! Started logfile: /scr/pima/rv117_uvs/J1324-1049_X_dfm.log on Sat Dec 9 23:44:07 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv117_uvs/J1324-1049_X_uva.fits ! Reading UV FITS file: /scr/pima/rv117_uvs/J1324-1049_X_uva.fits ! AN table 1: 44 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.994444 visibilities/baseline/integration-bin. ! Found source: J1324-1049 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 74 lines of history. ! ! Reading 7876 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1324-1049_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.092282Jy sigma=19.919421 ! Fit after self-cal, rms=0.560717Jy sigma=10.079552 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6905 mas, bmaj=1.709 mas, bpa=-3.683 degrees ! Estimated noise=0.791636 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.333519 Jy ! Component: 100 - total flux cleaned = 0.417186 Jy ! Total flux subtracted in 100 components = 0.417186 Jy ! Clean residual min=-0.008833 max=0.033438 Jy/beam ! Clean residual mean=0.000016 rms=0.002390 Jy/beam ! Combined flux in latest and established models = 0.417186 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.417186 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076575Jy sigma=1.332772 ! Fit after self-cal, rms=0.076573Jy sigma=1.332592 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.033698 Jy ! Component: 100 - total flux cleaned = 0.0483022 Jy ! Total flux subtracted in 100 components = 0.0483022 Jy ! Clean residual min=-0.004383 max=0.006401 Jy/beam ! Clean residual mean=0.000005 rms=0.000997 Jy/beam ! Combined flux in latest and established models = 0.465488 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 8 components and 0.465488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058936Jy sigma=0.980179 ! Fit after self-cal, rms=0.058900Jy sigma=0.979249 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00702449 Jy ! Component: 100 - total flux cleaned = 0.0110055 Jy ! Total flux subtracted in 100 components = 0.0110055 Jy ! Clean residual min=-0.003916 max=0.004045 Jy/beam ! Clean residual mean=0.000002 rms=0.000876 Jy/beam ! Combined flux in latest and established models = 0.476494 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 13 components and 0.476494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057804Jy sigma=0.955598 ! Fit after self-cal, rms=0.057802Jy sigma=0.955519 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8796 mas, bmaj=2.063 mas, bpa=-3.007 degrees ! Estimated noise=0.451264 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.2, -0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00407939 Jy ! Component: 100 - total flux cleaned = 0.0050831 Jy ! Component: 150 - total flux cleaned = 0.00548855 Jy ! Component: 200 - total flux cleaned = 0.00565891 Jy ! Total flux subtracted in 200 components = 0.00565891 Jy ! Clean residual min=-0.002464 max=0.002198 Jy/beam ! Clean residual mean=0.000000 rms=0.000556 Jy/beam ! Combined flux in latest and established models = 0.482153 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 28 components and 0.482153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057489Jy sigma=0.949377 ! Fit after self-cal, rms=0.057467Jy sigma=0.949033 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8796 x 2.063 at -3.007 degrees (North through East) ! Clean map min=-0.0022392 max=0.43983 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.01 KP 1.01 ! LA 1.00 MK 1.00 NL 0.98 OV 0.99 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.02 KP 1.00 ! LA 1.00 MK 1.00 NL 0.98 OV 1.00 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 1.02 KP 1.00 ! LA 1.01 MK 0.99 NL 0.99 OV 0.99 ! PT 1.00 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.01 KP 1.00 ! LA 1.00 MK 0.99 NL 0.99 OV 0.99 ! PT 1.00 SC 0.98 ! ! ! Fit before self-cal, rms=0.057467Jy sigma=0.949033 ! Fit after self-cal, rms=0.057036Jy sigma=0.944044 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8789 mas, bmaj=2.06 mas, bpa=-2.971 degrees ! Estimated noise=0.450384 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000521371 Jy ! Component: 100 - total flux cleaned = 0.000318603 Jy ! Component: 150 - total flux cleaned = 0.000214885 Jy ! Component: 200 - total flux cleaned = 0.000182872 Jy ! Total flux subtracted in 200 components = 0.000182872 Jy ! Clean residual min=-0.001993 max=0.002056 Jy/beam ! Clean residual mean=-0.000000 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.482335 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 39 components and 0.482335 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056980Jy sigma=0.943109 ! Fit after self-cal, rms=0.056976Jy sigma=0.943052 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056976Jy sigma=0.943052 ! Fit after self-cal, rms=0.056761Jy sigma=0.939934 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8785 mas, bmaj=2.063 mas, bpa=-2.948 degrees ! Estimated noise=0.450362 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000369492 Jy ! Component: 100 - total flux cleaned = 0.000438842 Jy ! Component: 150 - total flux cleaned = 0.00052985 Jy ! Component: 200 - total flux cleaned = 0.000584712 Jy ! Total flux subtracted in 200 components = 0.000584712 Jy ! Clean residual min=-0.001774 max=0.001831 Jy/beam ! Clean residual mean=-0.000001 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.48292 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 48 components and 0.48292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056725Jy sigma=0.939266 ! Fit after self-cal, rms=0.056723Jy sigma=0.939236 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (48, -14.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000959699 Jy ! Component: 100 - total flux cleaned = 0.00110311 Jy ! Component: 150 - total flux cleaned = 0.0011049 Jy ! Component: 200 - total flux cleaned = 0.00110417 Jy ! Total flux subtracted in 200 components = 0.00110417 Jy ! Clean residual min=-0.001710 max=0.001680 Jy/beam ! Clean residual mean=-0.000000 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.484024 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 66 components and 0.484024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056647Jy sigma=0.937830 ! Fit after self-cal, rms=0.056640Jy sigma=0.937763 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056640Jy sigma=0.937763 ! Fit after self-cal, rms=0.056623Jy sigma=0.937359 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8785 mas, bmaj=2.063 mas, bpa=-2.922 degrees ! Estimated noise=0.450497 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000515496 Jy ! Component: 100 - total flux cleaned = 0.000578453 Jy ! Component: 150 - total flux cleaned = 0.000663526 Jy ! Component: 200 - total flux cleaned = 0.000740343 Jy ! Total flux subtracted in 200 components = 0.000740343 Jy ! Clean residual min=-0.001691 max=0.001574 Jy/beam ! Clean residual mean=0.000000 rms=0.000401 Jy/beam ! Combined flux in latest and established models = 0.484765 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 74 components and 0.484765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056594Jy sigma=0.936836 ! Fit after self-cal, rms=0.056591Jy sigma=0.936819 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000103566 Jy ! Component: 100 - total flux cleaned = 0.000173257 Jy ! Component: 150 - total flux cleaned = 0.000194873 Jy ! Component: 200 - total flux cleaned = 0.000215556 Jy ! Total flux subtracted in 200 components = 0.000215556 Jy ! Clean residual min=-0.001661 max=0.001534 Jy/beam ! Clean residual mean=0.000000 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.48498 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 77 components and 0.48498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056575Jy sigma=0.936534 ! Fit after self-cal, rms=0.056573Jy sigma=0.936527 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056573Jy sigma=0.936527 ! Fit after self-cal, rms=0.056558Jy sigma=0.936214 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.171 mas, bmaj=3.877 mas, bpa=2.064 degrees ! Estimated noise=0.565688 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000284437 Jy ! Component: 100 - total flux cleaned = 0.000383553 Jy ! Component: 150 - total flux cleaned = 0.000411319 Jy ! Component: 200 - total flux cleaned = 0.000447589 Jy ! Total flux subtracted in 200 components = 0.000447589 Jy ! Clean residual min=-0.001833 max=0.001602 Jy/beam ! Clean residual mean=-0.000000 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.485428 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 85 components and 0.485428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056556Jy sigma=0.936204 ! Fit after self-cal, rms=0.056554Jy sigma=0.936192 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.85965e-06 Jy ! Component: 100 - total flux cleaned = 3.20637e-05 Jy ! Component: 150 - total flux cleaned = 4.32291e-05 Jy ! Component: 200 - total flux cleaned = 4.34377e-05 Jy ! Total flux subtracted in 200 components = 4.34377e-05 Jy ! Clean residual min=-0.001814 max=0.001604 Jy/beam ! Clean residual mean=-0.000000 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.485471 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 89 components and 0.485471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056552Jy sigma=0.936163 ! Fit after self-cal, rms=0.056552Jy sigma=0.936155 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8784 mas, bmaj=2.063 mas, bpa=-2.905 degrees ! Estimated noise=0.450584 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8784 x 2.063 at -2.905 degrees (North through East) ! Clean map min=-0.0014393 max=0.43968 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6896 mas, bmaj=1.71 mas, bpa=-3.572 degrees ! Estimated noise=0.789988 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.332807 Jy ! Component: 100 - total flux cleaned = 0.416117 Jy ! Component: 150 - total flux cleaned = 0.449607 Jy ! Component: 200 - total flux cleaned = 0.464465 Jy ! Total flux subtracted in 200 components = 0.464465 Jy ! Clean residual min=-0.004272 max=0.006553 Jy/beam ! Clean residual mean=0.000005 rms=0.000930 Jy/beam ! Combined flux in latest and established models = 0.464465 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.464465 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8784 mas, bmaj=2.063 mas, bpa=-2.905 degrees ! Estimated noise=0.450584 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010099 Jy ! Component: 100 - total flux cleaned = 0.0150477 Jy ! Component: 150 - total flux cleaned = 0.0178226 Jy ! Component: 200 - total flux cleaned = 0.0191357 Jy ! Total flux subtracted in 200 components = 0.0191357 Jy ! Clean residual min=-0.001846 max=0.001709 Jy/beam ! Clean residual mean=0.000001 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.483601 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 25 components and 0.483601 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.171 mas, bmaj=3.877 mas, bpa=2.064 degrees ! Estimated noise=0.565688 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012812 Jy ! Component: 100 - total flux cleaned = 0.00163325 Jy ! Component: 150 - total flux cleaned = 0.00172619 Jy ! Component: 200 - total flux cleaned = 0.0017862 Jy ! Total flux subtracted in 200 components = 0.0017862 Jy ! Clean residual min=-0.001822 max=0.001701 Jy/beam ! Clean residual mean=-0.000000 rms=0.000486 Jy/beam ! Combined flux in latest and established models = 0.485387 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.76042e-07 Jy ! Component: 100 - total flux cleaned = 5.89308e-07 Jy ! Component: 150 - total flux cleaned = -1.51848e-05 Jy ! Component: 200 - total flux cleaned = -2.94817e-05 Jy ! Total flux subtracted in 200 components = -2.94817e-05 Jy ! Clean residual min=-0.001816 max=0.001678 Jy/beam ! Clean residual mean=-0.000000 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.485358 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 45 components and 0.485358 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8784 mas, bmaj=2.063 mas, bpa=-2.905 degrees ! Estimated noise=0.450584 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.45482e-05 Jy ! Component: 100 - total flux cleaned = 7.21174e-06 Jy ! Component: 150 - total flux cleaned = 5.63394e-06 Jy ! Component: 200 - total flux cleaned = 4.32664e-05 Jy ! Total flux subtracted in 200 components = 4.32664e-05 Jy ! Clean residual min=-0.001724 max=0.001701 Jy/beam ! Clean residual mean=0.000000 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.485401 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 55 components and 0.485401 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056637Jy sigma=0.937369 ! Fit after self-cal, rms=0.056629Jy sigma=0.937287 wmodel J1324-1049_X_map.mod ! Writing 55 model components to file: J1324-1049_X_map.mod wobs J1324-1049_X_uvs.fits ! Writing UV FITS file: J1324-1049_X_uvs.fits wwins J1324-1049_X_map.win ! wwins: Wrote 3 windows to J1324-1049_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -9.15383e-05 Jy ! Component: 100 - total flux cleaned = -8.99915e-05 Jy ! Component: 150 - total flux cleaned = -6.17765e-05 Jy ! Component: 200 - total flux cleaned = -0.000116728 Jy ! Component: 250 - total flux cleaned = -3.61894e-05 Jy ! Component: 300 - total flux cleaned = 9.4134e-05 Jy ! Component: 350 - total flux cleaned = 0.000221387 Jy ! Component: 400 - total flux cleaned = 0.000221801 Jy ! Component: 450 - total flux cleaned = 0.000393907 Jy ! Component: 500 - total flux cleaned = 0.000442262 Jy ! Component: 550 - total flux cleaned = 0.000513812 Jy ! Component: 600 - total flux cleaned = 0.000583941 Jy ! Component: 650 - total flux cleaned = 0.000606871 Jy ! Component: 700 - total flux cleaned = 0.000652406 Jy ! Component: 750 - total flux cleaned = 0.000652373 Jy ! Component: 800 - total flux cleaned = 0.000608396 Jy ! Component: 850 - total flux cleaned = 0.000652538 Jy ! Component: 900 - total flux cleaned = 0.000739007 Jy ! Component: 950 - total flux cleaned = 0.000781589 Jy ! Component: 1000 - total flux cleaned = 0.000760458 Jy ! Component: 1050 - total flux cleaned = 0.000885077 Jy ! Component: 1100 - total flux cleaned = 0.000884733 Jy ! Component: 1150 - total flux cleaned = 0.000864532 Jy ! Component: 1200 - total flux cleaned = 0.000905216 Jy ! Component: 1250 - total flux cleaned = 0.000964893 Jy ! Component: 1300 - total flux cleaned = 0.00106323 Jy ! Component: 1350 - total flux cleaned = 0.0010436 Jy ! Component: 1400 - total flux cleaned = 0.00110163 Jy ! Component: 1450 - total flux cleaned = 0.00108257 Jy ! Component: 1500 - total flux cleaned = 0.00110189 Jy ! Component: 1550 - total flux cleaned = 0.0011207 Jy ! Component: 1600 - total flux cleaned = 0.00112067 Jy ! Component: 1650 - total flux cleaned = 0.00104703 Jy ! Component: 1700 - total flux cleaned = 0.00102906 Jy ! Component: 1750 - total flux cleaned = 0.00106541 Jy ! Component: 1800 - total flux cleaned = 0.00110119 Jy ! Component: 1850 - total flux cleaned = 0.00115421 Jy ! Component: 1900 - total flux cleaned = 0.00106592 Jy ! Component: 1950 - total flux cleaned = 0.00110114 Jy ! Component: 2000 - total flux cleaned = 0.001205 Jy ! Component: 2050 - total flux cleaned = 0.00108451 Jy ! Component: 2100 - total flux cleaned = 0.00108459 Jy ! Component: 2150 - total flux cleaned = 0.00113577 Jy ! Component: 2200 - total flux cleaned = 0.00113561 Jy ! Component: 2250 - total flux cleaned = 0.00115219 Jy ! Component: 2300 - total flux cleaned = 0.00116888 Jy ! Component: 2350 - total flux cleaned = 0.00115249 Jy ! Component: 2400 - total flux cleaned = 0.0012178 Jy ! Component: 2450 - total flux cleaned = 0.00115306 Jy ! Component: 2500 - total flux cleaned = 0.00116928 Jy ! Component: 2550 - total flux cleaned = 0.00116914 Jy ! Component: 2600 - total flux cleaned = 0.00123287 Jy ! Component: 2650 - total flux cleaned = 0.00123291 Jy ! Component: 2700 - total flux cleaned = 0.00121726 Jy ! Component: 2750 - total flux cleaned = 0.00124834 Jy ! Component: 2800 - total flux cleaned = 0.00129486 Jy ! Component: 2850 - total flux cleaned = 0.00124876 Jy ! Component: 2900 - total flux cleaned = 0.00124888 Jy ! Component: 2950 - total flux cleaned = 0.00124873 Jy ! Component: 3000 - total flux cleaned = 0.00130905 Jy ! Component: 3050 - total flux cleaned = 0.00127898 Jy ! Component: 3100 - total flux cleaned = 0.00130876 Jy ! Component: 3150 - total flux cleaned = 0.00129401 Jy ! Component: 3200 - total flux cleaned = 0.001294 Jy ! Component: 3250 - total flux cleaned = 0.00127933 Jy ! Component: 3300 - total flux cleaned = 0.00127933 Jy ! Component: 3350 - total flux cleaned = 0.00129362 Jy ! Component: 3400 - total flux cleaned = 0.00129362 Jy ! Component: 3450 - total flux cleaned = 0.00129349 Jy ! Component: 3500 - total flux cleaned = 0.00126513 Jy ! Component: 3550 - total flux cleaned = 0.00129337 Jy ! Component: 3600 - total flux cleaned = 0.00129338 Jy ! Component: 3650 - total flux cleaned = 0.00130733 Jy ! Component: 3700 - total flux cleaned = 0.00134902 Jy ! Component: 3750 - total flux cleaned = 0.00133516 Jy ! Component: 3800 - total flux cleaned = 0.00130766 Jy ! Component: 3850 - total flux cleaned = 0.00132132 Jy ! Component: 3900 - total flux cleaned = 0.00136222 Jy ! Component: 3950 - total flux cleaned = 0.0013758 Jy ! Component: 4000 - total flux cleaned = 0.0013354 Jy ! Component: 4050 - total flux cleaned = 0.00136234 Jy ! Total flux subtracted in 4096 components = 0.0014024 Jy ! Clean residual min=-0.000848 max=0.000811 Jy/beam ! Clean residual mean=0.000002 rms=0.000228 Jy/beam ! Combined flux in latest and established models = 0.486803 Jy keep ! Adding 305 model components to the UV plane model. ! The established model now contains 360 components and 0.486803 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv117_uvs/J1324-1049_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8784 x 2.063 at -2.905 degrees (North through East) ! Clean map min=-0.0014056 max=0.43932 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv117_uvs/J1324-1049_X_map.fits wmodel /scr/pima/rv117_uvs/J1324-1049_X_map.mod ! Writing 360 model components to file: /scr/pima/rv117_uvs/J1324-1049_X_map.mod wobs /scr/pima/rv117_uvs/J1324-1049_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv117_uvs/J1324-1049_X_uvs.fits wwins /scr/pima/rv117_uvs/J1324-1049_X_map.win ! wwins: Wrote 4 windows to /scr/pima/rv117_uvs/J1324-1049_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.439317 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000227709 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.155497 0.155497 0.310995 0.621989 1.24398 2.48796 4.97591 9.95183 19.9037 39.8073 79.6146 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.439 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1929.29 quit ! Quitting program ! Log file /scr/pima/rv117_uvs/J1324-1049_X_dfm.log closed on Sat Dec 9 23:44:11 2017