! Started logfile: /scr/pima/rv117_uvs/J1322-0937_X_dfm.log on Sat Dec 9 23:44:03 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv117_uvs/J1322-0937_X_uva.fits ! Reading UV FITS file: /scr/pima/rv117_uvs/J1322-0937_X_uva.fits ! AN table 1: 44 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.997475 visibilities/baseline/integration-bin. ! Found source: J1322-0937 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 74 lines of history. ! ! Reading 7900 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1322-0937_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.048772Jy sigma=19.794111 ! Fit after self-cal, rms=0.685489Jy sigma=12.776330 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.702 mas, bmaj=1.732 mas, bpa=-4.862 degrees ! Estimated noise=0.716087 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.240052 Jy ! Component: 100 - total flux cleaned = 0.293847 Jy ! Total flux subtracted in 100 components = 0.293847 Jy ! Clean residual min=-0.005773 max=0.019250 Jy/beam ! Clean residual mean=0.000013 rms=0.001761 Jy/beam ! Combined flux in latest and established models = 0.293847 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.293847 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066879Jy sigma=1.200735 ! Fit after self-cal, rms=0.066883Jy sigma=1.200407 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0214513 Jy ! Component: 100 - total flux cleaned = 0.0327799 Jy ! Total flux subtracted in 100 components = 0.0327799 Jy ! Clean residual min=-0.003849 max=0.006281 Jy/beam ! Clean residual mean=0.000006 rms=0.000995 Jy/beam ! Combined flux in latest and established models = 0.326627 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 9 components and 0.326627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057891Jy sigma=0.994772 ! Fit after self-cal, rms=0.057827Jy sigma=0.993508 ! Inverting map ! Added new window around map position (-1.2, -0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00746782 Jy ! Component: 100 - total flux cleaned = 0.0121399 Jy ! Total flux subtracted in 100 components = 0.0121399 Jy ! Clean residual min=-0.003289 max=0.004129 Jy/beam ! Clean residual mean=0.000004 rms=0.000830 Jy/beam ! Combined flux in latest and established models = 0.338767 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 18 components and 0.338767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056577Jy sigma=0.962979 ! Fit after self-cal, rms=0.056527Jy sigma=0.961885 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8818 mas, bmaj=2.07 mas, bpa=-3.311 degrees ! Estimated noise=0.434497 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0049879 Jy ! Component: 100 - total flux cleaned = 0.00783366 Jy ! Component: 150 - total flux cleaned = 0.00960515 Jy ! Component: 200 - total flux cleaned = 0.0107742 Jy ! Total flux subtracted in 200 components = 0.0107742 Jy ! Clean residual min=-0.001895 max=0.002062 Jy/beam ! Clean residual mean=0.000003 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.349541 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 34 components and 0.349541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056118Jy sigma=0.951683 ! Fit after self-cal, rms=0.056105Jy sigma=0.951341 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8818 x 2.07 at -3.311 degrees (North through East) ! Clean map min=-0.0017535 max=0.31599 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 1.01 KP 1.01 ! LA 0.99 MK 1.00 NL 0.99 OV 0.99 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.02 KP 1.00 ! LA 0.99 MK 1.00 NL 0.98 OV 0.99 ! PT 1.00 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 1.03 KP 1.01 ! LA 1.02 MK 1.00 NL 0.99 OV 1.00 ! PT 0.99 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.01 HN 1.01 KP 1.00 ! LA 1.00 MK 0.99 NL 0.99 OV 1.00 ! PT 0.99 SC 0.99 ! ! ! Fit before self-cal, rms=0.056105Jy sigma=0.951341 ! Fit after self-cal, rms=0.055955Jy sigma=0.947240 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8816 mas, bmaj=2.07 mas, bpa=-3.27 degrees ! Estimated noise=0.433967 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000527375 Jy ! Component: 100 - total flux cleaned = 0.000555175 Jy ! Component: 150 - total flux cleaned = 0.000531496 Jy ! Component: 200 - total flux cleaned = 0.000490747 Jy ! Total flux subtracted in 200 components = 0.000490747 Jy ! Clean residual min=-0.001740 max=0.001692 Jy/beam ! Clean residual mean=0.000002 rms=0.000427 Jy/beam ! Combined flux in latest and established models = 0.350032 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 41 components and 0.350032 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055926Jy sigma=0.946823 ! Fit after self-cal, rms=0.055925Jy sigma=0.946782 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055925Jy sigma=0.946782 ! Fit after self-cal, rms=0.055857Jy sigma=0.944428 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8811 mas, bmaj=2.073 mas, bpa=-3.298 degrees ! Estimated noise=0.434046 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000412524 Jy ! Component: 100 - total flux cleaned = 0.000374012 Jy ! Component: 150 - total flux cleaned = 0.000372478 Jy ! Component: 200 - total flux cleaned = 0.000373126 Jy ! Total flux subtracted in 200 components = 0.000373126 Jy ! Clean residual min=-0.001722 max=0.001537 Jy/beam ! Clean residual mean=0.000000 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.350405 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 47 components and 0.350405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055843Jy sigma=0.944186 ! Fit after self-cal, rms=0.055843Jy sigma=0.944159 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.45115e-05 Jy ! Component: 100 - total flux cleaned = -1.07235e-05 Jy ! Component: 150 - total flux cleaned = -4.47633e-05 Jy ! Component: 200 - total flux cleaned = -5.5733e-05 Jy ! Total flux subtracted in 200 components = -5.5733e-05 Jy ! Clean residual min=-0.001719 max=0.001533 Jy/beam ! Clean residual mean=0.000000 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.350349 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 48 components and 0.350349 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055837Jy sigma=0.944056 ! Fit after self-cal, rms=0.055836Jy sigma=0.944043 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055836Jy sigma=0.944043 ! Fit after self-cal, rms=0.055842Jy sigma=0.944019 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8809 mas, bmaj=2.073 mas, bpa=-3.283 degrees ! Estimated noise=0.434202 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000281828 Jy ! Component: 100 - total flux cleaned = 0.000304325 Jy ! Component: 150 - total flux cleaned = 0.0002841 Jy ! Component: 200 - total flux cleaned = 0.000275129 Jy ! Total flux subtracted in 200 components = 0.000275129 Jy ! Clean residual min=-0.001702 max=0.001535 Jy/beam ! Clean residual mean=0.000000 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.350624 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 53 components and 0.350624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055837Jy sigma=0.943935 ! Fit after self-cal, rms=0.055836Jy sigma=0.943925 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.55236e-05 Jy ! Component: 100 - total flux cleaned = 6.46705e-06 Jy ! Component: 150 - total flux cleaned = -2.34415e-06 Jy ! Component: 200 - total flux cleaned = -1.90479e-05 Jy ! Total flux subtracted in 200 components = -1.90479e-05 Jy ! Clean residual min=-0.001692 max=0.001534 Jy/beam ! Clean residual mean=0.000000 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.350605 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 56 components and 0.350605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055833Jy sigma=0.943871 ! Fit after self-cal, rms=0.055833Jy sigma=0.943865 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055833Jy sigma=0.943865 ! Fit after self-cal, rms=0.055837Jy sigma=0.943855 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.166 mas, bmaj=3.797 mas, bpa=1.06 degrees ! Estimated noise=0.541093 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000471415 Jy ! Component: 100 - total flux cleaned = 0.000589734 Jy ! Component: 150 - total flux cleaned = 0.000614592 Jy ! Component: 200 - total flux cleaned = 0.000637817 Jy ! Total flux subtracted in 200 components = 0.000637817 Jy ! Clean residual min=-0.001491 max=0.001586 Jy/beam ! Clean residual mean=-0.000000 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.351243 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 61 components and 0.351243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055838Jy sigma=0.943870 ! Fit after self-cal, rms=0.055837Jy sigma=0.943857 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.30548e-05 Jy ! Component: 100 - total flux cleaned = 9.5547e-05 Jy ! Component: 150 - total flux cleaned = 0.00010106 Jy ! Component: 200 - total flux cleaned = 0.000106419 Jy ! Total flux subtracted in 200 components = 0.000106419 Jy ! Clean residual min=-0.001488 max=0.001574 Jy/beam ! Clean residual mean=-0.000000 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.351349 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 62 components and 0.351349 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055838Jy sigma=0.943868 ! Fit after self-cal, rms=0.055837Jy sigma=0.943864 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8808 mas, bmaj=2.072 mas, bpa=-3.265 degrees ! Estimated noise=0.434351 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8808 x 2.072 at -3.265 degrees (North through East) ! Clean map min=-0.0015447 max=0.31588 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7011 mas, bmaj=1.735 mas, bpa=-4.812 degrees ! Estimated noise=0.716402 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.240062 Jy ! Component: 100 - total flux cleaned = 0.294373 Jy ! Component: 150 - total flux cleaned = 0.316431 Jy ! Component: 200 - total flux cleaned = 0.328181 Jy ! Total flux subtracted in 200 components = 0.328181 Jy ! Clean residual min=-0.003492 max=0.006010 Jy/beam ! Clean residual mean=0.000004 rms=0.000901 Jy/beam ! Combined flux in latest and established models = 0.328181 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.328181 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8808 mas, bmaj=2.072 mas, bpa=-3.265 degrees ! Estimated noise=0.434351 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101437 Jy ! Component: 100 - total flux cleaned = 0.0151574 Jy ! Component: 150 - total flux cleaned = 0.0180156 Jy ! Component: 200 - total flux cleaned = 0.0198624 Jy ! Total flux subtracted in 200 components = 0.0198624 Jy ! Clean residual min=-0.001793 max=0.001793 Jy/beam ! Clean residual mean=0.000001 rms=0.000408 Jy/beam ! Combined flux in latest and established models = 0.348043 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 36 components and 0.348043 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.166 mas, bmaj=3.797 mas, bpa=1.06 degrees ! Estimated noise=0.541093 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175801 Jy ! Component: 100 - total flux cleaned = 0.00255259 Jy ! Component: 150 - total flux cleaned = 0.00293919 Jy ! Component: 200 - total flux cleaned = 0.00310305 Jy ! Total flux subtracted in 200 components = 0.00310305 Jy ! Clean residual min=-0.001482 max=0.001589 Jy/beam ! Clean residual mean=-0.000000 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.351146 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.01093e-05 Jy ! Component: 100 - total flux cleaned = 5.26706e-05 Jy ! Component: 150 - total flux cleaned = 7.42974e-05 Jy ! Component: 200 - total flux cleaned = 9.48101e-05 Jy ! Total flux subtracted in 200 components = 9.48101e-05 Jy ! Clean residual min=-0.001479 max=0.001585 Jy/beam ! Clean residual mean=-0.000000 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.351241 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 60 components and 0.351241 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8808 mas, bmaj=2.072 mas, bpa=-3.265 degrees ! Estimated noise=0.434351 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00023521 Jy ! Component: 100 - total flux cleaned = -0.000291233 Jy ! Component: 150 - total flux cleaned = -0.000307664 Jy ! Component: 200 - total flux cleaned = -0.000322464 Jy ! Total flux subtracted in 200 components = -0.000322464 Jy ! Clean residual min=-0.001685 max=0.001541 Jy/beam ! Clean residual mean=0.000000 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.350919 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 66 components and 0.350919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055861Jy sigma=0.944165 ! Fit after self-cal, rms=0.055860Jy sigma=0.944128 wmodel J1322-0937_X_map.mod ! Writing 66 model components to file: J1322-0937_X_map.mod wobs J1322-0937_X_uvs.fits ! Writing UV FITS file: J1322-0937_X_uvs.fits wwins J1322-0937_X_map.win ! wwins: Wrote 2 windows to J1322-0937_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000131458 Jy ! Component: 100 - total flux cleaned = -7.4363e-05 Jy ! Component: 150 - total flux cleaned = -0.000155456 Jy ! Component: 200 - total flux cleaned = -0.000233001 Jy ! Component: 250 - total flux cleaned = -0.000435933 Jy ! Component: 300 - total flux cleaned = -0.000634615 Jy ! Component: 350 - total flux cleaned = -0.00090119 Jy ! Component: 400 - total flux cleaned = -0.0011142 Jy ! Component: 450 - total flux cleaned = -0.00134622 Jy ! Component: 500 - total flux cleaned = -0.00157405 Jy ! Component: 550 - total flux cleaned = -0.00173081 Jy ! Component: 600 - total flux cleaned = -0.00197234 Jy ! Component: 650 - total flux cleaned = -0.00210173 Jy ! Component: 700 - total flux cleaned = -0.00220814 Jy ! Component: 750 - total flux cleaned = -0.00237656 Jy ! Component: 800 - total flux cleaned = -0.00254193 Jy ! Component: 850 - total flux cleaned = -0.0026848 Jy ! Component: 900 - total flux cleaned = -0.00278574 Jy ! Component: 950 - total flux cleaned = -0.00294471 Jy ! Component: 1000 - total flux cleaned = -0.00304264 Jy ! Component: 1050 - total flux cleaned = -0.00310111 Jy ! Component: 1100 - total flux cleaned = -0.00321635 Jy ! Component: 1150 - total flux cleaned = -0.00331106 Jy ! Component: 1200 - total flux cleaned = -0.00338595 Jy ! Component: 1250 - total flux cleaned = -0.0034602 Jy ! Component: 1300 - total flux cleaned = -0.00349684 Jy ! Component: 1350 - total flux cleaned = -0.0035876 Jy ! Component: 1400 - total flux cleaned = -0.00358764 Jy ! Component: 1450 - total flux cleaned = -0.00367681 Jy ! Component: 1500 - total flux cleaned = -0.0036945 Jy ! Component: 1550 - total flux cleaned = -0.00365972 Jy ! Component: 1600 - total flux cleaned = -0.00372928 Jy ! Component: 1650 - total flux cleaned = -0.00378107 Jy ! Component: 1700 - total flux cleaned = -0.00383206 Jy ! Component: 1750 - total flux cleaned = -0.00383196 Jy ! Component: 1800 - total flux cleaned = -0.00391564 Jy ! Component: 1850 - total flux cleaned = -0.00388236 Jy ! Component: 1900 - total flux cleaned = -0.00393198 Jy ! Component: 1950 - total flux cleaned = -0.0040135 Jy ! Component: 2000 - total flux cleaned = -0.00398107 Jy ! Component: 2050 - total flux cleaned = -0.00404562 Jy ! Component: 2100 - total flux cleaned = -0.00406163 Jy ! Component: 2150 - total flux cleaned = -0.00415693 Jy ! Component: 2200 - total flux cleaned = -0.00414107 Jy ! Component: 2250 - total flux cleaned = -0.00420377 Jy ! Component: 2300 - total flux cleaned = -0.0041883 Jy ! Component: 2350 - total flux cleaned = -0.00421922 Jy ! Component: 2400 - total flux cleaned = -0.0042654 Jy ! Component: 2450 - total flux cleaned = -0.00431114 Jy ! Component: 2500 - total flux cleaned = -0.00435654 Jy ! Component: 2550 - total flux cleaned = -0.0043416 Jy ! Component: 2600 - total flux cleaned = -0.00438647 Jy ! Component: 2650 - total flux cleaned = -0.00443094 Jy ! Component: 2700 - total flux cleaned = -0.00441611 Jy ! Component: 2750 - total flux cleaned = -0.00446022 Jy ! Component: 2800 - total flux cleaned = -0.00443112 Jy ! Component: 2850 - total flux cleaned = -0.00450342 Jy ! Component: 2900 - total flux cleaned = -0.0044604 Jy ! Component: 2950 - total flux cleaned = -0.00451765 Jy ! Component: 3000 - total flux cleaned = -0.00447506 Jy ! Component: 3050 - total flux cleaned = -0.00451745 Jy ! Component: 3100 - total flux cleaned = -0.00458744 Jy ! Component: 3150 - total flux cleaned = -0.00464322 Jy ! Component: 3200 - total flux cleaned = -0.00467086 Jy ! Component: 3250 - total flux cleaned = -0.00471242 Jy ! Component: 3300 - total flux cleaned = -0.00473975 Jy ! Component: 3350 - total flux cleaned = -0.00475339 Jy ! Component: 3400 - total flux cleaned = -0.00479397 Jy ! Component: 3450 - total flux cleaned = -0.00482102 Jy ! Component: 3500 - total flux cleaned = -0.004821 Jy ! Component: 3550 - total flux cleaned = -0.00486107 Jy ! Component: 3600 - total flux cleaned = -0.00491405 Jy ! Component: 3650 - total flux cleaned = -0.00496698 Jy ! Component: 3700 - total flux cleaned = -0.00495381 Jy ! Component: 3750 - total flux cleaned = -0.00503221 Jy ! Component: 3800 - total flux cleaned = -0.00504513 Jy ! Component: 3850 - total flux cleaned = -0.00510978 Jy ! Component: 3900 - total flux cleaned = -0.0051355 Jy ! Component: 3950 - total flux cleaned = -0.00517375 Jy ! Component: 4000 - total flux cleaned = -0.00522465 Jy ! Component: 4050 - total flux cleaned = -0.00523728 Jy ! Total flux subtracted in 4096 components = -0.0052877 Jy ! Clean residual min=-0.000794 max=0.000738 Jy/beam ! Clean residual mean=0.000001 rms=0.000216 Jy/beam ! Combined flux in latest and established models = 0.345631 Jy keep ! Adding 283 model components to the UV plane model. ! The established model now contains 349 components and 0.345631 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv117_uvs/J1322-0937_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8808 x 2.072 at -3.265 degrees (North through East) ! Clean map min=-0.0013442 max=0.31601 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv117_uvs/J1322-0937_X_map.fits wmodel /scr/pima/rv117_uvs/J1322-0937_X_map.mod ! Writing 349 model components to file: /scr/pima/rv117_uvs/J1322-0937_X_map.mod wobs /scr/pima/rv117_uvs/J1322-0937_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv117_uvs/J1322-0937_X_uvs.fits wwins /scr/pima/rv117_uvs/J1322-0937_X_map.win ! wwins: Wrote 3 windows to /scr/pima/rv117_uvs/J1322-0937_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.316013 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000215672 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.204743 0.204743 0.409487 0.818974 1.63795 3.2759 6.55179 13.1036 26.2072 52.4143 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.316 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1465.25 quit ! Quitting program ! Log file /scr/pima/rv117_uvs/J1322-0937_X_dfm.log closed on Sat Dec 9 23:44:07 2017