! Started logfile: /scr/pima/rv117_uvs/J1506+3730_X_dfm.log on Sat Dec 9 23:44:35 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv117_uvs/J1506+3730_X_uva.fits ! Reading UV FITS file: /scr/pima/rv117_uvs/J1506+3730_X_uva.fits ! AN table 1: 84 integrations on 66 of 66 possible baselines. ! AN table 2: 2 integrations on 3 of 3 possible baselines. ! AN table 3: 15 integrations on 55 of 55 possible baselines. ! Apparent sampling: 0.24549 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1506+3730 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 74 lines of history. ! ! Reading 6260 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1506+3730_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 654 telescope corrections were flagged in sub-array 1. ! A total of 79 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 654 telescope corrections were flagged in sub-array 1. ! A total of 79 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 654 telescope corrections were flagged in sub-array 1. ! A total of 79 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 654 telescope corrections were flagged in sub-array 1. ! A total of 79 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.131127Jy sigma=16.185475 ! Fit after self-cal, rms=0.491500Jy sigma=7.149717 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 7.81% of the data. ! The x-axis pixel size should ideally be below 0.1696 milli-arcsec ! The y-axis pixel size should ideally be below 0.1574 milli-arcsec ! Estimated beam: bmin=0.6384 mas, bmaj=0.8502 mas, bpa=19.27 degrees ! Estimated noise=0.939178 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.393496 Jy ! Component: 100 - total flux cleaned = 0.492429 Jy ! Total flux subtracted in 100 components = 0.492429 Jy ! Clean residual min=-0.012500 max=0.048404 Jy/beam ! Clean residual mean=0.000008 rms=0.002762 Jy/beam ! Combined flux in latest and established models = 0.492429 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.492429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145637Jy sigma=1.682748 ! Fit after self-cal, rms=0.145188Jy sigma=1.677837 ! Inverting map ! Your choice of large map pixels excluded 7.81% of the data. ! The x-axis pixel size should ideally be below 0.1696 milli-arcsec ! The y-axis pixel size should ideally be below 0.1574 milli-arcsec ! Added new window around map position (-0.6, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0516203 Jy ! Component: 100 - total flux cleaned = 0.0793539 Jy ! Total flux subtracted in 100 components = 0.0793539 Jy ! Clean residual min=-0.009917 max=0.019805 Jy/beam ! Clean residual mean=0.000003 rms=0.001857 Jy/beam ! Combined flux in latest and established models = 0.571783 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 11 components and 0.571783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123735Jy sigma=1.299530 ! Fit after self-cal, rms=0.122609Jy sigma=1.280090 ! Inverting map ! Your choice of large map pixels excluded 7.81% of the data. ! The x-axis pixel size should ideally be below 0.1696 milli-arcsec ! The y-axis pixel size should ideally be below 0.1574 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0208882 Jy ! Component: 100 - total flux cleaned = 0.0285004 Jy ! Total flux subtracted in 100 components = 0.0285004 Jy ! Clean residual min=-0.008850 max=0.012640 Jy/beam ! Clean residual mean=0.000002 rms=0.001599 Jy/beam ! Combined flux in latest and established models = 0.600283 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 13 components and 0.600283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117724Jy sigma=1.205873 ! Fit after self-cal, rms=0.117454Jy sigma=1.202023 ! Inverting map ! Your choice of large map pixels excluded 7.81% of the data. ! The x-axis pixel size should ideally be below 0.1696 milli-arcsec ! The y-axis pixel size should ideally be below 0.1574 milli-arcsec ! Added new window around map position (-0.8, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00683378 Jy ! Component: 100 - total flux cleaned = 0.00726941 Jy ! Total flux subtracted in 100 components = 0.00726941 Jy ! Clean residual min=-0.007937 max=0.010013 Jy/beam ! Clean residual mean=0.000001 rms=0.001505 Jy/beam ! Combined flux in latest and established models = 0.607553 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 17 components and 0.607553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114047Jy sigma=1.172022 ! Fit after self-cal, rms=0.113778Jy sigma=1.170531 ! Inverting map ! Your choice of large map pixels excluded 7.81% of the data. ! The x-axis pixel size should ideally be below 0.1696 milli-arcsec ! The y-axis pixel size should ideally be below 0.1574 milli-arcsec ! Added new window around map position (-1.8, -1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00631574 Jy ! Component: 100 - total flux cleaned = 0.00665324 Jy ! Total flux subtracted in 100 components = 0.00665324 Jy ! Clean residual min=-0.007212 max=0.008600 Jy/beam ! Clean residual mean=0.000001 rms=0.001444 Jy/beam ! Combined flux in latest and established models = 0.614206 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 21 components and 0.614206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111743Jy sigma=1.150897 ! Fit after self-cal, rms=0.111591Jy sigma=1.150196 ! Inverting map ! Your choice of large map pixels excluded 7.81% of the data. ! The x-axis pixel size should ideally be below 0.1696 milli-arcsec ! The y-axis pixel size should ideally be below 0.1574 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 7.81% of the data. ! The x-axis pixel size should ideally be below 0.1696 milli-arcsec ! The y-axis pixel size should ideally be below 0.1574 milli-arcsec ! Estimated beam: bmin=0.6809 mas, bmaj=0.8849 mas, bpa=24.79 degrees ! Estimated noise=0.732093 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00284207 Jy ! Component: 100 - total flux cleaned = 0.00373385 Jy ! Component: 150 - total flux cleaned = 0.00449204 Jy ! Component: 200 - total flux cleaned = 0.00449104 Jy ! Total flux subtracted in 200 components = 0.00449104 Jy ! Clean residual min=-0.006630 max=0.009480 Jy/beam ! Clean residual mean=-0.000004 rms=0.001375 Jy/beam ! Combined flux in latest and established models = 0.618697 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 28 components and 0.618697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104918Jy sigma=1.112252 ! Fit after self-cal, rms=0.104633Jy sigma=1.111236 ! Inverting map ! Your choice of large map pixels excluded 7.81% of the data. ! The x-axis pixel size should ideally be below 0.1696 milli-arcsec ! The y-axis pixel size should ideally be below 0.1574 milli-arcsec ! Added new window around map position (-6.6, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00457202 Jy ! Component: 100 - total flux cleaned = 0.00518002 Jy ! Component: 150 - total flux cleaned = 0.00602781 Jy ! Component: 200 - total flux cleaned = 0.00655472 Jy ! Total flux subtracted in 200 components = 0.00655472 Jy ! Clean residual min=-0.006173 max=0.007897 Jy/beam ! Clean residual mean=-0.000010 rms=0.001268 Jy/beam ! Combined flux in latest and established models = 0.625252 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 38 components and 0.625252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102058Jy sigma=1.091056 ! Fit after self-cal, rms=0.101860Jy sigma=1.090104 ! Inverting map ! Your choice of large map pixels excluded 7.81% of the data. ! The x-axis pixel size should ideally be below 0.1696 milli-arcsec ! The y-axis pixel size should ideally be below 0.1574 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6809 x 0.8849 at 24.79 degrees (North through East) ! Clean map min=-0.0051809 max=0.5043 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 72 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.07 HH 0.85 HN 0.99 ! KP 1.04 LA 1.02 NL 1.00 NY 1.01 ! ON 0.98 PT 1.00 SC 1.03 WZ 1.02 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* MK 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 1.01 HN 1.03 KP 1.03 ! LA 1.00 MK 1.05 NL 1.01 NY 1.09 ! OV 0.98 PT 1.01 SC 0.98 ! ! ! Correcting IF 2. ! A total of 72 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.04 HH 0.85 HN 0.99 ! KP 1.03 LA 1.00 NL 0.99 NY 1.00 ! ON 1.00 PT 1.01 SC 1.04 WZ 1.02 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* MK 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.01 HN 1.02 KP 1.01 ! LA 0.98 MK 1.03 NL 1.01 NY 1.14 ! OV 0.98 PT 1.01 SC 0.98 ! ! ! Correcting IF 3. ! A total of 72 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.03 HH 0.89 HN 0.98 ! KP 1.02 LA 0.99 NL 0.98 NY 0.97 ! ON 0.96 PT 1.00 SC 0.97 WZ 1.00 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* MK 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.98 HN 1.00 KP 0.99 ! LA 0.99 MK 1.00 NL 1.00 NY 1.07 ! OV 0.95 PT 0.98 SC 0.96 ! ! ! Correcting IF 4. ! A total of 72 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HH 0.97 HN 0.97 ! KP 1.01 LA 0.97 NL 0.99 NY 0.97 ! ON 0.96 PT 0.97 SC 0.98 WZ 0.99 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* MK 0.00* WZ 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 0.97 HN 0.97 KP 0.99 ! LA 0.99 MK 0.97 NL 0.97 NY 1.08 ! OV 0.96 PT 1.00 SC 0.93 ! ! ! Fit before self-cal, rms=0.101860Jy sigma=1.090104 ! Fit after self-cal, rms=0.084859Jy sigma=1.011579 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 6.44% of the data. ! The x-axis pixel size should ideally be below 0.194 milli-arcsec ! The y-axis pixel size should ideally be below 0.1574 milli-arcsec ! Estimated beam: bmin=0.6702 mas, bmaj=0.8899 mas, bpa=26.49 degrees ! Estimated noise=0.733046 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00593608 Jy ! Component: 100 - total flux cleaned = 0.00882082 Jy ! Component: 150 - total flux cleaned = 0.00980141 Jy ! Component: 200 - total flux cleaned = 0.0104325 Jy ! Total flux subtracted in 200 components = 0.0104325 Jy ! Clean residual min=-0.003846 max=0.004350 Jy/beam ! Clean residual mean=-0.000026 rms=0.000903 Jy/beam ! Combined flux in latest and established models = 0.635684 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 62 components and 0.635684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084231Jy sigma=1.002118 ! Fit after self-cal, rms=0.084006Jy sigma=1.001338 ! Inverting map ! Your choice of large map pixels excluded 6.44% of the data. ! The x-axis pixel size should ideally be below 0.194 milli-arcsec ! The y-axis pixel size should ideally be below 0.1574 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084006Jy sigma=1.001338 ! Fit after self-cal, rms=0.082853Jy sigma=0.987590 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 6.44% of the data. ! The x-axis pixel size should ideally be below 0.194 milli-arcsec ! The y-axis pixel size should ideally be below 0.1574 milli-arcsec ! Estimated beam: bmin=0.6703 mas, bmaj=0.8878 mas, bpa=26.61 degrees ! Estimated noise=0.733433 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00339308 Jy ! Component: 100 - total flux cleaned = 0.00490103 Jy ! Component: 150 - total flux cleaned = 0.00566532 Jy ! Component: 200 - total flux cleaned = 0.00616472 Jy ! Total flux subtracted in 200 components = 0.00616472 Jy ! Clean residual min=-0.003563 max=0.003818 Jy/beam ! Clean residual mean=-0.000003 rms=0.000840 Jy/beam ! Combined flux in latest and established models = 0.641849 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 72 components and 0.641849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082409Jy sigma=0.982260 ! Fit after self-cal, rms=0.082350Jy sigma=0.981971 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 6.44% of the data. ! The x-axis pixel size should ideally be below 0.194 milli-arcsec ! The y-axis pixel size should ideally be below 0.1574 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.8, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00209211 Jy ! Component: 100 - total flux cleaned = 0.00258588 Jy ! Component: 150 - total flux cleaned = 0.00294437 Jy ! Component: 200 - total flux cleaned = 0.00320089 Jy ! Total flux subtracted in 200 components = 0.00320089 Jy ! Clean residual min=-0.003443 max=0.003472 Jy/beam ! Clean residual mean=-0.000006 rms=0.000814 Jy/beam ! Combined flux in latest and established models = 0.64505 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 82 components and 0.64505 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082048Jy sigma=0.978393 ! Fit after self-cal, rms=0.081988Jy sigma=0.978223 ! Inverting map ! Your choice of large map pixels excluded 6.44% of the data. ! The x-axis pixel size should ideally be below 0.194 milli-arcsec ! The y-axis pixel size should ideally be below 0.1574 milli-arcsec ! Added new window around map position (-13.2, -12.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00278842 Jy ! Component: 100 - total flux cleaned = 0.00346383 Jy ! Component: 150 - total flux cleaned = 0.00362717 Jy ! Component: 200 - total flux cleaned = 0.00362473 Jy ! Total flux subtracted in 200 components = 0.00362473 Jy ! Clean residual min=-0.003318 max=0.003256 Jy/beam ! Clean residual mean=-0.000009 rms=0.000791 Jy/beam ! Combined flux in latest and established models = 0.648674 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 96 components and 0.648674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081764Jy sigma=0.975201 ! Fit after self-cal, rms=0.081723Jy sigma=0.975032 ! Inverting map ! Your choice of large map pixels excluded 6.44% of the data. ! The x-axis pixel size should ideally be below 0.194 milli-arcsec ! The y-axis pixel size should ideally be below 0.1574 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081723Jy sigma=0.975032 ! Fit after self-cal, rms=0.080750Jy sigma=0.964617 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 6.44% of the data. ! The x-axis pixel size should ideally be below 0.194 milli-arcsec ! The y-axis pixel size should ideally be below 0.1574 milli-arcsec ! Estimated beam: bmin=0.6706 mas, bmaj=0.8856 mas, bpa=26.87 degrees ! Estimated noise=0.733447 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000936254 Jy ! Component: 100 - total flux cleaned = 0.00138065 Jy ! Component: 150 - total flux cleaned = 0.00178207 Jy ! Component: 200 - total flux cleaned = 0.00214885 Jy ! Total flux subtracted in 200 components = 0.00214885 Jy ! Clean residual min=-0.003350 max=0.003321 Jy/beam ! Clean residual mean=-0.000003 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.650823 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 103 components and 0.650823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080521Jy sigma=0.962143 ! Fit after self-cal, rms=0.080478Jy sigma=0.962003 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 6.44% of the data. ! The x-axis pixel size should ideally be below 0.194 milli-arcsec ! The y-axis pixel size should ideally be below 0.1574 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000310437 Jy ! Component: 100 - total flux cleaned = 0.000650428 Jy ! Component: 150 - total flux cleaned = 0.000904057 Jy ! Component: 200 - total flux cleaned = 0.00120202 Jy ! Total flux subtracted in 200 components = 0.00120202 Jy ! Clean residual min=-0.003277 max=0.003245 Jy/beam ! Clean residual mean=-0.000004 rms=0.000690 Jy/beam ! Combined flux in latest and established models = 0.652025 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 110 components and 0.652025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080387Jy sigma=0.960741 ! Fit after self-cal, rms=0.080345Jy sigma=0.960657 ! Inverting map ! Your choice of large map pixels excluded 6.44% of the data. ! The x-axis pixel size should ideally be below 0.194 milli-arcsec ! The y-axis pixel size should ideally be below 0.1574 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080345Jy sigma=0.960657 ! Fit after self-cal, rms=0.080087Jy sigma=0.960301 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 6.44% of the data. ! The x-axis pixel size should ideally be below 0.194 milli-arcsec ! The y-axis pixel size should ideally be below 0.1574 milli-arcsec ! Estimated beam: bmin=2.252 mas, bmaj=2.836 mas, bpa=-58.4 degrees ! Estimated noise=1.07581 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00296597 Jy ! Component: 100 - total flux cleaned = 0.00465755 Jy ! Component: 150 - total flux cleaned = 0.00505485 Jy ! Component: 200 - total flux cleaned = 0.00513803 Jy ! Total flux subtracted in 200 components = 0.00513803 Jy ! Clean residual min=-0.003830 max=0.003080 Jy/beam ! Clean residual mean=-0.000023 rms=0.000991 Jy/beam ! Combined flux in latest and established models = 0.657164 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 119 components and 0.657163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080112Jy sigma=0.960187 ! Fit after self-cal, rms=0.080090Jy sigma=0.960003 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 6.44% of the data. ! The x-axis pixel size should ideally be below 0.194 milli-arcsec ! The y-axis pixel size should ideally be below 0.1574 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000507224 Jy ! Component: 100 - total flux cleaned = 0.000673767 Jy ! Component: 150 - total flux cleaned = 0.000746472 Jy ! Component: 200 - total flux cleaned = 0.000714446 Jy ! Total flux subtracted in 200 components = 0.000714446 Jy ! Clean residual min=-0.003818 max=0.003081 Jy/beam ! Clean residual mean=-0.000025 rms=0.000986 Jy/beam ! Combined flux in latest and established models = 0.657878 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 127 components and 0.657878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080110Jy sigma=0.960250 ! Fit after self-cal, rms=0.080107Jy sigma=0.960197 ! Inverting map ! Your choice of large map pixels excluded 6.44% of the data. ! The x-axis pixel size should ideally be below 0.194 milli-arcsec ! The y-axis pixel size should ideally be below 0.1574 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 6.44% of the data. ! The x-axis pixel size should ideally be below 0.194 milli-arcsec ! The y-axis pixel size should ideally be below 0.1574 milli-arcsec ! Estimated beam: bmin=0.6704 mas, bmaj=0.8841 mas, bpa=27.05 degrees ! Estimated noise=0.733522 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6704 x 0.8841 at 27.05 degrees (North through East) ! Clean map min=-0.0027868 max=0.50265 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080107Jy sigma=0.960197 ! Fit after self-cal, rms=0.074785Jy sigma=0.866014 ! Inverting map and beam ! Your choice of large map pixels excluded 6.44% of the data. ! The x-axis pixel size should ideally be below 0.194 milli-arcsec ! The y-axis pixel size should ideally be below 0.1574 milli-arcsec ! Estimated beam: bmin=0.6703 mas, bmaj=0.8837 mas, bpa=27.09 degrees ! Estimated noise=0.734115 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000819108 Jy ! Component: 100 - total flux cleaned = 0.000617969 Jy ! Component: 150 - total flux cleaned = 0.000498622 Jy ! Component: 200 - total flux cleaned = 0.000442387 Jy ! Total flux subtracted in 200 components = 0.000442387 Jy ! Clean residual min=-0.003108 max=0.003040 Jy/beam ! Clean residual mean=-0.000004 rms=0.000676 Jy/beam ! Combined flux in latest and established models = 0.65832 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 134 components and 0.65832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074655Jy sigma=0.864417 ! Fit after self-cal, rms=0.074619Jy sigma=0.864329 ! Inverting map ! Your choice of large map pixels excluded 6.44% of the data. ! The x-axis pixel size should ideally be below 0.194 milli-arcsec ! The y-axis pixel size should ideally be below 0.1574 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.44701e-05 Jy ! Component: 100 - total flux cleaned = 2.23077e-05 Jy ! Component: 150 - total flux cleaned = 7.30374e-05 Jy ! Component: 200 - total flux cleaned = 0.0001217 Jy ! Total flux subtracted in 200 components = 0.0001217 Jy ! Clean residual min=-0.003071 max=0.003010 Jy/beam ! Clean residual mean=-0.000004 rms=0.000673 Jy/beam ! Combined flux in latest and established models = 0.658442 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 141 components and 0.658442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074576Jy sigma=0.863552 ! Fit after self-cal, rms=0.074544Jy sigma=0.863496 ! Inverting map ! Your choice of large map pixels excluded 6.44% of the data. ! The x-axis pixel size should ideally be below 0.194 milli-arcsec ! The y-axis pixel size should ideally be below 0.1574 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074544Jy sigma=0.863496 ! Fit after self-cal, rms=0.074323Jy sigma=0.863247 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 6.44% of the data. ! The x-axis pixel size should ideally be below 0.194 milli-arcsec ! The y-axis pixel size should ideally be below 0.1574 milli-arcsec ! Estimated beam: bmin=0.6336 mas, bmaj=0.8371 mas, bpa=23.8 degrees ! Estimated noise=0.954585 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.391362 Jy ! Component: 100 - total flux cleaned = 0.496894 Jy ! Component: 150 - total flux cleaned = 0.548917 Jy ! Component: 200 - total flux cleaned = 0.577991 Jy ! Total flux subtracted in 200 components = 0.577991 Jy ! Clean residual min=-0.006234 max=0.015053 Jy/beam ! Clean residual mean=0.000006 rms=0.001381 Jy/beam ! Combined flux in latest and established models = 0.577991 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.577991 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 6.44% of the data. ! The x-axis pixel size should ideally be below 0.194 milli-arcsec ! The y-axis pixel size should ideally be below 0.1574 milli-arcsec ! Estimated beam: bmin=0.67 mas, bmaj=0.8825 mas, bpa=27.26 degrees ! Estimated noise=0.734151 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0235723 Jy ! Component: 100 - total flux cleaned = 0.0382349 Jy ! Component: 150 - total flux cleaned = 0.0465307 Jy ! Component: 200 - total flux cleaned = 0.0504526 Jy ! Total flux subtracted in 200 components = 0.0504526 Jy ! Clean residual min=-0.004767 max=0.005479 Jy/beam ! Clean residual mean=0.000022 rms=0.000996 Jy/beam ! Combined flux in latest and established models = 0.628443 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 25 components and 0.628443 Jy ! Inverting map ! Your choice of large map pixels excluded 6.44% of the data. ! The x-axis pixel size should ideally be below 0.194 milli-arcsec ! The y-axis pixel size should ideally be below 0.1574 milli-arcsec ! Added new window around map position (-1.8, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00443291 Jy ! Component: 100 - total flux cleaned = 0.00731678 Jy ! Component: 150 - total flux cleaned = 0.0090716 Jy ! Component: 200 - total flux cleaned = 0.0108996 Jy ! Total flux subtracted in 200 components = 0.0108996 Jy ! Clean residual min=-0.003668 max=0.003835 Jy/beam ! Clean residual mean=0.000013 rms=0.000859 Jy/beam ! Combined flux in latest and established models = 0.639343 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 43 components and 0.639343 Jy ! Inverting map ! Your choice of large map pixels excluded 6.44% of the data. ! The x-axis pixel size should ideally be below 0.194 milli-arcsec ! The y-axis pixel size should ideally be below 0.1574 milli-arcsec ! Added new window around map position (0.2, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00214737 Jy ! Component: 100 - total flux cleaned = 0.00372308 Jy ! Component: 150 - total flux cleaned = 0.00519651 Jy ! Component: 200 - total flux cleaned = 0.00657279 Jy ! Total flux subtracted in 200 components = 0.00657279 Jy ! Clean residual min=-0.003545 max=0.003482 Jy/beam ! Clean residual mean=0.000007 rms=0.000789 Jy/beam ! Combined flux in latest and established models = 0.645916 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 54 components and 0.645916 Jy ! Inverting map ! Your choice of large map pixels excluded 6.44% of the data. ! The x-axis pixel size should ideally be below 0.194 milli-arcsec ! The y-axis pixel size should ideally be below 0.1574 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 6.44% of the data. ! The x-axis pixel size should ideally be below 0.194 milli-arcsec ! The y-axis pixel size should ideally be below 0.1574 milli-arcsec ! Estimated beam: bmin=2.251 mas, bmaj=2.834 mas, bpa=-58.42 degrees ! Estimated noise=1.07841 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00673187 Jy ! Component: 100 - total flux cleaned = 0.0108435 Jy ! Component: 150 - total flux cleaned = 0.0135561 Jy ! Component: 200 - total flux cleaned = 0.0154619 Jy ! Total flux subtracted in 200 components = 0.0154619 Jy ! Clean residual min=-0.003828 max=0.003259 Jy/beam ! Clean residual mean=-0.000021 rms=0.000989 Jy/beam ! Combined flux in latest and established models = 0.661377 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0005367 Jy ! Component: 100 - total flux cleaned = 0.000688596 Jy ! Component: 150 - total flux cleaned = 0.000866124 Jy ! Component: 200 - total flux cleaned = 0.000982785 Jy ! Total flux subtracted in 200 components = 0.000982785 Jy ! Clean residual min=-0.003794 max=0.003083 Jy/beam ! Clean residual mean=-0.000024 rms=0.000964 Jy/beam ! Combined flux in latest and established models = 0.66236 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 98 components and 0.66236 Jy ! Inverting map ! Your choice of large map pixels excluded 6.44% of the data. ! The x-axis pixel size should ideally be below 0.194 milli-arcsec ! The y-axis pixel size should ideally be below 0.1574 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 6.44% of the data. ! The x-axis pixel size should ideally be below 0.194 milli-arcsec ! The y-axis pixel size should ideally be below 0.1574 milli-arcsec ! Estimated beam: bmin=0.67 mas, bmaj=0.8825 mas, bpa=27.26 degrees ! Estimated noise=0.734151 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0020698 Jy ! Component: 100 - total flux cleaned = -0.00220716 Jy ! Component: 150 - total flux cleaned = -0.00220463 Jy ! Component: 200 - total flux cleaned = -0.00220931 Jy ! Total flux subtracted in 200 components = -0.00220931 Jy ! Clean residual min=-0.003222 max=0.003217 Jy/beam ! Clean residual mean=-0.000005 rms=0.000710 Jy/beam ! Combined flux in latest and established models = 0.660151 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 105 components and 0.660151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075805Jy sigma=0.876571 ! Fit after self-cal, rms=0.075703Jy sigma=0.875504 wmodel J1506+3730_X_map.mod ! Writing 105 model components to file: J1506+3730_X_map.mod wobs J1506+3730_X_uvs.fits ! Writing UV FITS file: J1506+3730_X_uvs.fits wwins J1506+3730_X_map.win ! wwins: Wrote 10 windows to J1506+3730_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 6.44% of the data. ! The x-axis pixel size should ideally be below 0.194 milli-arcsec ! The y-axis pixel size should ideally be below 0.1574 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000127155 Jy ! Component: 100 - total flux cleaned = -0.000181432 Jy ! Component: 150 - total flux cleaned = -0.000338301 Jy ! Component: 200 - total flux cleaned = -0.000287023 Jy ! Component: 250 - total flux cleaned = -3.68414e-05 Jy ! Component: 300 - total flux cleaned = 1.19171e-05 Jy ! Component: 350 - total flux cleaned = 1.15049e-05 Jy ! Component: 400 - total flux cleaned = -8.36612e-05 Jy ! Component: 450 - total flux cleaned = -3.65856e-05 Jy ! Component: 500 - total flux cleaned = 0.00010258 Jy ! Component: 550 - total flux cleaned = 0.00028538 Jy ! Component: 600 - total flux cleaned = 0.000239406 Jy ! Component: 650 - total flux cleaned = 0.000283392 Jy ! Component: 700 - total flux cleaned = 0.000239111 Jy ! Component: 750 - total flux cleaned = 0.000283015 Jy ! Component: 800 - total flux cleaned = 0.000456605 Jy ! Component: 850 - total flux cleaned = 0.000499496 Jy ! Component: 900 - total flux cleaned = 0.000413956 Jy ! Component: 950 - total flux cleaned = 0.000626587 Jy ! Component: 1000 - total flux cleaned = 0.000710333 Jy ! Component: 1050 - total flux cleaned = 0.000668549 Jy ! Component: 1100 - total flux cleaned = 0.00079302 Jy ! Component: 1150 - total flux cleaned = 0.000793158 Jy ! Component: 1200 - total flux cleaned = 0.000752437 Jy ! Component: 1250 - total flux cleaned = 0.000834204 Jy ! Component: 1300 - total flux cleaned = 0.000995628 Jy ! Component: 1350 - total flux cleaned = 0.00111545 Jy ! Component: 1400 - total flux cleaned = 0.000996055 Jy ! Component: 1450 - total flux cleaned = 0.000996023 Jy ! Component: 1500 - total flux cleaned = 0.00115397 Jy ! Component: 1550 - total flux cleaned = 0.00119354 Jy ! Component: 1600 - total flux cleaned = 0.00134909 Jy ! Component: 1650 - total flux cleaned = 0.00146481 Jy ! Component: 1700 - total flux cleaned = 0.00158006 Jy ! Component: 1750 - total flux cleaned = 0.00165645 Jy ! Component: 1800 - total flux cleaned = 0.00173247 Jy ! Component: 1850 - total flux cleaned = 0.00184541 Jy ! Component: 1900 - total flux cleaned = 0.00195793 Jy ! Component: 1950 - total flux cleaned = 0.00203209 Jy ! Component: 2000 - total flux cleaned = 0.00206929 Jy ! Component: 2050 - total flux cleaned = 0.00199522 Jy ! Component: 2100 - total flux cleaned = 0.0018854 Jy ! Component: 2150 - total flux cleaned = 0.00206816 Jy ! Component: 2200 - total flux cleaned = 0.00210454 Jy ! Component: 2250 - total flux cleaned = 0.00206841 Jy ! Component: 2300 - total flux cleaned = 0.00181648 Jy ! Component: 2350 - total flux cleaned = 0.00192406 Jy ! Component: 2400 - total flux cleaned = 0.00206658 Jy ! Component: 2450 - total flux cleaned = 0.0020665 Jy ! Component: 2500 - total flux cleaned = 0.00192489 Jy ! Component: 2550 - total flux cleaned = 0.00203022 Jy ! Component: 2600 - total flux cleaned = 0.00206542 Jy ! Component: 2650 - total flux cleaned = 0.00206545 Jy ! Component: 2700 - total flux cleaned = 0.00196137 Jy ! Component: 2750 - total flux cleaned = 0.00213415 Jy ! Component: 2800 - total flux cleaned = 0.00206545 Jy ! Component: 2850 - total flux cleaned = 0.00216856 Jy ! Component: 2900 - total flux cleaned = 0.00216833 Jy ! Component: 2950 - total flux cleaned = 0.0021684 Jy ! Component: 3000 - total flux cleaned = 0.00206679 Jy ! Component: 3050 - total flux cleaned = 0.0021678 Jy ! Component: 3100 - total flux cleaned = 0.00236922 Jy ! Component: 3150 - total flux cleaned = 0.0022689 Jy ! Component: 3200 - total flux cleaned = 0.0022687 Jy ! Component: 3250 - total flux cleaned = 0.00226868 Jy ! Component: 3300 - total flux cleaned = 0.00230174 Jy ! Component: 3350 - total flux cleaned = 0.00230169 Jy ! Component: 3400 - total flux cleaned = 0.00230178 Jy ! Component: 3450 - total flux cleaned = 0.00246478 Jy ! Component: 3500 - total flux cleaned = 0.0024647 Jy ! Component: 3550 - total flux cleaned = 0.0024646 Jy ! Component: 3600 - total flux cleaned = 0.0024967 Jy ! Component: 3650 - total flux cleaned = 0.00246465 Jy ! Component: 3700 - total flux cleaned = 0.00246457 Jy ! Component: 3750 - total flux cleaned = 0.00243246 Jy ! Component: 3800 - total flux cleaned = 0.00240067 Jy ! Component: 3850 - total flux cleaned = 0.0024642 Jy ! Component: 3900 - total flux cleaned = 0.00230636 Jy ! Component: 3950 - total flux cleaned = 0.00236935 Jy ! Component: 4000 - total flux cleaned = 0.00236944 Jy ! Component: 4050 - total flux cleaned = 0.00233821 Jy ! Total flux subtracted in 4096 components = 0.00227601 Jy ! Clean residual min=-0.002014 max=0.001860 Jy/beam ! Clean residual mean=-0.000005 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.662427 Jy keep ! Adding 374 model components to the UV plane model. ! The established model now contains 475 components and 0.662427 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv117_uvs/J1506+3730_X_map.fits ! Inverting map ! Your choice of large map pixels excluded 6.44% of the data. ! The x-axis pixel size should ideally be below 0.194 milli-arcsec ! The y-axis pixel size should ideally be below 0.1574 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.67 x 0.8825 at 27.26 degrees (North through East) ! Clean map min=-0.0021905 max=0.50042 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv117_uvs/J1506+3730_X_map.fits wmodel /scr/pima/rv117_uvs/J1506+3730_X_map.mod ! Writing 475 model components to file: /scr/pima/rv117_uvs/J1506+3730_X_map.mod wobs /scr/pima/rv117_uvs/J1506+3730_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv117_uvs/J1506+3730_X_uvs.fits wwins /scr/pima/rv117_uvs/J1506+3730_X_map.win ! wwins: Wrote 11 windows to /scr/pima/rv117_uvs/J1506+3730_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.500421 invert ! Inverting map ! Your choice of large map pixels excluded 6.44% of the data. ! The x-axis pixel size should ideally be below 0.194 milli-arcsec ! The y-axis pixel size should ideally be below 0.1574 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00050982 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.305634 0.305634 0.611268 1.22254 2.44507 4.89015 9.7803 19.5606 39.1212 78.2424 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.5 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 981.565 quit ! Quitting program ! Log file /scr/pima/rv117_uvs/J1506+3730_X_dfm.log closed on Sat Dec 9 23:44:40 2017