 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00199072 Jy ! Component: 100 - total flux cleaned = 0.00354196 Jy ! Component: 150 - total flux cleaned = 0.004766 Jy ! Component: 200 - total flux cleaned = 0.00570112 Jy ! Total flux subtracted in 200 components = 0.00570112 Jy ! Clean residual min=-0.003707 max=0.004324 Jy/beam ! Clean residual mean=0.000084 rms=0.001070 Jy/beam ! Combined flux in latest and established models = 1.12337 Jy ! Adding 78 model components to the UV plane model. ! The established model now contains 284 components and 1.12337 Jy ! Inverting map ! Your choice of large map pixels excluded 0.338% of the data. ! The x-axis pixel size should ideally be below 0.1702 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.338% of the data. ! The x-axis pixel size should ideally be below 0.1702 milli-arcsec ! Estimated beam: bmin=0.7301 mas, bmaj=1.256 mas, bpa=1.558 degrees ! Estimated noise=0.993725 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00119272 Jy ! Component: 100 - total flux cleaned = -0.00119871 Jy ! Component: 150 - total flux cleaned = -0.00113735 Jy ! Component: 200 - total flux cleaned = -0.00107998 Jy ! Total flux subtracted in 200 components = -0.00107998 Jy ! Clean residual min=-0.004311 max=0.003624 Jy/beam ! Clean residual mean=0.000036 rms=0.000898 Jy/beam ! Combined flux in latest and established models = 1.12229 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 298 components and 1.12229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070365Jy sigma=0.961306 ! Fit after self-cal, rms=0.070228Jy sigma=0.958763 wmodel J2025+3343_X_map.mod ! Writing 298 model components to file: J2025+3343_X_map.mod wobs J2025+3343_X_uvs.fits ! Writing UV FITS file: J2025+3343_X_uvs.fits wwins J2025+3343_X_map.win ! wwins: Wrote 11 windows to J2025+3343_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.338% of the data. ! The x-axis pixel size should ideally be below 0.1702 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000869315 Jy ! Component: 100 - total flux cleaned = -0.00080085 Jy ! Component: 150 - total flux cleaned = -0.000545386 Jy ! Component: 200 - total flux cleaned = -0.000360616 Jy ! Component: 250 - total flux cleaned = -0.000242337 Jy ! Component: 300 - total flux cleaned = -6.59675e-05 Jy ! Component: 350 - total flux cleaned = 0.000279949 Jy ! Component: 400 - total flux cleaned = 0.000562628 Jy ! Component: 450 - total flux cleaned = 0.000730725 Jy ! Component: 500 - total flux cleaned = 0.0010594 Jy ! Component: 550 - total flux cleaned = 0.00106058 Jy ! Component: 600 - total flux cleaned = 0.00122125 Jy ! Component: 650 - total flux cleaned = 0.00122203 Jy ! Component: 700 - total flux cleaned = 0.00143022 Jy ! Component: 750 - total flux cleaned = 0.00127652 Jy ! Component: 800 - total flux cleaned = 0.00142673 Jy ! Component: 850 - total flux cleaned = 0.0012781 Jy ! Component: 900 - total flux cleaned = 0.00137661 Jy ! Component: 950 - total flux cleaned = 0.00142511 Jy ! Component: 1000 - total flux cleaned = 0.0015213 Jy ! Component: 1050 - total flux cleaned = 0.00171068 Jy ! Component: 1100 - total flux cleaned = 0.00170991 Jy ! Component: 1150 - total flux cleaned = 0.00194196 Jy ! Component: 1200 - total flux cleaned = 0.00203388 Jy ! Component: 1250 - total flux cleaned = 0.00207944 Jy ! Component: 1300 - total flux cleaned = 0.00235064 Jy ! Component: 1350 - total flux cleaned = 0.00239512 Jy ! Component: 1400 - total flux cleaned = 0.00252893 Jy ! Component: 1450 - total flux cleaned = 0.00279283 Jy ! Component: 1500 - total flux cleaned = 0.00309795 Jy ! Component: 1550 - total flux cleaned = 0.00309796 Jy ! Component: 1600 - total flux cleaned = 0.00326981 Jy ! Component: 1650 - total flux cleaned = 0.0033972 Jy ! Component: 1700 - total flux cleaned = 0.00364935 Jy ! Component: 1750 - total flux cleaned = 0.00373215 Jy ! Component: 1800 - total flux cleaned = 0.00373226 Jy ! Component: 1850 - total flux cleaned = 0.00393724 Jy ! Component: 1900 - total flux cleaned = 0.00389657 Jy ! Component: 1950 - total flux cleaned = 0.00389631 Jy ! Component: 2000 - total flux cleaned = 0.00405691 Jy ! Component: 2050 - total flux cleaned = 0.00405674 Jy ! Component: 2100 - total flux cleaned = 0.00425448 Jy ! Component: 2150 - total flux cleaned = 0.00429302 Jy ! Component: 2200 - total flux cleaned = 0.00437083 Jy ! Component: 2250 - total flux cleaned = 0.00444833 Jy ! Component: 2300 - total flux cleaned = 0.00444829 Jy ! Component: 2350 - total flux cleaned = 0.00444901 Jy ! Component: 2400 - total flux cleaned = 0.00456277 Jy ! Component: 2450 - total flux cleaned = 0.00467547 Jy ! Component: 2500 - total flux cleaned = 0.00475026 Jy ! Component: 2550 - total flux cleaned = 0.00460171 Jy ! Component: 2600 - total flux cleaned = 0.00467545 Jy ! Component: 2650 - total flux cleaned = 0.00478513 Jy ! Component: 2700 - total flux cleaned = 0.00478509 Jy ! Component: 2750 - total flux cleaned = 0.00496607 Jy ! Component: 2800 - total flux cleaned = 0.00485827 Jy ! Component: 2850 - total flux cleaned = 0.00482263 Jy ! Component: 2900 - total flux cleaned = 0.00489387 Jy ! Component: 2950 - total flux cleaned = 0.00503526 Jy ! Component: 3000 - total flux cleaned = 0.00492978 Jy ! Component: 3050 - total flux cleaned = 0.00503419 Jy ! Component: 3100 - total flux cleaned = 0.00499949 Jy ! Component: 3150 - total flux cleaned = 0.00499951 Jy ! Component: 3200 - total flux cleaned = 0.00493062 Jy ! Component: 3250 - total flux cleaned = 0.00503308 Jy ! Component: 3300 - total flux cleaned = 0.00496544 Jy ! Component: 3350 - total flux cleaned = 0.00493224 Jy ! Component: 3400 - total flux cleaned = 0.00496572 Jy ! Component: 3450 - total flux cleaned = 0.00493244 Jy ! Component: 3500 - total flux cleaned = 0.00493263 Jy ! Component: 3550 - total flux cleaned = 0.00486639 Jy ! Component: 3600 - total flux cleaned = 0.00470193 Jy ! Component: 3650 - total flux cleaned = 0.00486539 Jy ! Component: 3700 - total flux cleaned = 0.00473521 Jy ! Component: 3750 - total flux cleaned = 0.00483224 Jy ! Component: 3800 - total flux cleaned = 0.00467123 Jy ! Component: 3850 - total flux cleaned = 0.00463948 Jy ! Component: 3900 - total flux cleaned = 0.00457564 Jy ! Component: 3950 - total flux cleaned = 0.00467103 Jy ! Component: 4000 - total flux cleaned = 0.00451323 Jy ! Component: 4050 - total flux cleaned = 0.00438802 Jy ! Total flux subtracted in 4096 components = 0.00448191 Jy ! Clean residual min=-0.001681 max=0.001744 Jy/beam ! Clean residual mean=0.000012 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 1.12677 Jy keep ! Adding 334 model components to the UV plane model. ! The established model now contains 632 components and 1.12677 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv117_uvs/J2025+3343_X_map.fits ! Inverting map ! Your choice of large map pixels excluded 0.338% of the data. ! The x-axis pixel size should ideally be below 0.1702 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7301 x 1.256 at 1.558 degrees (North through East) ! Clean map min=-0.0034632 max=0.2881 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv117_uvs/J2025+3343_X_map.fits wmodel /scr/pima/rv117_uvs/J2025+3343_X_map.mod ! Writing 632 model components to file: /scr/pima/rv117_uvs/J2025+3343_X_map.mod wobs /scr/pima/rv117_uvs/J2025+3343_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv117_uvs/J2025+3343_X_uvs.fits wwins /scr/pima/rv117_uvs/J2025+3343_X_map.win ! wwins: Wrote 12 windows to /scr/pima/rv117_uvs/J2025+3343_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.288102 invert ! Inverting map ! Your choice of large map pixels excluded 0.338% of the data. ! The x-axis pixel size should ideally be below 0.1702 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000512536 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.533701 0.533701 1.0674 2.1348 4.26961 8.53922 17.0784 34.1569 68.3138 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.288 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 562.112 quit ! Quitting program ! Log file /scr/pima/rv117_uvs/J2025+3343_X_dfm.log closed on Sat Dec 9 23:46:12 2017