! Started logfile: /scr/pima/rv117_uvs/J1800+7828_X_dfm.log on Sat Dec  9 23:45:30 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.36575
obs     /scr/pima/rv117_uvs/J1800+7828_X_uva.fits
! Reading UV FITS file: /scr/pima/rv117_uvs/J1800+7828_X_uva.fits
! AN table 1: 8 integrations on 55 of 55 possible baselines.
! AN table 2: 28 integrations on 55 of 55 possible baselines.
! Apparent sampling: 0.60101 visibilities/baseline/integration-bin.
! Found source: J1800+7828
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.36575e+09        8e+06          1        8e+06
!  02        2  8.44575e+09        8e+06          1        8e+06
!  03        3  8.80575e+09        8e+06          1        8e+06
!  04        4  8.92575e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 74 lines of history.
! 
! Reading 4760 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1800+7828_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 34 telescope corrections were flagged in sub-array 1.
!  A total of 64 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 34 telescope corrections were flagged in sub-array 1.
!  A total of 64 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 34 telescope corrections were flagged in sub-array 1.
!  A total of 64 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 34 telescope corrections were flagged in sub-array 1.
!  A total of 64 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=2.381895Jy  sigma=26.071945
! Fit after  self-cal, rms=1.175909Jy  sigma=13.077487
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.336% of the data.
!  The x-axis pixel size should ideally be below 0.1718 milli-arcsec
! Estimated beam: bmin=0.6741 mas, bmaj=0.8356 mas, bpa=-68.29 degrees
! Estimated noise=1.40271 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.54965 Jy
! Component: 100  -  total flux cleaned = 1.90458 Jy
! Total flux subtracted in 100 components = 1.90458 Jy
! Clean residual min=-0.029824 max=0.132026 Jy/beam
! Clean residual mean=0.000187 rms=0.007351 Jy/beam
! Combined flux in latest and established models = 1.90458 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 1.90458 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.367996Jy  sigma=4.132039
! Fit after  self-cal, rms=0.367521Jy  sigma=4.128534
! Inverting map 
! Your choice of large map pixels excluded 0.336% of the data.
!  The x-axis pixel size should ideally be below 0.1718 milli-arcsec
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.139148 Jy
! Component: 100  -  total flux cleaned = 0.215989 Jy
! Total flux subtracted in 100 components = 0.215989 Jy
! Clean residual min=-0.025130 max=0.102510 Jy/beam
! Clean residual mean=0.000116 rms=0.004977 Jy/beam
! Combined flux in latest and established models = 2.12057 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 13 components and 2.12057 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.242155Jy  sigma=2.711832
! Fit after  self-cal, rms=0.241626Jy  sigma=2.708253
! Inverting map 
! Your choice of large map pixels excluded 0.336% of the data.
!  The x-axis pixel size should ideally be below 0.1718 milli-arcsec
! Added new window around map position (-1.4, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0895554 Jy
! Component: 100  -  total flux cleaned = 0.132107 Jy
! Total flux subtracted in 100 components = 0.132107 Jy
! Clean residual min=-0.022686 max=0.039418 Jy/beam
! Clean residual mean=0.000072 rms=0.003615 Jy/beam
! Combined flux in latest and established models = 2.25267 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 26 components and 2.25267 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.188937Jy  sigma=2.105736
! Fit after  self-cal, rms=0.180172Jy  sigma=2.016100
! Inverting map 
! Your choice of large map pixels excluded 0.336% of the data.
!  The x-axis pixel size should ideally be below 0.1718 milli-arcsec
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0411624 Jy
! Component: 100  -  total flux cleaned = 0.0669754 Jy
! Total flux subtracted in 100 components = 0.0669754 Jy
! Clean residual min=-0.016117 max=0.018968 Jy/beam
! Clean residual mean=0.000050 rms=0.002939 Jy/beam
! Combined flux in latest and established models = 2.31965 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 31 components and 2.31965 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.160437Jy  sigma=1.786051
! Fit after  self-cal, rms=0.158359Jy  sigma=1.765451
! Inverting map 
! Your choice of large map pixels excluded 0.336% of the data.
!  The x-axis pixel size should ideally be below 0.1718 milli-arcsec
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0235088 Jy
! Component: 100  -  total flux cleaned = 0.0393612 Jy
! Total flux subtracted in 100 components = 0.0393612 Jy
! Clean residual min=-0.013742 max=0.016865 Jy/beam
! Clean residual mean=0.000037 rms=0.002706 Jy/beam
! Combined flux in latest and established models = 2.35901 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 35 components and 2.35901 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.149459Jy  sigma=1.658822
! Fit after  self-cal, rms=0.148788Jy  sigma=1.652462
! Inverting map 
! Your choice of large map pixels excluded 0.336% of the data.
!  The x-axis pixel size should ideally be below 0.1718 milli-arcsec
! Added new window around map position (-4.4, -0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0169146 Jy
! Component: 100  -  total flux cleaned = 0.0285183 Jy
! Total flux subtracted in 100 components = 0.0285183 Jy
! Clean residual min=-0.013392 max=0.013641 Jy/beam
! Clean residual mean=0.000030 rms=0.002588 Jy/beam
! Combined flux in latest and established models = 2.38753 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 40 components and 2.38753 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.144144Jy  sigma=1.601307
! Fit after  self-cal, rms=0.143908Jy  sigma=1.599366
! Inverting map 
! Your choice of large map pixels excluded 0.336% of the data.
!  The x-axis pixel size should ideally be below 0.1718 milli-arcsec
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.336% of the data.
!  The x-axis pixel size should ideally be below 0.1718 milli-arcsec
! Estimated beam: bmin=0.7854 mas, bmaj=1.166 mas, bpa=-88.02 degrees
! Estimated noise=1.00522 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-10, -5.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0398472 Jy
! Component: 100  -  total flux cleaned = 0.0623631 Jy
! Component: 150  -  total flux cleaned = 0.0777971 Jy
! Component: 200  -  total flux cleaned = 0.0895164 Jy
! Total flux subtracted in 200 components = 0.0895164 Jy
! Clean residual min=-0.020019 max=0.022790 Jy/beam
! Clean residual mean=-0.000027 rms=0.004364 Jy/beam
! Combined flux in latest and established models = 2.47704 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 77 components and 2.47704 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.131997Jy  sigma=1.456071
! Fit after  self-cal, rms=0.131329Jy  sigma=1.448778
! Inverting map 
! Your choice of large map pixels excluded 0.336% of the data.
!  The x-axis pixel size should ideally be below 0.1718 milli-arcsec
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7854 x 1.166 at -88.02 degrees (North through East)
! Clean map  min=-0.017812  max=2.0442 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     HN        1.00     KP        1.03     LA        1.01     
!   MK        0.99     NL        1.00     NY        1.02     ON        0.97     
!   OV        1.01     PT        1.02     WZ        1.02     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        1.02     HN        0.99     KP        0.99     
!   LA        0.95     MK        0.99     NL        1.00     NY        1.02     
!   OV        1.01     PT        1.01     SC        1.02     
! 
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     HN        1.00     KP        1.02     LA        1.01     
!   MK        0.99     NL        1.01     NY        1.00     ON        0.98     
!   OV        1.00     PT        1.03     WZ        1.02     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        1.01     HN        1.00     KP        1.00     
!   LA        0.96     MK        1.00     NL        0.99     NY        1.01     
!   OV        1.01     PT        1.00     SC        1.02     
! 
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     HN        0.99     KP        1.02     LA        1.01     
!   MK        1.01     NL        1.00     NY        1.00     ON        0.97     
!   OV        1.01     PT        1.01     WZ        1.03     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        1.02     HN        1.00     KP        1.00     
!   LA        0.96     MK        0.99     NL        0.99     NY        1.00     
!   OV        1.01     PT        1.01     SC        1.04     
! 
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     HN        0.98     KP        1.03     LA        1.03     
!   MK        0.99     NL        1.00     NY        1.00     ON        0.96     
!   OV        1.01     PT        1.02     WZ        1.02     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        1.02     HN        0.99     KP        0.99     
!   LA        0.95     MK        0.99     NL        0.99     NY        1.00     
!   OV        1.02     PT        1.01     SC        1.04     
! 
! 
! Fit before self-cal, rms=0.131329Jy  sigma=1.448778
! Fit after  self-cal, rms=0.119216Jy  sigma=1.301714
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.341% of the data.
!  The x-axis pixel size should ideally be below 0.1718 milli-arcsec
! Estimated beam: bmin=0.7837 mas, bmaj=1.172 mas, bpa=-88.06 degrees
! Estimated noise=1.00919 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00565109 Jy
! Component: 100  -  total flux cleaned = 0.00637259 Jy
! Component: 150  -  total flux cleaned = 0.00678217 Jy
! Component: 200  -  total flux cleaned = 0.00661316 Jy
! Total flux subtracted in 200 components = 0.00661316 Jy
! Clean residual min=-0.010494 max=0.009705 Jy/beam
! Clean residual mean=-0.000031 rms=0.002258 Jy/beam
! Combined flux in latest and established models = 2.48366 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 89 components and 2.48366 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.118206Jy  sigma=1.291710
! Fit after  self-cal, rms=0.118056Jy  sigma=1.290830
! Inverting map 
! Your choice of large map pixels excluded 0.341% of the data.
!  The x-axis pixel size should ideally be below 0.1718 milli-arcsec
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.118056Jy  sigma=1.290830
! Fit after  self-cal, rms=0.104053Jy  sigma=1.125437
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.341% of the data.
!  The x-axis pixel size should ideally be below 0.1718 milli-arcsec
! Estimated beam: bmin=0.7835 mas, bmaj=1.172 mas, bpa=-87.98 degrees
! Estimated noise=1.00999 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00495984 Jy
! Component: 100  -  total flux cleaned = -0.00657377 Jy
! Component: 150  -  total flux cleaned = -0.00674797 Jy
! Component: 200  -  total flux cleaned = -0.00735338 Jy
! Total flux subtracted in 200 components = -0.00735338 Jy
! Clean residual min=-0.006235 max=0.007836 Jy/beam
! Clean residual mean=0.000001 rms=0.001464 Jy/beam
! Combined flux in latest and established models = 2.4763 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 96 components and 2.4763 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103079Jy  sigma=1.116647
! Fit after  self-cal, rms=0.102953Jy  sigma=1.115821
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.341% of the data.
!  The x-axis pixel size should ideally be below 0.1718 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-10.4, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00767631 Jy
! Component: 100  -  total flux cleaned = 0.0101677 Jy
! Component: 150  -  total flux cleaned = 0.0109379 Jy
! Component: 200  -  total flux cleaned = 0.0116263 Jy
! Total flux subtracted in 200 components = 0.0116263 Jy
! Clean residual min=-0.005501 max=0.006292 Jy/beam
! Clean residual mean=-0.000002 rms=0.001314 Jy/beam
! Combined flux in latest and established models = 2.48793 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 113 components and 2.48793 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102145Jy  sigma=1.109182
! Fit after  self-cal, rms=0.102034Jy  sigma=1.108446
! Inverting map 
! Your choice of large map pixels excluded 0.341% of the data.
!  The x-axis pixel size should ideally be below 0.1718 milli-arcsec
! Added new window around map position (-6.2, 0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00667188 Jy
! Component: 100  -  total flux cleaned = 0.00897363 Jy
! Component: 150  -  total flux cleaned = 0.00955413 Jy
! Component: 200  -  total flux cleaned = 0.00993851 Jy
! Total flux subtracted in 200 components = 0.00993851 Jy
! Clean residual min=-0.004948 max=0.005302 Jy/beam
! Clean residual mean=-0.000004 rms=0.001225 Jy/beam
! Combined flux in latest and established models = 2.49787 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 135 components and 2.49787 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101348Jy  sigma=1.103516
! Fit after  self-cal, rms=0.101276Jy  sigma=1.102974
! Inverting map 
! Your choice of large map pixels excluded 0.341% of the data.
!  The x-axis pixel size should ideally be below 0.1718 milli-arcsec
! Added new window around map position (-11.6, -2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00479836 Jy
! Component: 100  -  total flux cleaned = 0.00636884 Jy
! Component: 150  -  total flux cleaned = 0.00739614 Jy
! Component: 200  -  total flux cleaned = 0.00810248 Jy
! Total flux subtracted in 200 components = 0.00810248 Jy
! Clean residual min=-0.004688 max=0.004996 Jy/beam
! Clean residual mean=-0.000004 rms=0.001156 Jy/beam
! Combined flux in latest and established models = 2.50597 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 145 components and 2.50597 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100808Jy  sigma=1.099492
! Fit after  self-cal, rms=0.100783Jy  sigma=1.099202
! Inverting map 
! Your choice of large map pixels excluded 0.341% of the data.
!  The x-axis pixel size should ideally be below 0.1718 milli-arcsec
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100783Jy  sigma=1.099202
! Fit after  self-cal, rms=0.100473Jy  sigma=1.096254
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.341% of the data.
!  The x-axis pixel size should ideally be below 0.1718 milli-arcsec
! Estimated beam: bmin=0.7834 mas, bmaj=1.174 mas, bpa=-87.96 degrees
! Estimated noise=1.00981 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00151654 Jy
! Component: 100  -  total flux cleaned = -0.00138885 Jy
! Component: 150  -  total flux cleaned = -0.000882199 Jy
! Component: 200  -  total flux cleaned = -0.000411952 Jy
! Total flux subtracted in 200 components = -0.000411952 Jy
! Clean residual min=-0.004565 max=0.004658 Jy/beam
! Clean residual mean=0.000006 rms=0.001080 Jy/beam
! Combined flux in latest and established models = 2.50556 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 146 components and 2.50556 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100090Jy  sigma=1.092877
! Fit after  self-cal, rms=0.100060Jy  sigma=1.092720
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.341% of the data.
!  The x-axis pixel size should ideally be below 0.1718 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (46.2, 8.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00116965 Jy
! Component: 100  -  total flux cleaned = 0.00116246 Jy
! Component: 150  -  total flux cleaned = 0.00162888 Jy
! Component: 200  -  total flux cleaned = 0.00238918 Jy
! Total flux subtracted in 200 components = 0.00238918 Jy
! Clean residual min=-0.004309 max=0.004515 Jy/beam
! Clean residual mean=0.000005 rms=0.001050 Jy/beam
! Combined flux in latest and established models = 2.50795 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 157 components and 2.50795 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099727Jy  sigma=1.089177
! Fit after  self-cal, rms=0.099698Jy  sigma=1.088986
! Inverting map 
! Your choice of large map pixels excluded 0.341% of the data.
!  The x-axis pixel size should ideally be below 0.1718 milli-arcsec
! Added new window around map position (-3, 1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00430544 Jy
! Component: 100  -  total flux cleaned = 0.00546885 Jy
! Component: 150  -  total flux cleaned = 0.00589596 Jy
! Component: 200  -  total flux cleaned = 0.00639689 Jy
! Total flux subtracted in 200 components = 0.00639689 Jy
! Clean residual min=-0.004101 max=0.004169 Jy/beam
! Clean residual mean=0.000003 rms=0.001014 Jy/beam
! Combined flux in latest and established models = 2.51435 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 172 components and 2.51435 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099391Jy  sigma=1.086182
! Fit after  self-cal, rms=0.099365Jy  sigma=1.086015
! Inverting map 
! Your choice of large map pixels excluded 0.341% of the data.
!  The x-axis pixel size should ideally be below 0.1718 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099365Jy  sigma=1.086015
! Fit after  self-cal, rms=0.099289Jy  sigma=1.085358
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.341% of the data.
!  The x-axis pixel size should ideally be below 0.1718 milli-arcsec
! Estimated beam: bmin=2.121 mas, bmaj=2.834 mas, bpa=72.78 degrees
! Estimated noise=1.44688 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00159329 Jy
! Component: 100  -  total flux cleaned = 0.0033961 Jy
! Component: 150  -  total flux cleaned = 0.00501824 Jy
! Component: 200  -  total flux cleaned = 0.00602421 Jy
! Total flux subtracted in 200 components = 0.00602421 Jy
! Clean residual min=-0.005200 max=0.005438 Jy/beam
! Clean residual mean=0.000015 rms=0.001482 Jy/beam
! Combined flux in latest and established models = 2.52037 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 187 components and 2.52037 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099141Jy  sigma=1.084237
! Fit after  self-cal, rms=0.099111Jy  sigma=1.084000
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.341% of the data.
!  The x-axis pixel size should ideally be below 0.1718 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00109955 Jy
! Component: 100  -  total flux cleaned = 0.00222349 Jy
! Component: 150  -  total flux cleaned = 0.00289966 Jy
! Component: 200  -  total flux cleaned = 0.00344757 Jy
! Total flux subtracted in 200 components = 0.00344757 Jy
! Clean residual min=-0.005020 max=0.005161 Jy/beam
! Clean residual mean=0.000012 rms=0.001429 Jy/beam
! Combined flux in latest and established models = 2.52382 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 194 components and 2.52382 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099061Jy  sigma=1.083508
! Fit after  self-cal, rms=0.099046Jy  sigma=1.083440
! Inverting map 
! Your choice of large map pixels excluded 0.341% of the data.
!  The x-axis pixel size should ideally be below 0.1718 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Your choice of large map pixels excluded 0.341% of the data.
!  The x-axis pixel size should ideally be below 0.1718 milli-arcsec
! Estimated beam: bmin=0.7833 mas, bmaj=1.174 mas, bpa=-87.95 degrees
! Estimated noise=1.00976 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7833 x 1.174 at -87.95 degrees (North through East)
! Clean map  min=-0.0065512  max=2.0408 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099046Jy  sigma=1.083440
! Fit after  self-cal, rms=0.074012Jy  sigma=0.673982
! Inverting map and beam 
! Your choice of large map pixels excluded 0.341% of the data.
!  The x-axis pixel size should ideally be below 0.1718 milli-arcsec
! Estimated beam: bmin=0.7832 mas, bmaj=1.174 mas, bpa=-87.97 degrees
! Estimated noise=1.00947 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00176126 Jy
! Component: 100  -  total flux cleaned = -0.00209598 Jy
! Component: 150  -  total flux cleaned = -0.00259147 Jy
! Component: 200  -  total flux cleaned = -0.00286722 Jy
! Total flux subtracted in 200 components = -0.00286722 Jy
! Clean residual min=-0.003528 max=0.003923 Jy/beam
! Clean residual mean=0.000006 rms=0.000858 Jy/beam
! Combined flux in latest and established models = 2.52095 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 205 components and 2.52095 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073742Jy  sigma=0.670626
! Fit after  self-cal, rms=0.073714Jy  sigma=0.670496
! Inverting map 
! Your choice of large map pixels excluded 0.341% of the data.
!  The x-axis pixel size should ideally be below 0.1718 milli-arcsec
! Added new window around map position (3.2, 0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00175692 Jy
! Component: 100  -  total flux cleaned = 0.00204051 Jy
! Component: 150  -  total flux cleaned = 0.00238816 Jy
! Component: 200  -  total flux cleaned = 0.00271595 Jy
! Total flux subtracted in 200 components = 0.00271595 Jy
! Clean residual min=-0.003345 max=0.003471 Jy/beam
! Clean residual mean=0.000005 rms=0.000829 Jy/beam
! Combined flux in latest and established models = 2.52367 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 216 components and 2.52367 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073442Jy  sigma=0.667576
! Fit after  self-cal, rms=0.073420Jy  sigma=0.667458
! Inverting map 
! Your choice of large map pixels excluded 0.341% of the data.
!  The x-axis pixel size should ideally be below 0.1718 milli-arcsec
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073420Jy  sigma=0.667458
! Fit after  self-cal, rms=0.073341Jy  sigma=0.666779
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.341% of the data.
!  The x-axis pixel size should ideally be below 0.1718 milli-arcsec
! Estimated beam: bmin=0.6681 mas, bmaj=0.8363 mas, bpa=-68.81 degrees
! Estimated noise=1.42638 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.55897 Jy
! Component: 100  -  total flux cleaned = 1.92314 Jy
! Component: 150  -  total flux cleaned = 2.08993 Jy
! Component: 200  -  total flux cleaned = 2.1854 Jy
! Total flux subtracted in 200 components = 2.1854 Jy
! Clean residual min=-0.014409 max=0.049709 Jy/beam
! Clean residual mean=0.000103 rms=0.003278 Jy/beam
! Combined flux in latest and established models = 2.1854 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 2.1854 Jy
! Inverting map and beam 
! Your choice of large map pixels excluded 0.341% of the data.
!  The x-axis pixel size should ideally be below 0.1718 milli-arcsec
! Estimated beam: bmin=0.7831 mas, bmaj=1.175 mas, bpa=-87.97 degrees
! Estimated noise=1.00934 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.103236 Jy
! Component: 100  -  total flux cleaned = 0.160423 Jy
! Component: 150  -  total flux cleaned = 0.195324 Jy
! Component: 200  -  total flux cleaned = 0.217664 Jy
! Total flux subtracted in 200 components = 0.217664 Jy
! Clean residual min=-0.007985 max=0.014221 Jy/beam
! Clean residual mean=0.000024 rms=0.002352 Jy/beam
! Combined flux in latest and established models = 2.40307 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 51 components and 2.40307 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.341% of the data.
!  The x-axis pixel size should ideally be below 0.1718 milli-arcsec
! Added new window around map position (-2.6, -0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0168928 Jy
! Component: 100  -  total flux cleaned = 0.0303917 Jy
! Component: 150  -  total flux cleaned = 0.041889 Jy
! Component: 200  -  total flux cleaned = 0.0518434 Jy
! Total flux subtracted in 200 components = 0.0518434 Jy
! Clean residual min=-0.005876 max=0.007097 Jy/beam
! Clean residual mean=0.000016 rms=0.001506 Jy/beam
! Combined flux in latest and established models = 2.45491 Jy
! Adding 54 model components to the UV plane model.
! The established model now contains 92 components and 2.45491 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.341% of the data.
!  The x-axis pixel size should ideally be below 0.1718 milli-arcsec
! Added new window around map position (10.2, 6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00877699 Jy
! Component: 100  -  total flux cleaned = 0.0163529 Jy
! Component: 150  -  total flux cleaned = 0.0229911 Jy
! Component: 200  -  total flux cleaned = 0.0277061 Jy
! Total flux subtracted in 200 components = 0.0277061 Jy
! Clean residual min=-0.004807 max=0.005228 Jy/beam
! Clean residual mean=0.000013 rms=0.001159 Jy/beam
! Combined flux in latest and established models = 2.48262 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 117 components and 2.48262 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.341% of the data.
!  The x-axis pixel size should ideally be below 0.1718 milli-arcsec
! Added new window around map position (-15.8, -4.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00508264 Jy
! Component: 100  -  total flux cleaned = 0.00874957 Jy
! Component: 150  -  total flux cleaned = 0.0117308 Jy
! Component: 200  -  total flux cleaned = 0.0146425 Jy
! Total flux subtracted in 200 components = 0.0146425 Jy
! Clean residual min=-0.004210 max=0.004073 Jy/beam
! Clean residual mean=0.000011 rms=0.001000 Jy/beam
! Combined flux in latest and established models = 2.49726 Jy
! Adding 62 model components to the UV plane model.
! The established model now contains 139 components and 2.49726 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.341% of the data.
!  The x-axis pixel size should ideally be below 0.1718 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.341% of the data.
!  The x-axis pixel size should ideally be below 0.1718 milli-arcsec
! Estimated beam: bmin=2.121 mas, bmaj=2.834 mas, bpa=72.79 degrees
! Estimated noise=1.44587 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00701995 Jy
! Component: 100  -  total flux cleaned = 0.0119055 Jy
! Component: 150  -  total flux cleaned = 0.0158417 Jy
! Component: 200  -  total flux cleaned = 0.0191901 Jy
! Total flux subtracted in 200 components = 0.0191901 Jy
! Clean residual min=-0.004797 max=0.004834 Jy/beam
! Clean residual mean=0.000025 rms=0.001467 Jy/beam
! Combined flux in latest and established models = 2.51645 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00289697 Jy
! Component: 100  -  total flux cleaned = 0.00542635 Jy
! Component: 150  -  total flux cleaned = 0.00730071 Jy
! Component: 200  -  total flux cleaned = 0.00897546 Jy
! Total flux subtracted in 200 components = 0.00897546 Jy
! Clean residual min=-0.004510 max=0.004661 Jy/beam
! Clean residual mean=0.000021 rms=0.001361 Jy/beam
! Combined flux in latest and established models = 2.52543 Jy
! Adding 80 model components to the UV plane model.
! The established model now contains 215 components and 2.52543 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.341% of the data.
!  The x-axis pixel size should ideally be below 0.1718 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Your choice of large map pixels excluded 0.341% of the data.
!  The x-axis pixel size should ideally be below 0.1718 milli-arcsec
! Estimated beam: bmin=0.7831 mas, bmaj=1.175 mas, bpa=-87.97 degrees
! Estimated noise=1.00934 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00182679 Jy
! Component: 100  -  total flux cleaned = -0.00157893 Jy
! Component: 150  -  total flux cleaned = -0.00134709 Jy
! Component: 200  -  total flux cleaned = -0.00101462 Jy
! Total flux subtracted in 200 components = -0.00101462 Jy
! Clean residual min=-0.003635 max=0.003645 Jy/beam
! Clean residual mean=0.000008 rms=0.000866 Jy/beam
! Combined flux in latest and established models = 2.52441 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 228 components and 2.52441 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074217Jy  sigma=0.678361
! Fit after  self-cal, rms=0.073962Jy  sigma=0.675044
wmodel J1800+7828_X_map.mod
! Writing 228 model components to file: J1800+7828_X_map.mod
wobs   J1800+7828_X_uvs.fits
! Writing UV FITS file: J1800+7828_X_uvs.fits
wwins  J1800+7828_X_map.win
! wwins: Wrote 13 windows to J1800+7828_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! Your choice of large map pixels excluded 0.341% of the data.
!  The x-axis pixel size should ideally be below 0.1718 milli-arcsec
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000947919 Jy
! Component: 100  -  total flux cleaned = -0.000951026 Jy
! Component: 150  -  total flux cleaned = -0.000590905 Jy
! Component: 200  -  total flux cleaned = -0.000416229 Jy
! Component: 250  -  total flux cleaned = -1.91518e-05 Jy
! Component: 300  -  total flux cleaned = 0.00036983 Jy
! Component: 350  -  total flux cleaned = 0.00086114 Jy
! Component: 400  -  total flux cleaned = 0.00128927 Jy
! Component: 450  -  total flux cleaned = 0.00165701 Jy
! Component: 500  -  total flux cleaned = 0.00196661 Jy
! Component: 550  -  total flux cleaned = 0.00221951 Jy
! Component: 600  -  total flux cleaned = 0.00226902 Jy
! Component: 650  -  total flux cleaned = 0.00261407 Jy
! Component: 700  -  total flux cleaned = 0.00275883 Jy
! Component: 750  -  total flux cleaned = 0.00271108 Jy
! Component: 800  -  total flux cleaned = 0.00280617 Jy
! Component: 850  -  total flux cleaned = 0.00285269 Jy
! Component: 900  -  total flux cleaned = 0.00285253 Jy
! Component: 950  -  total flux cleaned = 0.00299053 Jy
! Component: 1000  -  total flux cleaned = 0.00317242 Jy
! Component: 1050  -  total flux cleaned = 0.00335239 Jy
! Component: 1100  -  total flux cleaned = 0.0034424 Jy
! Component: 1150  -  total flux cleaned = 0.00366397 Jy
! Component: 1200  -  total flux cleaned = 0.00384001 Jy
! Component: 1250  -  total flux cleaned = 0.00388405 Jy
! Component: 1300  -  total flux cleaned = 0.00405728 Jy
! Component: 1350  -  total flux cleaned = 0.00431475 Jy
! Component: 1400  -  total flux cleaned = 0.00439984 Jy
! Component: 1450  -  total flux cleaned = 0.0045688 Jy
! Component: 1500  -  total flux cleaned = 0.00456874 Jy
! Component: 1550  -  total flux cleaned = 0.00473584 Jy
! Component: 1600  -  total flux cleaned = 0.00494336 Jy
! Component: 1650  -  total flux cleaned = 0.00514959 Jy
! Component: 1700  -  total flux cleaned = 0.00519077 Jy
! Component: 1750  -  total flux cleaned = 0.00547552 Jy
! Component: 1800  -  total flux cleaned = 0.00547563 Jy
! Component: 1850  -  total flux cleaned = 0.00555603 Jy
! Component: 1900  -  total flux cleaned = 0.00583568 Jy
! Component: 1950  -  total flux cleaned = 0.00595517 Jy
! Component: 2000  -  total flux cleaned = 0.00603417 Jy
! Component: 2050  -  total flux cleaned = 0.0062303 Jy
! Component: 2100  -  total flux cleaned = 0.00623057 Jy
! Component: 2150  -  total flux cleaned = 0.0063473 Jy
! Component: 2200  -  total flux cleaned = 0.00627028 Jy
! Component: 2250  -  total flux cleaned = 0.00634695 Jy
! Component: 2300  -  total flux cleaned = 0.00653778 Jy
! Component: 2350  -  total flux cleaned = 0.00653734 Jy
! Component: 2400  -  total flux cleaned = 0.00638609 Jy
! Component: 2450  -  total flux cleaned = 0.00638623 Jy
! Component: 2500  -  total flux cleaned = 0.00664834 Jy
! Component: 2550  -  total flux cleaned = 0.00679698 Jy
! Component: 2600  -  total flux cleaned = 0.00664873 Jy
! Component: 2650  -  total flux cleaned = 0.00672255 Jy
! Component: 2700  -  total flux cleaned = 0.00683281 Jy
! Component: 2750  -  total flux cleaned = 0.0069789 Jy
! Component: 2800  -  total flux cleaned = 0.00694269 Jy
! Component: 2850  -  total flux cleaned = 0.00694278 Jy
! Component: 2900  -  total flux cleaned = 0.00701472 Jy
! Component: 2950  -  total flux cleaned = 0.00705042 Jy
! Component: 3000  -  total flux cleaned = 0.00708613 Jy
! Component: 3050  -  total flux cleaned = 0.00715731 Jy
! Component: 3100  -  total flux cleaned = 0.00726365 Jy
! Component: 3150  -  total flux cleaned = 0.00726385 Jy
! Component: 3200  -  total flux cleaned = 0.0073694 Jy
! Component: 3250  -  total flux cleaned = 0.00740472 Jy
! Component: 3300  -  total flux cleaned = 0.00747449 Jy
! Component: 3350  -  total flux cleaned = 0.00730063 Jy
! Component: 3400  -  total flux cleaned = 0.00743926 Jy
! Component: 3450  -  total flux cleaned = 0.00743918 Jy
! Component: 3500  -  total flux cleaned = 0.00747358 Jy
! Component: 3550  -  total flux cleaned = 0.00757634 Jy
! Component: 3600  -  total flux cleaned = 0.00767886 Jy
! Component: 3650  -  total flux cleaned = 0.00761059 Jy
! Component: 3700  -  total flux cleaned = 0.00767847 Jy
! Component: 3750  -  total flux cleaned = 0.00774616 Jy
! Component: 3800  -  total flux cleaned = 0.00771262 Jy
! Component: 3850  -  total flux cleaned = 0.00767918 Jy
! Component: 3900  -  total flux cleaned = 0.00774604 Jy
! Component: 3950  -  total flux cleaned = 0.00774601 Jy
! Component: 4000  -  total flux cleaned = 0.00781245 Jy
! Component: 4050  -  total flux cleaned = 0.00781235 Jy
! Total flux subtracted in 4096 components = 0.00777945 Jy
! Clean residual min=-0.002056 max=0.001726 Jy/beam
! Clean residual mean=0.000005 rms=0.000554 Jy/beam
! Combined flux in latest and established models = 2.53219 Jy
keep
! Adding 340 model components to the UV plane model.
! The established model now contains 566 components and 2.53219 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv117_uvs/J1800+7828_X_map.fits
! Inverting map 
! Your choice of large map pixels excluded 0.341% of the data.
!  The x-axis pixel size should ideally be below 0.1718 milli-arcsec
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7831 x 1.175 at -87.97 degrees (North through East)
! Clean map  min=-0.0045574  max=2.0437 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv117_uvs/J1800+7828_X_map.fits
wmodel /scr/pima/rv117_uvs/J1800+7828_X_map.mod
! Writing 566 model components to file: /scr/pima/rv117_uvs/J1800+7828_X_map.mod
wobs   /scr/pima/rv117_uvs/J1800+7828_X_uvs.fits
! Writing UV FITS file: /scr/pima/rv117_uvs/J1800+7828_X_uvs.fits
wwins  /scr/pima/rv117_uvs/J1800+7828_X_map.win
! wwins: Wrote 14 windows to /scr/pima/rv117_uvs/J1800+7828_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 2.04372 
invert
! Inverting map 
! Your choice of large map pixels excluded 0.341% of the data.
!  The x-axis pixel size should ideally be below 0.1718 milli-arcsec
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000553945 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.0813143 0.0813143 0.162629 0.325257 0.650514 1.30103 2.60206 5.20411 10.4082 20.8165 41.6329 83.2658
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0016 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       2.043 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  3689.39 
quit
! Quitting program
! Log file /scr/pima/rv117_uvs/J1800+7828_X_dfm.log closed on Sat Dec  9 23:45:35 2017