! Started logfile: /scr/pima/rv117_uvs/J1522-2730_X_dfm.log on Sat Dec  9 23:44:45 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.36575
obs     /scr/pima/rv117_uvs/J1522-2730_X_uva.fits
! Reading UV FITS file: /scr/pima/rv117_uvs/J1522-2730_X_uva.fits
! AN table 1: 2 integrations on 3 of 3 possible baselines.
! AN table 2: 4 integrations on 3 of 3 possible baselines.
! AN table 3: 8 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.526455 visibilities/baseline/integration-bin.
! Found source: J1522-2730
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.36575e+09        8e+06          1        8e+06
!  02        2  8.44575e+09        8e+06          1        8e+06
!  03        3  8.80575e+09        8e+06          1        8e+06
!  04        4  8.92575e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 74 lines of history.
! 
! Reading 796 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1522-2730_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 26 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 2.
!  A total of 26 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 3.
!  A total of 26 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 4.
!  A total of 26 telescope corrections were flagged in sub-array 3.
! 
! Fit before self-cal, rms=1.393860Jy  sigma=19.071210
! Fit after  self-cal, rms=0.208354Jy  sigma=2.569904
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.253% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
! Estimated beam: bmin=0.7165 mas, bmaj=1.43 mas, bpa=3.737 degrees
! Estimated noise=2.19194 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.715408 Jy
! Component: 100  -  total flux cleaned = 0.900747 Jy
! Total flux subtracted in 100 components = 0.900747 Jy
! Clean residual min=-0.041866 max=0.080513 Jy/beam
! Clean residual mean=-0.000029 rms=0.008853 Jy/beam
! Combined flux in latest and established models = 0.900746 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.900746 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.197142Jy  sigma=2.605070
! Fit after  self-cal, rms=0.197089Jy  sigma=2.598914
! Inverting map 
! Your choice of large map pixels excluded 0.253% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0910755 Jy
! Component: 100  -  total flux cleaned = 0.140676 Jy
! Total flux subtracted in 100 components = 0.140676 Jy
! Clean residual min=-0.028099 max=0.044933 Jy/beam
! Clean residual mean=-0.000012 rms=0.006125 Jy/beam
! Combined flux in latest and established models = 1.04142 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 10 components and 1.04142 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.138711Jy  sigma=1.691120
! Fit after  self-cal, rms=0.138620Jy  sigma=1.682519
! Inverting map 
! Your choice of large map pixels excluded 0.253% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
! Added new window around map position (-1.2, 2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0411574 Jy
! Component: 100  -  total flux cleaned = 0.0533611 Jy
! Total flux subtracted in 100 components = 0.0533611 Jy
! Clean residual min=-0.025529 max=0.039119 Jy/beam
! Clean residual mean=-0.000006 rms=0.005352 Jy/beam
! Combined flux in latest and established models = 1.09478 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 16 components and 1.09478 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.124084Jy  sigma=1.504422
! Fit after  self-cal, rms=0.123287Jy  sigma=1.486392
! Inverting map 
! Your choice of large map pixels excluded 0.253% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.253% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
! Estimated beam: bmin=0.8708 mas, bmaj=1.735 mas, bpa=4.768 degrees
! Estimated noise=1.88353 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0185703 Jy
! Component: 100  -  total flux cleaned = 0.0218146 Jy
! Component: 150  -  total flux cleaned = 0.0222381 Jy
! Component: 200  -  total flux cleaned = 0.0226325 Jy
! Total flux subtracted in 200 components = 0.0226325 Jy
! Clean residual min=-0.020665 max=0.021405 Jy/beam
! Clean residual mean=-0.000002 rms=0.004685 Jy/beam
! Combined flux in latest and established models = 1.11742 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 19 components and 1.11742 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.117235Jy  sigma=1.426593
! Fit after  self-cal, rms=0.117165Jy  sigma=1.422470
! Inverting map 
! Your choice of large map pixels excluded 0.253% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8708 x 1.735 at 4.768 degrees (North through East)
! Clean map  min=-0.019355  max=0.90934 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   HH        0.00*    ON        0.00*    WZ        0.00*    
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   HH        0.00*    SC        0.00*    WZ        0.00*    
! 
!  A total of 6 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.97     FD        0.95     HN        1.20     KP        0.99     
!   LA        1.06     MK        0.99     NL        0.99     OV        0.95     
!   PT        1.03     SC        0.96     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   HH        0.00*    ON        0.00*    WZ        0.00*    
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   HH        0.00*    SC        0.00*    WZ        0.00*    
! 
!  A total of 6 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.98     FD        0.95     HN        1.20     KP        1.00     
!   LA        1.06     MK        0.97     NL        0.98     OV        0.96     
!   PT        1.02     SC        0.96     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   HH        0.00*    ON        0.00*    WZ        0.00*    
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   HH        0.00*    SC        0.00*    WZ        0.00*    
! 
!  A total of 6 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.98     FD        0.96     HN        1.21     KP        0.99     
!   LA        1.09     MK        1.00     NL        0.99     OV        0.95     
!   PT        1.03     SC        0.97     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   HH        0.00*    ON        0.00*    WZ        0.00*    
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   HH        0.00*    SC        0.00*    WZ        0.00*    
! 
!  A total of 6 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.00     FD        0.96     HN        1.20     KP        0.99     
!   LA        1.07     MK        0.96     NL        1.00     OV        0.96     
!   PT        1.00     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.117165Jy  sigma=1.422470
! Fit after  self-cal, rms=0.090744Jy  sigma=1.082847
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.287% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
! Estimated beam: bmin=0.9462 mas, bmaj=2.655 mas, bpa=1.979 degrees
! Estimated noise=1.9585 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000493712 Jy
! Component: 100  -  total flux cleaned = -0.000992072 Jy
! Component: 150  -  total flux cleaned = -0.00140795 Jy
! Component: 200  -  total flux cleaned = -0.00196105 Jy
! Total flux subtracted in 200 components = -0.00196105 Jy
! Clean residual min=-0.014050 max=0.014714 Jy/beam
! Clean residual mean=0.000023 rms=0.003196 Jy/beam
! Combined flux in latest and established models = 1.11546 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 28 components and 1.11546 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089038Jy  sigma=1.062436
! Fit after  self-cal, rms=0.088849Jy  sigma=1.060099
! Inverting map 
! Your choice of large map pixels excluded 0.287% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088849Jy  sigma=1.060099
! Fit after  self-cal, rms=0.078619Jy  sigma=0.953784
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.287% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
! Estimated beam: bmin=0.9436 mas, bmaj=2.648 mas, bpa=1.959 degrees
! Estimated noise=1.95611 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000358929 Jy
! Component: 100  -  total flux cleaned = -0.000717107 Jy
! Component: 150  -  total flux cleaned = -0.0010396 Jy
! Component: 200  -  total flux cleaned = -0.00132516 Jy
! Total flux subtracted in 200 components = -0.00132516 Jy
! Clean residual min=-0.010940 max=0.011334 Jy/beam
! Clean residual mean=0.000022 rms=0.002545 Jy/beam
! Combined flux in latest and established models = 1.11413 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 33 components and 1.11413 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077382Jy  sigma=0.939935
! Fit after  self-cal, rms=0.077147Jy  sigma=0.937847
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.287% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-27.4, 50.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00897229 Jy
! Component: 100  -  total flux cleaned = 0.00959475 Jy
! Component: 150  -  total flux cleaned = 0.00977227 Jy
! Component: 200  -  total flux cleaned = 0.0100631 Jy
! Total flux subtracted in 200 components = 0.0100631 Jy
! Clean residual min=-0.010342 max=0.009539 Jy/beam
! Clean residual mean=0.000012 rms=0.002411 Jy/beam
! Combined flux in latest and established models = 1.12419 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 48 components and 1.12419 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075637Jy  sigma=0.917172
! Fit after  self-cal, rms=0.075460Jy  sigma=0.915295
! Inverting map 
! Your choice of large map pixels excluded 0.287% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075460Jy  sigma=0.915295
! Fit after  self-cal, rms=0.068587Jy  sigma=0.801898
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.287% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
! Estimated beam: bmin=0.9425 mas, bmaj=2.647 mas, bpa=1.949 degrees
! Estimated noise=1.95522 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00111027 Jy
! Component: 100  -  total flux cleaned = -0.000774695 Jy
! Component: 150  -  total flux cleaned = -0.00106371 Jy
! Component: 200  -  total flux cleaned = -0.0013314 Jy
! Total flux subtracted in 200 components = -0.0013314 Jy
! Clean residual min=-0.007599 max=0.007262 Jy/beam
! Clean residual mean=0.000005 rms=0.001696 Jy/beam
! Combined flux in latest and established models = 1.12286 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 56 components and 1.12286 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067603Jy  sigma=0.792307
! Fit after  self-cal, rms=0.067462Jy  sigma=0.791204
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.287% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000534202 Jy
! Component: 100  -  total flux cleaned = -0.000661135 Jy
! Component: 150  -  total flux cleaned = -0.000891942 Jy
! Component: 200  -  total flux cleaned = -0.00110048 Jy
! Total flux subtracted in 200 components = -0.00110048 Jy
! Clean residual min=-0.007246 max=0.006964 Jy/beam
! Clean residual mean=0.000006 rms=0.001657 Jy/beam
! Combined flux in latest and established models = 1.12176 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 60 components and 1.12176 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066911Jy  sigma=0.785825
! Fit after  self-cal, rms=0.066837Jy  sigma=0.785257
! Inverting map 
! Your choice of large map pixels excluded 0.287% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066837Jy  sigma=0.785257
! Fit after  self-cal, rms=0.066896Jy  sigma=0.783248
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.287% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
! Estimated beam: bmin=2.252 mas, bmaj=5.698 mas, bpa=-0.3374 degrees
! Estimated noise=2.35649 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000818809 Jy
! Component: 100  -  total flux cleaned = -0.00119583 Jy
! Component: 150  -  total flux cleaned = -0.00152862 Jy
! Component: 200  -  total flux cleaned = -0.00182212 Jy
! Total flux subtracted in 200 components = -0.00182212 Jy
! Clean residual min=-0.006121 max=0.007221 Jy/beam
! Clean residual mean=0.000006 rms=0.001725 Jy/beam
! Combined flux in latest and established models = 1.11994 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 65 components and 1.11994 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066672Jy  sigma=0.781758
! Fit after  self-cal, rms=0.066601Jy  sigma=0.780992
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.287% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.08457e-05 Jy
! Component: 100  -  total flux cleaned = -0.000184282 Jy
! Component: 150  -  total flux cleaned = -0.000115165 Jy
! Component: 200  -  total flux cleaned = -0.000113441 Jy
! Total flux subtracted in 200 components = -0.000113441 Jy
! Clean residual min=-0.006055 max=0.007133 Jy/beam
! Clean residual mean=0.000006 rms=0.001705 Jy/beam
! Combined flux in latest and established models = 1.11983 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 65 components and 1.11983 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066437Jy  sigma=0.780213
! Fit after  self-cal, rms=0.066380Jy  sigma=0.779469
! Inverting map 
! Your choice of large map pixels excluded 0.287% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Your choice of large map pixels excluded 0.287% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
! Estimated beam: bmin=0.9411 mas, bmaj=2.643 mas, bpa=1.921 degrees
! Estimated noise=1.95245 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9411 x 2.643 at 1.921 degrees (North through East)
! Clean map  min=-0.006269  max=0.93563 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066380Jy  sigma=0.779469
! Fit after  self-cal, rms=0.064008Jy  sigma=0.723853
! Inverting map and beam 
! Your choice of large map pixels excluded 0.287% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
! Estimated beam: bmin=0.9407 mas, bmaj=2.641 mas, bpa=1.801 degrees
! Estimated noise=1.95057 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00111429 Jy
! Component: 100  -  total flux cleaned = -0.00144461 Jy
! Component: 150  -  total flux cleaned = -0.00173866 Jy
! Component: 200  -  total flux cleaned = -0.00191866 Jy
! Total flux subtracted in 200 components = -0.00191866 Jy
! Clean residual min=-0.006330 max=0.006638 Jy/beam
! Clean residual mean=0.000003 rms=0.001564 Jy/beam
! Combined flux in latest and established models = 1.11791 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 70 components and 1.11791 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063569Jy  sigma=0.719005
! Fit after  self-cal, rms=0.063513Jy  sigma=0.718634
! Inverting map 
! Your choice of large map pixels excluded 0.287% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000405178 Jy
! Component: 100  -  total flux cleaned = -0.000658659 Jy
! Component: 150  -  total flux cleaned = -0.000818454 Jy
! Component: 200  -  total flux cleaned = -0.000970449 Jy
! Total flux subtracted in 200 components = -0.000970449 Jy
! Clean residual min=-0.006270 max=0.006428 Jy/beam
! Clean residual mean=0.000003 rms=0.001547 Jy/beam
! Combined flux in latest and established models = 1.11694 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 74 components and 1.11694 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063241Jy  sigma=0.715758
! Fit after  self-cal, rms=0.063214Jy  sigma=0.715557
! Inverting map 
! Your choice of large map pixels excluded 0.287% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063214Jy  sigma=0.715557
! Fit after  self-cal, rms=0.063293Jy  sigma=0.714825
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.287% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
! Estimated beam: bmin=0.7702 mas, bmaj=2.206 mas, bpa=1.322 degrees
! Estimated noise=2.26197 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.711817 Jy
! Component: 100  -  total flux cleaned = 0.905335 Jy
! Component: 150  -  total flux cleaned = 0.996716 Jy
! Component: 200  -  total flux cleaned = 1.04343 Jy
! Total flux subtracted in 200 components = 1.04343 Jy
! Clean residual min=-0.013943 max=0.022193 Jy/beam
! Clean residual mean=-0.000002 rms=0.003192 Jy/beam
! Combined flux in latest and established models = 1.04343 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 1.04343 Jy
! Inverting map and beam 
! Your choice of large map pixels excluded 0.287% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
! Estimated beam: bmin=0.9402 mas, bmaj=2.639 mas, bpa=1.799 degrees
! Estimated noise=1.94923 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0304464 Jy
! Component: 100  -  total flux cleaned = 0.0460114 Jy
! Component: 150  -  total flux cleaned = 0.0557524 Jy
! Component: 200  -  total flux cleaned = 0.0623199 Jy
! Total flux subtracted in 200 components = 0.0623199 Jy
! Clean residual min=-0.006942 max=0.008379 Jy/beam
! Clean residual mean=0.000001 rms=0.001685 Jy/beam
! Combined flux in latest and established models = 1.10575 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 32 components and 1.10575 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.287% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
! Added new window around map position (-1.4, -1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00621593 Jy
! Component: 100  -  total flux cleaned = 0.00677524 Jy
! Component: 150  -  total flux cleaned = 0.00726908 Jy
! Component: 200  -  total flux cleaned = 0.00741526 Jy
! Total flux subtracted in 200 components = 0.00741526 Jy
! Clean residual min=-0.006233 max=0.006034 Jy/beam
! Clean residual mean=0.000004 rms=0.001534 Jy/beam
! Combined flux in latest and established models = 1.11316 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 49 components and 1.11316 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.287% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.287% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
! Estimated beam: bmin=2.253 mas, bmaj=5.703 mas, bpa=-0.4026 degrees
! Estimated noise=2.35337 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00220098 Jy
! Component: 100  -  total flux cleaned = 0.00288872 Jy
! Component: 150  -  total flux cleaned = 0.00345402 Jy
! Component: 200  -  total flux cleaned = 0.00375157 Jy
! Total flux subtracted in 200 components = 0.00375157 Jy
! Clean residual min=-0.004953 max=0.006260 Jy/beam
! Clean residual mean=0.000005 rms=0.001532 Jy/beam
! Combined flux in latest and established models = 1.11691 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000156713 Jy
! Component: 100  -  total flux cleaned = 0.000155739 Jy
! Component: 150  -  total flux cleaned = 0.000155824 Jy
! Component: 200  -  total flux cleaned = 0.000194677 Jy
! Total flux subtracted in 200 components = 0.000194677 Jy
! Clean residual min=-0.004940 max=0.006270 Jy/beam
! Clean residual mean=0.000006 rms=0.001524 Jy/beam
! Combined flux in latest and established models = 1.11711 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 68 components and 1.11711 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.287% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Your choice of large map pixels excluded 0.287% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
! Estimated beam: bmin=0.9402 mas, bmaj=2.639 mas, bpa=1.799 degrees
! Estimated noise=1.94923 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000444427 Jy
! Component: 100  -  total flux cleaned = -0.000573619 Jy
! Component: 150  -  total flux cleaned = -0.000820319 Jy
! Component: 200  -  total flux cleaned = -0.000935296 Jy
! Total flux subtracted in 200 components = -0.000935296 Jy
! Clean residual min=-0.005948 max=0.006052 Jy/beam
! Clean residual mean=0.000004 rms=0.001477 Jy/beam
! Combined flux in latest and established models = 1.11617 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 74 components and 1.11617 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062744Jy  sigma=0.709585
! Fit after  self-cal, rms=0.062452Jy  sigma=0.705855
wmodel J1522-2730_X_map.mod
! Writing 74 model components to file: J1522-2730_X_map.mod
wobs   J1522-2730_X_uvs.fits
! Writing UV FITS file: J1522-2730_X_uvs.fits
wwins  J1522-2730_X_map.win
! wwins: Wrote 4 windows to J1522-2730_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! Your choice of large map pixels excluded 0.287% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -2.03935e-05 Jy
! Component: 100  -  total flux cleaned = -0.000417276 Jy
! Component: 150  -  total flux cleaned = -0.00128643 Jy
! Component: 200  -  total flux cleaned = -0.0018513 Jy
! Component: 250  -  total flux cleaned = -0.00222106 Jy
! Component: 300  -  total flux cleaned = -0.00294059 Jy
! Component: 350  -  total flux cleaned = -0.00346857 Jy
! Component: 400  -  total flux cleaned = -0.00424351 Jy
! Component: 450  -  total flux cleaned = -0.00449556 Jy
! Component: 500  -  total flux cleaned = -0.00491162 Jy
! Component: 550  -  total flux cleaned = -0.00507539 Jy
! Component: 600  -  total flux cleaned = -0.00547697 Jy
! Component: 650  -  total flux cleaned = -0.00571467 Jy
! Component: 700  -  total flux cleaned = -0.00602669 Jy
! Component: 750  -  total flux cleaned = -0.00633139 Jy
! Component: 800  -  total flux cleaned = -0.00640731 Jy
! Component: 850  -  total flux cleaned = -0.00655618 Jy
! Component: 900  -  total flux cleaned = -0.00692154 Jy
! Component: 950  -  total flux cleaned = -0.00699354 Jy
! Component: 1000  -  total flux cleaned = -0.00713608 Jy
! Component: 1050  -  total flux cleaned = -0.00769572 Jy
! Component: 1100  -  total flux cleaned = -0.00790253 Jy
! Component: 1150  -  total flux cleaned = -0.00797061 Jy
! Component: 1200  -  total flux cleaned = -0.00810578 Jy
! Component: 1250  -  total flux cleaned = -0.0084388 Jy
! Component: 1300  -  total flux cleaned = -0.00843825 Jy
! Component: 1350  -  total flux cleaned = -0.00863406 Jy
! Component: 1400  -  total flux cleaned = -0.00869804 Jy
! Component: 1450  -  total flux cleaned = -0.00882666 Jy
! Component: 1500  -  total flux cleaned = -0.00882637 Jy
! Component: 1550  -  total flux cleaned = -0.00895085 Jy
! Component: 1600  -  total flux cleaned = -0.00901189 Jy
! Component: 1650  -  total flux cleaned = -0.00919473 Jy
! Component: 1700  -  total flux cleaned = -0.00919511 Jy
! Component: 1750  -  total flux cleaned = -0.0093136 Jy
! Component: 1800  -  total flux cleaned = -0.00931343 Jy
! Component: 1850  -  total flux cleaned = -0.00913919 Jy
! Component: 1900  -  total flux cleaned = -0.0091973 Jy
! Component: 1950  -  total flux cleaned = -0.00942664 Jy
! Component: 2000  -  total flux cleaned = -0.00936972 Jy
! Component: 2050  -  total flux cleaned = -0.0093143 Jy
! Component: 2100  -  total flux cleaned = -0.00942553 Jy
! Component: 2150  -  total flux cleaned = -0.00953586 Jy
! Component: 2200  -  total flux cleaned = -0.00958984 Jy
! Component: 2250  -  total flux cleaned = -0.00948212 Jy
! Component: 2300  -  total flux cleaned = -0.00964183 Jy
! Component: 2350  -  total flux cleaned = -0.00958921 Jy
! Component: 2400  -  total flux cleaned = -0.00948484 Jy
! Component: 2450  -  total flux cleaned = -0.00927751 Jy
! Component: 2500  -  total flux cleaned = -0.00938059 Jy
! Component: 2550  -  total flux cleaned = -0.00932921 Jy
! Component: 2600  -  total flux cleaned = -0.0092286 Jy
! Component: 2650  -  total flux cleaned = -0.00907799 Jy
! Component: 2700  -  total flux cleaned = -0.00883032 Jy
! Component: 2750  -  total flux cleaned = -0.00883043 Jy
! Component: 2800  -  total flux cleaned = -0.00868427 Jy
! Component: 2850  -  total flux cleaned = -0.00858794 Jy
! Component: 2900  -  total flux cleaned = -0.00849174 Jy
! Component: 2950  -  total flux cleaned = -0.00868215 Jy
! Component: 3000  -  total flux cleaned = -0.00868154 Jy
! Component: 3050  -  total flux cleaned = -0.00863401 Jy
! Component: 3100  -  total flux cleaned = -0.00849406 Jy
! Component: 3150  -  total flux cleaned = -0.00840206 Jy
! Component: 3200  -  total flux cleaned = -0.00858433 Jy
! Component: 3250  -  total flux cleaned = -0.00844815 Jy
! Component: 3300  -  total flux cleaned = -0.00835813 Jy
! Component: 3350  -  total flux cleaned = -0.0083583 Jy
! Component: 3400  -  total flux cleaned = -0.00835829 Jy
! Component: 3450  -  total flux cleaned = -0.00857795 Jy
! Component: 3500  -  total flux cleaned = -0.00840352 Jy
! Component: 3550  -  total flux cleaned = -0.00849003 Jy
! Component: 3600  -  total flux cleaned = -0.00848948 Jy
! Component: 3650  -  total flux cleaned = -0.00848889 Jy
! Component: 3700  -  total flux cleaned = -0.00836201 Jy
! Component: 3750  -  total flux cleaned = -0.00840421 Jy
! Component: 3800  -  total flux cleaned = -0.00836239 Jy
! Component: 3850  -  total flux cleaned = -0.00840401 Jy
! Component: 3900  -  total flux cleaned = -0.00844508 Jy
! Component: 3950  -  total flux cleaned = -0.00840427 Jy
! Component: 4000  -  total flux cleaned = -0.00844495 Jy
! Component: 4050  -  total flux cleaned = -0.00856568 Jy
! Total flux subtracted in 4096 components = -0.00848531 Jy
! Clean residual min=-0.002148 max=0.002335 Jy/beam
! Clean residual mean=0.000002 rms=0.000727 Jy/beam
! Combined flux in latest and established models = 1.10769 Jy
keep
! Adding 294 model components to the UV plane model.
! The established model now contains 368 components and 1.10769 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv117_uvs/J1522-2730_X_map.fits
! Inverting map 
! Your choice of large map pixels excluded 0.287% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9402 x 2.639 at 1.799 degrees (North through East)
! Clean map  min=-0.0041128  max=0.94284 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv117_uvs/J1522-2730_X_map.fits
wmodel /scr/pima/rv117_uvs/J1522-2730_X_map.mod
! Writing 368 model components to file: /scr/pima/rv117_uvs/J1522-2730_X_map.mod
wobs   /scr/pima/rv117_uvs/J1522-2730_X_uvs.fits
! Writing UV FITS file: /scr/pima/rv117_uvs/J1522-2730_X_uvs.fits
wwins  /scr/pima/rv117_uvs/J1522-2730_X_map.win
! wwins: Wrote 5 windows to /scr/pima/rv117_uvs/J1522-2730_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.942837 
invert
! Inverting map 
! Your choice of large map pixels excluded 0.287% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000719576 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.228961 0.228961 0.457921 0.915843 1.83169 3.66337 7.32674 14.6535 29.307 58.6139
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0021 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.942 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1310.27 
quit
! Quitting program
! Log file /scr/pima/rv117_uvs/J1522-2730_X_dfm.log closed on Sat Dec  9 23:44:49 2017