! Started logfile: /scr/pima/rv117_uvs/J1312-0424_X_dfm.log on Sat Dec 9 23:43:58 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv117_uvs/J1312-0424_X_uva.fits ! Reading UV FITS file: /scr/pima/rv117_uvs/J1312-0424_X_uva.fits ! AN table 1: 44 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.996465 visibilities/baseline/integration-bin. ! Found source: J1312-0424 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 74 lines of history. ! ! Reading 7892 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1312-0424_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.025147Jy sigma=19.728690 ! Fit after self-cal, rms=0.729746Jy sigma=13.978540 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7047 mas, bmaj=1.81 mas, bpa=-3.437 degrees ! Estimated noise=0.717084 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.207245 Jy ! Component: 100 - total flux cleaned = 0.254533 Jy ! Total flux subtracted in 100 components = 0.254533 Jy ! Clean residual min=-0.005953 max=0.017409 Jy/beam ! Clean residual mean=-0.000003 rms=0.001568 Jy/beam ! Combined flux in latest and established models = 0.254533 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.254533 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061644Jy sigma=1.115717 ! Fit after self-cal, rms=0.061657Jy sigma=1.115233 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0189794 Jy ! Component: 100 - total flux cleaned = 0.0282991 Jy ! Total flux subtracted in 100 components = 0.0282991 Jy ! Clean residual min=-0.003692 max=0.004256 Jy/beam ! Clean residual mean=-0.000001 rms=0.000907 Jy/beam ! Combined flux in latest and established models = 0.282833 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 7 components and 0.282833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055188Jy sigma=0.969356 ! Fit after self-cal, rms=0.055138Jy sigma=0.968072 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8825 mas, bmaj=2.075 mas, bpa=-3.192 degrees ! Estimated noise=0.424962 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00622414 Jy ! Component: 100 - total flux cleaned = 0.00882222 Jy ! Component: 150 - total flux cleaned = 0.0101372 Jy ! Component: 200 - total flux cleaned = 0.0109117 Jy ! Total flux subtracted in 200 components = 0.0109117 Jy ! Clean residual min=-0.002249 max=0.001716 Jy/beam ! Clean residual mean=-0.000001 rms=0.000432 Jy/beam ! Combined flux in latest and established models = 0.293744 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 15 components and 0.293744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054559Jy sigma=0.954519 ! Fit after self-cal, rms=0.054553Jy sigma=0.954352 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8825 x 2.075 at -3.192 degrees (North through East) ! Clean map min=-0.002012 max=0.27184 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 1.02 KP 1.01 ! LA 0.99 MK 1.01 NL 0.99 OV 0.98 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 1.01 KP 1.01 ! LA 0.98 MK 1.00 NL 0.99 OV 1.00 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 HN 1.01 KP 1.01 ! LA 1.00 MK 1.00 NL 1.00 OV 0.99 ! PT 1.00 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HN 1.00 KP 1.02 ! LA 0.99 MK 0.98 NL 0.98 OV 1.01 ! PT 1.00 SC 0.97 ! ! ! Fit before self-cal, rms=0.054553Jy sigma=0.954352 ! Fit after self-cal, rms=0.054240Jy sigma=0.951290 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.882 mas, bmaj=2.075 mas, bpa=-3.127 degrees ! Estimated noise=0.424821 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00012748 Jy ! Component: 100 - total flux cleaned = 5.46772e-05 Jy ! Component: 150 - total flux cleaned = -1.90762e-05 Jy ! Component: 200 - total flux cleaned = -5.27651e-05 Jy ! Total flux subtracted in 200 components = -5.27651e-05 Jy ! Clean residual min=-0.001870 max=0.001543 Jy/beam ! Clean residual mean=-0.000002 rms=0.000382 Jy/beam ! Combined flux in latest and established models = 0.293692 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 21 components and 0.293692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054213Jy sigma=0.950940 ! Fit after self-cal, rms=0.054208Jy sigma=0.950844 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054208Jy sigma=0.950844 ! Fit after self-cal, rms=0.054154Jy sigma=0.948981 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8816 mas, bmaj=2.077 mas, bpa=-3.149 degrees ! Estimated noise=0.424841 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000136462 Jy ! Component: 100 - total flux cleaned = 3.35305e-05 Jy ! Component: 150 - total flux cleaned = -1.73054e-05 Jy ! Component: 200 - total flux cleaned = -1.76513e-05 Jy ! Total flux subtracted in 200 components = -1.76513e-05 Jy ! Clean residual min=-0.001767 max=0.001554 Jy/beam ! Clean residual mean=-0.000003 rms=0.000359 Jy/beam ! Combined flux in latest and established models = 0.293674 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 23 components and 0.293674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054136Jy sigma=0.948757 ! Fit after self-cal, rms=0.054134Jy sigma=0.948701 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.73536e-05 Jy ! Component: 100 - total flux cleaned = -3.22405e-05 Jy ! Component: 150 - total flux cleaned = -3.25401e-05 Jy ! Component: 200 - total flux cleaned = -4.30535e-05 Jy ! Total flux subtracted in 200 components = -4.30535e-05 Jy ! Clean residual min=-0.001768 max=0.001564 Jy/beam ! Clean residual mean=-0.000003 rms=0.000358 Jy/beam ! Combined flux in latest and established models = 0.293631 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 24 components and 0.293631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054124Jy sigma=0.948595 ! Fit after self-cal, rms=0.054123Jy sigma=0.948567 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054123Jy sigma=0.948567 ! Fit after self-cal, rms=0.054121Jy sigma=0.948552 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8815 mas, bmaj=2.077 mas, bpa=-3.159 degrees ! Estimated noise=0.424849 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.01335e-06 Jy ! Component: 100 - total flux cleaned = 9.52131e-06 Jy ! Component: 150 - total flux cleaned = 9.2977e-06 Jy ! Component: 200 - total flux cleaned = 6.60228e-07 Jy ! Total flux subtracted in 200 components = 6.60228e-07 Jy ! Clean residual min=-0.001759 max=0.001582 Jy/beam ! Clean residual mean=-0.000003 rms=0.000356 Jy/beam ! Combined flux in latest and established models = 0.293632 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 25 components and 0.293632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054114Jy sigma=0.948487 ! Fit after self-cal, rms=0.054114Jy sigma=0.948470 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.03094e-05 Jy ! Component: 100 - total flux cleaned = 1.01606e-05 Jy ! Component: 150 - total flux cleaned = 2.19751e-06 Jy ! Component: 200 - total flux cleaned = 2.28415e-06 Jy ! Total flux subtracted in 200 components = 2.28415e-06 Jy ! Clean residual min=-0.001759 max=0.001587 Jy/beam ! Clean residual mean=-0.000003 rms=0.000356 Jy/beam ! Combined flux in latest and established models = 0.293634 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 29 components and 0.293634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054109Jy sigma=0.948436 ! Fit after self-cal, rms=0.054109Jy sigma=0.948426 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054109Jy sigma=0.948426 ! Fit after self-cal, rms=0.054112Jy sigma=0.948422 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.155 mas, bmaj=3.563 mas, bpa=-0.3531 degrees ! Estimated noise=0.528897 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000127233 Jy ! Component: 100 - total flux cleaned = 0.000135937 Jy ! Component: 150 - total flux cleaned = 0.000148131 Jy ! Component: 200 - total flux cleaned = 0.0001553 Jy ! Total flux subtracted in 200 components = 0.0001553 Jy ! Clean residual min=-0.001690 max=0.001507 Jy/beam ! Clean residual mean=-0.000006 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.293789 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 32 components and 0.293789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054112Jy sigma=0.948443 ! Fit after self-cal, rms=0.054112Jy sigma=0.948439 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.08618e-05 Jy ! Component: 100 - total flux cleaned = 3.85041e-05 Jy ! Component: 150 - total flux cleaned = 4.55285e-05 Jy ! Component: 200 - total flux cleaned = 5.20336e-05 Jy ! Total flux subtracted in 200 components = 5.20336e-05 Jy ! Clean residual min=-0.001688 max=0.001514 Jy/beam ! Clean residual mean=-0.000006 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.293841 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 32 components and 0.293841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054112Jy sigma=0.948459 ! Fit after self-cal, rms=0.054112Jy sigma=0.948457 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8815 mas, bmaj=2.078 mas, bpa=-3.166 degrees ! Estimated noise=0.42487 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8815 x 2.078 at -3.166 degrees (North through East) ! Clean map min=-0.00157 max=0.27166 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7041 mas, bmaj=1.811 mas, bpa=-3.39 degrees ! Estimated noise=0.716858 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.207125 Jy ! Component: 100 - total flux cleaned = 0.254706 Jy ! Component: 150 - total flux cleaned = 0.274096 Jy ! Component: 200 - total flux cleaned = 0.283654 Jy ! Total flux subtracted in 200 components = 0.283654 Jy ! Clean residual min=-0.003463 max=0.004368 Jy/beam ! Clean residual mean=-0.000001 rms=0.000845 Jy/beam ! Combined flux in latest and established models = 0.283654 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.283654 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8815 mas, bmaj=2.078 mas, bpa=-3.166 degrees ! Estimated noise=0.42487 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00596177 Jy ! Component: 100 - total flux cleaned = 0.00849832 Jy ! Component: 150 - total flux cleaned = 0.00935886 Jy ! Component: 200 - total flux cleaned = 0.00950331 Jy ! Total flux subtracted in 200 components = 0.00950331 Jy ! Clean residual min=-0.001728 max=0.001498 Jy/beam ! Clean residual mean=-0.000003 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.293158 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 17 components and 0.293158 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.155 mas, bmaj=3.563 mas, bpa=-0.3531 degrees ! Estimated noise=0.528897 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000433495 Jy ! Component: 100 - total flux cleaned = 0.000453858 Jy ! Component: 150 - total flux cleaned = 0.000469764 Jy ! Component: 200 - total flux cleaned = 0.000470099 Jy ! Total flux subtracted in 200 components = 0.000470099 Jy ! Clean residual min=-0.001703 max=0.001496 Jy/beam ! Clean residual mean=-0.000006 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.293628 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.18625e-07 Jy ! Component: 100 - total flux cleaned = -5.91925e-06 Jy ! Component: 150 - total flux cleaned = -5.82582e-06 Jy ! Component: 200 - total flux cleaned = -7.65701e-07 Jy ! Total flux subtracted in 200 components = -7.65701e-07 Jy ! Clean residual min=-0.001703 max=0.001493 Jy/beam ! Clean residual mean=-0.000006 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.293627 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 24 components and 0.293627 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8815 mas, bmaj=2.078 mas, bpa=-3.166 degrees ! Estimated noise=0.42487 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000181716 Jy ! Component: 100 - total flux cleaned = -0.00022818 Jy ! Component: 150 - total flux cleaned = -0.000226751 Jy ! Component: 200 - total flux cleaned = -0.000225897 Jy ! Total flux subtracted in 200 components = -0.000225897 Jy ! Clean residual min=-0.001788 max=0.001544 Jy/beam ! Clean residual mean=-0.000003 rms=0.000360 Jy/beam ! Combined flux in latest and established models = 0.293401 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 33 components and 0.293401 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054138Jy sigma=0.948791 ! Fit after self-cal, rms=0.054132Jy sigma=0.948709 wmodel J1312-0424_X_map.mod ! Writing 33 model components to file: J1312-0424_X_map.mod wobs J1312-0424_X_uvs.fits ! Writing UV FITS file: J1312-0424_X_uvs.fits wwins J1312-0424_X_map.win ! wwins: Wrote 1 windows to J1312-0424_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00037672 Jy ! Component: 100 - total flux cleaned = -0.000674402 Jy ! Component: 150 - total flux cleaned = -0.00075109 Jy ! Component: 200 - total flux cleaned = -0.000823967 Jy ! Component: 250 - total flux cleaned = -0.000871276 Jy ! Component: 300 - total flux cleaned = -0.0010089 Jy ! Component: 350 - total flux cleaned = -0.00109848 Jy ! Component: 400 - total flux cleaned = -0.0010986 Jy ! Component: 450 - total flux cleaned = -0.0011202 Jy ! Component: 500 - total flux cleaned = -0.00112041 Jy ! Component: 550 - total flux cleaned = -0.00114157 Jy ! Component: 600 - total flux cleaned = -0.00114192 Jy ! Component: 650 - total flux cleaned = -0.00116225 Jy ! Component: 700 - total flux cleaned = -0.00122184 Jy ! Component: 750 - total flux cleaned = -0.00124158 Jy ! Component: 800 - total flux cleaned = -0.00128018 Jy ! Component: 850 - total flux cleaned = -0.00133788 Jy ! Component: 900 - total flux cleaned = -0.00145103 Jy ! Component: 950 - total flux cleaned = -0.00141395 Jy ! Component: 1000 - total flux cleaned = -0.00148801 Jy ! Component: 1050 - total flux cleaned = -0.00159728 Jy ! Component: 1100 - total flux cleaned = -0.00165111 Jy ! Component: 1150 - total flux cleaned = -0.00165095 Jy ! Component: 1200 - total flux cleaned = -0.00170369 Jy ! Component: 1250 - total flux cleaned = -0.00168603 Jy ! Component: 1300 - total flux cleaned = -0.00170337 Jy ! Component: 1350 - total flux cleaned = -0.00168647 Jy ! Component: 1400 - total flux cleaned = -0.00166965 Jy ! Component: 1450 - total flux cleaned = -0.00161935 Jy ! Component: 1500 - total flux cleaned = -0.00163591 Jy ! Component: 1550 - total flux cleaned = -0.00163584 Jy ! Component: 1600 - total flux cleaned = -0.00163564 Jy ! Component: 1650 - total flux cleaned = -0.00157033 Jy ! Component: 1700 - total flux cleaned = -0.00160265 Jy ! Component: 1750 - total flux cleaned = -0.00155475 Jy ! Component: 1800 - total flux cleaned = -0.0015705 Jy ! Component: 1850 - total flux cleaned = -0.00153896 Jy ! Component: 1900 - total flux cleaned = -0.00149208 Jy ! Component: 1950 - total flux cleaned = -0.00146116 Jy ! Component: 2000 - total flux cleaned = -0.00141521 Jy ! Component: 2050 - total flux cleaned = -0.00147613 Jy ! Component: 2100 - total flux cleaned = -0.00143051 Jy ! Component: 2150 - total flux cleaned = -0.00141544 Jy ! Component: 2200 - total flux cleaned = -0.00137064 Jy ! Component: 2250 - total flux cleaned = -0.00137066 Jy ! Component: 2300 - total flux cleaned = -0.0012677 Jy ! Component: 2350 - total flux cleaned = -0.00137025 Jy ! Component: 2400 - total flux cleaned = -0.00132671 Jy ! Component: 2450 - total flux cleaned = -0.0012978 Jy ! Component: 2500 - total flux cleaned = -0.00132655 Jy ! Component: 2550 - total flux cleaned = -0.00132655 Jy ! Component: 2600 - total flux cleaned = -0.00127014 Jy ! Component: 2650 - total flux cleaned = -0.00128434 Jy ! Component: 2700 - total flux cleaned = -0.00135409 Jy ! Component: 2750 - total flux cleaned = -0.0013263 Jy ! Component: 2800 - total flux cleaned = -0.0013401 Jy ! Component: 2850 - total flux cleaned = -0.00127179 Jy ! Component: 2900 - total flux cleaned = -0.00139424 Jy ! Component: 2950 - total flux cleaned = -0.00135362 Jy ! Component: 3000 - total flux cleaned = -0.00139389 Jy ! Component: 3050 - total flux cleaned = -0.00134046 Jy ! Component: 3100 - total flux cleaned = -0.00135376 Jy ! Component: 3150 - total flux cleaned = -0.00135367 Jy ! Component: 3200 - total flux cleaned = -0.00141919 Jy ! Component: 3250 - total flux cleaned = -0.00140595 Jy ! Component: 3300 - total flux cleaned = -0.00139303 Jy ! Component: 3350 - total flux cleaned = -0.00139289 Jy ! Component: 3400 - total flux cleaned = -0.00137995 Jy ! Component: 3450 - total flux cleaned = -0.00137988 Jy ! Component: 3500 - total flux cleaned = -0.00137994 Jy ! Component: 3550 - total flux cleaned = -0.00140521 Jy ! Component: 3600 - total flux cleaned = -0.00143008 Jy ! Component: 3650 - total flux cleaned = -0.00144266 Jy ! Component: 3700 - total flux cleaned = -0.00141771 Jy ! Component: 3750 - total flux cleaned = -0.00139302 Jy ! Component: 3800 - total flux cleaned = -0.0014052 Jy ! Component: 3850 - total flux cleaned = -0.00140519 Jy ! Component: 3900 - total flux cleaned = -0.00141736 Jy ! Component: 3950 - total flux cleaned = -0.00146558 Jy ! Component: 4000 - total flux cleaned = -0.0014657 Jy ! Component: 4050 - total flux cleaned = -0.00139388 Jy ! Total flux subtracted in 4096 components = -0.00144145 Jy ! Clean residual min=-0.000675 max=0.000811 Jy/beam ! Clean residual mean=-0.000001 rms=0.000208 Jy/beam ! Combined flux in latest and established models = 0.29196 Jy keep ! Adding 291 model components to the UV plane model. ! The established model now contains 324 components and 0.29196 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv117_uvs/J1312-0424_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8815 x 2.078 at -3.166 degrees (North through East) ! Clean map min=-0.0011013 max=0.27197 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv117_uvs/J1312-0424_X_map.fits wmodel /scr/pima/rv117_uvs/J1312-0424_X_map.mod ! Writing 324 model components to file: /scr/pima/rv117_uvs/J1312-0424_X_map.mod wobs /scr/pima/rv117_uvs/J1312-0424_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv117_uvs/J1312-0424_X_uvs.fits wwins /scr/pima/rv117_uvs/J1312-0424_X_map.win ! wwins: Wrote 2 windows to /scr/pima/rv117_uvs/J1312-0424_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.271965 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000206286 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.22755 0.22755 0.455101 0.910202 1.8204 3.64081 7.28161 14.5632 29.1265 58.2529 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.271 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1318.39 quit ! Quitting program ! Log file /scr/pima/rv117_uvs/J1312-0424_X_dfm.log closed on Sat Dec 9 23:44:02 2017