! Started logfile: /scr/pima/rv117_uvs/J1332+0200_S_dfm.log on Sat Dec 9 23:44:33 2017 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23275 obs /scr/pima/rv117_uvs/J1332+0200_S_uva.fits ! Reading UV FITS file: /scr/pima/rv117_uvs/J1332+0200_S_uva.fits ! AN table 1: 133 integrations on 36 of 36 possible baselines. ! AN table 2: 7 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.280815 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1332+0200 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23275e+09 8e+06 1 8e+06 ! 02 2 2.26275e+09 8e+06 1 8e+06 ! 03 3 2.35275e+09 8e+06 1 8e+06 ! 04 4 2.37275e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 74 lines of history. ! ! Reading 5732 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1332+0200_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 660 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 660 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 660 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 660 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.043283Jy sigma=12.230975 ! Fit after self-cal, rms=0.765343Jy sigma=8.948511 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.168 mas, bmaj=2.631 mas, bpa=29.62 degrees ! Estimated noise=1.12813 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.188555 Jy ! Component: 100 - total flux cleaned = 0.249672 Jy ! Total flux subtracted in 100 components = 0.249672 Jy ! Clean residual min=-0.010688 max=0.026791 Jy/beam ! Clean residual mean=0.000005 rms=0.002316 Jy/beam ! Combined flux in latest and established models = 0.249672 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.249672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123894Jy sigma=1.071166 ! Fit after self-cal, rms=0.123402Jy sigma=1.067993 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0300429 Jy ! Component: 100 - total flux cleaned = 0.0464506 Jy ! Total flux subtracted in 100 components = 0.0464506 Jy ! Clean residual min=-0.006809 max=0.012646 Jy/beam ! Clean residual mean=0.000001 rms=0.001447 Jy/beam ! Combined flux in latest and established models = 0.296123 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 19 components and 0.296123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113884Jy sigma=0.909935 ! Fit after self-cal, rms=0.113452Jy sigma=0.907204 ! Inverting map ! Added new window around map position (-3.5, 0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129436 Jy ! Component: 100 - total flux cleaned = 0.0212288 Jy ! Total flux subtracted in 100 components = 0.0212288 Jy ! Clean residual min=-0.005821 max=0.006119 Jy/beam ! Clean residual mean=-0.000001 rms=0.001181 Jy/beam ! Combined flux in latest and established models = 0.317352 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 33 components and 0.317352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111359Jy sigma=0.874325 ! Fit after self-cal, rms=0.111182Jy sigma=0.872636 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.992 mas, bmaj=2.529 mas, bpa=57.96 degrees ! Estimated noise=0.921591 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00882901 Jy ! Component: 100 - total flux cleaned = 0.0141623 Jy ! Component: 150 - total flux cleaned = 0.0176074 Jy ! Component: 200 - total flux cleaned = 0.019889 Jy ! Total flux subtracted in 200 components = 0.019889 Jy ! Clean residual min=-0.004541 max=0.004558 Jy/beam ! Clean residual mean=0.000000 rms=0.000977 Jy/beam ! Combined flux in latest and established models = 0.337241 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 45 components and 0.337241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110165Jy sigma=0.860838 ! Fit after self-cal, rms=0.110036Jy sigma=0.859943 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.992 x 2.529 at 57.96 degrees (North through East) ! Clean map min=-0.0041162 max=0.23087 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 147 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.95 HH 1.09 HN 1.04 LA 1.06 ! NL 1.00 NY 0.90 ON 0.97 SC 1.03 ! WZ 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.93 HN 1.04 KP 1.02 ! LA 1.00 MK 0.96 NL 1.03 OV 0.98 ! PT 1.01 SC 0.93 ! ! ! Correcting IF 2. ! A total of 147 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 HH 1.01 HN 1.03 LA 0.99 ! NL 1.00 NY 0.95 ON 0.99 SC 0.98 ! WZ 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.94 HN 1.07 KP 1.05 ! LA 0.95 MK 0.99 NL 0.98 OV 1.04 ! PT 1.03 SC 1.04 ! ! ! Correcting IF 3. ! A total of 147 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 HH 0.96 HN 1.02 LA 1.07 ! NL 1.00 NY 0.98 ON 1.00 SC 0.99 ! WZ 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.00 HN 1.01 KP 1.01 ! LA 0.98 MK 0.99 NL 0.99 OV 1.04 ! PT 1.03 SC 0.98 ! ! ! Correcting IF 4. ! A total of 147 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.05 HH 1.02 HN 1.00 LA 1.06 ! NL 1.00 NY 0.99 ON 1.00 SC 0.99 ! WZ 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.97 HN 1.01 KP 0.99 ! LA 0.99 MK 1.01 NL 1.03 OV 0.99 ! PT 0.99 SC 0.97 ! ! ! Fit before self-cal, rms=0.110036Jy sigma=0.859943 ! Fit after self-cal, rms=0.102238Jy sigma=0.853252 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.061 mas, bmaj=2.636 mas, bpa=43.09 degrees ! Estimated noise=0.935501 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109861 Jy ! Component: 100 - total flux cleaned = 0.00113516 Jy ! Component: 150 - total flux cleaned = 0.00121163 Jy ! Component: 200 - total flux cleaned = 0.00127951 Jy ! Total flux subtracted in 200 components = 0.00127951 Jy ! Clean residual min=-0.003813 max=0.003789 Jy/beam ! Clean residual mean=0.000003 rms=0.000841 Jy/beam ! Combined flux in latest and established models = 0.33852 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 54 components and 0.33852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102185Jy sigma=0.852594 ! Fit after self-cal, rms=0.102283Jy sigma=0.852335 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102283Jy sigma=0.852335 ! Fit after self-cal, rms=0.103275Jy sigma=0.846926 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.068 mas, bmaj=2.636 mas, bpa=43.44 degrees ! Estimated noise=0.938627 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.01598e-05 Jy ! Component: 100 - total flux cleaned = 0.000339998 Jy ! Component: 150 - total flux cleaned = 0.000435339 Jy ! Component: 200 - total flux cleaned = 0.000464001 Jy ! Total flux subtracted in 200 components = 0.000464001 Jy ! Clean residual min=-0.003509 max=0.003692 Jy/beam ! Clean residual mean=0.000003 rms=0.000759 Jy/beam ! Combined flux in latest and established models = 0.338984 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 61 components and 0.338984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103249Jy sigma=0.846560 ! Fit after self-cal, rms=0.103275Jy sigma=0.846426 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (42, -25.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00229347 Jy ! Component: 100 - total flux cleaned = 0.00246284 Jy ! Component: 150 - total flux cleaned = 0.00275768 Jy ! Component: 200 - total flux cleaned = 0.00297357 Jy ! Total flux subtracted in 200 components = 0.00297357 Jy ! Clean residual min=-0.003471 max=0.003122 Jy/beam ! Clean residual mean=0.000002 rms=0.000729 Jy/beam ! Combined flux in latest and established models = 0.341958 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 75 components and 0.341958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103148Jy sigma=0.845212 ! Fit after self-cal, rms=0.103129Jy sigma=0.845065 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103129Jy sigma=0.845065 ! Fit after self-cal, rms=0.103406Jy sigma=0.840527 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.07 mas, bmaj=2.638 mas, bpa=43.67 degrees ! Estimated noise=0.941148 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132131 Jy ! Component: 100 - total flux cleaned = 0.0014999 Jy ! Component: 150 - total flux cleaned = 0.00161708 Jy ! Component: 200 - total flux cleaned = 0.00172255 Jy ! Total flux subtracted in 200 components = 0.00172255 Jy ! Clean residual min=-0.003412 max=0.002999 Jy/beam ! Clean residual mean=0.000001 rms=0.000686 Jy/beam ! Combined flux in latest and established models = 0.34368 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 81 components and 0.34368 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103356Jy sigma=0.840182 ! Fit after self-cal, rms=0.103371Jy sigma=0.840105 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000298524 Jy ! Component: 100 - total flux cleaned = 0.000429641 Jy ! Component: 150 - total flux cleaned = 0.000519547 Jy ! Component: 200 - total flux cleaned = 0.000603826 Jy ! Total flux subtracted in 200 components = 0.000603826 Jy ! Clean residual min=-0.003370 max=0.003006 Jy/beam ! Clean residual mean=0.000001 rms=0.000682 Jy/beam ! Combined flux in latest and established models = 0.344284 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 82 components and 0.344284 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103349Jy sigma=0.839880 ! Fit after self-cal, rms=0.103347Jy sigma=0.839848 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103347Jy sigma=0.839848 ! Fit after self-cal, rms=0.103534Jy sigma=0.839791 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.031 mas, bmaj=9.609 mas, bpa=-19.27 degrees ! Estimated noise=1.44544 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00163531 Jy ! Component: 100 - total flux cleaned = 0.00186489 Jy ! Component: 150 - total flux cleaned = 0.00206889 Jy ! Component: 200 - total flux cleaned = 0.00219862 Jy ! Total flux subtracted in 200 components = 0.00219862 Jy ! Clean residual min=-0.003509 max=0.002936 Jy/beam ! Clean residual mean=0.000005 rms=0.000899 Jy/beam ! Combined flux in latest and established models = 0.346483 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 84 components and 0.346483 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103547Jy sigma=0.840062 ! Fit after self-cal, rms=0.103533Jy sigma=0.839977 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00019479 Jy ! Component: 100 - total flux cleaned = 0.000248088 Jy ! Component: 150 - total flux cleaned = 0.000336328 Jy ! Component: 200 - total flux cleaned = 0.000376846 Jy ! Total flux subtracted in 200 components = 0.000376846 Jy ! Clean residual min=-0.003464 max=0.002889 Jy/beam ! Clean residual mean=0.000005 rms=0.000895 Jy/beam ! Combined flux in latest and established models = 0.34686 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 85 components and 0.34686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103540Jy sigma=0.840116 ! Fit after self-cal, rms=0.103533Jy sigma=0.840085 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.069 mas, bmaj=2.638 mas, bpa=43.72 degrees ! Estimated noise=0.942199 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.069 x 2.638 at 43.72 degrees (North through East) ! Clean map min=-0.0030385 max=0.22911 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.17 mas, bmaj=2.796 mas, bpa=24.74 degrees ! Estimated noise=1.14537 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.188215 Jy ! Component: 100 - total flux cleaned = 0.250704 Jy ! Component: 150 - total flux cleaned = 0.281341 Jy ! Component: 200 - total flux cleaned = 0.299473 Jy ! Total flux subtracted in 200 components = 0.299473 Jy ! Clean residual min=-0.005074 max=0.009571 Jy/beam ! Clean residual mean=0.000002 rms=0.001292 Jy/beam ! Combined flux in latest and established models = 0.299473 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.299473 Jy ! Inverting map and beam ! Estimated beam: bmin=2.069 mas, bmaj=2.638 mas, bpa=43.72 degrees ! Estimated noise=0.942199 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0152301 Jy ! Component: 100 - total flux cleaned = 0.0243982 Jy ! Component: 150 - total flux cleaned = 0.0304027 Jy ! Component: 200 - total flux cleaned = 0.0347644 Jy ! Total flux subtracted in 200 components = 0.0347644 Jy ! Clean residual min=-0.003643 max=0.003390 Jy/beam ! Clean residual mean=0.000005 rms=0.000757 Jy/beam ! Combined flux in latest and established models = 0.334237 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 43 components and 0.334237 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.031 mas, bmaj=9.609 mas, bpa=-19.27 degrees ! Estimated noise=1.44544 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00534623 Jy ! Component: 100 - total flux cleaned = 0.00771349 Jy ! Component: 150 - total flux cleaned = 0.00924213 Jy ! Component: 200 - total flux cleaned = 0.010255 Jy ! Total flux subtracted in 200 components = 0.010255 Jy ! Clean residual min=-0.003512 max=0.002948 Jy/beam ! Clean residual mean=0.000006 rms=0.000907 Jy/beam ! Combined flux in latest and established models = 0.344492 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000675875 Jy ! Component: 100 - total flux cleaned = 0.00111359 Jy ! Component: 150 - total flux cleaned = 0.00120005 Jy ! Component: 200 - total flux cleaned = 0.00126787 Jy ! Total flux subtracted in 200 components = 0.00126787 Jy ! Clean residual min=-0.003465 max=0.002887 Jy/beam ! Clean residual mean=0.000005 rms=0.000899 Jy/beam ! Combined flux in latest and established models = 0.34576 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 74 components and 0.34576 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.069 mas, bmaj=2.638 mas, bpa=43.72 degrees ! Estimated noise=0.942199 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000930123 Jy ! Component: 100 - total flux cleaned = -0.00148416 Jy ! Component: 150 - total flux cleaned = -0.00154997 Jy ! Component: 200 - total flux cleaned = -0.00139535 Jy ! Total flux subtracted in 200 components = -0.00139535 Jy ! Clean residual min=-0.003383 max=0.002932 Jy/beam ! Clean residual mean=0.000002 rms=0.000692 Jy/beam ! Combined flux in latest and established models = 0.344365 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 85 components and 0.344365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103542Jy sigma=0.840506 ! Fit after self-cal, rms=0.103526Jy sigma=0.840234 wmodel J1332+0200_S_map.mod ! Writing 85 model components to file: J1332+0200_S_map.mod wobs J1332+0200_S_uvs.fits ! Writing UV FITS file: J1332+0200_S_uvs.fits wwins J1332+0200_S_map.win ! wwins: Wrote 3 windows to J1332+0200_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000677273 Jy ! Component: 100 - total flux cleaned = -0.000784944 Jy ! Component: 150 - total flux cleaned = -0.00078362 Jy ! Component: 200 - total flux cleaned = -0.000686266 Jy ! Component: 250 - total flux cleaned = -0.000638639 Jy ! Component: 300 - total flux cleaned = -0.00059205 Jy ! Component: 350 - total flux cleaned = -0.000546685 Jy ! Component: 400 - total flux cleaned = -0.000635526 Jy ! Component: 450 - total flux cleaned = -0.00059124 Jy ! Component: 500 - total flux cleaned = -0.000506145 Jy ! Component: 550 - total flux cleaned = -0.000590941 Jy ! Component: 600 - total flux cleaned = -0.000549275 Jy ! Component: 650 - total flux cleaned = -0.000590125 Jy ! Component: 700 - total flux cleaned = -0.000549638 Jy ! Component: 750 - total flux cleaned = -0.000509168 Jy ! Component: 800 - total flux cleaned = -0.000509235 Jy ! Component: 850 - total flux cleaned = -0.000470542 Jy ! Component: 900 - total flux cleaned = -0.00047096 Jy ! Component: 950 - total flux cleaned = -0.000395461 Jy ! Component: 1000 - total flux cleaned = -0.000395969 Jy ! Component: 1050 - total flux cleaned = -0.000433749 Jy ! Component: 1100 - total flux cleaned = -0.00028553 Jy ! Component: 1150 - total flux cleaned = -0.000286109 Jy ! Component: 1200 - total flux cleaned = -0.00043072 Jy ! Component: 1250 - total flux cleaned = -0.000322719 Jy ! Component: 1300 - total flux cleaned = -0.000322526 Jy ! Component: 1350 - total flux cleaned = -0.000216283 Jy ! Component: 1400 - total flux cleaned = -0.000251107 Jy ! Component: 1450 - total flux cleaned = -0.000251119 Jy ! Component: 1500 - total flux cleaned = -0.000250722 Jy ! Component: 1550 - total flux cleaned = -0.000182358 Jy ! Component: 1600 - total flux cleaned = -1.42555e-05 Jy ! Component: 1650 - total flux cleaned = 8.60285e-05 Jy ! Component: 1700 - total flux cleaned = 0.000119595 Jy ! Component: 1750 - total flux cleaned = 0.000152339 Jy ! Component: 1800 - total flux cleaned = 0.000250319 Jy ! Component: 1850 - total flux cleaned = 0.000477176 Jy ! Component: 1900 - total flux cleaned = 0.000412443 Jy ! Component: 1950 - total flux cleaned = 0.000540319 Jy ! Component: 2000 - total flux cleaned = 0.000698801 Jy ! Component: 2050 - total flux cleaned = 0.000604497 Jy ! Component: 2100 - total flux cleaned = 0.000854365 Jy ! Component: 2150 - total flux cleaned = 0.00088528 Jy ! Component: 2200 - total flux cleaned = 0.00100858 Jy ! Component: 2250 - total flux cleaned = 0.00100837 Jy ! Component: 2300 - total flux cleaned = 0.0011602 Jy ! Component: 2350 - total flux cleaned = 0.00119027 Jy ! Component: 2400 - total flux cleaned = 0.00112973 Jy ! Component: 2450 - total flux cleaned = 0.00127904 Jy ! Component: 2500 - total flux cleaned = 0.00130874 Jy ! Component: 2550 - total flux cleaned = 0.00139703 Jy ! Component: 2600 - total flux cleaned = 0.00148445 Jy ! Component: 2650 - total flux cleaned = 0.00157132 Jy ! Component: 2700 - total flux cleaned = 0.0014846 Jy ! Component: 2750 - total flux cleaned = 0.00148465 Jy ! Component: 2800 - total flux cleaned = 0.00162739 Jy ! Component: 2850 - total flux cleaned = 0.00159923 Jy ! Component: 2900 - total flux cleaned = 0.0018238 Jy ! Component: 2950 - total flux cleaned = 0.00174004 Jy ! Component: 3000 - total flux cleaned = 0.00168465 Jy ! Component: 3050 - total flux cleaned = 0.00187798 Jy ! Component: 3100 - total flux cleaned = 0.00193291 Jy ! Component: 3150 - total flux cleaned = 0.00193296 Jy ! Component: 3200 - total flux cleaned = 0.00204076 Jy ! Component: 3250 - total flux cleaned = 0.00209476 Jy ! Component: 3300 - total flux cleaned = 0.0020679 Jy ! Component: 3350 - total flux cleaned = 0.00209448 Jy ! Component: 3400 - total flux cleaned = 0.00204174 Jy ! Component: 3450 - total flux cleaned = 0.00214659 Jy ! Component: 3500 - total flux cleaned = 0.00212063 Jy ! Component: 3550 - total flux cleaned = 0.00214658 Jy ! Component: 3600 - total flux cleaned = 0.00219823 Jy ! Component: 3650 - total flux cleaned = 0.0022238 Jy ! Component: 3700 - total flux cleaned = 0.00217279 Jy ! Component: 3750 - total flux cleaned = 0.00219839 Jy ! Component: 3800 - total flux cleaned = 0.0021985 Jy ! Component: 3850 - total flux cleaned = 0.00222358 Jy ! Component: 3900 - total flux cleaned = 0.0022735 Jy ! Component: 3950 - total flux cleaned = 0.00229816 Jy ! Component: 4000 - total flux cleaned = 0.00217494 Jy ! Component: 4050 - total flux cleaned = 0.00217489 Jy ! Total flux subtracted in 4096 components = 0.00197936 Jy ! Clean residual min=-0.001355 max=0.001470 Jy/beam ! Clean residual mean=0.000001 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.346344 Jy keep ! Adding 297 model components to the UV plane model. ! The established model now contains 382 components and 0.346344 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv117_uvs/J1332+0200_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.069 x 2.638 at 43.72 degrees (North through East) ! Clean map min=-0.0022465 max=0.23073 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv117_uvs/J1332+0200_S_map.fits wmodel /scr/pima/rv117_uvs/J1332+0200_S_map.mod ! Writing 382 model components to file: /scr/pima/rv117_uvs/J1332+0200_S_map.mod wobs /scr/pima/rv117_uvs/J1332+0200_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv117_uvs/J1332+0200_S_uvs.fits wwins /scr/pima/rv117_uvs/J1332+0200_S_map.win ! wwins: Wrote 4 windows to /scr/pima/rv117_uvs/J1332+0200_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.230733 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000403891 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.525142 0.525142 1.05028 2.10057 4.20113 8.40227 16.8045 33.6091 67.2181 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.23 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 571.274 quit ! Quitting program ! Log file /scr/pima/rv117_uvs/J1332+0200_S_dfm.log closed on Sat Dec 9 23:44:37 2017