! Started logfile: /scr/pima/rv117_uvs/J1322-0937_S_dfm.log on Sat Dec 9 23:44:25 2017 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23275 obs /scr/pima/rv117_uvs/J1322-0937_S_uva.fits ! Reading UV FITS file: /scr/pima/rv117_uvs/J1322-0937_S_uva.fits ! AN table 1: 44 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J1322-0937 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23275e+09 8e+06 1 8e+06 ! 02 2 2.26275e+09 8e+06 1 8e+06 ! 03 3 2.35275e+09 8e+06 1 8e+06 ! 04 4 2.37275e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 74 lines of history. ! ! Reading 7920 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1322-0937_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.095970Jy sigma=18.854785 ! Fit after self-cal, rms=0.571771Jy sigma=10.636468 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.711 mas, bmaj=6.602 mas, bpa=0.02791 degrees ! Estimated noise=0.803448 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.323069 Jy ! Component: 100 - total flux cleaned = 0.393524 Jy ! Total flux subtracted in 100 components = 0.393524 Jy ! Clean residual min=-0.020203 max=0.033001 Jy/beam ! Clean residual mean=-0.000030 rms=0.006581 Jy/beam ! Combined flux in latest and established models = 0.393524 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.393524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109019Jy sigma=2.176023 ! Fit after self-cal, rms=0.109018Jy sigma=2.175983 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.279 mas, bmaj=7.69 mas, bpa=-1.318 degrees ! Estimated noise=0.476355 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, -9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0369053 Jy ! Component: 100 - total flux cleaned = 0.0574524 Jy ! Component: 150 - total flux cleaned = 0.0633847 Jy ! Component: 200 - total flux cleaned = 0.0652807 Jy ! Total flux subtracted in 200 components = 0.0652807 Jy ! Clean residual min=-0.016852 max=0.028599 Jy/beam ! Clean residual mean=-0.000041 rms=0.005732 Jy/beam ! Combined flux in latest and established models = 0.458805 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 25 components and 0.458805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094518Jy sigma=1.964826 ! Fit after self-cal, rms=0.093652Jy sigma=1.954981 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.279 x 7.69 at -1.318 degrees (North through East) ! Clean map min=-0.016022 max=0.4162 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.31 FD 0.84 HN 1.00 KP 0.97 ! LA 0.95 MK 0.94 NL 0.98 OV 0.93 ! PT 0.96 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.85 FD 0.87 HN 1.02 KP 0.99 ! LA 0.94 MK 0.93 NL 0.98 OV 0.97 ! PT 0.96 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 0.89 HN 1.03 KP 0.97 ! LA 0.98 MK 1.00 NL 1.03 OV 0.97 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.93 HN 1.02 KP 0.99 ! LA 0.98 MK 1.04 NL 0.99 OV 0.94 ! PT 0.98 SC 1.01 ! ! ! Fit before self-cal, rms=0.093652Jy sigma=1.954981 ! Fit after self-cal, rms=0.105047Jy sigma=1.414686 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.267 mas, bmaj=7.839 mas, bpa=-1.868 degrees ! Estimated noise=0.477783 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00765708 Jy ! Component: 100 - total flux cleaned = -0.00683862 Jy ! Component: 150 - total flux cleaned = -0.00581735 Jy ! Component: 200 - total flux cleaned = -0.00582755 Jy ! Total flux subtracted in 200 components = -0.00582755 Jy ! Clean residual min=-0.013387 max=0.014806 Jy/beam ! Clean residual mean=-0.000007 rms=0.003555 Jy/beam ! Combined flux in latest and established models = 0.452977 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 43 components and 0.452977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100583Jy sigma=1.368271 ! Fit after self-cal, rms=0.100445Jy sigma=1.363299 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100445Jy sigma=1.363299 ! Fit after self-cal, rms=0.080578Jy sigma=0.912398 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.271 mas, bmaj=7.793 mas, bpa=-1.693 degrees ! Estimated noise=0.475153 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00844347 Jy ! Component: 100 - total flux cleaned = -0.00829072 Jy ! Component: 150 - total flux cleaned = -0.00769763 Jy ! Component: 200 - total flux cleaned = -0.00732087 Jy ! Total flux subtracted in 200 components = -0.00732087 Jy ! Clean residual min=-0.004189 max=0.004158 Jy/beam ! Clean residual mean=0.000002 rms=0.000935 Jy/beam ! Combined flux in latest and established models = 0.445656 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 63 components and 0.445656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079482Jy sigma=0.885326 ! Fit after self-cal, rms=0.079453Jy sigma=0.882758 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5, 7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00201051 Jy ! Component: 100 - total flux cleaned = 0.00200768 Jy ! Component: 150 - total flux cleaned = 0.00211235 Jy ! Component: 200 - total flux cleaned = 0.00261174 Jy ! Total flux subtracted in 200 components = 0.00261174 Jy ! Clean residual min=-0.003746 max=0.003115 Jy/beam ! Clean residual mean=0.000003 rms=0.000810 Jy/beam ! Combined flux in latest and established models = 0.448268 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 76 components and 0.448268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079044Jy sigma=0.873907 ! Fit after self-cal, rms=0.079029Jy sigma=0.873344 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079029Jy sigma=0.873344 ! Fit after self-cal, rms=0.079868Jy sigma=0.870233 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.269 mas, bmaj=7.79 mas, bpa=-1.753 degrees ! Estimated noise=0.474707 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00229434 Jy ! Component: 100 - total flux cleaned = -0.00207984 Jy ! Component: 150 - total flux cleaned = -0.00207486 Jy ! Component: 200 - total flux cleaned = -0.00181521 Jy ! Total flux subtracted in 200 components = -0.00181521 Jy ! Clean residual min=-0.003060 max=0.002598 Jy/beam ! Clean residual mean=0.000003 rms=0.000675 Jy/beam ! Combined flux in latest and established models = 0.446453 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 83 components and 0.446453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079559Jy sigma=0.863382 ! Fit after self-cal, rms=0.079546Jy sigma=0.863076 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000668535 Jy ! Component: 100 - total flux cleaned = -0.000371376 Jy ! Component: 150 - total flux cleaned = -0.000163453 Jy ! Component: 200 - total flux cleaned = 3.08875e-05 Jy ! Total flux subtracted in 200 components = 3.08875e-05 Jy ! Clean residual min=-0.002772 max=0.002411 Jy/beam ! Clean residual mean=0.000003 rms=0.000633 Jy/beam ! Combined flux in latest and established models = 0.446484 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 91 components and 0.446484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079410Jy sigma=0.860397 ! Fit after self-cal, rms=0.079407Jy sigma=0.860322 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079407Jy sigma=0.860322 ! Fit after self-cal, rms=0.079884Jy sigma=0.858981 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.509 mas, bmaj=13.58 mas, bpa=1.979 degrees ! Estimated noise=0.589106 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000155337 Jy ! Component: 100 - total flux cleaned = 3.6053e-05 Jy ! Component: 150 - total flux cleaned = -1.47248e-05 Jy ! Component: 200 - total flux cleaned = 2.11098e-05 Jy ! Total flux subtracted in 200 components = 2.11098e-05 Jy ! Clean residual min=-0.002171 max=0.002411 Jy/beam ! Clean residual mean=0.000007 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 0.446505 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 112 components and 0.446505 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079854Jy sigma=0.858336 ! Fit after self-cal, rms=0.079849Jy sigma=0.858163 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.0717e-05 Jy ! Component: 100 - total flux cleaned = -3.18217e-05 Jy ! Component: 150 - total flux cleaned = -6.12258e-05 Jy ! Component: 200 - total flux cleaned = -0.000112747 Jy ! Total flux subtracted in 200 components = -0.000112747 Jy ! Clean residual min=-0.002156 max=0.002290 Jy/beam ! Clean residual mean=0.000007 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 0.446392 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 122 components and 0.446392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079830Jy sigma=0.857760 ! Fit after self-cal, rms=0.079827Jy sigma=0.857693 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.267 mas, bmaj=7.786 mas, bpa=-1.79 degrees ! Estimated noise=0.474199 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.267 x 7.786 at -1.79 degrees (North through East) ! Clean map min=-0.005353 max=0.41417 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.681 mas, bmaj=6.628 mas, bpa=-0.5344 degrees ! Estimated noise=0.809741 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.325544 Jy ! Component: 100 - total flux cleaned = 0.396755 Jy ! Component: 150 - total flux cleaned = 0.415275 Jy ! Component: 200 - total flux cleaned = 0.42402 Jy ! Total flux subtracted in 200 components = 0.42402 Jy ! Clean residual min=-0.003751 max=0.004379 Jy/beam ! Clean residual mean=-0.000003 rms=0.000996 Jy/beam ! Combined flux in latest and established models = 0.424021 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.424021 Jy ! Inverting map and beam ! Estimated beam: bmin=3.267 mas, bmaj=7.786 mas, bpa=-1.79 degrees ! Estimated noise=0.474199 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00785113 Jy ! Component: 100 - total flux cleaned = 0.0130539 Jy ! Component: 150 - total flux cleaned = 0.0167554 Jy ! Component: 200 - total flux cleaned = 0.0183719 Jy ! Total flux subtracted in 200 components = 0.0183719 Jy ! Clean residual min=-0.002252 max=0.002861 Jy/beam ! Clean residual mean=0.000001 rms=0.000605 Jy/beam ! Combined flux in latest and established models = 0.442392 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 48 components and 0.442392 Jy ! Inverting map ! Added new window around map position (-3, -11.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148514 Jy ! Component: 100 - total flux cleaned = 0.0021807 Jy ! Component: 150 - total flux cleaned = 0.00286962 Jy ! Component: 200 - total flux cleaned = 0.00341106 Jy ! Total flux subtracted in 200 components = 0.00341106 Jy ! Clean residual min=-0.001923 max=0.002065 Jy/beam ! Clean residual mean=0.000002 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 0.445803 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 58 components and 0.445804 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.509 mas, bmaj=13.58 mas, bpa=1.979 degrees ! Estimated noise=0.589106 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000482878 Jy ! Component: 100 - total flux cleaned = 0.000691824 Jy ! Component: 150 - total flux cleaned = 0.000782648 Jy ! Component: 200 - total flux cleaned = 0.000705898 Jy ! Total flux subtracted in 200 components = 0.000705898 Jy ! Clean residual min=-0.002215 max=0.002273 Jy/beam ! Clean residual mean=0.000006 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 0.446509 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.86751e-05 Jy ! Component: 100 - total flux cleaned = -0.00013054 Jy ! Component: 150 - total flux cleaned = -0.000186138 Jy ! Component: 200 - total flux cleaned = -0.000211818 Jy ! Total flux subtracted in 200 components = -0.000211818 Jy ! Clean residual min=-0.002097 max=0.002089 Jy/beam ! Clean residual mean=0.000006 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.446298 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 110 components and 0.446298 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.267 mas, bmaj=7.786 mas, bpa=-1.79 degrees ! Estimated noise=0.474199 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000154801 Jy ! Component: 100 - total flux cleaned = 6.00001e-05 Jy ! Component: 150 - total flux cleaned = 9.9874e-05 Jy ! Component: 200 - total flux cleaned = 0.000100626 Jy ! Total flux subtracted in 200 components = 0.000100626 Jy ! Clean residual min=-0.001913 max=0.001943 Jy/beam ! Clean residual mean=0.000003 rms=0.000500 Jy/beam ! Combined flux in latest and established models = 0.446398 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 125 components and 0.446398 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079494Jy sigma=0.851434 ! Fit after self-cal, rms=0.079453Jy sigma=0.850701 wmodel J1322-0937_S_map.mod ! Writing 125 model components to file: J1322-0937_S_map.mod wobs J1322-0937_S_uvs.fits ! Writing UV FITS file: J1322-0937_S_uvs.fits wwins J1322-0937_S_map.win ! wwins: Wrote 4 windows to J1322-0937_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000463461 Jy ! Component: 100 - total flux cleaned = 0.000784113 Jy ! Component: 150 - total flux cleaned = 0.00105961 Jy ! Component: 200 - total flux cleaned = 0.00123653 Jy ! Component: 250 - total flux cleaned = 0.00129413 Jy ! Component: 300 - total flux cleaned = 0.00137804 Jy ! Component: 350 - total flux cleaned = 0.00140511 Jy ! Component: 400 - total flux cleaned = 0.0014314 Jy ! Component: 450 - total flux cleaned = 0.00143151 Jy ! Component: 500 - total flux cleaned = 0.00148242 Jy ! Component: 550 - total flux cleaned = 0.00145738 Jy ! Component: 600 - total flux cleaned = 0.00148207 Jy ! Component: 650 - total flux cleaned = 0.0015064 Jy ! Component: 700 - total flux cleaned = 0.00148259 Jy ! Component: 750 - total flux cleaned = 0.00145936 Jy ! Component: 800 - total flux cleaned = 0.00150598 Jy ! Component: 850 - total flux cleaned = 0.00150624 Jy ! Component: 900 - total flux cleaned = 0.0015289 Jy ! Component: 950 - total flux cleaned = 0.00152899 Jy ! Component: 1000 - total flux cleaned = 0.00155134 Jy ! Component: 1050 - total flux cleaned = 0.00155151 Jy ! Component: 1100 - total flux cleaned = 0.00157333 Jy ! Component: 1150 - total flux cleaned = 0.00159447 Jy ! Component: 1200 - total flux cleaned = 0.00157338 Jy ! Component: 1250 - total flux cleaned = 0.00153225 Jy ! Component: 1300 - total flux cleaned = 0.00157361 Jy ! Component: 1350 - total flux cleaned = 0.00155318 Jy ! Component: 1400 - total flux cleaned = 0.00155312 Jy ! Component: 1450 - total flux cleaned = 0.00151322 Jy ! Component: 1500 - total flux cleaned = 0.00155264 Jy ! Component: 1550 - total flux cleaned = 0.00159162 Jy ! Component: 1600 - total flux cleaned = 0.00163 Jy ! Component: 1650 - total flux cleaned = 0.00161051 Jy ! Component: 1700 - total flux cleaned = 0.00162964 Jy ! Component: 1750 - total flux cleaned = 0.00170465 Jy ! Component: 1800 - total flux cleaned = 0.00172307 Jy ! Component: 1850 - total flux cleaned = 0.00175988 Jy ! Component: 1900 - total flux cleaned = 0.00177817 Jy ! Component: 1950 - total flux cleaned = 0.00190548 Jy ! Component: 2000 - total flux cleaned = 0.0019235 Jy ! Component: 2050 - total flux cleaned = 0.0020488 Jy ! Component: 2100 - total flux cleaned = 0.00213738 Jy ! Component: 2150 - total flux cleaned = 0.00224287 Jy ! Component: 2200 - total flux cleaned = 0.00236495 Jy ! Component: 2250 - total flux cleaned = 0.00241685 Jy ! Component: 2300 - total flux cleaned = 0.00250254 Jy ! Component: 2350 - total flux cleaned = 0.0025706 Jy ! Component: 2400 - total flux cleaned = 0.00262152 Jy ! Component: 2450 - total flux cleaned = 0.00267169 Jy ! Component: 2500 - total flux cleaned = 0.00275483 Jy ! Component: 2550 - total flux cleaned = 0.00275479 Jy ! Component: 2600 - total flux cleaned = 0.00282046 Jy ! Component: 2650 - total flux cleaned = 0.00288561 Jy ! Component: 2700 - total flux cleaned = 0.00296631 Jy ! Component: 2750 - total flux cleaned = 0.00301444 Jy ! Component: 2800 - total flux cleaned = 0.00301451 Jy ! Component: 2850 - total flux cleaned = 0.00314079 Jy ! Component: 2900 - total flux cleaned = 0.00318778 Jy ! Component: 2950 - total flux cleaned = 0.00324985 Jy ! Component: 3000 - total flux cleaned = 0.00329634 Jy ! Component: 3050 - total flux cleaned = 0.00334222 Jy ! Component: 3100 - total flux cleaned = 0.00334239 Jy ! Component: 3150 - total flux cleaned = 0.00340299 Jy ! Component: 3200 - total flux cleaned = 0.00344791 Jy ! Component: 3250 - total flux cleaned = 0.00349262 Jy ! Component: 3300 - total flux cleaned = 0.00352205 Jy ! Component: 3350 - total flux cleaned = 0.00352185 Jy ! Component: 3400 - total flux cleaned = 0.00358028 Jy ! Component: 3450 - total flux cleaned = 0.00353682 Jy ! Component: 3500 - total flux cleaned = 0.00359438 Jy ! Component: 3550 - total flux cleaned = 0.00359446 Jy ! Component: 3600 - total flux cleaned = 0.00363732 Jy ! Component: 3650 - total flux cleaned = 0.00363743 Jy ! Component: 3700 - total flux cleaned = 0.00379199 Jy ! Component: 3750 - total flux cleaned = 0.00381958 Jy ! Component: 3800 - total flux cleaned = 0.00383327 Jy ! Component: 3850 - total flux cleaned = 0.00384711 Jy ! Component: 3900 - total flux cleaned = 0.00386076 Jy ! Component: 3950 - total flux cleaned = 0.00388792 Jy ! Component: 4000 - total flux cleaned = 0.00395568 Jy ! Component: 4050 - total flux cleaned = 0.00398264 Jy ! Total flux subtracted in 4096 components = 0.00396923 Jy ! Clean residual min=-0.000743 max=0.000886 Jy/beam ! Clean residual mean=0.000002 rms=0.000249 Jy/beam ! Combined flux in latest and established models = 0.450367 Jy keep ! Adding 273 model components to the UV plane model. ! The established model now contains 398 components and 0.450367 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv117_uvs/J1322-0937_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.267 x 7.786 at -1.79 degrees (North through East) ! Clean map min=-0.0027044 max=0.41927 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv117_uvs/J1322-0937_S_map.fits wmodel /scr/pima/rv117_uvs/J1322-0937_S_map.mod ! Writing 398 model components to file: /scr/pima/rv117_uvs/J1322-0937_S_map.mod wobs /scr/pima/rv117_uvs/J1322-0937_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv117_uvs/J1322-0937_S_uvs.fits wwins /scr/pima/rv117_uvs/J1322-0937_S_map.win ! wwins: Wrote 5 windows to /scr/pima/rv117_uvs/J1322-0937_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.419267 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000247138 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.176836 0.176836 0.353673 0.707345 1.41469 2.82938 5.65876 11.3175 22.635 45.2701 90.5402 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.419 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1696.48 quit ! Quitting program ! Log file /scr/pima/rv117_uvs/J1322-0937_S_dfm.log closed on Sat Dec 9 23:44:28 2017