! Started logfile: /scr/pima/rv117_uvs/J1332+0200_X_dfm.log on Sat Dec  9 23:44:12 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.36575
obs     /scr/pima/rv117_uvs/J1332+0200_X_uva.fits
! Reading UV FITS file: /scr/pima/rv117_uvs/J1332+0200_X_uva.fits
! AN table 1: 135 integrations on 36 of 36 possible baselines.
! AN table 2: 7 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.277295 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1332+0200
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.36575e+09        8e+06          1        8e+06
!  02        2  8.44575e+09        8e+06          1        8e+06
!  03        3  8.80575e+09        8e+06          1        8e+06
!  04        4  8.92575e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 74 lines of history.
! 
! Reading 5740 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1332+0200_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 660 telescope corrections were flagged in sub-array 1.
!  A total of 16 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 660 telescope corrections were flagged in sub-array 1.
!  A total of 16 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 660 telescope corrections were flagged in sub-array 1.
!  A total of 16 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 660 telescope corrections were flagged in sub-array 1.
!  A total of 16 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.145127Jy  sigma=14.705322
! Fit after  self-cal, rms=0.524585Jy  sigma=7.001080
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 10.2% of the data.
!  The x-axis pixel size should ideally be below 0.1733 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1877 milli-arcsec
! Estimated beam: bmin=0.624 mas, bmaj=0.8747 mas, bpa=-6.407 degrees
! Estimated noise=1.09229 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.379693 Jy
! Component: 100  -  total flux cleaned = 0.51886 Jy
! Total flux subtracted in 100 components = 0.51886 Jy
! Clean residual min=-0.020344 max=0.061333 Jy/beam
! Clean residual mean=-0.000012 rms=0.004142 Jy/beam
! Combined flux in latest and established models = 0.51886 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.51886 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.193795Jy  sigma=1.927802
! Fit after  self-cal, rms=0.191804Jy  sigma=1.903357
! Inverting map 
! Your choice of large map pixels excluded 10.2% of the data.
!  The x-axis pixel size should ideally be below 0.1733 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1877 milli-arcsec
! Added new window around map position (-0.6, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0675897 Jy
! Component: 100  -  total flux cleaned = 0.100951 Jy
! Total flux subtracted in 100 components = 0.100951 Jy
! Clean residual min=-0.017758 max=0.026308 Jy/beam
! Clean residual mean=-0.000005 rms=0.002484 Jy/beam
! Combined flux in latest and established models = 0.619811 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 8 components and 0.619811 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.148377Jy  sigma=1.362076
! Fit after  self-cal, rms=0.147609Jy  sigma=1.348459
! Inverting map 
! Your choice of large map pixels excluded 10.2% of the data.
!  The x-axis pixel size should ideally be below 0.1733 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1877 milli-arcsec
! Added new window around map position (-1.2, 0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0160872 Jy
! Component: 100  -  total flux cleaned = 0.0196482 Jy
! Total flux subtracted in 100 components = 0.0196482 Jy
! Clean residual min=-0.013566 max=0.016552 Jy/beam
! Clean residual mean=-0.000004 rms=0.002044 Jy/beam
! Combined flux in latest and established models = 0.639459 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 14 components and 0.639459 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.134097Jy  sigma=1.232249
! Fit after  self-cal, rms=0.133944Jy  sigma=1.229737
! Inverting map 
! Your choice of large map pixels excluded 10.2% of the data.
!  The x-axis pixel size should ideally be below 0.1733 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1877 milli-arcsec
! Added new window around map position (-0.2, -1.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00843165 Jy
! Component: 100  -  total flux cleaned = 0.00980376 Jy
! Total flux subtracted in 100 components = 0.00980376 Jy
! Clean residual min=-0.010407 max=0.012730 Jy/beam
! Clean residual mean=-0.000004 rms=0.001809 Jy/beam
! Combined flux in latest and established models = 0.649263 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 17 components and 0.649263 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.125133Jy  sigma=1.161876
! Fit after  self-cal, rms=0.125096Jy  sigma=1.160880
! Inverting map 
! Your choice of large map pixels excluded 10.2% of the data.
!  The x-axis pixel size should ideally be below 0.1733 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1877 milli-arcsec
! Added new window around map position (-1.4, -0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00410425 Jy
! Component: 100  -  total flux cleaned = 0.00517779 Jy
! Total flux subtracted in 100 components = 0.00517779 Jy
! Clean residual min=-0.008598 max=0.009840 Jy/beam
! Clean residual mean=-0.000003 rms=0.001654 Jy/beam
! Combined flux in latest and established models = 0.654441 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 21 components and 0.654441 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.119108Jy  sigma=1.115626
! Fit after  self-cal, rms=0.119048Jy  sigma=1.115117
! Inverting map 
! Your choice of large map pixels excluded 10.2% of the data.
!  The x-axis pixel size should ideally be below 0.1733 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1877 milli-arcsec
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 10.2% of the data.
!  The x-axis pixel size should ideally be below 0.1733 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1877 milli-arcsec
! Estimated beam: bmin=0.6664 mas, bmaj=0.7517 mas, bpa=-9.605 degrees
! Estimated noise=0.814787 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00207017 Jy
! Component: 100  -  total flux cleaned = -0.00143071 Jy
! Component: 150  -  total flux cleaned = -0.000330315 Jy
! Component: 200  -  total flux cleaned = 0.000623101 Jy
! Total flux subtracted in 200 components = 0.000623101 Jy
! Clean residual min=-0.008770 max=0.009565 Jy/beam
! Clean residual mean=-0.000004 rms=0.001896 Jy/beam
! Combined flux in latest and established models = 0.655064 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 26 components and 0.655064 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109071Jy  sigma=1.049159
! Fit after  self-cal, rms=0.108893Jy  sigma=1.048376
! Inverting map 
! Your choice of large map pixels excluded 10.2% of the data.
!  The x-axis pixel size should ideally be below 0.1733 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1877 milli-arcsec
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6664 x 0.7517 at -9.605 degrees (North through East)
! Clean map  min=-0.007131  max=0.48913 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 165 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.07     HH        0.90     HN        1.02     LA        1.01     
!   NL        1.00     NY        1.04     ON        0.99     SC        0.98     
!   WZ        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        0.99     HN        1.03     KP        1.02     
!   LA        0.92     MK        0.99     NL        1.01     OV        1.00     
!   PT        1.01     SC        1.06     
! 
! 
! Correcting IF 2.
!  A total of 165 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.08     HH        0.90     HN        1.05     LA        0.99     
!   NL        1.00     NY        1.03     ON        0.99     SC        0.96     
!   WZ        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     FD        1.00     HN        1.03     KP        1.01     
!   LA        0.93     MK        1.00     NL        1.02     OV        1.00     
!   PT        1.00     SC        1.08     
! 
! 
! Correcting IF 3.
!  A total of 165 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.05     HH        0.97     HN        1.03     LA        1.02     
!   NL        1.02     NY        1.02     ON        0.97     SC        0.97     
!   WZ        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.99     FD        1.00     HN        1.00     KP        1.01     
!   LA        0.93     MK        0.99     NL        1.01     OV        0.98     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 4.
!  A total of 165 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.05     HH        1.07     HN        1.03     LA        1.00     
!   NL        0.99     NY        1.03     ON        0.97     SC        0.95     
!   WZ        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        0.98     HN        1.01     KP        1.02     
!   LA        0.92     MK        0.96     NL        0.98     OV        0.99     
!   PT        0.99     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.108893Jy  sigma=1.048376
! Fit after  self-cal, rms=0.093696Jy  sigma=0.978932
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 8.08% of the data.
!  The x-axis pixel size should ideally be below 0.1733 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1877 milli-arcsec
! Estimated beam: bmin=0.6504 mas, bmaj=0.7912 mas, bpa=-4.902 degrees
! Estimated noise=0.813475 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.4, -0.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00601535 Jy
! Component: 100  -  total flux cleaned = 0.00688688 Jy
! Component: 150  -  total flux cleaned = 0.00679142 Jy
! Component: 200  -  total flux cleaned = 0.00644889 Jy
! Total flux subtracted in 200 components = 0.00644889 Jy
! Clean residual min=-0.004511 max=0.004412 Jy/beam
! Clean residual mean=-0.000001 rms=0.000970 Jy/beam
! Combined flux in latest and established models = 0.661512 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 41 components and 0.661512 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.093244Jy  sigma=0.971602
! Fit after  self-cal, rms=0.093107Jy  sigma=0.970166
! Inverting map 
! Your choice of large map pixels excluded 8.08% of the data.
!  The x-axis pixel size should ideally be below 0.1733 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1877 milli-arcsec
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.093107Jy  sigma=0.970166
! Fit after  self-cal, rms=0.092644Jy  sigma=0.956762
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 8.08% of the data.
!  The x-axis pixel size should ideally be below 0.1733 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1877 milli-arcsec
! Estimated beam: bmin=0.652 mas, bmaj=0.7936 mas, bpa=-5.47 degrees
! Estimated noise=0.815431 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00181047 Jy
! Component: 100  -  total flux cleaned = 0.00182739 Jy
! Component: 150  -  total flux cleaned = 0.00154177 Jy
! Component: 200  -  total flux cleaned = 0.00142008 Jy
! Total flux subtracted in 200 components = 0.00142008 Jy
! Clean residual min=-0.003533 max=0.003560 Jy/beam
! Clean residual mean=-0.000002 rms=0.000791 Jy/beam
! Combined flux in latest and established models = 0.662933 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 54 components and 0.662933 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092401Jy  sigma=0.954253
! Fit after  self-cal, rms=0.092391Jy  sigma=0.953905
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 8.08% of the data.
!  The x-axis pixel size should ideally be below 0.1733 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1877 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-12, 13.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00198167 Jy
! Component: 100  -  total flux cleaned = 0.00221555 Jy
! Component: 150  -  total flux cleaned = 0.00235503 Jy
! Component: 200  -  total flux cleaned = 0.002355 Jy
! Total flux subtracted in 200 components = 0.002355 Jy
! Clean residual min=-0.003227 max=0.003527 Jy/beam
! Clean residual mean=-0.000001 rms=0.000764 Jy/beam
! Combined flux in latest and established models = 0.665287 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 62 components and 0.665287 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092233Jy  sigma=0.951884
! Fit after  self-cal, rms=0.092204Jy  sigma=0.951678
! Inverting map 
! Your choice of large map pixels excluded 8.08% of the data.
!  The x-axis pixel size should ideally be below 0.1733 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1877 milli-arcsec
! Added new window around map position (43.6, 18.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00320692 Jy
! Component: 100  -  total flux cleaned = 0.00451955 Jy
! Component: 150  -  total flux cleaned = 0.00512273 Jy
! Component: 200  -  total flux cleaned = 0.00528411 Jy
! Total flux subtracted in 200 components = 0.00528411 Jy
! Clean residual min=-0.003148 max=0.003436 Jy/beam
! Clean residual mean=-0.000001 rms=0.000730 Jy/beam
! Combined flux in latest and established models = 0.670572 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 76 components and 0.670572 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092046Jy  sigma=0.949841
! Fit after  self-cal, rms=0.092019Jy  sigma=0.949639
! Inverting map 
! Your choice of large map pixels excluded 8.08% of the data.
!  The x-axis pixel size should ideally be below 0.1733 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1877 milli-arcsec
! Added new window around map position (-16.2, -46).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00285479 Jy
! Component: 100  -  total flux cleaned = 0.00412903 Jy
! Component: 150  -  total flux cleaned = 0.00484144 Jy
! Component: 200  -  total flux cleaned = 0.00504437 Jy
! Total flux subtracted in 200 components = 0.00504437 Jy
! Clean residual min=-0.003271 max=0.003272 Jy/beam
! Clean residual mean=-0.000001 rms=0.000707 Jy/beam
! Combined flux in latest and established models = 0.675616 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 87 components and 0.675616 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091909Jy  sigma=0.948081
! Fit after  self-cal, rms=0.091894Jy  sigma=0.947950
! Inverting map 
! Your choice of large map pixels excluded 8.08% of the data.
!  The x-axis pixel size should ideally be below 0.1733 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1877 milli-arcsec
! Added new window around map position (-37.4, 12.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00170134 Jy
! Component: 100  -  total flux cleaned = 0.00219975 Jy
! Component: 150  -  total flux cleaned = 0.00258031 Jy
! Component: 200  -  total flux cleaned = 0.00278126 Jy
! Total flux subtracted in 200 components = 0.00278126 Jy
! Clean residual min=-0.003186 max=0.002962 Jy/beam
! Clean residual mean=-0.000001 rms=0.000689 Jy/beam
! Combined flux in latest and established models = 0.678397 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 100 components and 0.678397 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091770Jy  sigma=0.946470
! Fit after  self-cal, rms=0.091764Jy  sigma=0.946388
! Inverting map 
! Your choice of large map pixels excluded 8.08% of the data.
!  The x-axis pixel size should ideally be below 0.1733 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1877 milli-arcsec
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091764Jy  sigma=0.946388
! Fit after  self-cal, rms=0.091557Jy  sigma=0.937188
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 8.08% of the data.
!  The x-axis pixel size should ideally be below 0.1733 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1877 milli-arcsec
! Estimated beam: bmin=0.6524 mas, bmaj=0.794 mas, bpa=-5.711 degrees
! Estimated noise=0.81559 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000181248 Jy
! Component: 100  -  total flux cleaned = 0.000118332 Jy
! Component: 150  -  total flux cleaned = 0.000169033 Jy
! Component: 200  -  total flux cleaned = 0.000216837 Jy
! Total flux subtracted in 200 components = 0.000216837 Jy
! Clean residual min=-0.003228 max=0.003034 Jy/beam
! Clean residual mean=-0.000001 rms=0.000640 Jy/beam
! Combined flux in latest and established models = 0.678614 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 115 components and 0.678614 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091476Jy  sigma=0.936237
! Fit after  self-cal, rms=0.091459Jy  sigma=0.936167
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 8.08% of the data.
!  The x-axis pixel size should ideally be below 0.1733 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1877 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000107005 Jy
! Component: 100  -  total flux cleaned = 0.000243045 Jy
! Component: 150  -  total flux cleaned = 0.000328002 Jy
! Component: 200  -  total flux cleaned = 0.00036787 Jy
! Total flux subtracted in 200 components = 0.00036787 Jy
! Clean residual min=-0.003180 max=0.002999 Jy/beam
! Clean residual mean=-0.000001 rms=0.000632 Jy/beam
! Combined flux in latest and established models = 0.678982 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 123 components and 0.678982 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091416Jy  sigma=0.935690
! Fit after  self-cal, rms=0.091402Jy  sigma=0.935648
! Inverting map 
! Your choice of large map pixels excluded 8.08% of the data.
!  The x-axis pixel size should ideally be below 0.1733 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1877 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091402Jy  sigma=0.935648
! Fit after  self-cal, rms=0.091482Jy  sigma=0.935481
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 8.08% of the data.
!  The x-axis pixel size should ideally be below 0.1733 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1877 milli-arcsec
! Estimated beam: bmin=2.518 mas, bmaj=2.771 mas, bpa=-26.23 degrees
! Estimated noise=1.12163 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00118414 Jy
! Component: 100  -  total flux cleaned = 0.00113705 Jy
! Component: 150  -  total flux cleaned = 0.00117386 Jy
! Component: 200  -  total flux cleaned = 0.00111117 Jy
! Total flux subtracted in 200 components = 0.00111117 Jy
! Clean residual min=-0.003265 max=0.003613 Jy/beam
! Clean residual mean=-0.000002 rms=0.000783 Jy/beam
! Combined flux in latest and established models = 0.680093 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 136 components and 0.680093 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091466Jy  sigma=0.935385
! Fit after  self-cal, rms=0.091461Jy  sigma=0.935339
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 8.08% of the data.
!  The x-axis pixel size should ideally be below 0.1733 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1877 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-5.6, 0.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0012319 Jy
! Component: 100  -  total flux cleaned = 0.000957298 Jy
! Component: 150  -  total flux cleaned = 0.000688559 Jy
! Component: 200  -  total flux cleaned = 0.000273735 Jy
! Total flux subtracted in 200 components = 0.000273735 Jy
! Clean residual min=-0.003053 max=0.002608 Jy/beam
! Clean residual mean=-0.000001 rms=0.000637 Jy/beam
! Combined flux in latest and established models = 0.680367 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 160 components and 0.680367 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091424Jy  sigma=0.934515
! Fit after  self-cal, rms=0.091406Jy  sigma=0.934382
! Inverting map 
! Your choice of large map pixels excluded 8.08% of the data.
!  The x-axis pixel size should ideally be below 0.1733 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1877 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Your choice of large map pixels excluded 8.08% of the data.
!  The x-axis pixel size should ideally be below 0.1733 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1877 milli-arcsec
! Estimated beam: bmin=0.6524 mas, bmaj=0.7943 mas, bpa=-5.803 degrees
! Estimated noise=0.815264 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6524 x 0.7943 at -5.803 degrees (North through East)
! Clean map  min=-0.0029542  max=0.47726 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 8.08% of the data.
!  The x-axis pixel size should ideally be below 0.1733 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1877 milli-arcsec
! Estimated beam: bmin=0.6203 mas, bmaj=0.912 mas, bpa=-5.402 degrees
! Estimated noise=1.08827 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.371434 Jy
! Component: 100  -  total flux cleaned = 0.509596 Jy
! Component: 150  -  total flux cleaned = 0.574785 Jy
! Component: 200  -  total flux cleaned = 0.611397 Jy
! Total flux subtracted in 200 components = 0.611397 Jy
! Clean residual min=-0.010988 max=0.019840 Jy/beam
! Clean residual mean=-0.000005 rms=0.001916 Jy/beam
! Combined flux in latest and established models = 0.611397 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.611397 Jy
! Inverting map and beam 
! Your choice of large map pixels excluded 8.08% of the data.
!  The x-axis pixel size should ideally be below 0.1733 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1877 milli-arcsec
! Estimated beam: bmin=0.6524 mas, bmaj=0.7943 mas, bpa=-5.803 degrees
! Estimated noise=0.815264 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0277649 Jy
! Component: 100  -  total flux cleaned = 0.031264 Jy
! Component: 150  -  total flux cleaned = 0.0334837 Jy
! Component: 200  -  total flux cleaned = 0.0365991 Jy
! Total flux subtracted in 200 components = 0.0365991 Jy
! Clean residual min=-0.009557 max=0.010415 Jy/beam
! Clean residual mean=-0.000003 rms=0.001547 Jy/beam
! Combined flux in latest and established models = 0.647996 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 25 components and 0.647996 Jy
! Inverting map 
! Your choice of large map pixels excluded 8.08% of the data.
!  The x-axis pixel size should ideally be below 0.1733 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1877 milli-arcsec
! Added new window around map position (0.6, -0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00276012 Jy
! Component: 100  -  total flux cleaned = 0.0046156 Jy
! Component: 150  -  total flux cleaned = 0.00585666 Jy
! Component: 200  -  total flux cleaned = 0.00728022 Jy
! Total flux subtracted in 200 components = 0.00728022 Jy
! Clean residual min=-0.005613 max=0.006201 Jy/beam
! Clean residual mean=-0.000003 rms=0.001140 Jy/beam
! Combined flux in latest and established models = 0.655276 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 35 components and 0.655276 Jy
! Inverting map 
! Your choice of large map pixels excluded 8.08% of the data.
!  The x-axis pixel size should ideally be below 0.1733 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1877 milli-arcsec
! Added new window around map position (0.6, 1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00191162 Jy
! Component: 100  -  total flux cleaned = 0.00301656 Jy
! Component: 150  -  total flux cleaned = 0.00478874 Jy
! Component: 200  -  total flux cleaned = 0.00662673 Jy
! Total flux subtracted in 200 components = 0.00662673 Jy
! Clean residual min=-0.004653 max=0.004281 Jy/beam
! Clean residual mean=-0.000002 rms=0.000936 Jy/beam
! Combined flux in latest and established models = 0.661903 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 61 components and 0.661903 Jy
! Inverting map 
! Your choice of large map pixels excluded 8.08% of the data.
!  The x-axis pixel size should ideally be below 0.1733 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1877 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 8.08% of the data.
!  The x-axis pixel size should ideally be below 0.1733 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1877 milli-arcsec
! Estimated beam: bmin=2.518 mas, bmaj=2.771 mas, bpa=-26.23 degrees
! Estimated noise=1.12163 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00603452 Jy
! Component: 100  -  total flux cleaned = 0.00901084 Jy
! Component: 150  -  total flux cleaned = 0.0106614 Jy
! Component: 200  -  total flux cleaned = 0.0112418 Jy
! Total flux subtracted in 200 components = 0.0112418 Jy
! Clean residual min=-0.002995 max=0.002993 Jy/beam
! Clean residual mean=-0.000003 rms=0.000718 Jy/beam
! Combined flux in latest and established models = 0.673145 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000667576 Jy
! Component: 100  -  total flux cleaned = 0.00139711 Jy
! Component: 150  -  total flux cleaned = 0.0019251 Jy
! Component: 200  -  total flux cleaned = 0.00234197 Jy
! Total flux subtracted in 200 components = 0.00234197 Jy
! Clean residual min=-0.002852 max=0.002749 Jy/beam
! Clean residual mean=-0.000002 rms=0.000641 Jy/beam
! Combined flux in latest and established models = 0.675487 Jy
! Adding 59 model components to the UV plane model.
! The established model now contains 116 components and 0.675487 Jy
! Inverting map 
! Your choice of large map pixels excluded 8.08% of the data.
!  The x-axis pixel size should ideally be below 0.1733 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1877 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Your choice of large map pixels excluded 8.08% of the data.
!  The x-axis pixel size should ideally be below 0.1733 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1877 milli-arcsec
! Estimated beam: bmin=0.6524 mas, bmaj=0.7943 mas, bpa=-5.803 degrees
! Estimated noise=0.815264 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000188593 Jy
! Component: 100  -  total flux cleaned = 0.000372563 Jy
! Component: 150  -  total flux cleaned = 0.000696595 Jy
! Component: 200  -  total flux cleaned = 0.000837421 Jy
! Total flux subtracted in 200 components = 0.000837421 Jy
! Clean residual min=-0.003421 max=0.003240 Jy/beam
! Clean residual mean=-0.000001 rms=0.000728 Jy/beam
! Combined flux in latest and established models = 0.676324 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 129 components and 0.676324 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.093164Jy  sigma=0.945202
! Fit after  self-cal, rms=0.093039Jy  sigma=0.943626
wmodel J1332+0200_X_map.mod
! Writing 129 model components to file: J1332+0200_X_map.mod
wobs   J1332+0200_X_uvs.fits
! Writing UV FITS file: J1332+0200_X_uvs.fits
wwins  J1332+0200_X_map.win
! wwins: Wrote 13 windows to J1332+0200_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! Your choice of large map pixels excluded 8.08% of the data.
!  The x-axis pixel size should ideally be below 0.1733 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1877 milli-arcsec
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000983698 Jy
! Component: 100  -  total flux cleaned = -0.00120992 Jy
! Component: 150  -  total flux cleaned = -0.0014831 Jy
! Component: 200  -  total flux cleaned = -0.00137824 Jy
! Component: 250  -  total flux cleaned = -0.00132758 Jy
! Component: 300  -  total flux cleaned = -0.00132674 Jy
! Component: 350  -  total flux cleaned = -0.00132518 Jy
! Component: 400  -  total flux cleaned = -0.00122713 Jy
! Component: 450  -  total flux cleaned = -0.00137118 Jy
! Component: 500  -  total flux cleaned = -0.0013711 Jy
! Component: 550  -  total flux cleaned = -0.00141897 Jy
! Component: 600  -  total flux cleaned = -0.00151143 Jy
! Component: 650  -  total flux cleaned = -0.00164765 Jy
! Component: 700  -  total flux cleaned = -0.00182657 Jy
! Component: 750  -  total flux cleaned = -0.00200222 Jy
! Component: 800  -  total flux cleaned = -0.00217582 Jy
! Component: 850  -  total flux cleaned = -0.00226213 Jy
! Component: 900  -  total flux cleaned = -0.00238984 Jy
! Component: 950  -  total flux cleaned = -0.00247401 Jy
! Component: 1000  -  total flux cleaned = -0.00272504 Jy
! Component: 1050  -  total flux cleaned = -0.00280779 Jy
! Component: 1100  -  total flux cleaned = -0.00305371 Jy
! Component: 1150  -  total flux cleaned = -0.00301399 Jy
! Component: 1200  -  total flux cleaned = -0.00333484 Jy
! Component: 1250  -  total flux cleaned = -0.00337453 Jy
! Component: 1300  -  total flux cleaned = -0.00357181 Jy
! Component: 1350  -  total flux cleaned = -0.0037286 Jy
! Component: 1400  -  total flux cleaned = -0.00376736 Jy
! Component: 1450  -  total flux cleaned = -0.00395943 Jy
! Component: 1500  -  total flux cleaned = -0.00403579 Jy
! Component: 1550  -  total flux cleaned = -0.00414904 Jy
! Component: 1600  -  total flux cleaned = -0.00429903 Jy
! Component: 1650  -  total flux cleaned = -0.00441036 Jy
! Component: 1700  -  total flux cleaned = -0.0044843 Jy
! Component: 1750  -  total flux cleaned = -0.00444823 Jy
! Component: 1800  -  total flux cleaned = -0.00466555 Jy
! Component: 1850  -  total flux cleaned = -0.00470158 Jy
! Component: 1900  -  total flux cleaned = -0.00473754 Jy
! Component: 1950  -  total flux cleaned = -0.00487914 Jy
! Component: 2000  -  total flux cleaned = -0.00494853 Jy
! Component: 2050  -  total flux cleaned = -0.0050181 Jy
! Component: 2100  -  total flux cleaned = -0.00498379 Jy
! Component: 2150  -  total flux cleaned = -0.00494942 Jy
! Component: 2200  -  total flux cleaned = -0.00508587 Jy
! Component: 2250  -  total flux cleaned = -0.00511963 Jy
! Component: 2300  -  total flux cleaned = -0.00515335 Jy
! Component: 2350  -  total flux cleaned = -0.00515353 Jy
! Component: 2400  -  total flux cleaned = -0.00521947 Jy
! Component: 2450  -  total flux cleaned = -0.00521958 Jy
! Component: 2500  -  total flux cleaned = -0.00518712 Jy
! Component: 2550  -  total flux cleaned = -0.0052519 Jy
! Component: 2600  -  total flux cleaned = -0.00528351 Jy
! Component: 2650  -  total flux cleaned = -0.00512399 Jy
! Component: 2700  -  total flux cleaned = -0.00521941 Jy
! Component: 2750  -  total flux cleaned = -0.00521924 Jy
! Component: 2800  -  total flux cleaned = -0.0052508 Jy
! Component: 2850  -  total flux cleaned = -0.00531312 Jy
! Component: 2900  -  total flux cleaned = -0.00543704 Jy
! Component: 2950  -  total flux cleaned = -0.00540602 Jy
! Component: 3000  -  total flux cleaned = -0.00528367 Jy
! Component: 3050  -  total flux cleaned = -0.00534451 Jy
! Component: 3100  -  total flux cleaned = -0.00537456 Jy
! Component: 3150  -  total flux cleaned = -0.00531455 Jy
! Component: 3200  -  total flux cleaned = -0.00537419 Jy
! Component: 3250  -  total flux cleaned = -0.00519595 Jy
! Component: 3300  -  total flux cleaned = -0.00534375 Jy
! Component: 3350  -  total flux cleaned = -0.00537348 Jy
! Component: 3400  -  total flux cleaned = -0.00551974 Jy
! Component: 3450  -  total flux cleaned = -0.00525846 Jy
! Component: 3500  -  total flux cleaned = -0.00546072 Jy
! Component: 3550  -  total flux cleaned = -0.00548952 Jy
! Component: 3600  -  total flux cleaned = -0.0054324 Jy
! Component: 3650  -  total flux cleaned = -0.00543224 Jy
! Component: 3700  -  total flux cleaned = -0.00543223 Jy
! Component: 3750  -  total flux cleaned = -0.00537592 Jy
! Component: 3800  -  total flux cleaned = -0.00543204 Jy
! Component: 3850  -  total flux cleaned = -0.00532085 Jy
! Component: 3900  -  total flux cleaned = -0.00537626 Jy
! Component: 3950  -  total flux cleaned = -0.00532133 Jy
! Component: 4000  -  total flux cleaned = -0.00529386 Jy
! Component: 4050  -  total flux cleaned = -0.00540298 Jy
! Total flux subtracted in 4096 components = -0.00543014 Jy
! Clean residual min=-0.001658 max=0.001588 Jy/beam
! Clean residual mean=-0.000001 rms=0.000434 Jy/beam
! Combined flux in latest and established models = 0.670894 Jy
keep
! Adding 315 model components to the UV plane model.
! The established model now contains 437 components and 0.670894 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv117_uvs/J1332+0200_X_map.fits
! Inverting map 
! Your choice of large map pixels excluded 8.08% of the data.
!  The x-axis pixel size should ideally be below 0.1733 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1877 milli-arcsec
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6524 x 0.7943 at -5.803 degrees (North through East)
! Clean map  min=-0.0023841  max=0.46841 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv117_uvs/J1332+0200_X_map.fits
wmodel /scr/pima/rv117_uvs/J1332+0200_X_map.mod
! Writing 437 model components to file: /scr/pima/rv117_uvs/J1332+0200_X_map.mod
wobs   /scr/pima/rv117_uvs/J1332+0200_X_uvs.fits
! Writing UV FITS file: /scr/pima/rv117_uvs/J1332+0200_X_uvs.fits
wwins  /scr/pima/rv117_uvs/J1332+0200_X_map.win
! wwins: Wrote 14 windows to /scr/pima/rv117_uvs/J1332+0200_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.468414 
invert
! Inverting map 
! Your choice of large map pixels excluded 8.08% of the data.
!  The x-axis pixel size should ideally be below 0.1733 milli-arcsec
!  The y-axis pixel size should ideally be below 0.1877 milli-arcsec
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000433849 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.277863 0.277863 0.555725 1.11145 2.2229 4.4458 8.8916 17.7832 35.5664 71.1328
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0013 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.468 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1079.67 
quit
! Quitting program
! Log file /scr/pima/rv117_uvs/J1332+0200_X_dfm.log closed on Sat Dec  9 23:44:16 2017